GOTHORITA (Halloween Part 2!)

575 / GOTHORITA - Pokémon Papercraft
Name: Gothorita 
Type: Psychic
Species: Manipulate Pokémon
Height: 0.7 m (2′04″)
Weight: 18.0 kg (39.7 lbs.)
Interesting Facts: Gothorita uses starlight as the source of its power, and is able to use its psychic powers to arrange rocks to match the star. It can also use these powers to control people and Pokémon with hypnosis.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 9.4 cm / 3.7 in
Depth: 13.9 cm / 5.5 in
Pages: 4
Pieces: 59
Level: Easy/Medium (The tricky bit here is closing it and being sure it balances - feel free to use a base to help with that!) 
Designer: Brandon
Photo: Build by CrafterWong! Chibi found at his website here! 
NOTES: Start by building piece 1 and build the head from the bottom to the top. Before closing the head, attach all the extra pieces, noted as Braids (and Bows) to the head. Then, build the body from the top down attaching the bows and arms when crossing to them. Glue the head to the body before building the legs. Make sure to place weights in both legs to get the model to stand. After attaching one leg to the body, build the other leg directly to the body and close the model with piece 48. 

Download: A4 / Letter

Chibi found at CrafterWong's website here! 

GOTHITA (Happy Halloween!)

574 / GOTHITA - Pokémon Papercraft
Name: Gothita 
Type: Psychic
Species: Fixation Pokémon
Height: 0.4 m (1′04″)
Weight: 5.8 kg (12.8 lbs.)
Interesting Facts: A small tuft of hair sticks up from the top of its head, and it has two white, bow-shaped feelers on each side of its purple head and a third bow-shaped feeler on its neck. These ribbon-like feelers are used to amplify Gothita's psychic power. It has two large blue eyes with three eyelashes on each and small red lips. Gothita intently observes those around it, becoming so focused, it is unaware of attacks. Its torso is black with a white zigzagging line running horizontally through the middle. Its arms and legs are short and stubby with no visible digits.

THE PAPER MODEL
Height: 11.4 cm / 4.5 in
Width: 6.9 cm / 2.7 in
Depth: 7.9 cm / 3.1 in
Pages: 3
Pieces: 32
Level: Easy 
Designer: Brandon
Photo: Build by CrafterWong! Chibi found at his website here! 
NOTES: Build the model from the top down. Before closing the head, attach the top black piece and white bows to the model. After building the head, build the body from the top down, attaching the arms as you go down. Next, attach the legs and close the model with the stubby section of the piece 30. Place a weight in the model to get the model to stand by itself. 

Download: A4 / Letter

Chibi found at CrafterWong's website here! 

SWADLOON

541 / SWADLOON - Pokémon Papercraft
Name: Swadloon
Type: Bug/Grass  
Species: Leaf-Wrapped Pokémon
Height: 0.5 m (1′08″)
Weight: 7.3 kg (16.1 lbs.)
Interesting Facts: Under its cloak are darker green, limp leaves which frame the sides of Swadloon's face and trail down on the sides of its body. The top of the cloak has two semicircular leaves that form a V shape. On its back are the veins of the leaf as well as a bit at the bottom tip of the cloak resembling a rounded tail. Swadloon lives on the forest floor and converts fallen leaves into nourishment, which helps the surrounding plant life grow.

THE PAPER MODEL
Height: 14.8 cm / 5.8 in
Width: 13.1 cm / 5.2 in
Depth: 21.4 cm / 8.4 in
Pages: 8 (5 normal pages, 3 to be printed on back)
Pieces: 34
Level: Easy
Designer: Brandon
Photo: Photos below provided by Ilana M (above) and Kara (below) via email!

Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Pretty easy one overall, the only real tricky part is doing the "double sided" pieces when printing. Be sure to print pages 5, 7, and 9 on the back of the previous pages (4, 6, 8). You can also skip printing these pages entirely, if you'd rather. From there, it builds pretty normally. Build the "body" first, going off the numbers. Add the scarf on top of the body once built. Then finish it off by topping it with the outer green "shell", and glue on the two leaves to the top of it.  

