GASTRODON

423 / GASTRODON - Pokémon Papercraft

Name: West Sea Gastrodon
Type: Ground / Water
Species: Sea Slug Pokémon
Height: 0.9 m (2'11")
Weight: 29.9 kg (65.9 lbs.)
Interesting Facts: Like its pre-evolution, there are two forms of Gastrodon: West Sea (pink and brown) and East Sea (blue and green), and they are found in the two halves of Sinnoh. It has three eyes in front of its head and two horns protruding from the sides of its head. These might be its antennae used to sense its surroundings. To do this, it waves its head side to side as if it were dancing. If any part of a Gastrodon's boneless body is ever ripped or torn off, it can grow back in very little time. It evolves from Shellos starting at level 30.

THE PAPER MODEL
Height: 22.0 cm/8.7 in
Width: 13.9 cm/ 5.5 in
Depth: 21.1 cm/8.3 in
Pages: 9
Pieces: 75
Level: Medium-Hard
Designer: POdragon
Photo: Skelekitty
NOTES: Build by numbers. Start at the horns, then the head and insert the horns into the appropriate gaps - pay attention to the seam alignment. Then continue down the neck and finish off the shell. Glue the two sides of each ribbon together and attach them to the shell, from the neck down the body and then join them together. Continue down the underside of the body and close model at the belly with good glue.

Download: A4 / Letter



Name: East Sea Gastrodon
Type: Ground / Water
Species: Sea Slug Pokémon
Height: 0.9 m (2'11")
Weight: 29.9 kg (65.9 lbs.)
Interesting Facts: Like its pre-evolution, there are two forms of Gastrodon: West Sea (pink and brown) and East Sea (blue and green), and they are found in the two halves of Sinnoh. It has three eyes in front of its head and two horns protruding from the sides of its head. These might be its antennae used to sense its surroundings. To do this, it waves its head side to side as if it were dancing. If any part of a Gastrodon's boneless body is ever ripped or torn off, it can grow back in very little time. It evolves from Shellos starting at level 30.

THE PAPER MODEL
Height: 22.0 cm/8.7 in
Width: 13.5 cm/ 5.3 in
Depth: 21.4 cm/8.4 in
Pages: 10
Pieces: 85
Level: Medium-Hard
Designer: POdragon
Photo: Skelekitty
NOTES: Build by numbers. Start at the horns and attach the head to it piece by piece. Continue down the neck and attach the shell, moving in an outward direction. Glue the two sides of each ribbon together, and attach it to the shell from the neck down the body, joining the two sections together at the bottom. Continue down the underside of the body and close model at the belly with good glue.

Download: A4 / Letter