FERALIGATR

160 / FERALIGATR - Pokémon Papercraft
Name: Feraligatr
Type: Water
Species: Big Jaw Pokémon
Height: 2.3 m (7′07″)
Weight: 88.8 kg (195.8 lbs.)
Interesting Facts: Feraligatr opens its powerful jaws to intimidate its foes and viciously shakes its head once it clamps down on foes or prey. Because it has difficulty supporting its weight out of the water, it has been known to move on all fours. However, when hunting or fighting, it is agile and fast, due to its powerful hind legs. Feraligatr can rarely be found living near the water's edge.

THE PAPER MODEL
Height: 17.7 cm / 7.0 in
Width: 21.9 cm / 8.6 in
Depth: 22.6 cm / 8.9 in
Pages: 10
Pieces: 81
Level: Medium-Hard
Designer: PODragon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Slightly tough, but if you can get past all the "rough skin" patches that are a bit embossed, it can go by quick. Build following the numbers, starting with the mouth and work your way down. Build the arms from the fingers to the shoulders, attach them when you can, and keep working down the body. Attach the tail before starting to work towards the bottom of the feet to close. Use the pedal base to help it stand (and give it some style 😎) Optional microphone included as well. 

Download: A4 / Letter

HERACROSS CHIBI

214 / HERACROSS CHIBI - Pokémon Papercraft
Name: Heracross
Type: Bug/Fighting
Species: Single Horn Pokémon
Height: 1.5 m (4′11″)
Weight: 54.0 kg (119.0 lbs.)
Interesting Facts: Heracross is a bipedal, beetle-like Pokémon covered in a blue exoskeleton. There is a long, pronged horn on its forehead. The horn ends in a cross on the male and a heart-shape in the female. On either side of the horn is a short antenna with a spherical tip. Heracross has oval, yellow eyes. Its forearms have a pair of spikes near the wrists, while its thighs have a single spike each. It has two claws on its hands, and a single long claw on each foot. There is a single pair of wings covered by its carapace, which can be seen during its release from a Poké Ball in the 3D games.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 16.2 cm / 6.4 in
Depth: 11.1 cm / 4.4 in
Pages: 2+1 for Base
Pieces: 22
Level: Easy
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Follow the numbers on the template, starting from the head and going downward. Horns included for both male and female, along with a base to help it stand. 

Download: A4 / Letter

JUMPLUFF

189 / JUMPLUFF - Pokémon Papercraft
Name: Jumpluff
Type: Grass/Flying
Species: Cottonweed Pokémon
Height: 0.8 m (2′07″)
Weight: 6.6 kg (3.0 lbs.)
Interesting Facts: Jumpluff drifts on seasonal winds and can use its spores to masterfully maneuver itself around the globe. It will spread spores as it floats around to create offspring. It descends if it encounters cold air currents while it is floating. Though it spends a good amount of time in the air, it is commonly sighted above open temperate grasslands.

THE PAPER MODEL
Height: 17.0 cm / 6.7 in
Width: 8.9 cm / 3.5 in
Depth: 19.2 cm / 7.6 in
Pages: 4
Pieces: 27
Level: Easy
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: This one is actually pretty easy - the main thing you have to worry about is making the puffs stick. To help in this, the body builds from the top down, but the puffs build from the base outward - with this, you can leave the puffs open while pressing them onto the stem and body, and be sure they're stable before closing. Using wire in the 'stems' (17, 21, 25) shouldn't be *needed*, but could certainly be helpful to help support everything. 

Close the body at the bottom, and place the feet as desired. They're positioned at the bottom in the pdo, but you could always place them in Jumpluff's iconic hopping/floating position to give it a loftier look. 

Download: A4 / Letter

TEDDIURSA v2 (Sitting)

216 / Teddiursa v2 - Pokémon Papercraft
Name: Teddiursa
Type: Normal
Species: Little Bear Pokémon
Height: 0.6 m (2'00″)
Weight: 8.8 kg (19.4 lbs.)
Interesting Facts: Teddiursa uses Beedrill pollen and fruit to create its own honey. The marking on its face glows when it finds honey already made. Honey is often absorbed into Teddiursa's forepaws, and it is often seen licking them. It will hide food stores throughout its territory before food becomes scarce in winter. Teddiursa lives in mountainous forests.

