RATICATE (Chinese New Year 2020)

020 / RATICATE - Pokémon Papercraft
Name: Raticate
Type: Normal
Species: Mouse Pokémon
Height: 0.7 m (2′04″)
Weight: 18.5 kg (40.8 lbs.)
Interesting Facts: Raticate are much larger than Rattata, bipedal instead of quadrupedal, and are mostly tawny in color with a lighter-colored underside. Like Rattata, Raticate’s most prominent feature is its very large incisor teeth that grow quickly. Three rows of whiskers extend from its muzzle, which it uses to maintain balance. They also possess webbed feet, which can enable them to swim. Raticate has a much more rat-like tail than Rattata, being long, scaled, and bare, and its ears are more ragged in shape.

THE PAPER MODEL
Height: 14.8 cm / 5.8 in
Width: 14.1 cm / 5.6 in
Depth: 19.1 cm / 7.5 in
Pages: 5
Pieces: 45
Level: Medium
Designer: Brandon
Photo: Olber

NOTES: Build from the top down (In order by number), taking care with the fur and ears, and attaching the whiskers and hands along the way. Attach the tail before closing. Close at the bottom, and then glue on the feet. Also, there is no weight required.

Download: A4 / Letter

KABUTOPS

142 / KABUTOPS - Pokémon Papercraft
Name: Kabuto
Type: Rock/Water
Species: Shellfish Pokémon
Height: 1.3 m (4′03″)
Weight: 40.5 kg (89.3 lbs.)
Interesting Facts: Kabuto's four insect-like legs have vanished and two long feet with two toes each stand in their place. Two long sharp claws (or sickles) extend from Kabutops's exoskeleton and several plates close the opening that used to be there. There are six hard spikes going down from the back of its neck, three on each side that lead down towards the beginning of its tail. Its head is covered in a rock-hard, semicircle-shaped armor. A tail protrudes from its back, bearing the same color as about three-fourths of its body. Its gills have also begun to change to make it land compatible.

THE PAPER MODEL
Height: 16.3 cm/ 6.4 in
Width: 17.5 cm/ 6.9 in
Depth: 23.2 cm/ 9.1 in
Pages: 4
Pieces: 45
Level: Medium/Hard
Designer: Brandon
Photo: Brandon
NOTES: Build from the head down. Build the arms from the tip of the scythe to the shoulder, attaching as soon as possible. Attach the back spines once possible. Close at the bottom of the foot, and plop the claws on when done. If the left scythe is placed correctly it will stand, but will still be a little unstable. A little bit of weight in the tail is suggested, to correct this.

Download: A4 / Letter

KABUTO

140 / KABUTO - Pokémon Papercraft
Name: Kabuto
Type: Rock/Water
Species: Shellfish Pokémon
Height: .5 m (1′08″)
Weight: 11.5 kg (25.4 lbs.)
Interesting Facts: Kabuto is a fossil Pokémon no longer found in the wild, and must be resurrected from a Dome Fossil. Kabuto and its evolved form, Kabutops, favor using physical moves; whereas the Omanyte-line is more adept at special attacks. Kabuto also happens to be slightly faster than Omanyte while having weaker physical defense. It supposedly also has oils in its shells which can grant immortality; in the Orange Islands, many of their fossils revived in the light of a red moon.

THE PAPER MODEL
Height: 6.6 cm/ 2.6 in
Width: 5.1 cm/ 2.0 in
Depth: 6.7 cm/ 2.6 in
Pages: 1
Pieces: 15
Level: Easy
Designer: Brandon
Photo: Brandon
NOTES: Build from the top of the page down. Make a small slit for each claw, gluing the tabs on the inside before closing with the black piece.

Download: A4 / Letter

WIGGLYTUFF

040 / WIGGLYTUFF - Pokémon Papercraft
Name: Wigglytuff
Type: Fairy
Species: Balloon Pokémon
Height: 1.0 m (3'03")
Weight: 12.0 kg (26.5 lbs.)
Interesting Facts: Wigglytuff are capable of inflating themselves to big sizes in order to scare off enemies. Wigglytuff can also sing soothing lullabies to make anyone fall asleep, but its reputation for doing so isn't as famous as its previous evolution. Despite its cute demeanor, Wigglytuff is sometimes known for being very aggressive and slapping anyone that gets on its nerves. It evolves from Jugglypuff when exposed to a Moon Stone. It is Igglybuff's final form.

THE PAPER MODEL
Height: 20.5 cm/8.1 in
Width: 18.8 cm/ 7.4 in
Depth: 9.7 cm/3.8 in
Pages: 4
Pieces: 48
Level: Medium
Designer: PMF
Photo: Skelekitty
NOTES: Build by numbers. Make the arms and then put them aside, until you need to attach them to the body. You will need to place a counterweight in the left foot before closing the model (some coins work fine.)

