REGIGIGAS CHIBI

895 / REGIGIGAS CHIBI - Pokémon Papercraft
Name: Regigigas (Chibi) 
Type: Normal
Species: Colossal Pokémon
Height: 3.7 m (12′02″)
Weight: 420.0 kg (925.9 lbs.)
Interesting Facts: Regigigas is a skilled craftsman. It created golems out of inanimate objects and elemental energies, bringing them to life. Regigigas is also capable of controlling these Legendary titans, even if they already belong to a Trainer. It can also survive extreme conditions as it is able to work with the boiling temperatures of magma (1300-2400 °F [700-1300 °C]) as well as frigid ice (-328 °F [-200 °C]). When Regigigas is disturbed from its slumber, it goes on a rampage and shoots powerful beams of energy.

THE PAPER MODEL
Height: 11.4 cm / 4.5 in
Width: 8.2 cm / 3.2 in
Depth: 18.1 cm / 7.1 in
Pages: 3
Pieces: 27
Level: Easy
Designer: Brandon
Photo: CrafterWong (Site can be found here!)

NOTES: Build the model from the head down attaching the arms and shoulder pieces as you go down. Close the model with a leg or the piece behind the leg (#27). This model will not stand by itself so you will need build the stand, build Snowpoint Temple (included, with open PDO for easy scaling if desired), or have to lean up against something. Besides that I hope you enjoy building! 

Download: A4 / Letter

CrafterWong's Site can be found here! 

Links to the other Regis as well: 

Regirock  -  Regice  -  Registeel  -  Regidrago  -  Regieleki 

BASTIODON

411 / BASTIODON - Pokémon Papercraft
Name: Bastiodon
Type: Rock/Steel
Species: Shield Pokémon
Height: 1.3 m (4′03″)
Weight: 149.5 kg (329.6 lbs.)
Interesting Facts: Bastiodon is from roughly 100 million years ago. Despite its rough, intimidating appearance, Bastiodon is actually a docile, caring Pokémon that feeds on grass and Berries. Its steel-hard, shield-like face is capable of repelling any attack. When multiple Bastiodon line up, their faces form a wall that nothing can break through; this was how they protected their young. In stark contrast to its impenetrable frontal defense, it is vulnerable from behind. It seems to have lived in the same habitats as Rampardos, as evidenced by their fossils often being found together.

THE PAPER MODEL
Height: 14.0 cm / 5.5 in
Width: 14.6 cm / 5.7 in
Depth: 21.5 cm / 8.5 in
Pages: 6
Pieces: 53
Level: Easy-Medium
Designer: Brandon
Photo: CrafterWong (along with their Chibi Bastiodon pictured, which can be found here!)
NOTES: The head, body and legs are all separate pieces here to make it a bit easier to assemble everything at the end. In theory you can start with whichever set of pieces, but I would start with the head (still following the numbers), assemble the body, then finish out with the feet. Before gluing anything together go ahead and place the feet with the body to get a feel of how things go together, then start gluing the legs onto the feet. Attach the head to the neck next, being sure it's stable. The teeth and tusks can go on whenever as well, placing as shown in pictures/pdo. 

 

Download: A4 / Letter

You can also find the Chibi Bastiodon by CrafterWong at their site here! 

ELECTIVIRE

466 / ELECTIVIRE - Pokémon Papercraft
Name: Electivire
Type: Electric
Species: Thunderbolt Pokémon
Height: 1.8 m (5′11″)
Weight: 138.6 kg (305.6 lbs.)
Interesting Facts: Electivire is known to be recklessly careless regarding enemy attacks. It uses its tails to make contact with its opponents, and shocks them with over 20,000 volts. Blue sparks fly between its antennae as its electric charge amplifies. Electivire usually feed off electric currents. In the anime Electivire has been seen eating fruits from trees.

THE PAPER MODEL
Height: 17.2 cm / 6.8 in
Width: 24.8 cm / 9.8 in
Depth: 12.9 cm / 5.1 in
Pages: 7
Pieces: 76
Level: Medium
Designer: Brandon
Photo: Luis
NOTES: Start at the top of the head and close between the legs. There are many lines that should be folded, they are indicated with color, also, there are many other references indicated with colors. Be careful around the shoulders, since this part don't use tabs, more instructions about this part (and many others) included on the templates. Glue the tail and the feet only after the model is closed. The arms should be glued when the instructions say, so you can apply pressure from the inside. Some reference pictures are included, they show the placement of fingers and some other parts.