Download: A4 / Letter

GLOOM

044 / GLOOM - Pokémon Papercraft

Name: Gloom
Type: Grass/Poison
Species:  Weed Pokémon
Height: 0.8 m (2'07″)
Weight: 8.6 kg (19.0 lbs.)
Interesting Facts: Gloom trickles sticky nectar from its mouth with the appearance and consistency of drool. This can be used as a fertilizer for plants. Both this nectar and the flower on Gloom's head release a foul odor strong enough to induce fainting in humans over a mile (1.6 kilometers) away. However, it can also attract prey, and even a very small number of humans find it pleasing. This odor is a key ingredient for some perfume production. When it is in danger, the odor worsens, but it will not emit its odor if it feels safe.

THE PAPER MODEL
Height: 14.0 cm/ 5.5 in
Width: 16.1 cm/ 6.3 in
Depth: 13.0 cm/ 5.1 in
Pages: 6
Pieces: 46
Level: Easy
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site can be found here!)

NOTES: Build the model from the head down and attach the arms when you get to them. Before closing the model, attach the lips, drool, orange leaves and bulbs to the body. Regarding the bulb, glue each individual bulb to each other before gluing them on top of the orange leaves. After closing the model, build the two legs. Place some counterweight, I cut up an eraser cap in each leg, in the foot. Glue one leg on to the model and then play with the gluing placement of the second model to allow the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

Gloom's pictures are cleaned up to be drool free, but don't worry, the drool is all there in the files! 
Textures (and PDFs) included for both Male and Female bulbs too. Textures can be used to modify PDOs as well. 

Download: A4 / Letter

CrafterWong's Site can be found here!

BOLDORE

525 / BOLDORE - Pokémon Papercraft
Name: Boldore 
Type: Rock
Species: Ore Pokémon
Height: 0.9 m (2′11″)
Weight: 102.0 kg (224.9 lbs.)
Interesting Facts: Boldore's crystals shine brightly when it begins overflowing with power or when it is preparing to fire bursts of energy. Because its crystals are valuable, with a fragment being capable of powering a hundred dump trucks, Boldore is targeted for it. It searches for underground water in the caves where it lives; however, because it is uncomfortable around water, it is always very careful about lapping it up.

THE PAPER MODEL
Height: 12.0 cm / 4.7 in
Width: 17.6 cm / 6.9 in
Depth: 15.8 cm / 6.2 in
Pages: 5
Pieces: 33
Level: Easy-Medium
Designer: Brandon
Photo: Photo below received via email from Jonny D! 

Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Pretty easy one overall- build from the face down, attaching the crystals as you go. Attach the teeth, and all three legs to the body before closing with pieces 31/32. The legs each have a joint the glues to the outside of the body and the legs to hold them in place - these get glued before the closing so that you can apply pressure to hold them into place as they dry. Piece 33 is a stand alone "rock" simply to prop up the right leg, as Boldore is in a climbing stance.  

Download: A4 / Letter

AMAURA

698 / AMAURA- Pokémon Papercraft
Name: Amaura
Type: Rock/Ice
Species: Tundra Pokémon
Height: 1.3 m (4′03″)
Weight: 25.2 kg (55.6 lbs.)
Interesting Facts: Amaura is a calm Pokémon that lived over 100 million years ago. It lived in a cold land to avoid predators such as Tyrantrum. Despite its restoration, it is not expected to live long in the heat of current climates. As seen in the anime, it can create auroras. Some Amaura were discovered frozen in ice.

THE PAPER MODEL
Height: 20.0 cm / 7.9 in
Width: 7.8 cm / 3.1 in
Depth: 16.2 cm / 6.4 in
Pages: 4
Pieces: 25
Level: Easy
Designer: Brandon
Photo: Photo below received via email from Kaya!

Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Pretty easy one overall- build from head down, attaching the head "fins" as you go. When folding the fins over on themselves to double side them, it might work best to leave a small gap between the layers at the bottom and use that to attach to the head. Attach the legs as you go, and close at the tail. 