THE PAPER MODEL
Height: 18.1 cm / 7.1 in
Width: 16.1 cm / 6.3 in
Depth: 12.4 cm / 4.9 in
Pages: 6
Pieces: 60
Level: Easy-Medium
Designer: Brandon
Photo: FlamingCheese via Email! Shiny Teddy from Mark B via email as well!

Feel free to submit your own at our email and we'll display the best/most creative! 
NOTES: Start the model at the top of the head with the ears, following it down. Before sealing the bottom, be sure to attach the legs to the front evenly so that they help stabilize the model. 

We might have returned with a re-vamped model, but more (unique) ones soon to come! 

Download: A4 / Letter

ELEKID (HAPPY EASTER!)

239 / ELEKID - Pokémon Papercraft
Name: Elekid
Type: Electric
Species: Electric Pokémon
Height: 0.6 m (2′00″)
Weight: 23.5 kg (51.8 lbs.)
Interesting Facts: Elekid tends to play out in the middle of thunderstorms. By rotating its arms, it generates electricity. However, it tires easily and can only charge a small amount. A weak electrical charge travels between its horns as well. It lives in the grasslands.

THE PAPER MODEL
Height: 15.9 cm / 6.3 in
Width: 8.7 cm / 3.4 in
Depth: 19.8 cm / 7.8 in
Pages: 3
Pieces: 34
Level: Easy-Medium
Designer: Brandon
Photo: Luis
NOTES: Follow the numbers on the template. Build from head down, closing with the bottom of the body at the base of the legs. The "plugs" on the head are best cut out with an exacto knife in order to get the circular pieces out easier, but can also be cut out by poking a hole in it with scissors and cut it out that way too. Attach the feet at the bottom of the body after closing the body. 
Download: A4 / Letter

TOTODILE V2

158 / TOTODILE - Pokémon Papercraft
Name: TotodileType: WaterSpecies: Big Jaw PokémonHeight: 0.6 m (2'00″)Weight: 9.5 kg (20.9 lbs.)Interesting Facts: Totodile are very powerful especially underwater. They have very powerful jaws and have a bad habit of biting anything they see. So better not turn your back on a Totodile. They, however, are always ready for a laugh and are very playful. Evolves into Croconaw then to a Feraligatr.


THE PAPER MODEL
Height: 14.9 cm / 5.8 in
Width: 11.6 cm / 4.5 in
Depth: 11.6 cm / 4.5 in
Pages: 3
Pieces: 42 + Optional base
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start at the top of the mouth, building the nose first and the head around it. Be careful with the fingers, they are the hardest part, I really suggest tweezers to build them. Glue the details before closing at the tip of the tail. You can either build the base of use weight inside to make it stand, keep in mind that it took me some weight for it to stand, just add it a little bit at a time and place on a flat surface to see if it stands. Further instructions and numbers at the pdo.

Download: A4 / Letter

MAGCARGO

219 / MAGCARGO - Pokémon Papercraft
Name: Magcargo
Type: Fire/Rock
Species: Lava Pokémon
Height: 0.8 m (2′07″)
Weight: 55.0 kg (121.3 lbs.)
Interesting Facts: Magcargo is a limbless, snail-like Pokémon consisting almost entirely of bright red magma. Its oval eyes are large and yellow with small pupils, and extend upward from its head. It has a bulbous snout and a wide mouth, with two drops of magma dangling from each side of its upper jaw. Magcargo's back is protected by a gray, spherical shell composed of hardened, but brittle magma, forming irregular lumps and plates. A streak of fire leaks from the side of its shell. Magcargo's lower body is amorphous and covered in bubbles of magma.

THE PAPER MODEL
Height: 15.1 cm / 6.0 in
Width: 19.0 cm / 7.5 in
Depth: 11.9 cm / 4.7 in
Pages: 5
Pieces: 38
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start with the top of the head, working down and back. Be a bit careful with the shell and the attachment point between the shell and body. Shell and body are separate pieces and need to be closed separately, on the flat piece. Pieces are numbered as well, per usual.