Download: A4 / Letter

MEGA GALLADE

475 / MEGA GALLADE - Pokémon Papercraft
Name: Mega Gallade
Type: Fighting/Psychic
Species: Blade Pokémon
Height: 1.6 m (5′03″)
Weight: 56.4 kg (124.3 lbs.)
Interesting Facts: When Gallade mega evolves, it gets red plates on its arms, and the helmet and cape-like protrusions on its head and back give it a knightly appearance. If the situation demands, it can use its psychic power to reshape both arms into blades, and fight using a dual-wielding style. Its upper body becomes white, and the spikes on its head elongate.

THE PAPER MODEL
Height: 22.0 cm / 8.6 in
Width: 21.8 cm / 8.5 in
Depth: 15.2 cm / 5.9 in
Pages: 6
Pieces: 67
Level: Medium-Hard
Designer: LuIS
Photo: LuIS
NOTES: Start by building the head, make sure to follow the numbers, it's the best way to build it. After the head is built, slide the head details by the side and glue the bigger one by the tips and the smaller ones on the side. The head and the body are separated, so put the head aside and proceed to the body. Start at the neck , build the arms and reinforce them inside. Now proceed to the cape, it's the hardest thing on the model and there's a small trick. First you'll build the white parts and glue them to the red piece that goes in between, than you'll glue the green, leaving the tabs of the green parts to connect to the body and reinforce the inside. I would still recommend you reinforce a bit more than just this tab. Close the body at the bottom. For the "hands" first build the red part and build the white ones around it. The connection is the same for the small and the big details. The legs are the last part. Start them at the bottom and build up. Make sure to reinforce them too. Gluing them will take a lot of patience, refer to the .pdo for reference, hold them in place while they dry. I didn't need any weight to make it stand, but it tilts a bit if a strong wind hits, so you may wanna put some weight inside the legs. Further instructions on the template.

Download: A4 / Letter

BONSLY - MERRY CHRISTMAS!

438 / BONSLY - Pokémon Papercraft
Name: Bonsly
Type: Rock
Species: Bonsai Pokémon
Height: 0.5 m (1′08″)
Weight: 15 kg (33.1 lbs.)
Interesting Facts: Bonsly is a round, brown Pokémon, with the top of its head resembling a club. It has a rim around its body and three yellow spots on its face, two of which are the eyes. It also has small legs and toothless feet. Bonsly has a hole on its rear, similar to the ones on flowerpots. It is a good mimic, which causes it to get mistaken often with a real bonsai tree. It can stay on the same spot for a long time. It has the habit of crying, not because of sadness, but for the excess of moisture in its body. It prefers dry areas, but can also be found in gardens.

THE PAPER MODEL
Height: 16.0 cm / 6.2 in
Width: 7.2 cm / 2.8 in
Depth: 10.6 cm / 4.1 in
Pages: 3
Pieces: 25
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start building at the top of the body, closing the segments and gluing them as soon as they are built. Use a pen to round the pieces, giving them a more round shape. The balls are next, glue them to the body BEFORE gluing the feet. Make sure to reinforce the connection between 22/24 and 23/25. Mine stands, but if you feel it might fall, put some weight inside the feet before closing.

Download: A4 / Letter

MOTHIM

414 / MOTHIM - Pokémon Papercraft
Name: Mothim
Type: Bug/Flying
Species: Moth Pokémon
Height: 0.9 m (2′11″)
Weight: 23.3 kg (51.4 lbs.)
Interesting Facts: Mothim is a moth like Pokemon with two sets of wings, with oval markings on them. It has antennaes running along the edges before extending and widening above its head. The body is black with a stripe on it. It also has a gray stripe down on the back. It has legs and a black split tail. It is a nomadic, nocturnal that searchs for honey and nectar, but instead of gathering honey on its own, it hives of Combees. It's a male only species, the female counterpart beeing Wormadam.