Download: A4 / Letter

Champion Trial Medal & Pokemon Den

Champion Trial Medal - Pokémon Papercraft
Name: Champion Trial Medal (Sword & Shield) 
Type: Gym Badges 
Interesting Facts: Trainers need to collect a certain number of Gym Badges in order to qualify for a region's Pokémon League. Young Trainers usually begin their initial Pokémon journey by traveling from city to city in order to collect them. Badges are small enough to fit easily between one's thumb and index finger and can be pinned to a shirt or kept in a Badge case.

THE PAPER MODEL
Height: 11.4 cm/ 4.5 in
Width: 11.5 cm/ 4.5 in
Depth: 0.6 cm/ 0.24 in
Pages: 4
Pieces: 12 (10 for one version, +2 for badges from other version) 
Level: Easy
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Has some thin pieces, but shouldn't be too bad with how the tabs are laid out. Build piece 1 first, then slot piece 2 into it to have the frame for the badges to lay into. Badges are then numbered in order obtained in-game, with version exclusive badges labeled with Sw/Sh accordingly (for Sword/Shield). Texture for frame included to interchange the background of the frame for desired version - default is Shield, textures and PDFs included for both. 

Download: A4 / Letter

______________________

Pokemon Raid Den - Pokémon Papercraft
Name: Pokemon Raid Den (Sword & Shield) 
Type: Encounter Location  
Interesting Facts: Pokémon Dens look like small stone circles and can be found either on land or in the water. When a Dynamax Pokémon is present, a giant pillar of light emerges from the den, visible from a great distance. When the Pokémon is defeated, the pillar of light disappears.

THE PAPER MODEL
Height: 4.1 cm/ 1.6 in
Width: 19.8 cm/ 7.8 in
Depth: 18.6 cm/ 7.3 in
Pages: 4
Pieces: 16
Level: Easy
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Simple and straightforward- build the outer "pillars" and connect them to the center as indicated by number. Smaller rocky pieces attach in the concave areas between pillars. Bottom is open ended, but could be glued to a piece of paper (textured/colored for bonus points!) to close off if desired. 

Download: A4 / Letter

GALARIAN DARUMAKA

554 / GALARIAN DARUMAKA - Pokémon Papercraft

Name: Galarian Darumaka
Type: Ice
Species:  Zen Charm Pokémon
Height: 0.7 m (2'04″)
Weight: 40.0 kg (88.2 lbs.)
Interesting Facts: Seismic shift in the Galar region long ago caused the warm climate to cool, and Darumaka in this region have adapted to this cooling. The fire that burned within their bodies went out, leaving an organ that produces cold air instead. The colder Darumaka gets, the more energetic it becomes. They can focus their internal energy to breathe out cold air in the form of snow, which they use to make snowballs for ammo in playful snowball fights with each other. Galarian Darumaka enjoys eating Berries produced by Snover. This leads it to prey on Snover often being driven off by Abomasnow.

THE PAPER MODEL
Height: 11.4 cm/ 4.5 in
Width: 12.5 cm/ 4.9 in
Depth: 9.6 cm/ 3.8 in
Pages: 3
Pieces: 32
Level: Easy
Designer: Brandon
Photo: CrafterWong

Chibi shown below can be found here as well! 
NOTES: Build the model from the head down attaching the arms when you get there, and attach the gems and eyebrows before closing the model. In order to get the model to stand by itself  you have three choices: put weight into the right leg (when you look at the model from the front), build the stand provided, or build the chibi Darmuaka to use as a stand -it's just the right height! If you are putting weight in the right leg, build the right leg first and put weight inside of it, I personally placed 3 pennies in the leg. Regardless of what way you choose to get the model to stand, you would close the model with the left leg or tail.

