CAMERUPT

323 / CAMERUPT- Pokémon Papercraft
Name: Camerupt
Type: Fire/Ground 
Species: Eruption Pokémon
Height: 1.9 m (6′03″)
Weight: 220.0 kg (485.0 lbs.)
Interesting Facts: Camerupt is a quadrupedal Pokémon that resembles a Bactrian camel. Its body contains amounts of molten lava of 18,000 °F (10,000 °C), which erupts out of its humps if the Pokémon is angered. As shown in the anime, it can become uncontrollably angry when it is struck in the face. It lives in the craters of volcanoes.

THE PAPER MODEL
Height: 15.0 cm / 5.9 in
Width: 22.7 cm / 8.9 in
Depth: 10.4 cm / 4.1 in
Pages: 7
Pieces: 50
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: The real tricky parts here are the "hair" and the way the feet connect - pay attention there and it should be smooth sailing. Build from the hair and work your way down the face, putting in its teeth once the mouth is fully formed. Work your way to the body starting with the hump, attaching the front legs and the volcanoes on its back before working any farther past the hump. When working with the feet (both front and back) each leg and foot under piece has a matching teal edge - match these up and glue the fur back to back here. The hooves should attach to the flat circular pieces, and the circular pieces match back/back with the fur strands to make a fully formed leg/foot. Keep working back, attaching the tail before closing up the body, and attach and close at the back legs.

Download: A4 / Letter

ZYGARDE

718 / ZYGARDE (50% Forme) - Pokémon Papercraft
Name: Zygarde
Type: Dragon/Ground
Species: Order Pokémon
Height: 5.0 m (16′05″)
Weight: 305.0 kg (672.4 lbs.)
Interesting Facts: Zygarde is a Pokémon whose form depends on the percentage of its Cores and Cells gathered together. Zygarde Core is the brain of Zygarde. It is a small, green Pokémon with a gelatinous body. It has a large, round head with a beak-shaped protrusion on the front, a thin, hook-shaped tail, and a red hexagon suspended in its body. Within its head is a single eye with a black pupil; beside this eye is another white oval that may be a second eye.

THE PAPER MODEL
Height: 21.9 cm / 8.6 in
Width: 21.0 cm / 8.3 in
Depth: 16.9 cm / 6.7 in
Pages: 6
Pieces: 41
Level: Medium
Designer: Brandon
Photo: Photo below by Hunter B via email!

Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Start from the head, work your way back - be careful with the back 'fins' - they're a little thin, and will need to be connected to each other pretty carefully. Once the head and fins are made, it's pretty smooth sailing; just finish the tail, and attach the last 5 pieces to the back of the closed tail. Will likely need weight in the back half of the body/tail to counterbalance the head properly as well. 

Download: A4 / Letter

BALTOY

343 / BALTOY- Pokémon Papercraft
Name: Baltoy
Type: Ground/Psychic
Species: Clay Doll Pokémon
Height: 0.5 m (1′08″)
Weight: 21.5 kg (47.4 lbs.)
Interesting Facts: Baltoy is a small Pokémon that resembles a tan figurine made out of clay or mud. There are arching, red markings over its eyes, which usually appear closed. A red stripe encircles its body, and forms a ring on its belly. It has flat appendages that resemble arms. A spike protrudes from the top of its head and another, smaller spike under its body.

THE PAPER MODEL
Height: 14.6 cm / 5.8 in
Width: 12.6 cm / 5.0 in
Depth: 6.9 cm / 2.7 in
Pages: 3
Pieces: 21
Level: Easy
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Pretty straightforward - just work from the top of the head and work your way down. Connect the arms once the first piece of the body is on, then keep working down and close at the bottom of the "top". Base included to assist, and base textures are separately selected in the PDO as well (just in case you want a shiny base, with a regular body) 

Download: A4 / Letter

CUBONE V3 (Happy Halloween!)

104 / CUBONE- Pokémon Papercraft
Name: Cubone
Type: Ground
Species: Lonely Pokémon
Height: 0.4 m (1′04″)
Weight: 6.5 kg (14.3 lbs.)
Interesting Facts: Text

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 10.5 cm / 10.1 in
Depth: 13.7 cm / 5.4 in
Pages: 5
Pieces: 56
Level: Medium/Easy
Designer: Brandon
Photo: LuIS
NOTES: The head can be a bit tricky if you don't fold the indicated lines. Glue the skull and the body once they are both finnished, I also glued the bone to the body, to keep it at the position I wanted.