THE PAPER MODEL
Height: 15 cm / 5.9 in
Width: 33.1 cm / 13 in
Depth: 8.1 cm / 3.2 in
Pages: 3
Pieces: 41
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start the model at the top at the head and follow the numbers down. Glue the antennae as the numbers get to them. Close the body at the bottom and glue the detail bellow it after. Proceed to the legs and glue the arms, you can follow the pdo or glue them on a different way. The last thing you'll do is glue the wings, Glue the big ones on the inside and the smaller ones lastly a bit behind the big ones (refer to the pdo).

Download: A4 / Letter

INFERNAPE

392 / INFERNAPE - Pokémon Papercraft
Name: Infernape
Type: Fire/Fighting
Species: Flame Pokémon
Height: 1.2 m (3'11″)
Weight: 55 kg (121.3 lbs.)
Interesting Facts: Infernape is a bipedal, primate-like Pokémon with white and brown fur. It also has some gold markings on it's body, all with circular swirls. On the top of it's head there's a flame, that's never extinguished. There are four digits on both the hands and feet and it has a long tail. Infernape practices a unique kind of martial art, which involve all of its limbs. This style also uses fiery punches and kicks. It is the shortest fully evolved starter Pokémon.

THE PAPER MODEL
Height:  19.0 cm / 7.4 in
Width: 16.1 cm / 6.3 in
Depth: 14.2 cm / 5.5 in
Pages: 4
Pieces: 69
Level: Medium-Hard
Designer: Brandon
Photo: LuIS
NOTES: Start the model by the head, following the numbers and the instructions. Add the details following the numbers and instructions. Be carefull with piece 69, you'll need to cut a hole on it so the tail can pass, also, only add this piece after the legs and the torso are joined and the model is standing. Start the legs by the toes and work up. The model can't stand, further instructions on how to make it stand and some other parts of the model are on the template.

Download: A4 / Letter

TURTWIG

387 / TURTWIG - Pokémon Papercraft
Name: Turtwig
Type: Grass
Species: Tiny Leaf Pokémon
Height: 0.4 m (1′04″)
Weight: 10.2 kg (22.5 lbs.)
Interesting Facts: Turtwig is a turtle like Pokémon, that usually nourishes itself through photosynthesis. The shell on it's back is composed of earth, and should feel moist if very healthy. The seedling on it's head will wilt if the Pokémon becomes thirsty. Turtwig is also the heaviest basic form starter, status both it's evolutions mantain.

THE PAPER MODEL
Height: 18.1 cm / 7.1 in
Width: 17.6 cm / 6.9 in
Depth: 9.2 cm / 3.6 in
Pages: 4
Pieces: 25
Level: Medium-Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the tip of the head and build by numbers, closing at the tail. Glue the leaves after the entire model is built. There are two tricky parts on this model: the area around the mouth and the shell. For the mouth, Fold the horizontal lines and glue pieces 7 and 8 together to the already built part. For the shell, don't glue pieces 11 and 12 to themselves as soon as you get to the body, do it as you proceed with the legs, only connecting them before gluing the last two pieces of the body. It takes some weight to stand, add it before closing.

Download: A4 / Letter

Other pictured models: Chimchar and Piplup

CHIMCHAR (Happy New Year!)

390 / CHIMCHAR - Pokémon Papercraft
Name: Chimchar
Type: Fire
Species: Chimp Pokémon
Height: 0.5 m (1'08")
Weight: 6.2 kg (13.7 lbs.)
Interesting Facts: Chimchar is a bipedal Pokémon resembling a chimpanzee. It's body is mainly a shade of orange, but some parts such as face, belly, hands are light yellow. The flames on it's rear are produced by gas burning in it's stomach. These flames go out when it sleeps. It's very agile, being able to climb the ledges of tall mountains, the place where it lives.

THE PAPER MODEL
Height: 21.2 cm / 8.3 in
Width: 9.3 cm / 3.7 in
Depth: 16.7 cm / 6.6 in
Pages: 4
Pieces: 43
Level: Medium-Hard(no flames)/Hard(flames)
Designer: Brandon
Photo: LuIS
NOTES: Start it at the bottom of the head and close at the top. Same with the body, start at the legs and close at the neck. The fingers can be tricky, so take your time with them. The tail is the hardest part, and it's also optional. So in case you want to build it, be careful, fold the lines and take your time. Also, make sure to glue it before going far with the body. It takes some weight to stand so, before closing the body, add some weight by the unglued tabs of the last piece and place the head til it stands. After you have found the balance and the model stands, close the body and glue the head, but not with a lot of glue.