Download: A4 / Letter

GALARIAN DARMANITAN ZEN

555 / GALARIAN DARMANITAN ZEN - Pokémon Papercraft

Name: Galarian Darmanitan Zen
Type: Ice/Fire
Species:  Zen Charm Pokémon
Height: 1.7 m (5'07″)
Weight: 120.0 kg (264.6 lbs.)
Interesting Facts: Galarian Zen Mode Darmanitan resembles a snowman with red eyes and a warped smile on its false top "head", and an angry grin on its lower body, showing razor-sharp teeth. It has two orange hands that resemble mittens on either side of its body and a flame sticking out of the head as its "carrot nose". When it enters Zen Mode, the dormant flame sac reignites back to life. This causes Galarian Darmanitan to change from a gentle disposition into a rampaging state, unleashing fire everywhere without any care for its surroundings, nor if its body starts to melt, making it a threat to others and themselves. It will continue rampaging indiscriminately until its rage is completely gone.

THE PAPER MODEL
Height: 15.2 cm/ 6.0 in
Width: 13.3 cm/ 5.2 in
Depth: 19.5 cm/ 7.7 in
Pages: 4
Pieces: 27
Level: Easy
Designer: Brandon
Photo: CrafterWong

Chibi shown can be found here as well! 
NOTES: Build the model from the head down attaching the flame before you start building the bottom half of the model. Close the model with piece 27, using the opening to place a small weight inside the model on piece 26 to get the model to stand by itself. Primarily you're counterbalancing the flaming nose here. 

Download: A4 / Letter

DARMANITAN ZEN

555 / DARMANITAN ZEN - Pokémon Papercraft

Name: Darmanitan Zen
Type: Fire/Psychic
Species:  Zen Charm Pokémon
Height: 1.3 m (4'03″)
Weight: 92.9 kg (204.8 lbs.)
Interesting Facts: During Zen Mode, which is accessed by Darmanitan with the hidden Ability Zen Mode, its red fur and tan skin changes blue as it bears the resemblance of a Daruma doll. Its eyes turn blank, and its limbs fuse with its body, rendering them immobile. It also only has three toes, as opposed to normal Darmanitan having five. In this state, it is hard as a rock. As it is rendered immobile, it enters in a meditative trance to sharpen their minds, using it as strength emotionally and spiritually to battle and to perform everyday activities such as gather and eat food.

THE PAPER MODEL
Height: 12.0 cm/ 4.7 in
Width: 12.4 cm/ 4.9 in
Depth: 13.2 cm/ 5.2 in
Pages: 4
Pieces: 24
Level: Easy
Designer: Brandon
Photo: CrafterWong

Chibi shown below can be found here as well! 
NOTES: Build the model from the top down attaching the eyebrows, arms, and legs before closing the model with piece 24. Additional texture included that can be used with the PDO that palette swaps with regular Darmanitan as well 

Download: A4 / Letter

CRUSTLE

558 / CRUSTLE - Pokémon Papercraft
Name: Crustle 
Type: Bug/Rock
Species: Stone Home Pokémon
Height: 1.4 m (4′07″)
Weight: 200.0 kg (440.9 lbs.)
Interesting Facts: Crustle is very strong, to the point that it can carry heavy rocks for a long time, even through arid lands where it resides. It fights members of its species over territory in battles which can become very vicious. If its shell breaks during such a fight, it loses. When Crustle's shell breaks, it will become weaker and unsure of itself. Crustle's biggest strength is its thick claws; being strong enough to break even Rhyperior's sturdy carapace.

THE PAPER MODEL
Height: 14.0 cm / 5.5 in
Width: 18.4 cm / 7.2 in
Depth: 14.5 cm / 5.7 in
Pages: 6
Pieces: 38
Level: Easy-Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

Photo (Below): From Illana M via email! 

NOTES: Not a bad one - the bulk of the model is the shell, which is pretty easy overall. Build the face pieces (mouth, eyes, claws) first to have them handy, then build the shell. Once the shell is made, all the pieces can glue onto the shell in their respective places (mouth, eyes, claws on piece 29; legs on the black circles on 30). Piece 38 is meant as a spacer to hold up the shell, as the shell should be raised slightly off the ground - and the legs certainly aren't managing that on their own haha. 

