WURMPLE

265 / WURMPLE - Pokémon Papercraft
Name: Wurmple
Type: Bug 
Species: Worm Pokémon
Height: 0.3 m (1′00″)
Weight: 3.6 kg (7.9 lbs.)
Interesting Facts: Wurmple has suction pads at the tips of its feet, which allow it to cling to glass or tree branches without slipping. It can spit white silk that turns gooey when exposed to the air. It can release poison from its tail spikes, which can weaken and poison foes. Wurmple lives in forests. It eats leaves and pulls bark off trees to feed on the sap. Taillow, Swellow, and Starly are natural predators of Wurmple.

THE PAPER MODEL
Height: 16.0 cm / 6.2 in
Width: 9.8 cm / 3.9 in
Depth: 19.9 cm / 7.8 in
Pages: 4 
Pieces: 39
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Not quite as easy as I'd like it to be, but Wurmple is definitely a spikey little worm. Start from the horns on the head, and work your way down. The spikes that are part of the body are numbered to attach as you go, and the spikes that glue on the outside of the body are numbered afterward. Close the body at the white underbelly, and then gently glue on the feet and spikes accordingly. The red spikes don't have tabs to attach, but should be pretty easy to add a thin layer of glue on the edges of the spikes and press them into place on the body. Image included for reference as to where all the spikes go as well.  

Download: A4 / Letter

CAMERUPT

323 / CAMERUPT- Pokémon Papercraft
Name: Camerupt
Type: Fire/Ground 
Species: Eruption Pokémon
Height: 1.9 m (6′03″)
Weight: 220.0 kg (485.0 lbs.)
Interesting Facts: Camerupt is a quadrupedal Pokémon that resembles a Bactrian camel. Its body contains amounts of molten lava of 18,000 °F (10,000 °C), which erupts out of its humps if the Pokémon is angered. As shown in the anime, it can become uncontrollably angry when it is struck in the face. It lives in the craters of volcanoes.

THE PAPER MODEL
Height: 15.0 cm / 5.9 in
Width: 22.7 cm / 8.9 in
Depth: 10.4 cm / 4.1 in
Pages: 7
Pieces: 50
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: The real tricky parts here are the "hair" and the way the feet connect - pay attention there and it should be smooth sailing. Build from the hair and work your way down the face, putting in its teeth once the mouth is fully formed. Work your way to the body starting with the hump, attaching the front legs and the volcanoes on its back before working any farther past the hump. When working with the feet (both front and back) each leg and foot under piece has a matching teal edge - match these up and glue the fur back to back here. The hooves should attach to the flat circular pieces, and the circular pieces match back/back with the fur strands to make a fully formed leg/foot. Keep working back, attaching the tail before closing up the body, and attach and close at the back legs.

Download: A4 / Letter

REGICE CHIBI

378 / REGICE CHIBI - Pokémon Papercraft
Name: Regice(Chibi) 
Type: Ice
Species: Iceberg Pokémon
Height: 1.8 m (5′11″)
Weight: 175.0 kg (385.8 lbs.)
Interesting Facts: In the opening sequence of The Rise of Darkrai, a Regice, Regirock, and Registeel fired Hyper Beams that combined into one. In PK18, a Regice met Pikachu and Meowth's groups at the other side of an ice bridge and sent them into a lake. A Regice appeared in a flashback in Pillars of Friendship!.

THE PAPER MODEL
Height: 8.1 cm / 3.2 in
Width: 9.6 cm / 3.8 in
Depth: 10.1 cm / 4.0 in
Pages: 2
Level: Easy
Designer: CrafterWong
Photo: CrafterWong's Regice can be found here!

NOTES: Build the grey parts of the head first located on page one. Then build, the inside the black part and finally free hand glue the face part to the head. You will need to trim the bottom part of the face so that it fits snuggly together. Finish building downward. In order to get the model to stand by itself, I flipped the pyramids inside out. Besides that, I hope you enjoy building and stay tune!