Download: A4 / Letter

LUXIO

404 / LUXIO - Pokémon Papercraft

Name: Luxio
Type: Electric
Species: Spark Pokémon
Height: 0.9 m (2′11″)
Weight: 30.5 kg (67.2 lbs.)
Interesting Facts: Luxio is a feline, quadruped Pokémon resembling a young lynx or lion. Blue and black fur covers most of its body. Its ears, face, hind paws, and front half of its body are blue, while its hindquarters are black. Additionally, Luxio has a tufty black mane surrounding its face. The mane is longer on the male Luxio, while the fur on the hind paws extends to ankles on the female. The insides of its rounded are yellow, as are its eyes. There are two yellow rings around each front leg and a yellow, four-point star on the tip of its tail. Luxio is able to communicate with others of its kind using electrical pulses from its claws. Luxio lives in small groups, and is able to generate powerful electricity by gathering the group's tails together.

THE PAPER MODEL
Height: 18.0 cm/ 7.1 in
Width: 13.6 cm/ 5.4 in
Depth: 25.3 cm/ 10.0 in
Pages: 5
Pieces: 60
Level: Medium-Hard
Designer: PODragon
Photo: LuIS
NOTES: Start at the face and build the fur around it. The head and the connections between the front legs and the head a can be a little tricky, so take your time there. Build the front legs from the paws up. The pieces of the spikes at the back need to be folded in order to get the right shape. Close the model at the rear paws and glue the tail. Finnish it by gluing the start at the tip of the tail.

Download: A4 / Letter

GLISCOR

472 / GLISCOR - Pokémon Papercraft
Name: Gliscor
Type: Ground/Flying
Species: Fang Scorpion Pokémon
Height: 2.0 m (6'07")
Weight: 42.5 kg (93.7 lbs.)
Interesting Facts: Gliscor is a large, mainly blue-purple vampire bat-like Pokémon. Its legs have two toes and a slightly darker circular coloration on the underside, and its tail has two barbs, giving its tail the resemblance of a vampire's fangs. Its arms are red with thin striations, and are completely detached from its black wings, and each are ended with large pincers. Its ears have discernible, red, chambered ear insides, and its eyes are yellow. It has six visible fangs in its mouth, and its waist, like its arms, is red and striated. Gliscor's body resembles an open mouth, with the pointed protrusions coming from its upper torso resembling fangs, further illustrating its vampiric qualities.

THE PAPER MODEL
Height: 17.0 cm/6.7 in
Width: 15.6 cm/6.1 in
Depth: 21.0 cm/8.3 in
No. of Pages: 7
No. of Pieces: 39
Level: Medium-Hard
Designer: Brandon
Photo: LuIS

NOTES: Start by building the head, which apart from the ears is quite easy. Build each piece separately but don't join them all together now, only at the end. The body is simple, just closing it can be a bit harder than usual. You need to reinforce the inside of the arms to hold the claws. Join the wing to the part between the head and torso. After that, glue the torso and the head. Be careful with the position you glue the torso, use the pdo as reference. You can either glue the claws now or proceed to the tail. If you follow the numbers and glue the tail, use the numbers on the pieces as reference. It takes a good time to glue, so if you can use superglue, it gets easier. To join the last segment, place the model on a flat surface, using the semi last segment as a reference and glue the last one keeping the flat surface. Also, make sure to leave the last two segments open, to insert weight and balance it, jut add weight until it stands after the arms are placed. The claws should be joined to the "wrist" before joining it to the arms. Must fold lines are included on the pdo. Note that the model, even after balanced, can fall with wind.

Download: A4 / Letter

TOGEKISS (Happy Easter!)

468 / TOGEKISS - Pokémon Papercraft
Name: Togekiss
Type: Fairy/Flying
Species: Jubilee Pokémon
Height: 1.5 m (4'11")
Weight: 38.0 kg (83.8 lbs.)
Interesting Facts: Togekiss is a white, avian Pokémon with an ovoid body. While its feet are small and situated closely together, its wings are broad and triangular. Red and blue triangular markings over its underside, and it has a short tail consisting of three feathers. On the back of its head are three spikes: a red tipped on the right, a blue tipped one on the left, and a pure white one in the middle. Togekiss has a relatively flat face and small, black eyes. This Pokémon is rarely seen, only appearing in peaceful areas. When it is seen or visits respectful people, it showers gifts of blessings and kindness.