Download: A4 / Letter

Crewmember

000 / CREWMEMBER - Among Us Papercraft
Name: The Sus one 
Type: Imposter
Height: 1.37 m (4′06″)
Weight: 31.7 kg (69.9 lbs.)
Interesting Facts: Crewmembers need to finish their tasks to complete a mission successfully. Among Us' main page can be found here as well!

THE PAPER MODEL
Height: 11.5 cm / 4.5 in
Width: 7.7 cm / 3.0 in
Depth: 5.8 cm / 2.3 in
Pages: 2
Pieces: 9
Level: Easy
Designer: Brandon
Photo: CrafterWong 
NOTES: This model is really simple to build. Build the model from the top down and attach the eyes/visor and backpack before closing the model. Lastly, play with the placement of the legs as the model can stand by itself.

Download: A4 / Letter

GROOKEY

810 / GROOKEY - Pokémon Papercraft
Name: Grookey
Type: Grass
Species: Chimp Pokémon
Height: 0.3 m (1′00″)
Weight: 5.0 kg (11.0 lbs.)
Interesting Facts: Grookey has two, leaf-shaped hair tufts that hold a stick on the top of its head. Besides using it when attacking, Grookey beats this stick rhythmically against the surfaces of all sorts of objects. This has been observed to cause grass to grow, and wilted flowers and leaves seem to regain their color when Grookey drums nearby. The stick used to be a branch from a forest where troops of Grookey lived, and it has a special power due to being exposed to the energy within Grookey's body.

THE PAPER MODEL
Height: 13.9 cm / 5.5 in
Width: 11.7 cm / 4.6 in
Depth: 13.5 cm / 5.3 in
Pages: 4
Pieces: 53
Level: Easy-Medium
Designer: Brandon
Photo: Build by CrafterWong - the Chibi Grookey pictured can be found right here as well!

NOTES: This would be just outright easy if it weren't for those pesky hands and feet. Build the model from the head down. Make sure to attach the ears, nose and head leaf before closing the head. The only possible confusion is when you build piece 17. For part of it, you will need to glue the colored side to the tab - the line where it folds over on itself is colored in red. Once done with the head, build the body starting from the tail/back feet and closing it at the neck with piece 52. You will need to use tweezers or a toothpick in order to apply pressure to the fingers. In order for the model to stand I put two pennies inside the back feet to act as counter weight. Besides that, I hope you enjoy building!

Download: A4 / Letter

Chibi Grookey can be found at CrafterWong's Site!

REGIGIGAS CHIBI

895 / REGIGIGAS CHIBI - Pokémon Papercraft
Name: Regigigas (Chibi) 
Type: Normal
Species: Colossal Pokémon
Height: 3.7 m (12′02″)
Weight: 420.0 kg (925.9 lbs.)
Interesting Facts: Regigigas is a skilled craftsman. It created golems out of inanimate objects and elemental energies, bringing them to life. Regigigas is also capable of controlling these Legendary titans, even if they already belong to a Trainer. It can also survive extreme conditions as it is able to work with the boiling temperatures of magma (1300-2400 °F [700-1300 °C]) as well as frigid ice (-328 °F [-200 °C]). When Regigigas is disturbed from its slumber, it goes on a rampage and shoots powerful beams of energy.

THE PAPER MODEL
Height: 11.4 cm / 4.5 in
Width: 8.2 cm / 3.2 in
Depth: 18.1 cm / 7.1 in
Pages: 3
Pieces: 27
Level: Easy
Designer: Brandon
Photo: CrafterWong (Site can be found here!)

NOTES: Build the model from the head down attaching the arms and shoulder pieces as you go down. Close the model with a leg or the piece behind the leg (#27). This model will not stand by itself so you will need build the stand, build Snowpoint Temple (included, with open PDO for easy scaling if desired), or have to lean up against something. Besides that I hope you enjoy building! 

Download: A4 / Letter

CrafterWong's Site can be found here! 