CrafterWong's Regice can be found here! 

REGIROCK CHIBI

377 / REGIROCK CHIBI - Pokémon Papercraft
Name: Regirock (Chibi) 
Type: Rock
Species: Rock Peak Pokémon
Height: 1.7 m (5′07″)
Weight: 230.0 kg (507.1 lbs.)
Interesting Facts: Regirock debuted alongside the other members of its trio in Lucario and the Mystery of Mew. It is a guardian of the Tree of Beginning, and it was the first to attack perceived intruders Ash and his friends. In the end, Regirock and the other guardians realized they were not a danger and kept on with protecting the Tree of Beginning.

THE PAPER MODEL
Height: 8.5 cm / 3.4 in
Width: 10.2 cm / 4.0 in
Depth: 6.2 cm / 2.4 in
Pages: 2
Level: Easy
Designer: CrafterWong
Photo: CrafterWong's Regirock can be found here!

NOTES: Build the model head down and attach the arms and back pieces before you close the model. Close the model with the piece with no tabs on the first page. This should be the piece with no tabs that you would glue behind the legs. Lastly, this model can naturally stand with a slight angle. If you want the model to stand up close to 90 degrees, use the arms as a way to get the model to stand properly.

CrafterWong's Regirock can be found here! 

MEGA-GLALIE

362 / MEGA GLALIE - Pokémon Papercraft
Name: Mega Glalie
Type: Ice
Species: Face Pokémon
Height: 2.1 m (6′11″)
Weight: 350.2 kg (772.1 lbs.)
Interesting Facts: Mega Glalie's jaw is dislocated because of the overwhelming energy, causing its mouth to extend to the length of its face. The lower jaw is all black except for two light-blue, conical, icy spikes. The pupils in Mega Glalie's eyes are now red instead of black. The horns on top Mega Glalie's head have been partially turned into ice, with the addition of a third horn on its forehead.

THE PAPER MODEL
Height: 16.5 cm / 6.5 in
Width: 14.3 cm / 5.6 in
Depth: 15.5 cm / 6.1 in
Pages: 11
Pieces: 65 (Lots of spikes)
Level: Medium
Designer: Brandon
Photo: CrafterWong
Chibi Mega Glalie pictured can also be found here!
NOTES: Build the top of the head first. Then build the inner and upper part of the mouth as well as the tongue and piece 20 before working outward. Attach the mouth to the head once the two sections  are built. Next, build the rest of the outer part of the mouth besides piece 26. Glue all the exterior pieces to the model. Once everything is attached, glue piece 26 to the mouth at the bottom, closing the model. Pay close attention to spikes 31, 32, and 35 that go on top of piece 26 as these spikes create a tripod allowing the model to stand by itself. Besides that, I hope you enjoy building.

Download: A4 / Letter

Chibi Mega Glalie pictured can also be found here!

(Snorunt has since shrunk a bit) 

GLALIE (Happy Holidays p2!)

362 / GLALIE - Pokémon Papercraft
Name: Glalie
Type: Ice
Species: Face Pokémon
Height: 1.5 m (4′11″)
Weight: 256.5 kg (565.5 lbs.)
Interesting Facts: Glalie is a spherical Pokémon that consists of a black rock core covered by ice. The icy covering has several holes and spaces across this Pokémon's body. Blue eyes and a mouth with flat teeth are visible through three of these holes. There are two large, black, conical horns on either side of Glalie's head.

THE PAPER MODEL
Height: 15.4 cm / 6.1 in
Width: 18.0 cm / 7.1 in
Depth: 14.3 cm / 5.6 in
Pages: 5
Pieces: 30
Level: Easy
Designer: Brandon
Photo: CrafterWong
Chibi Glalie pictured can also be found here!
NOTES: Pretty straightforward - build downwards attach the divots (The black sections that go concave into the body) as you build the body. Close the model with pieces 29 and 30.