THE PAPER MODEL
Height: 16.5 cm/6.5 in
Width: 29.9 cm/11.8 in
Depth: 19.7 cm/7.8 in
No. of Pages: 7
No. of Pieces: 75
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start the model at the top of the head, follow the numbers and the istructions and close at the tail. The only part that can offer some trouble on this one is joining the wings with the body, since they are quite big. If you glue the two first chest pieces to it, will make it easier. It stands on it's own, just be careful while placing the feet so they match the pdo and the picture. If it won't stand, add some weight, there should be an opening, since the tail should be only glued after it's standing. To finish it, glue the feathers.

About the wings, up until a point (12), the build with both the wings is the same, after that, if you want the wings as shown on the picture, follow the red numbers, if you want the ones as shown on the pdo, use the black numbers.

Download: A4 / Letter

STARLY

396 / STARLY- Pokémon Papercraft
Name: Starly
Type: Normal/Flying
Species: Starling Pokémon
Height: 0.3 m (1'00")
Weight: 2.0 kg (4.4 lbs.)
Interesting Facts: Although capable of flapping its wings powerfully, Starly is weak and inconspicuous when alone. It forms large flocks to protect itself. However, individuals will begin to bicker if the group becomes too large. This Pokémon’s cry is harsh, and its singing can become annoying. Starly congregates in mountains and fields, where it hunts for bug Pokémon.

THE PAPER MODEL
Height: 16.8 cm/ 6.6 in
Width: 16.9 cm/ 6.7 in
Depth: 30.2 cm/ 11.9 in
No. of Pages: 5
No. of Pieces: 40
Level: Medium
Designer: LuIS
Photo: LuIS
NOTES: The model is built in two main parts: head and body. Start the head at the top feather and work down, it's pretty simple. The body starts at the tail. Remember do glue the legs and wings to it BEFORE closing. The legs are simple, just start at the toes and work by numbers. The wings are built in segments, the instructions on the templates explain how they are supposed to be built. The model might need some weight to stand. Before closing the body, put some weight inside and pop the head until it stands, when it does, close the body and glue the head to it.
Both the textures for Male and Female variants are included, with the Male textures used for non-shiny PDFs and the Female textures used for shiny PDFs.

Download: A4 / Letter

STARAPTOR

398 / STARAPTOR - Pokémon Papercraft
Name: Staraptor
Type: Normal/Flying
Species: Predator Pokémon
Height: 1.2 m (3'11")
Weight: 24.9 kg (54.9 lbs.)
Interesting Facts: Staraptor is a grayish-brown, avian Pokémon similar to a large bird of prey. It has small, red eyes and a thin, yellow beak with a black tip. There is a circular white patch on its forehead, which is smaller on the female. Larger white markings cover the front of its throat and chest, separated by a black ruff encircling the shoulders. A red-tipped, black crest extends over its head, nearly reaching the tip of its beak.

THE PAPER MODEL
Height: 20.6 cm/8.1 in
Width: 18.5 cm/7.3 in
Depth: 30.2 cm/11.9 in
No. of Pages: 6
No. of Pieces: 56
Level: Hard
Designer: LuIS and Brandon
Photo: LuIS
NOTES: The model is built in two main parts: head and body. Start the head at the top feather and work down. The body starts at the tail, which is pretty hard to build. Fold the indicated lines and take your time there. Remember do glue the legs and wings to the body BEFORE closing. Start the legs at the claws and work by numbers, reinforce them from the inside, the model is pretty heavy. The wings are built in segments, the instructions on the templates explain how they are supposed to be built. The model needs weight to stand. I create a pocked inside the body to counterbalance it, reference pictures and instructions are added on the pack and on the template. Add the weight inside and pop the head until it stands, when it does, close the body and glue the head to it. Further instructions added on the template.

Download: A4 / Letter

PHIONE

489 / Phione - Pokémon Papercraft
Name: Phione
Type: Water
Species: Sea Drifter Pokémon
Height: 0.4 m (1'04")
Weight: 3.1 kg (6.8 lbs)
Interesting Facts: Phione is a blue Pokémon with a round head and a tiny body. Phione's head is crowned by a flotation sac with a long, ribbon-like antenna. Its mouth is small, and its eyes are large with blue sclera and gray irises. Above its eyes are two blue, circular markings connected to the eyes by a thin black line. Its long, flipper-like arms have rounded tips. Phione has a red, oval gem on its chest and a single rudimentary foot spike.