Download: A4 / Letter

Happy Birthday Skelekitty!!

Awww... no more cakes :(

but hey! Papertoys! 
( Spheal - Gengar - Woobat - Hoothoot - Washing machine Rotom )

CLEFABLE

035/ CLEFABLE - Pokémon Papercraft
Name: Clefable
Type: Fairy
Species: Fairy Pokémon
Height: 1.3 m (4'03")
Weight: 40.0 kg (88.2lbs.)
Interesting Facts: Clefable are extremely shy and rare in the wild, and can be found only in mountainous areas that offer clear views of the moon at night. It has such an accute sense of hearing, that it can hear a pin drop from half a mile away. With its bouncy step, Clefable is able to walk on water, however, despite it possessing the required anatomy, Clefable is not part flying-type, nor can it learn any moves that involves its wings. It evolves from Clefairy when exposed to a Moon Stone. It is the final form of Cleffa.

THE PAPER MODEL
Height: 20.0 cm / 7.8 in
Width: 20.7 cm / 8.1 in
Depth: 12.3 cm / 4.8 in
Pages: 5
Pieces: 45
Level: Medium
Designer: PMF
Photo: Skelekitty
NOTES: This model would be a very easy model if it were not for that darn curl on its forhead! Like with the Jugglypuff and Cleffa, the curly part is the hardest, so we strongly advise that you use the PDO. The fingers can also be tricky, but tabs-to-edges are colour coded, so please try to follow these markers, too.

Attach toes to feet (leaving the sole of the foot open) before attaching these part to the ankles, then close model at the sole of the right foot. You will need to put a counterweight into the right foot before closing - couple of Australian 5c pennies worked for me, and yes I did try it with just one 5c but it wasn't enough.

Also, I have included in the download packs a blank template (texture free) PDF which basically has the crucial and necessary fold lines indicated on it for the lineless model. Please indicate if this is helpful to those of you building the lineless versions.

Download: A4 / Letter

SWEET KISS

SWEET KISS - Pokémon Papercraft
Name: Sweet Kiss
Type: Normal-Type Move
Interesting Facts: Sweet Kiss causes the target to become confused. Its animation correlates to its Japanese name in which an angel floats down and kisses the opponent.

THE PAPER MODEL
Height: 10.0 cm/ 3.9 in
Width: 6.7 cm/ 2.6 in
Depth: 7.6 cm/ 3.0 in
Pages: 1
Pieces: 21
Level: Easy
Designer: Brandon
Photo: Skeleman
NOTES: Build from the head down, closing at the bottom of the feet. Use a little glue on the back to attach the wings.

Download: A4 / Letter

NIDORAN M (Happy Valentine's Day!)

032 / NIDORAN♂ - Pokémon Papercraft
Name: Nidoran♂
Type: Poison
Species: Poison Pin Pokémon
Height: 0.5 m (1′08″)
Weight: 9.0 kg (19.8 lbs.)
Interesting Facts: Nidoran♂ are fairly docile Pokémon, although they tend to be more alert and nervous than their female counterparts, constantly listening for the sounds of approaching enemies with their large ears. Their potent venom is used primarily as a defense, and most likely evolved to counteract their small body size.

THE PAPER MODEL
Height: 14.1 cm/ 5.6 in
Width: 15.2 cm/ 6.0 in
Depth: 13.1 cm/ 5.2 in
Pages: 5
Pieces: 46
Level: Medium-Hard
Designer: Brandon
Photo: Olber
NOTES: Begin from mouth, build the face, attach the ears, and complete the head. Build the back and spikes, attach the front legs, belly. Close the model at one of the rear legs.

Download: A4 / Letter

NIDORAN F (Happy Valentine's Day!)

029 / Nidoran♀ - Pokémon Papercraft
Name: Nidoran♀
Type: Poison
Species: Poison Pin Pokémon
Height: 0.4 m (1′04″)
Weight: 7.0 kg (15.4 lbs.)
Interesting Facts: Nidoran♀ is the female of the species, and is noted to be the first Pokémon to denote gender differences. In the later generations, however, Pokémon with genders are marked with a ♀ or ♂ symbol, rather than being actual different Pokémon. Nidoran♀ have a smaller forehead horn than their male counterparts, Nidoran♂. They also have lesser spines, and are of a different color.

THE PAPER MODEL
Height: 14.4 cm/ 5.7 in
Width: 14.1 cm/ 5.6 in
Depth: 11.7 cm/ 4.6 in
Pages: 4
Pieces: 39
Level: Medium-Hard
Designer: Brandon
Photo: Olber
NOTES: Begin from mouth, build the face, attach the ears, and complete the head. Build the arms, chest, back. Close the model at the 'butt' piece. a little weight would be helpful to give the model stability. Finally glue the feet.