Download: A4 / Letter

Chibi Glalie pictured can also be found here!

SNORUNT (Happy Holidays p1!)

361 / SNORUNT- Pokémon Papercraft
Name: Snorunt
Type: Ice
Species: Snow Hat Pokémon
Height: 0.7 m (2′04″)
Weight: 16.8 kg (37.0 lbs.)
Interesting Facts: Well-adapted to life in colder climates, it subsists on snow and ice and can survive temperatures as low as -150 degrees Fahrenheit. Snorunt is also a social creature, living and traveling with other Snorunt in groups of five. It can be found in caves, particularly when the outside weather lacks snow. Additionally, it has been known to visit human dwellings.

THE PAPER MODEL
Height: 10.2 cm / 4.0 in
Width: 9.2 cm / 3.6 in
Depth: 8.0 cm / 3.2 in
Pages: 4
Pieces: 32
Level: Easy
Designer: Brandon
Photo: CrafterWong
Chibi Snorunt pictured can also be found here!
NOTES: Pretty straightforward - build the inside of the Snorunt's yellow 'tent' part first and then build around then down. Close the shell with the semi-circular ring at the bottom. Build the darker body top down, attaching the hands and feet after closing it. Plop the tent over the body directly to finish. 

Download: A4 / Letter

Chibi Snorunt pictured can also be found here!

BALTOY

343 / BALTOY- Pokémon Papercraft
Name: Baltoy
Type: Ground/Psychic
Species: Clay Doll Pokémon
Height: 0.5 m (1′08″)
Weight: 21.5 kg (47.4 lbs.)
Interesting Facts: Baltoy is a small Pokémon that resembles a tan figurine made out of clay or mud. There are arching, red markings over its eyes, which usually appear closed. A red stripe encircles its body, and forms a ring on its belly. It has flat appendages that resemble arms. A spike protrudes from the top of its head and another, smaller spike under its body.

THE PAPER MODEL
Height: 14.6 cm / 5.8 in
Width: 12.6 cm / 5.0 in
Depth: 6.9 cm / 2.7 in
Pages: 3
Pieces: 21
Level: Easy
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Pretty straightforward - just work from the top of the head and work your way down. Connect the arms once the first piece of the body is on, then keep working down and close at the bottom of the "top". Base included to assist, and base textures are separately selected in the PDO as well (just in case you want a shiny base, with a regular body) 

Download: A4 / Letter

LATIOS V2

381 / LATIOS v2 - Pokémon Papercraft
Name: Latios
Type: Dragon/Psychic
Species: Eon Pokémon
Height: 2.0 m (6′07″)
Weight: 60.0 kg (132.3 lbs.)
Interesting Facts: Latios is a Pokémon with a birdlike body stylized after a plane. Its body flows slowly into a thick neck, giving it a bulky appearance. It has no legs, usually floating instead. Most of its body is blue, with white areas near its arms and a white stripe on its back that extend up to its head. Jet-plane wings sit on top of its back, while two tall, jagged fins point behind it from its rear. A red triangle marks the center of its chest, while a blue mask partially covers its face.

THE PAPER MODEL
Height: 16.5 cm / 6.5 in
Width: 19.5 cm / 7.7 in
Depth: 23.9 cm / 9.4 in
Pages: 5
Pieces: 70
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Start from the head, work your way back - be extra careful attaching the arms and the wings, especially since they're pretty close to each other. Close at the butt,  ending on piece 68. 69-70 are an optional base, but will certainly help it stay on a sort of pedestal. 

