18 April 2011

MILOTIC


350 / MILOTIC - Pokémon Papercraft
Name: Milotic
Type: Water
Species: Tender Pokémon
Height: 6.2 m (20′04″)
Weight: 162.0 kg (357.1 lbs.)
Interesting Facts: Milotic's appearance is similar to that of a sea serpent, and it is likely based on an Oarfish. Milotic’s sinuous body is mostly cream in coloration, with red eyes and three black dots down its neck. The top of its head is long, with a point at the end, and long, thin red ‘eyebrows’ extending from above its eyes and thicker, also red-colored hair-like fins draping from the sides of the head. Its lower tail is covered with blue and pink scales, with striations of black, and four large scales, blue with red spots in the middle, overlap at the tip of the tail to look like a fan. Milotic is described in the Pokédex as breathtakingly beautiful.

THE PAPER MODEL
Height: 14.8 cm/ 5.8 in
Width: 16.9 cm/ 6.7 in
Depth: 25.3 cm/ 10.0 in
Pages: 4
Pieces: 47
Level: Medium
Designer: Brandon
Photo: Carnilmo
NOTES: Build starting at the head and antennae, working down to the tip of the tail. Attach the fins with strong glue, holding them in place while they attach. Notes included.

Download: A4 / Letter

14 comments:

Anonymous said...

OH EM GEEE! ITS FRICKEN BEAUTIFUL! ^_______^

im going to build this now, pretty good timing i must say, since i just finished EXEGGCUTE, and to think I was going to build me some Kirbys. XD

Anonymous said...

This!

Great work and thank you, I've been waiting for Milotic for a long time :]

Anonymous said...

Question: Have you ever build a model using the Pepakura Viewer to print, instead of printing from the PDF given, by changing the Pepakura Viewer's print settings, to have a lineless model appeal?

I just printed out this model using the lineless PDF, but compared to the other usual lineless models, it seems that the color strays off towards the folds, and I get confused on where each point meet and end, aside from having to use a ruler to sketch it out. Any helpful solutions would be grateful, I hate building lined models. >_< The after look is not as satisfying.

Sincerely,
A pretty hipster Anonymous.

Unknown said...

I love Generation III, it is my favotite and I am so glad to see all the Hoenn Pokemon showing up here.

Iris said...

omg love it thats really my next one my fave!!

Shana said...

Woohoo i've been waiting for this model!You guys rock!

pokélara said...

I knew this week would be Milotic, a "green birdie" told me... jejejeje
;D

Anonymous said...

OMIGODOMIGODOMIGOD Finally!!!!!! *squeals* I absolutely love Milotic!!!!!

Anonymous said...

It is not reely beautiful but it is very cute. It make me sad paper buff is not here to share it with us.

Laminis Dea said...

Theres still no link through gen page, still blue :)

Anonymous said...

So no help?

-A snazzy person

thirteenfury said...

If you print from the PDO:

1. Open the file on Pepakura Viewer-->Choose the "Settings" menu.

2. Choose Print Settings-->Slide the pointer for the line transparency to 100% (this makes the outlines on the PDO completely clear)-->Close Print Settings.

3. Choose Other Settings-->Click on General Settings at the top of the box-->Change "Amount of Overflow Paint" to 0 mm from 1 mm (this keeps the color off the tabs)-->Close Other Settings.

3. Check Print Preview under the File menu to make sure it looks right on paper-->Hit Print.

I hope that helps! :)

Anonymous said...

OMG, i think i will do this! its so sexy :D

Unknown said...

I am soo building this for my brother's birthday! :D