Download: A4 / Letter

AMPHAROS V2

181 / AMPHAROS - Pokémon Papercraft
Name: AmpharosType: ElectricSpecies: Light PokémonHeight: 1.4 m (4' 7")Weight: 61.5 kg (135.6 lbs)Interesting Facts: Ampharos gives off so much light that it can be seen even from space. People in the old days used the light of this Pokémon to send signals back and forth with others far away. It evolves from Flaaffy starting at level 30. It is the final form of Mareep.


THE PAPER MODEL
Height: 18.9 cm / 7.4 in
Width: 13.2 cm / 5.2 in
Depth: 11.1 cm / 4.4 in
Pages: 3
Pieces: 35
Level: Medium-Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the head and close at the feet. Glue the head details as you go. Further instructions included on the template.

Download: A4 / Letter

QWILFISH

211 / QWILFISH - Pokémon Papercraft
Name: Qwilfish
Type: Water/Poison
Species: Balloon Pokémon
Height: 0.5 m (1′08″)
Weight: 3.9 kg (8.6 lbs.)
Interesting Facts: Qwilfish is a sea dwelling Pokemon with a spherical body and a flat tail. The upper half of the body is dark green and the lower is light yellow. The tail also contains a mix of these two colors, with green teal dots on the center. The eyes are even with the body and always seen slanted angrily. Below the eyes are pink lips. All around the body it has sharp, conical spikes, which evolved from scales overtime. In order to attack it drinks 2.6 gallons of water to inflate its body, using the water presure to shoot poisonous quills at its foe. Due to the round body, it is not a great swimmer, and when filled with water it gets even worse.

THE PAPER MODEL
Height: 11.2 cm / 4.4 in
Width: 15.6 cm / 6.1 in
Depth: 21.2 cm / 8.3 in
Pages: 3
Pieces: 28
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start at the top of the head and build it gluing the tail, spikes and mouth as you go and before closing, Make sure to have the lower spikes in a same plane, so they balance the model. You can either close with a the flat or the round piece. Needs a coin inside to stand.

Download: A4 / Letter

TOGEPI V2 - HAPPY EASTER!

175 / TOGEPI - Pokémon Papercraft
Name: Togepi
Type: Fairy
Species: Spike Ball Pokémon
Height: 0.30 m (1'00")
Weight: 1.50 kg (3.3 lbs.)
Interesting Facts: Togepi is a small, light yellow Pokemon with a round body still encased in its eggshell, which has blue and red shapes all over. It has stubby hands and feet with two toes. It has black eyes and five spikes on the head. It is able to release Poison from the spikes on the head. It's shown in the anime that it can retract inside its shell, doing so usually to sleep. It is able to siphon positive energy of others and release to these in need. It has a very joyful nature, which is said to share with the ones that take care of it. Because of its disposition, it is usually seen as a sign of good luck, especially if someone is capable of getting a sleeping Togepi to stand. It is rare in the wild, but can be found living within forests.

THE PAPER MODEL
Height: 14.5 cm / 5.7 in
Width: 15.4 cm / 6.1 in
Depth: 11.6 cm / 4.6 in
Pages: 5
Pieces: 36
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start at the top of the head and close at the bottom. Build the first segment of the shell with the cracks and the top and glue the head to it, applying presure from the inside. Close the shell at the bottom, but don't forget to glue the arms before closing. Refer to the pdo when gluing the feet to the shell.

Download: A4 / Letter

AIPOM

190 / AIPOM - Pokémon Papercraft
Name: Aipom
Type: Normal
Species: Long Tail Pokémon
Height: 0.8 m (2′07″)
Weight: 11.5 kg (25.4 lbs.)
Interesting Facts: Aipom is an monkey-like Pokemon with a hand with 3 fingers at the tip of it's tail. The fur is mainly purple, but some beige parts can be noted, such as the face and belly. The tail is strong enough to anchor it to branches and suspend the rest of the body, but at the same time it's delicated enough to eat fruits and manipulate objects. Aipom lives high in the treetops, using its tail for balance as it swings from branch to branch. 