THE PAPER MODEL
Height: 14.6 cm/ 5.7 in
Width: 15.4 cm/ 6.1 in
Depth: 14.0 cm/ 5.5 in
No. of Pages: 3
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES:  The model is pretty easy. Start it at the ponytail and work it down. Close the model at the bottom. Further instructions on the template.

Download: A4 / Letter

MEGA LUCARIO

448-M / Mega Lucario - Pokémon Papercraft
Name: M-Lucario
Type: Fighting/Steel
Species: Aura Pokémon
Height: 1.3 m (4'03")
Weight: 57.5 kg (126.8 lbs)
Interesting Facts: As Mega Lucario, its cream fur becomes longer, and its thighs slim down. It develops more spikes on the back of its paws, of which have turned crimson. Its aura-sensing appendages grow longer, and two of them are tipped in crimson. Its shoulders also possess a spike each. Its aura heightens throughout its body, which formed black markings on its blue fur.

THE PAPER MODEL
Height: 30.2 cm/ 11.9 in
Width: 17.3 cm/ 6.8 in
Depth: 17.6 cm/ 6.9 in
No. of Pages: 7
Level: Hard
Designer: Brandon 
Photo: LuIS
NOTES:  This model has two main start points: the ears and the spike that goes inside the chest. The head is closed at the spike at the bottom and the body is closed at the bottom of the toes. There is a time to glue everything to it, in a way that the parts won't stay in the way while building, the order indicated by the numbers provides this. Also, there are a lot of lines to be folded on this one, they are indicated by red lines on the pdo, fold them smoothly. The hardest part is the neck fur, take your time there; fold the lines, follow the instructions and the numbers and it will build pretty well. Plenty more info included on the template, along with colored tabs to guide your build, but the use of the pdo is still indicated.

Download: A4 / Letter

DIALGA

483 / Dialga - Pokémon Papercraft
Name: Dialga
Type: Steel/Dragon
Species: Temporal Pokémon
Height: 5.4 m (17'09")
Weight: 683.0 kg (1505.8 lbs)
Interesting Facts: Dialga is a dark blue sauropod-like Pokémon with some gray metallic portions, such as its chestplate, which has a diamond in the center. It also has various light blue stripes. It has a fin-like structure on its back and a crest on its head, resembling a dinosaur. Dialga also has two horns on top of its head, two fang-like horns around its mouth, three spines on the back of its neck, long claws, and a short tail. The wing-like structure on its back can be used to focus the flow of time, as seen in Explorers of Time, Darkness, and Sky. Pokémon Mystery Dungeon: Explorers of Sky: Dialga appears in the main storyline, but mostly as Primal Dialga.

THE PAPER MODEL
Height: 22.3 cm/ 8.8 in
Width: 17.6 cm/ 6.9 in
Depth: 27.9 cm/ 11.0 in
No. of Pages: 9 (10th is optional 2D instead of 3D on page 1)
Level: Medium-Hard
Designer: Brandon & LuIS
Photo: LuIS
NOTES:  Start the model at the head, close at the tip of the tail. This model has a lot of details to glue on the model, like nails, eyebrows, the chest piece and the so called "fan". It's suggested to glue the details as you go, while you can still apply pressure from the inside. The eyebrows and every diamond shape piece is supposed to be built around the front and closed at the back, where there are no tabs, this is more important for the fan, since the back does not close the piece itself, but instead it's glued on the black details on the back of the fan. After these pieces are glued to the black details, glue the front part to the front of the fan. Further instructions on the template.

Download: A4 / Letter

PALKIA

484 / Palkia - Pokémon Papercraft
Name: Palkia
Type: Water/Dragon
Species: Spatial Pokémon
Height: 4.2 m (13'09")
Weight: 336.0 kg (740.8 lbs)
Interesting Facts: Palkia appeared in the first three Diamond & Pearl series Pokémon movies. It was first shown in The Rise of Darkrai, where it fought with Dialga and Darkrai in a battle that nearly destroyed Alamos Town. It was shown in a flashback in Giratina and the Sky Warrior. Palkia's final movie appearance was in Arceus and the Jewel of Life. It was shown for the first time with both the other members of its trio, and started a battle with them which awoke Arceus.