Download: A4 / Letter

QUAGSIRE

195 / QUAGSIRE - Pokémon Papercraft
Name: Quagsire
Type:
Species: Water Fish Pokémon
Height: 1.4 m (4'07")
Weight: 75.0 kg (165.3 lbs.)
Interesting Facts: Quagsire are quite care-free and relaxed, and so typically swim without paying much attention to their surroundings, in fact, it appear to be oblivious to pain, allowing them to frequently bump their heads on boats and other water-borne objects while swimming without any adverse effects. Quagsire's Ground element allows it to harmlessly shrug off Electric attacks. It also has the ability to go long periods of time without food, affording it the luxury of waiting for its prey to come to it. The "fin" running down a female Quagsire's back is smaller than that of a male.It evolves from Wooper starting at level 20.

THE PAPER MODEL
Height: 10.0 cm/3.9 in
Width: 8.3 cm/ 3.3 in
Depth: 17.4 cm/6.9 in
Pages: 4
Pieces: 43
Level: Easy-Medium
Designer: POdragon
Photo: Skelekitty
NOTES: Build by numbers. If you are attempting to do the lineless model, be sure to score/emboss the buttock crease, to ensure you get the right shaped rear end. Tweezers will probably be useful to you in this part at at the tail-join. You may wish to place a counterweight on the base of the back pannel - where the fin is completely flat - but this is not necessary.

Download: A4 / Letter

DONPHAN

232 / DONPHAN - Pokémon Papercraft
Name: Donphan
Type: Ground
Species: Armor Pokémon
Height: 1.1 m (3′07″)
Weight: 120.0 kg (264.6 lbs.)
Interesting Facts: Donphan are light-gray elephant-like Pokémon. There is a thick, black band of hide that run down the length of Donphan's back and extends to the trunk, resembling a car tire. Donphan have four short legs with three claws with each leg having a black band around them. They also sport a pair of white tusks, and elongated ears held stiffly to Donphan's sides.

THE PAPER MODEL
Height: 12.4 cm/ 4.9 in
Width: 23.4 cm/ 9.2 in
Depth: 23.3 cm/ 9.2 in
Pages: 6
Pieces: 40
Level: Medium-Hard
Designer: Brandon
Photo: Skeleman
NOTES: Build from nose to tail with the top shell, then build the body down from there. Close at the bottom of the legs/feet.

Download: A4 / Letter

WYNAUT

360 / WYNAUT - Pokémon Papercraft
Name: Wynaut
Type: Psychic
Species: Bright Pokémon
Height: 0.6 m (2′00″)
Weight: 14.0 kg (30.9 lbs.)
Interesting Facts: Wynaut is somewhat skilled at countering enemy attacks, although doesn't do so as well as Wobbuffet can. Like Wobbuffet, Wynaut are incapable of harming foes outside of counterattacks. Wynaut have high endurance, which they hone by squeezing up against one another on moonlit nights.

THE PAPER MODEL
Height: 13.8 cm / 5.5 in
Width: 20.0 cm / 7.8 in
Depth: 12.7cm / 4.9 in
Pages: 4
Pieces: 40
Level: Easy / Medium
Designer: PMF
Photo: Toshi
NOTES: It is an easy – medium model, just follow the pdo to have a completed model. Because his head and body are seperated, you need good glue aka super glue to attach them to each other.
You can begin building it from the neck and finish it at the top of the head. The same goes with his body, close at the bottom of it too.

Download: A4 / Letter

WOBBUFFET

202 / WOBBUFFET - Pokémon Papercraft
Name: Wobbuffet
Type: Psychic
Species: Patient Pokémon
Height: 1.3 m (4′03″)
Weight: 28.5 kg (62.8 lbs.)
Interesting Facts: Wobbuffet is a tall, cyan-colored blob-like creature with a black tail that has two eye-spots on it. Wobbuffet has flipper-like arms and a crooked expression on its face, as opposed to the perpetual smile that its un-evolved form has. Its face, as with Wynaut, is an east Asian emote. It also walks on four legs at its base.

THE PAPER MODEL
Height: 17.0 cm / 6.7 in
Width: 12.1 cm / 4.8 in
Depth: 10.1 cm / 4.0 in
Pages: 4
Pieces:42
Level: Medium
Designer: Brandon
Photo: Olber
NOTES: This model is fairly easy to build, but the bulb on the head and feet can get tricky so refer to the pdo file if you want to do it well. Begin from the mouth, complete the head, attach arms on your way down. Close the model at the labeled piece.
Female texture is also included, but can only be printed from the .pdo.


Download: A4 / Letter