Download: A4 / Letter

TORKOAL

324 / TORKOAL - Pokémon Papercraft
Name: Torkoal
Type: Fire
Species: Coal Pokémon
Height: 0.5 m (1′08″)
Weight: 80.4 kg (177.2 lbs.)
Interesting Facts: Torkoal is a tortoise-like, quadruped Pokémon. It has a large, black, rock-like shell with holes that glow with a red warmth. Its skin is reddish brown with gray-black bands on its legs and neck. It has a long neck and its eyes seem permanently closed. Torkoal lives in mountains and volcanic areas, where it looks for large deposits of coal. It uses the coal to fill the hollow spaces in its shell, and then burns it for energy.

THE PAPER MODEL
Height: 10.0 cm / 3.9 in
Width: 22.8 cm / 9.0 in
Depth: 16.9 cm / 6.7 in
Pages: 6
Pieces: 69
Level: Easy-Medium
Designer: Brandon
Photo: Picture received from César R via email!
NOTES: The shell 'ridge' along the bottom is probably the toughest part here - once you get past that it's pretty smooth sailing. Start from the head, work your way back to the shell and body, and close at the bottom of the flat feet. 

Download: A4 / Letter

MEGA RAYQUAZA

384 / MEGA RAYQUAZA- Pokémon Papercraft
Name: Mega Rayquaza
Type: Dragon/Flying
Species: Sky High Pokémon
Height: 10.8 m (35′05″)
Weight: 392.0 kg (864.2 lbs.)
Interesting Facts: In Hoopa and the Clash of Ages, a Shiny Rayquaza capable of Mega Evolving was summoned alongside Latios and Latias by Hoopa to protect it from the shadow Hoopa Unbound. The trio protected Hoopa from the shadow Hoopa and its reinforcements, Primal Groudon, Primal Kyogre, Dialga, Palkia, Giratina, and Kyurem, in Dahara City. Eventually, the battle ended after the shadow Hoopa was sealed in a Prison Bottle, and Rayquaza departed for its home. 

THE PAPER MODEL
Height: 24.9 cm / 9.8 in
Width: 16.1 cm / 6.3 in
Depth: 31.5 cm / 12.4 in (due to various long ribbons)
Pages: 9, +2 for instructions/reference
Pieces: 128
Level: Hard
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative! 

            This one was sent in by Lance via our email! 
NOTES: Various instructions included on template, along with numbers. Definitely follow the numbers and work your way from the head down. The body segments work exactly the same as our regular Rayquaza model (with a little more detail)- match up the number, and everything flows well together. The fins and 'ribbon' segments might be the most difficult part to connect just right, and using a reference (such as the Official Art picture on the last page of the model) to see how everything connects should help. Putting wire inside the 'ribbons' (the last few pages) can help with getting them to pose just right as well.  Definitely no need to print the last 2 pages, as those are all instructions and reference. Overall this is a fairly tough model, and you should take your time building it to get things just right, especially with the smaller parts. PDO reference, if possible, is extremely helpful.

Download: A4 / Letter

NOSEPASS

299 / NAME - Pokémon Papercraft
Name: Nosepass
Type: Rock
Species: Compass Pokémon
Height: 1.0 m (3′03″)
Weight: 97.0 kg (213.8 lbs.)
Interesting Facts: Nosepass is a blue, angular bipedal Pokémon that closely resembles the Easter Island Heads. The red triangular nose is highly magnetic, functioning as an electromagnet, always pointing North. It aso stops Nosepass from coming near each other, since they would repel themselves. The magnetism is stronger during the winter. It has arms and legs without any visible joints and small, circular holes on the undersides. Its arms resemble compass needles. The eyes are covered by dark, somewhat mask-like markings, have the appearance of being closed. They live in caves and use the electromagnetism to sraw iron objects to its body when in danger and to capture prey. They only moves a little over 3/8 of an inch each year.

THE PAPER MODEL
Height: 14.5 cm / 5.7 in
Width: 25.8 cm / 10.1 in
Depth: 14.8 cm / 5.8 in
Pages: 5
Pieces: 28
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start the model at the top of the head and close at the bottom. Make sure to be cereful and follow the instructions around the nose, that's the hardest part. You can either glue the arms or use magnets to hold them in place. Must fold lines are indicated in green. Once the legs have been built, palce them on a flat surface in a position that resembles the pdo, put glue on top of them and place the body, leaving it still to dry. Numbers and further instructions on the pdo.