Download: A4 / Letter

LARVITAR V2

246 / LARVITAR - Pokémon Papercraft
Name: Larvitar
Type: Rock/Ground
Species: Rock Skin Pokémon
Height: 0.6 m (2' 0")
Weight: 72.0 kg (158.7 lbs)
Interesting Facts: Larvitar is born deep under the ground. To come up to the surface, this Pokémon must eat its way through the soil above. Until it does so, Larvitar cannot see its parent's face. It evolves into Pupitar starting at level 30, whom evolves into Tyranitar starting at level 55.

THE PAPER MODEL
Height: 14 cm / 5.5 in
Width: 11.6 cm / 4.5 in
Depth: 8 cm / 3.1 in
Pages: 2
Pieces: 22
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Not a hard model, start at the horn and build it down. Be careful with the tail, it's the hardest part. Close at the feet. Further instructions added on the template. It might need some weight to stand.

Download: A4 / Letter

GLISCOR

472 / GLISCOR - Pokémon Papercraft
Name: Gliscor
Type: Ground/Flying
Species: Fang Scorpion Pokémon
Height: 2.0 m (6'07")
Weight: 42.5 kg (93.7 lbs.)
Interesting Facts: Gliscor is a large, mainly blue-purple vampire bat-like Pokémon. Its legs have two toes and a slightly darker circular coloration on the underside, and its tail has two barbs, giving its tail the resemblance of a vampire's fangs. Its arms are red with thin striations, and are completely detached from its black wings, and each are ended with large pincers. Its ears have discernible, red, chambered ear insides, and its eyes are yellow. It has six visible fangs in its mouth, and its waist, like its arms, is red and striated. Gliscor's body resembles an open mouth, with the pointed protrusions coming from its upper torso resembling fangs, further illustrating its vampiric qualities.

THE PAPER MODEL
Height: 17.0 cm/6.7 in
Width: 15.6 cm/6.1 in
Depth: 21.0 cm/8.3 in
No. of Pages: 7
No. of Pieces: 39
Level: Medium-Hard
Designer: Brandon
Photo: LuIS

NOTES: Start by building the head, which apart from the ears is quite easy. Build each piece separately but don't join them all together now, only at the end. The body is simple, just closing it can be a bit harder than usual. You need to reinforce the inside of the arms to hold the claws. Join the wing to the part between the head and torso. After that, glue the torso and the head. Be careful with the position you glue the torso, use the pdo as reference. You can either glue the claws now or proceed to the tail. If you follow the numbers and glue the tail, use the numbers on the pieces as reference. It takes a good time to glue, so if you can use superglue, it gets easier. To join the last segment, place the model on a flat surface, using the semi last segment as a reference and glue the last one keeping the flat surface. Also, make sure to leave the last two segments open, to insert weight and balance it, jut add weight until it stands after the arms are placed. The claws should be joined to the "wrist" before joining it to the arms. Must fold lines are included on the pdo. Note that the model, even after balanced, can fall with wind.

Download: A4 / Letter

MAROWAK

105 / MAROWAK - Pokémon Papercraft
Name: Marowak
Type: Ground
Species: Bone Keeper Pokémon
Height: 1.0 m (3'03")
Weight: 45.0 kg (99.2 lbs.)
Interesting Facts: Pokémon Red, Blue, Yellow, FireRed, and LeafGreen: Marowak was killed by agents of Team Rocket, leaving a Cubone as an orphan. With the Silph Scope, its ghost could be seen in Pokémon Tower. It can only be caught by using a cheating device. After fainting in a battle, a message will pop up saying that the Marowak's soul has finally moved on to the afterlife. This message, however, still shows up even if the player actually caught the Marowak with a Gameshark or Action Replay given that the Marowak is not supposed to be catch-able.

THE PAPER MODEL
Height: 18.0 cm/7.1 in
Width: 21.2 cm/ 8.3 in
Depth: 20.7 cm/8.1 in
No. of Pages: 5
No. of Pieces: 34
Level: Medium
Designer: PODragon
Photo: LuIS
NOTES: Build the model from the skull down, closing at the tail. Be careful with the hands. It's not necessary to glue the bone, but it's suggested using some magnets for a perfect placement, use inside the bone and the right hand. It can't stand on it's own, use some coins in the tail to make it stand.

Download: A4 / Letter

CUBONE V2

104 / CUBONE V2 - Pokémon Papercraft
Name: Cubone
Type: Ground
Species: Lonely Pokémon
Height: 0.4 m (1'04")
Weight: 6.5 kg (14.3 lbs.)
Interesting Facts: Cubone is a small, bipedal Pokémon with a golden brown hide that covers most of its body, including both dorsal spikes. Its belly is a very light brown. Two small claws, one on each hand, serve as its thumbs, and two large nails make up its toes. On its head, Cubone wears the skull of its dead mother as a helmet.