THE PAPER MODEL
Height: 18.1 cm / 7.1 in
Width: 12.8 cm / 5 in
Depth: 16.2 cm / 6.3 in
Pages: 4
Pieces: 39
Level: Medium/Easy
Designer: Brandon
Photo: LuIS
NOTES: Start the model at the fur on the top of the head and close the head at the bottom. It's important to note that all the lines piece 1 should be at least smootly folded, in order to get the right shape. Start the body at the legs and add details, such as tail and arms as you go. The tabs on the legs are a bit weird, but they're like that to give them more strenght. Close the body at the top and glue the head to it after. The feet are the last part you'll glue, make sure they are leveled with the tail, so the model will stand without weight.

Download: A4 / Letter

LARVITAR V2

246 / LARVITAR - Pokémon Papercraft
Name: Larvitar
Type: Rock/Ground
Species: Rock Skin Pokémon
Height: 0.6 m (2' 0")
Weight: 72.0 kg (158.7 lbs)
Interesting Facts: Larvitar is born deep under the ground. To come up to the surface, this Pokémon must eat its way through the soil above. Until it does so, Larvitar cannot see its parent's face. It evolves into Pupitar starting at level 30, whom evolves into Tyranitar starting at level 55.

THE PAPER MODEL
Height: 14 cm / 5.5 in
Width: 11.6 cm / 4.5 in
Depth: 8 cm / 3.1 in
Pages: 2
Pieces: 22
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Not a hard model, start at the horn and build it down. Be careful with the tail, it's the hardest part. Close at the feet. Further instructions added on the template. It might need some weight to stand.

Download: A4 / Letter

AZUMARILL (MERRY CHRISTMAS!)

184 / AZUMARILL - Pokémon Papercraft
Name: Azumarill
Type: Water/Fairy
Species:  Aqua Rabbit Pokémon
Height: 0.8 m (2'07")
Weight: 28.5 kg (62.8 lbs.)
Interesting Facts: Azumarill has highly developed hearing that allows it to hear distances, even when it is underwater. By keeping still and listening closely, it can tell what is in even wild, fast-moving rivers. Azumarill can make balloons out of air. It makes these air balloons if it spots a drowning Pokémon. It lives in rivers and lakes, and can live in the water all day long.

THE PAPER MODEL
Height: 17.0 cm/6.7 in
Width: 16.9 cm/6.7 in
Depth: 11.8 cm/4.6 in
No. of Pages: 4
No. of Pieces: 38
Level: Easy-Medium
Designer: Brandon
Photo: LuIS

NOTES: Start at the ears and build to the bottom, joining the arms as you go. Close at the indicated place. The feet close at the bottom, glue them to to body as soon as they are done. If connected correctly, it won't need weight to stand. Glue the tail after, but only the first part, gluing the ball is the last thing you'll do. Fez and bowtie are optional.

Download: A4 / Letter

MEGA HOUNDOOM (Happy Halloween!)

229 / M Houndoom - Pokémon Papercraft
Name: M Houndoom
Type: Dark/Fire
Species:  Dark Pokémon
Height: 1.9 m (6'03")
Weight: 49.5 kg (109.1 lbs.)
Interesting Facts: As Mega Houndoom, the ridges on its back thicken, and it gains additional, bone-like rings around the base of its tail. The rings on its tail have small spikes on top, causing them to resemble vertebrae. The ridge at the base of Mega Houndoom's neck is longer and curves forward towards its shoulders. Instead of a band with a skull pendant, there is a large, toothed structure around its neck. This bone-like formation has two large spikes on either side and three pointed teeth on the bottom. Mega Houndoom's horns now point straight up with a small, outward curve in the middle. The two bands on its hind legs have vanished, and those on its forelegs are broken in the front. Its claws are a dark red due to its ability to generate more heat. Finally, the tip of its tail is now split down the middle.