Download: A4 / Letter

MASQUERAIN

284 / MASQUERAIN - Pokémon Papercraft
Name: Masquerain
Type: Bug/Flying
Species: Eyeball Pokémon
Height: 0.8 m (2′07″)
Weight: 3.6 kg (7.9 lbs.)
Interesting Facts: Masquerain is a light-blue Pokemon with wings that allow it to fly in any direction, but not if wet. The head has a teardrop shape with black eyes and white pupils. It has a pair of angry antennaes, which resemble a pair of angry eyes, which are used to intimidate its enemies. When under rainy weather, the antennaes become heave and the eye patterns seem droopy. It will shelter itself under trees to protect the wings and antennaes.

THE PAPER MODEL
Height: 19,9 cm / 7.8 in
Width: 30.7 cm / 12.1 in
Depth: 10.4 cm / 4.1 in
Pages: 4
Pieces: 28 (2D wings)/30 (3D wings)
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: The model is made out of two balls, build them both separated and glue them before gluing the wings. Glue the smaller wings before the big ones. There are 3D wings (not pictured) and 2D ones as well, choose which ones you'll build and print only the pages for them: the 3D ones are on pages 6 and 7 and the 2D ones on pages 4 and 5.

Download: A4 / Letter

MEGA SABLEYE

302 / MEGA SABLEYE - Pokémon Papercraft

Name: Sableye (Mega)
Type: Dark/Ghost
Species: Darkness Pokémon
Height: 0.5 m (1'08")
Weight: 11.0 kg (24.3 lbs.)
Interesting Facts: As Mega Sableye, all the energy from its Mega Evolution is concentrated into the red jewel on its chest, causing it to detach from Sableye's body and significantly increase in size; the detached jewel leaves a small hole in Mega Sableye's chest. Its ears elongate, and it gains a spike on the top of its head. Its teeth turn from white to yellow, and its eyes also change from pale blue to a crimson red, with diagonal slits at their inner edges. The enlarged jewel is said to boast such incredible hardness that no attack can even leave a scratch on it. During battle, Mega Sableye shelters itself behind the jewel, from where it can take advantage of any openings its target leaves exposed.

THE PAPER MODEL
Height: 19.0 cm / 7.48 in
Width: 17.6 cm / 6.93 in
Depth: 15.4 cm / x.x in
Pages: 5
Pieces: 58
Level: Medium
Designer: Olber
Photo: Olber
NOTES: This model is pretty simple to build. Just refer to pdo file to get more orientation. Start at the main spike on its head, then the ears. Build the head top making your way down; attach the ears in the progress. Fold the jewel pieces in order to get well shaped jewels. Glue them before you attach the legs. By the way, you got to attach the legs before closing the model at the "close here" piece. To get the giant jewel sticked to Sableye, use a drop of glue in the rigth arm first finger. Laying the model face up may be useful, in order you let the glue dry. When it's full dried, make it stand and place it correctly.

Download: A4 / Letter

MEGA LATIOS

381 / M Latios - Pokémon Papercraft
Name: M Latios
Type: Dragon/Psychic
Species:  Eon Pokémon
Height: 2.3 m (7'07")
Weight: 70.0 kg (154.3 lbs.)
Interesting Facts: Latios made its debut appearance in Pokémon Heroes. Annie and Oakley captured Latios and used it to power the Defense Mechanism of Alto Mare along with the stolen Soul Dew. Latios ended up sacrificing itself to save Alto Mare from an enormous tidal wave.