THE PAPER MODEL
Height: 22.7 cm/ 8.9 in
Width: 24.0 cm/ 9.4 in
Depth: 27.3 cm/ 10.7 in
No. of Pages: 12
Level: Hard
Designer: PODragon
Photo: LuIS
NOTES:  Start the model at the head. The fold lines for this part are indicated in blue lines, it's necessary to fold them in order to give the head and neck a proper shape. You can either glue the wings when indicated by numbers or after the arms are glued, use a drop of glue on the side they meet the body. The arms are built from the hands up, you must glue the arm plates before going any further, they need pressure from the inside. The shoulders are simple and there are references on where to glue the shoulder plates. Join the arm and the shoulder BEFORE closing the arm. The arm can be rotated and glued on another position besides the one on the picture. The legs are built from the feet up. I recommend reinforcing them from the inside, so as the middle of the body. The model is closed at the tip of the tail. The stripes must be glued BEFORE closing, while you can apply pressure from the inside, if you follow the numbers you'll be able to do so.

Download: A4 / Letter

UXIE

480 / Uxie - Pokémon Papercraft
Name: Uxie
Type: Psychic
Species: Knowledge Pokémon
Height: 0.3 m (1'00")
Weight: 0.3 kg (0.7 lbs)
Interesting Facts: Uxie appeared in its physical form in The Needs of the Three!, where it, along with Mesprit, came to Lake Valor after Azelf was captured. However, it was also captured by J and Team Galactic, but before it was captured, it used Future Sight with Mesprit, destroying her ship later on. It was then controlled by the team to help fulfill its goal. In The Battle Finale of Legend!, after breaking from their control with the help of Brock's Croagunk and Ash's Gliscor, it helped in stopping Cyrus's plot to use Dialga and Palkia.

THE PAPER MODEL
Height: 15.5 cm/ 6.1 in
Width: 17.6 cm/ 6.9 in
Depth: 16.6 cm/ 6.5 in
No. of Pages: 7
Level: Medium
Designer: LuIS
Photo: LuIS
NOTES:  Start the model with the head. Build the head but don't close it yet, only do so AFTER the helmet is placed. The body starts at the legs, followed by the tails. The tails are the worst part of the body. Join the side pieces together and glue the bottom and top of the tails at them simultaneously. Reinforcing the connection of the body and the tails is important. Continue the body and join the arms BEFORE gluing the head. Glue the spike to the head and after that glue it to the body. Further instructions on the template.

The textures have been updated after building, so that the face texture more closely resembles official art.

Download: A4 / Letter

MESPRIT

481 / Mesprit - Pokémon Papercraft
Name: Mesprit
Type: Psychic
Species: Emotion Pokémon
Height: 0.3 m (1'00")
Weight: 0.3 kg (0.7 lbs)
Interesting Facts: Mesprit is a small, gray, fairy-like Pokémon. It has two tails that each have a red jewel encrusted in them. These are, presumably, two of the jewels which comprise the Red Chain. Mesprit has a partially magenta face with four long, drooping appendages and another red gem encrusted in its forehead. Mesprit's spirit can leave its body without dying and return to the body at will. Legends say that a person that touches it will have their emotions completely drained away. It was shown in The Needs of the Three! and The Battle Finale of Legend! that it can teleport itself, as well as other Pokémon and humans. Though playful, it is a bit mischievous.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 24.9 cm/ 9.8 in
Depth: 15.2 cm/ 6.0 in
No. of Pages: 6 (7 with larger base)
Level: Medium
Designer: LuIS
Photo: LuIS
NOTES:  Start the model with the head. Build the antennae first and build the head starting around them. The body starts at the legs, followed by the tails. The tails are the worst part of the body. Join the side pieces together and glue the bottom and top of the tails at them simultaneously. Reinforcing the connection of the body and the tails is important. Continue the body and join the arms BEFORE gluing the head. Glue the spike to the head and after that glue it to the body. Further instructions on the template. There are two options for bases, the small one and the big one. The big one is supposed to make it stand taller than the other two lake trio members, as shown on the picture with them together. In order to build it print the last page of the template and use color references to put it together.

Download: A4 / Letter