THE PAPER MODEL
Height: 23.3 cm/9.2 in
Width: 11.3 cm/4.4 in
Depth: 20.5 cm/8.1 in
No. of Pages: 6
No. of Pieces: 87
Level: Hard
Designer: LuIS
Photo: LuIS

NOTES: Start at the mouth and glue the horns as you go. The next step is building the legs, build them from the paws up and glue the nails as you go. The leg bones may not need to be glued, place them and check if they stand. The hardest part of the model is building the bones. The neck one is by far the hardest. Start at the collar and build around it, join the bottom of it and close at the middle, by the back. Glue it only AFTER the bigger back bone is glued. You might have to apply some pressure to the neck collar, to give it the perfect shape. The back bones are hard to close only if you do it at the end, the trick is to build it by segments, I mean, close them while you're still building the top part. Join them to the body as soon as the numbers get to them. Make sure to glue the first piece of each of the rear legs BEFORE gluing the last back bone. I suggest placing the tail bones before building the legs. When you glue the tail doesn't matter, in fact, it may be even better to be glued at the end. Close the model at the rear paws and glue the nails after.

Download: A4 / Letter

CELEBI V2

251 / CELEBI (v2) - Pokémon Papercraft
Name: Celebi
Type: Psychic/Grass
Species: Time Travel Pokémon
Height: 0.6 m (2'00")
Weight: 5.0 kg (11.0 lbs.)
Interesting Facts: Celebi is a dual-type Psychic/Grass Legendary Pokémon. It is not known to evolve into or from any other Pokémon. It serves as the guardian of Ilex Forest and is only able to be caught from the wild in Pokémon Crystal with an event activated by the GS Ball. Celebi is the last Pokémon in the Johto Pokédex and Hoenn Pokédex, although in the latter, Celebi is not shown.

THE PAPER MODEL
Height: 22.0 cm/8.7 in
Width: 16.5 cm/6.5 in
Depth: 14.1 cm/5.6 in
No. of Pages: 4
No. of Pieces: 68
Level: Medium
Designer: LuIS
Photo: LuIS

NOTES: The model is divided into two main parts: head and body. Start the head at the face and close at the top. The body starts at the legs and it's closed at the top. Join both parts together by the spike, placing the glue inside the head. Glue the details (such as the antennaes and the wings) after the parts are joined. The antennaes can be kinda tricky to build, but if you get past the first 2 segments at the top, the rest gets easier. You can glue the antennaes before closing the head, to apply presure from the inside. You'll have to weight the model, just before closing the spike at the top of the body, sit the model on the base and put weight litlle by little inside the body and place the head to see when it stand. After it stands, close the body and glue the head to it. The base is simple, start at the top of the trunk and close at the bottom. If you choose to use the leaves and flowers, glue them after the base is built. You can also glue the model to the base.

Download: A4 / Letter

UMBREON HOWL

197 / UMBREON - Howl- Pokémon Papercraft
Name: Umbreon
Type: Dark
Species: Moonlight Pokémon
Height: 1.0 m (3' 3")
Weight: 27.0 kg (59.5 lbs)
Interesting Facts: When agitated, this Pokémon protects itself by spraying poisonous sweat from its pores. Also, on the night of a full moon, or when it gets excited, the ring patterns on its body glow yellow. It evolves from Eevee by Happiness during the night or when around a Moon Shard.

THE PAPER MODEL
Height: 16.5 cm/6.5 in
Width: 9.8 cm/3.9 in
Depth: 15.7 cm/6.2 in
No. of Pages: 4
No. of Pieces: 41
Level: Medium-Easy
Designer: PODragon
Photo: LuIS
NOTES: The model starts at the head and it's closed at the back legs. The ears and tail can be quite heavy, so reinforcing from the inside with scrap paper glued to the place where they connect is highly recommended. Start pieces 38 and 39 by the tabs with the *.

Download: A4 / Letter

UMBREON ATTACK

197 / UMBREON - Attack - Pokémon Papercraft
Name: Umbreon
Type: Dark
Species: Moonlight Pokémon
Height: 1.0 m (3' 3")
Weight: 27.0 kg (59.5 lbs)
Interesting Facts: When agitated, this Pokémon protects itself by spraying poisonous sweat from its pores. Also, on the night of a full moon, or when it gets excited, the ring patterns on its body glow yellow. It evolves from Eevee by Happiness during the night or when around a Moon Shard.