THE PAPER MODEL
Height: 17.0 cm/6.7 in
Width: 15.0 cm/ 5.9 in
Depth: 12.7 cm/5.0 in
No. of Pages: 4
No. of Pieces: 33
Level: Medium-Hard
Designer: PODragon
Photo: LuIS
NOTES: Start at the head and work down. Be careful at the skull, folding the lines is really important, specially with piece 12. The arms can be positioned at the builder's will, but be careful so the bone won't touch the head. Close the model at the tail. Further instructions on the template.

Download: A4 / Letter

LANDORUS (INCARNATE)

645 / LANDORUS (Incarnate Forme) - Pokémon Papercraft
Name: Landorus
Type: Ground/Flying
Species: Abundance Pokémon
Height: 1.5 m (4'11")
Weight: 68.0 kg (149.9 lbs.)
Interesting Facts: Landorus made his debut in Stopping the Rage of Legends! Part 1. He appeared in the legend of Milos Island related to Ash and his friends by Lewis, and later appeared at the end of the episode when called to stop the battle of Tornadus and Thundurus. He then appeared in Stopping the Rage of Legends! Part 2, where he managed to subdue the other members of the Forces of Nature. He hasn't however, managed to subdue the Landorus-EX hype.

THE PAPER MODEL
Height: 22.7 cm/8.9 in
Width: 25.8 cm/ 10.2 in
Depth: 24.3 cm/9.6 in
No. of Pages: 9
No. of Pieces: 90
Level: Hard
Designer: Brandon
Photo: Olber
NOTES: Build from top to bottom. Do the Cloudy- Hair first. Then go your way down. Be patient with fingers. Build the Cloud base from bottom to top. Stick the tail when you're done.  No need to print the last page (or first page, as usual). Additional notes on template.

Download: A4 / Letter

KROOKODILE

553 / Krookodile - Pokémon Papercraft
Name: Krookodile
Type: Ground/Dark
Species: Intimidation Pokémon
Height: 1.5 m (4'11")
Weight: 96.3 kg (212.3 lbs)
Interesting Facts: Krookodile has a thick maroon-colored body, black back, and white stomach. It has five triangular spikes on its back: four around the middle of its back, and one large one at the beginning of its tail. Each of the smaller spikes on its back are linked to black, triangular spikes that reach around to its front, slightly overlapping its white stomach. The largest spike sits at the beginning of its long thick tail, which has three, thick, black stripes. The last stripe covers the tip of the tail. Its legs are very short and directly attached to its feet. The feet are wrapped in black and have three white claws facing forward. Krookodile's arms are short and thin with a black stripe around the elbow. Its long, thin fingers are each tipped with a white claw.

THE PAPER MODEL
Height: 18.0 cm/ 7.1 in
Width: 25.4 cm/ 10.0 in
Depth: 21.5 cm/ 8.5 in
No. of Pages: 7
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: Start from the snout, and work your way into the head and down. Attach the arms as soon as possible (as indicated by the numbering). Be careful with the claws, they're the toughest part of the model. Build the body down to the tail. Build the tail back to the tip, and then close at the feet.

Download: A4 / Letter

MAMOSWINE

473 / Mamoswine - Pokémon Papercraft
Name: Mamoswine
Type: Ice/Ground
Species: Twin Tusk Pokémon
Height: 2.5 m (8'02")
Weight: 291.0 kg (641.5 lbs)
Interesting Facts: Mamoswine are incredibly strong. Their sturdy body and feet enable them to cross even the most dense and dry snow. Mamoswine are able to endure harsh cold and hunger for an almost indefinite amount of time, as indicated by a ten-thousand-year-old specimen waking up, much to the amazement of those who discovered it.

THE PAPER MODEL
Height: 15.0 cm/ 5.9 in
Width: 14.5 cm/ 5.7 in
Depth: 24.0 cm/ 9.5 in
No. of Pages: 6
Level: Easy/Medium
Designer: Brandon
Photo: LuIS
NOTES: Start at the front of the head, close at the back legs. Attach the face and tusks using the texture shadows and picture as reference. Refer to part numbers for any additional help. Try to apply pressure from the inside when attaching parts to the body.

Download: A4 / Letter

GABITE

444 / Gabite - Pokémon Papercraft
Name: Gabite
Type: Dragon/Ground
Species: Cave Pokémon
Height: 1.4 m (4'07")
Weight: 56.0 kg (123.5 lbs)
Interesting Facts: Gabite are fierce and predatory dragons, known for their scales that have medicinal properties and can heal most illnesses. Gabite have short, yet deadly sharp teeth, like their pre-evolution, Gible. They have been known to move at extreme speeds.