THE PAPER MODEL
Height: 16.0 cm/6.3 in
Width: 44.8 cm/17.6 in
Depth: 28.9 cm/11.4 in
No. of Pages: 10 (Including Base)
No. of Pieces: 71
Level: Medium
Designer: Brandon
Photo: LuIS

NOTES: Start at the head and build by numbers until you get to the tail, glue the arms (using the base as a tool to glue them on the right position) and only after close. It's important to note that the arms are very heavy and the tube that holds them to the body is very small, so it may collapse if not reinforced with a tube of rolled paper inserted inside. The is not as hard as it seems, take your time, join one at a time to the hand and you'll be fine. The medium-hard for Mega Latias is due to the hands, the pieces get small, and a bit harder to build, but besides that shouldn't be too hard. Further instructions included on the template.

Base, Soul Dew, and Mega Stones included, as well as eye textures for Latias. The only difference for Latias is eye, and size.

Download: A4 / Letter

PELIPPER

279 / PELIPPER - Pokémon Papercraft
Name: Pelipper
Type: Water/Flying
Species: Water Bird Pokémon
Height: 1.2 m (3'11")
Weight: 28.0 kg (61.7 lbs.)
Interesting Facts: Pelipper is a pelican-like Pokémon with no discernible neck. Its head and bill make up the majority of its body. It has white feathers, a yellow underbelly, and a blue head crest. Its large wings have three digits and blue wing tips. It has small, blue webbed feet, a short tail, and eyes that are made of two black semi-circles. It has a large bill and a throat pouch that it uses to carry small Pokémon and eggs and scoop food from the sea. It searches for food by skimming across the wave tops. After scooping the food, Pelipper swallows it in one big gulp. It builds its nest on steep cliffs facing the sea.

THE PAPER MODEL
Height: 14.2 cm/5.6 in
Width: 19.6 cm/ 7.7 in
Depth: 22.9 cm/9.0 in
No. of Pages: 7
No. of Pieces: 34
Level: Easy/Medium
Designer: Brandon
Photo: LuIS
NOTES: Start at the top of the head and close at the tip of the tail. Be sure to build the entire mouth before gluing it to the face. The wings are the only hard part, but as long as you fold the lines indicated in red it will build fairly simply. When gluing the feet, place the left wing on a flat surface and glue the feet on the same level so it stands better. You can use magnets to hold the bill instead of gluing it (to make it into a storage container of sorts), just place one inside the bill before closing and glue one to the place where it connects to the body.

Download: A4 / Letter

EXPLOUD

295 / EXPLOUD - Pokémon Papercraft
Name: Exploud
Type: Normal
Species: Loud Noise Pokémon
Height: 1.5 m (4'11")
Weight: 84.0 kg (185.2 lbs.)
Interesting Facts: Exploud is a large blue bipedal Pokémon with a large mouth. It has two peg-like teeth on each jaw. It has protruding tubes with holes along its body: seven along the crest on its head, four on its elbows and knees, two along its back, and two on the end of its two tails. Exploud's bellowing is capable of triggering earthquakes and can be heard from over six miles away. It only raises its voice when it is in battle. It communicates its feelings to others by producing whistle-like sounds. It lives in caves.

THE PAPER MODEL
Height: 16.5 cm/6.5 in
Width: 15.7 cm/ 6.2 in
Depth: 17.6 cm/6.9 in
No. of Pages: 5
No. of Pieces: 42
Level: Medium
Designer: PMF
Photo: LuIS
NOTES: Start at the top of the head, build the tubes first and the face around them. The mouth is glued after the first piece of the back is glued. Glue pieces 17 and 20 to the arms after the first segments of pieces 16 and 19 are built. The parts under the mouth (22 and 23) can get tricky, start them at the bottom of the lips. Close at the tip of the tails.