THE PAPER MODEL
Height: 16.5 cm/6.5 in
Width: 9.6 cm/3.8 in
Depth: 17.9 cm/7.1 in
No. of Pages: 4
No. of Pieces: 44
Level: Medium-Easy
Designer: PODragon
Photo: LuIS
NOTES: The model starts at the head and it's closed at the back legs. Some parts can be a bit complicated if you don't pay attention, such as piece 20, start this one by the place close to the * and stop gluing it when you reach the place where piece 23 (right leg) goes, glue the leg and proceed. The ears and tail can be quite heavy, so reinforcing from the inside with scrap paper glued to the place where they connect is highly recommended. The teeth are quite small, so tweezers are recommended, glue them as soon as the mouth is done.

Download: A4 / Letter

LUGIA (SHADOW)

249 / Shadow Lugia - Pokémon Papercraft
Name: Lugia
Type: Psychic/Flying
Species: Diving Pokémon
Height: 5.2 m (17'01")
Weight: 216.0 kg (476.2 lbs)
Interesting Facts: Lugia is the version mascot of Pokémon Silver, its remake Pokémon SoulSilver, and Pokémon XD: Gale of Darkness, appearing on the boxart of them all. In Pokémon XD, Shadow Lugia, codenamed XD001, is a main part of the storyline, and Cipher's ultimate Shadow Pokémon.

THE PAPER MODEL
Height: 21.8 cm/ 8.6 in
Width: 31.1 cm/ 12.2 in
Depth: 26.1 cm/ 10.3 in
No. of Pages: 9
Level: Hard
Designer: LuIS & Brandon
Photo: LuIS
NOTES: Instructions included. Only print the parts needed for building (Pages 2-10), excluding the last page for Shadow Lugia or Lugia, as they're used for the opposite one. Packs included for both.
Be sure to enforce the joints of the legs and wings, as they're the weaker points of the mode (and could collapse otherwise).

Download: Shadow Lugia A4 / Shadow Lugia Letter   -    Lugia (Mirrored) A4 / Lugia (Mirrored) Letter

WOOPER

194 / Wooper - Pokémon Papercraft
Name: Wooper
Type: Water/Ground
Species: Water Fish Pokémon
Height: 0.4 m (1'04")
Weight: 8.5 kg (18.7 lbs)
Interesting Facts: Wooper is a mostly blue amphibious Pokémon that bears a resemblance to a real-life salamander known as an axolotl. Wooper stands upright on its small, round feet, and has a large, thick tail. Wooper also has purple-colored, branching gills coming out of the sides of its head, and what look like dark blue, curved gill-like markings on its torso. Wooper's head is large compared to its body, its mouth is wide and its eyes are small, round, and black in coloration.

THE PAPER MODEL
Height: 14.5 cm/ 2.8 in
Width: 14.5 cm/ 6.6 in
Depth: 13.2 cm/ 8.3 in
No. of Pages: 3
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start at the top of the head, close at the bottom. Attach the tail when possible, applying pressure from the inside to be sure it attaches. Glue on the feet once the body/feet are completed, being sure the model stands.

Download: A4 / Letter

DUNSPARCE

206 / DUNSPARCE - Pokémon Papercraft
Name: Dunsparce
Type: Normal
Species: Land Snake Pokémon
Height: 1.5 m (4'11")
Weight: 14.0 kg (30.9 lbs)
Interesting Facts: At first glance, these Pokémon appear plain. However, Dunsparce make themselves quite elusive. They also are able to dig extremely well and fly a little using their small wings. Dunsparce are extremely shy of human beings and rarely ever make themselves known. However, they are known to swarm on random occasions.

THE PAPER MODEL
Height: 7.2 cm/ 2.8 in
Width: 16.7 cm/ 6.6 in
Depth: 21.0 cm/ 8.3 in
No. of Pages: 2
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the mouth and close at the tip of the tail. Glue the wings and spikes under the mouth as soon as the numbers indicate, so you can apply presure from the inside.

Download: A4 / Letter