THE PAPER MODEL
Height: 17.5 cm/ 6.9 in
Width: 16.9 cm/ 6.7 in
Depth: 19.9 cm/ 7.8 in
No. of Pages: 4
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start at the top of the head, close at the foot, following the numbers. Attach the jets on the head whenever possible, as well as claws as you go.

Download: A4 / Letter

WOOPER

194 / Wooper - Pokémon Papercraft
Name: Wooper
Type: Water/Ground
Species: Water Fish Pokémon
Height: 0.4 m (1'04")
Weight: 8.5 kg (18.7 lbs)
Interesting Facts: Wooper is a mostly blue amphibious Pokémon that bears a resemblance to a real-life salamander known as an axolotl. Wooper stands upright on its small, round feet, and has a large, thick tail. Wooper also has purple-colored, branching gills coming out of the sides of its head, and what look like dark blue, curved gill-like markings on its torso. Wooper's head is large compared to its body, its mouth is wide and its eyes are small, round, and black in coloration.

THE PAPER MODEL
Height: 14.5 cm/ 2.8 in
Width: 14.5 cm/ 6.6 in
Depth: 13.2 cm/ 8.3 in
No. of Pages: 3
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start at the top of the head, close at the bottom. Attach the tail when possible, applying pressure from the inside to be sure it attaches. Glue on the feet once the body/feet are completed, being sure the model stands.

Download: A4 / Letter

TIMON

??? / TIMON- Disney Papercraft
Name: Timon
Type: Obnoxious
Species: Meerkat
Height: Short
Weight: Lithe
Interesting Facts: Timon Berkowitz can be rather selfish and thoughtless at times, but in the end, he has a good heart and is loyal to his friends. Unlike most meerkats, who work constantly, Timon is a lazy daydreamer which results in him being cast out of his colony. His status at the bottom of the food chain means he relies on stronger animals to protect him once he's on his own, and as such he usually looks out for himself, but nonetheless he never abandons his friends in times of trouble and is willing to risk himself for them.

THE PAPER MODEL
Height: 20.0 cm/ 7.9 in
Width: 12.4 cm/ 4.9 in
Depth: 14.1 cm/ 5.6 in
No. of Pages: 4
Level: Medium-Hard
Designer: Brandon
Photo: Brandon
NOTES: Start at the head, working down and attaching arms/legs/tail as you go. The unnumbered parts just glue on the outside, so attach those whenever you see fit. Numbers on template.

Download: A4 / Letter

EXCADRILL

530 / EXCADRILL - Pokémon Papercraft
Name: Excadrill
Type: Ground/Steel
Species: Subterrene Pokémon
Height: 0.7 m (2' 04")
Weight: 40.4 kg (89.1 lbs)
Interesting Facts: Excadrill is a dark-colored, bipedal mole-like Pokémon. It has a tapered, pink-tipped snout and a white face. It has large, gray-colored, jagged features on its head and forelimbs, which may be described as looking like axes. Excadrill sports red diamond patterning on the side of its head, forelimbs, and legs, and larger, stripe-like patterns of red on its underside. It has folds on the back of its neck, resembling a hood.

THE PAPER MODEL
Height: 19.0 cm/ 7.5 in
Width: 16.9 cm/ 6.7 in
Depth: 25.4 cm/ 10.0 in
No. of Pages: 6
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Build the body from top down, closing at the feet. Attach the arms as you go, and be particularly careful with all the smaller parts (helmet, fingers/ arms). Numbers included on template too to help guide you along.

Download: A4 / Letter

PUPITAR v2

247 / PUPITAR V2- Pokémon Papercraft
Name: Pupitar
Type: Rock/Ground
Species: Hard Shell Pokémon
Height: 1.2 m (3' 11")
Weight: 72.0 kg (158.7 lbs)
Interesting Facts: Pupitar are somewhat large Pokémon that are encased inside a thick shell made of grayish-blue rock. They have several spikes and holes for eyes and what appears to be eyebrows, but are actually triangular openings. Since its arms and legs are developing inside the shell, Pupitar are capable of venting gas to propel themselves around.

THE PAPER MODEL
Height: 16.0 cm/ 6.3 in
Width: 11.5 cm/ 4.5 in
Depth: 13.8 cm/ 5.4 in
No. of Pages: 3
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build the mask and body separately, and attach the body segments before attaching the mask. Each segment of the body closes in itself, to strengthen the body and make it easier to connect.