Download: A4 / Letter

MEGA BLAZIKEN

257 / M-BLAZIKEN - Pokémon Papercraft
Name: Mega Blaziken
Type: Fire/Fighting
Species: Blaze Pokémon
Height: 1.905 m (6'03")
Weight: 52.1 kg (114.6 lbs.)
Interesting Facts: As Mega Blaziken, it loses its yellow markings, and gains black markings on its upper legs and chest. Its hair like feathers take on a wing-like shape and point upward, and the portion around its chest is rough around its shoulders. The crest on its head changes into a flat horn that curves backward. The fire it creates on its wrists is now longer, as well.

THE PAPER MODEL
Height: 19.8 cm/7.8 in
Width: 15.8 cm/ 6.2 in
Depth: 11.1 cm/4.4 in
No. of Pages: 3
No. of Pieces: 74
Level: Medium-Hard
Designer: Brandon
Photo: LuIS
NOTES: The model starts at the belly and at the hair. Start at the legs, but close only the standing one now. Make sure to follow the instructions of when to glue each detail, specialy at the top with the arms and some fur. Close the torso at the bottom of it and glue to the legs. Make sure to reinforce the standing leg with some scrap paper glued into it. The model will need some weight to stand, so keep one leg open and only AFTER the ENTIRE model is glued together, put weight inside so it stands properly, close the leg after it's balanced and glue the details to it. There's a base with it, it should prevent the leg fur from beeing damaged from the weight. Numbers and further instructions included on the template.

Download: A4 / Letter

BLAZIKEN V2

257 / BLAZIKEN - Pokémon Papercraft
Name: Blaziken
Type: Fire/Fighting
Species: Blaze Pokémon
Height: 1.905 m (6'03")
Weight: 52.1 kg (114.6 lbs.)
Interesting Facts: Blaziken was first seen in Pop Goes The Sneasel. Harrison used it to defeat the Sneasel that was blocking access to the flame of Ho-Oh. Harrison later used Blaziken in a climactic battle with Ash's Charizard.

THE PAPER MODEL
Height: 19.8 cm/7.8 in
Width: 19.3 cm/ 7.6 in
Depth: 11.8 cm/4.6 in
No. of Pages: 4
No. of Pieces: 76
Level: Hard
Designer: Brandon
Photo: LuIS
NOTES: The model had two start points, both being at the torso. Start by the legs, only don't close that part just yet. The torso is where parts can get complicated, the fur and the hair being the hardest parts of the model. There are plenty of notes and colored references on the template, I suggest using them all. The model can't stand on it's own, so weight is necessary, put it inside, BEFORE closing the legs and only AFTER the ENTIRE model is glued together, close the leg after it's balanced and glue the details to it. Also note that the standing leg MUST be reinforced from the inside, do so by gluing pieces of scrap paper into it. There's a base with it, it should prevent the leg fur from being damaged from the weight. Numbers and further instructions included on the template.

Download: A4 / Letter

GROVYLE

253 / Grovyle- Pokémon Papercraft
Name: Grovyle
Type: Grass
Species: Wood Gecko Pokémon
Height: 0.9 m (2'11")
Weight: 21.6 kg (47.6 lbs)
Interesting Facts: In the manga: The Treecko meant to be handed to Emerald was recovered by Wally and became a Grovyle to rescue his temporary owner when a wild Dusclops threatened to suck them into its infinite cavity. After a few more weeks of training at the Sky Pillar under Norman, it was able to awaken the ancient legendary Pokémon Rayquaza, but the huge gust of wind sent it flying miles away into a distant island where it evolved again to a Sceptile and was this time caught by Guile Hideout, who smuggled it into the Battle Factory to try to drive the nosy press away. It ended up being stolen by its legitimate owner, Emerald, and became a fixed member of his team.

THE PAPER MODEL
Height: 17.2 cm/ 6.8 in
Width: 18.5 cm/ 7.3 in
Depth: 18.1 cm/ 7.1 in
No. of Pages: 4
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: Start from the top of the head, working your way down. Attach the leaves when possible. Layer the leaves similar to the build picture, using it as reference if you can't use the pdo. Close at the feet.

Download: A4 / Letter