Download: A4 / Letter

GARCHOMP

445 / GARCHOMP - Pokémon Papercraft

Name: Garchomp
Type: Dragon/Ground
Species: Mach Pokémon
Height: 1.9 m (6′03″)
Weight: 95.0 kg (209.4 lbs.)
Interesting Facts: Garchomp are dark blue, with a red underbelly that covers from the middle of its abdomen, to its jaws, and then to the undersides of its arms. Underneath the red is a gold diamond shape as well a gold cross on its snout; which gives Garchomp a close resemblance to Sharpedo, with close to the same body color as it. Garchomp have appendages that resemble jets, planes and hammerhead sharks; its four fins, one on each arm, one dorsal fin and another on its tail that resembles a shark tailfin; horns that resemble jet/plane engines rest on its head, resembling a hammerhead. It has spikes on its hind limbs and arms as well as sharper claws than its previous evolution. Its eyes have black scleras and gold-colored irises. Its pupils have shrunk.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 20.8 cm/ 8.2 in
Depth: 25.8 cm/ 10.2 in
Pages: 5
Pieces: 94
Level: Hard
Designer: Brandon
Photo: Carnilmo
NOTES: Build from head down, attaching teeth, arms, and fins as possible. Further notes included. It's a tough model, so if you're just starting out try something else as a warm up.

Download: A4 / Letter

GIBLE CHIBI

443 / GIBLE - Chibi - Pokémon Papercraft

Name: Gible
Type: Dragon/Ground
Species: Land Shark Pokémon
Height: 0.7 m (2′04″)
Weight: 20.5 kg (42.5 lbs.)
Interesting Facts: Gible is a shark based Pokémon that keep some characteristics of sharks, like the dorsal fin, that indicates also it’s gender, the male have a cut on it, and the strong jaws, also, when using them to bite, it hurts itself. It’s blue and has an orange belly. It has two “jets” on its head that are strong enough to carry a person. They are excellent diggers and use this skill to make homes. It was shown in the anime that they like to lick the people they like.

THE PAPER MODEL
Height: 9.0 cm/ 3.5 in
Width: 11.2 cm/ 4.4 in
Depth: 8.7 cm/ 3.4 in
Pages: 1
Pieces: 18 (Female)/19 (Male)
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start by the fin. If you want the male build the set with the (1) following the leters, if you want the female build the set with the (2). Keep building following the numbers attaching the fins as soon as possible. Glue the teeth to the tabs of the mouth, this way the tabs of the teeth won’t show. Close at the tail.

Download: A4 / Letter

GOLEM

076 / GOLEM - Pokémon Papercraft

Name: Golem
Type: Rock/Ground
Species: Megaton Pokémon
Height: 1.4 m (4′07″)
Weight: 300.0 kg (661.4 lbs.)
Interesting Facts: Golem's brownish-colored body resembles a boulder as it is covered by a layer of plated rocks. Golem has a head protruding out of the center of the shell, with short arms that have three claws and four-clawed legs. Unlike its previous forms, it has red eyes and its face appears much less 'rocky' and craggy in appearance, instead being somewhat turtle-like with two visible teeth in the lower jaw. As shown in the Pocket Monsters Carddass Trading Cards Golem's shell is hollow.

THE PAPER MODEL
Height: 17.2 cm/ 6.8 in
Width: 18.2 cm/ 7.2 in
Depth: 18.0 cm/ 7.1 in
Pages: 8
Pieces: 54
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: Follow the numbers, being careful with the appendages (arms, head, legs). Notes included.

Download: A4 / Letter

RHYPERIOR

464 / RHYPERIOR - Pokémon Papercraft

Name: Rhyperior
Type: Ground/Rock
Species: Drill Pokémon
Height: 2.4 m (7′10″)
Weight: 282.8 kg (623.5 lbs.)
Interesting Facts: Rhyperior can insert rocks and boulders into its arms through holes in its hands and then fire them like bullets. However, it will occasionally insert and fire Geodude by accident. They are monstrously powerful and are massively difficult to take down without a Water or Grass move.

THE PAPER MODEL
Height: 19.0 cm/ 7.5 in
Width: 26.4 cm/ 10.4 in
Depth: 24.3 cm/ 9.6 in
Pages: 10
Pieces: 74
Level: Hard
Designer: Brandon
Photo: Skeleman
NOTES: Follow the numbers, being careful with the rocky parts (belt and head) and when connecting the arms. Build the belt and attach it to the body before moving too far on. Close at the bottom of the feet, and attach the arms and teeth afterward. Try to reference the pdo if possible.

Download: A4 / Letter