Links to the other Regis as well: 

Regirock  -  Regice  -  Registeel  -  Regidrago  -  Regieleki 

REGICE CHIBI

378 / REGICE CHIBI - Pokémon Papercraft
Name: Regice(Chibi) 
Type: Ice
Species: Iceberg Pokémon
Height: 1.8 m (5′11″)
Weight: 175.0 kg (385.8 lbs.)
Interesting Facts: In the opening sequence of The Rise of Darkrai, a Regice, Regirock, and Registeel fired Hyper Beams that combined into one. In PK18, a Regice met Pikachu and Meowth's groups at the other side of an ice bridge and sent them into a lake. A Regice appeared in a flashback in Pillars of Friendship!.

THE PAPER MODEL
Height: 8.1 cm / 3.2 in
Width: 9.6 cm / 3.8 in
Depth: 10.1 cm / 4.0 in
Pages: 2
Level: Easy
Designer: CrafterWong
Photo: CrafterWong's Regice can be found here!

NOTES: Build the grey parts of the head first located on page one. Then build, the inside the black part and finally free hand glue the face part to the head. You will need to trim the bottom part of the face so that it fits snuggly together. Finish building downward. In order to get the model to stand by itself, I flipped the pyramids inside out. Besides that, I hope you enjoy building and stay tune!

CrafterWong's Regice can be found here! 

REGIROCK CHIBI

377 / REGIROCK CHIBI - Pokémon Papercraft
Name: Regirock (Chibi) 
Type: Rock
Species: Rock Peak Pokémon
Height: 1.7 m (5′07″)
Weight: 230.0 kg (507.1 lbs.)
Interesting Facts: Regirock debuted alongside the other members of its trio in Lucario and the Mystery of Mew. It is a guardian of the Tree of Beginning, and it was the first to attack perceived intruders Ash and his friends. In the end, Regirock and the other guardians realized they were not a danger and kept on with protecting the Tree of Beginning.

THE PAPER MODEL
Height: 8.5 cm / 3.4 in
Width: 10.2 cm / 4.0 in
Depth: 6.2 cm / 2.4 in
Pages: 2
Level: Easy
Designer: CrafterWong
Photo: CrafterWong's Regirock can be found here!

NOTES: Build the model head down and attach the arms and back pieces before you close the model. Close the model with the piece with no tabs on the first page. This should be the piece with no tabs that you would glue behind the legs. Lastly, this model can naturally stand with a slight angle. If you want the model to stand up close to 90 degrees, use the arms as a way to get the model to stand properly.

CrafterWong's Regirock can be found here! 

REGISTEEL CHIBI

379 / REGISTEEL CHIBI - Pokémon Papercraft
Name: Registeel (Chibi) 
Type: Steel
Species: Iron Pokémon
Height: 1.9 m (6′03″)
Weight: 205.0 kg (451.9 lbs.)
Interesting Facts: Registeel made its main series debut in Overjoyed!, in which Brandon used his Registeel against Ash and Torkoal for a battle that it would win. In Pace - The Final Frontier! it and Regirock blasted off Team Rocket. Brandon brought Registeel to Sinnoh with him in "A Pyramiding Rage!" and "Pillars of Friendship!"

THE PAPER MODEL
Height: 8.0 cm / 3.2 in
Width: 9.8 cm / 3.9 in
Depth: 6.3 cm / 2.5 in
Pages: 2
Level: Easy
Designer: CrafterWong
Photo: CrafterWong's Registeel can be found here!

NOTES: Build the grey parts of the head first located on page one. Then build, the inside the black part and finally free hand glue the face part to the head. You will need to trim the bottom part of the face so that it fits snuggly together. Finish building downward. In order to get the model to stand by itself, I flipped the pyramids inside out. Besides that, I hope you enjoy building and stay tune!

CrafterWong's Registeel can be found here! 

REGIELEKI CHIBI

894 / REGIELEKI CHIBI - Pokémon Papercraft
Name: Regieleki (Chibi) 
Type: Electric
Species: Electron Pokémon
Height: 1.2 m (3′11″)
Weight: 145.0 kg (319.7 lbs.)
Interesting Facts: According to legend, Regieleki was created by Regigigas using pure electric energy. Regieleki absorbs electrons in order to stay alive and is said to have the greatest power of any Electric-type Pokémon. The insulated equipment on it cannot conduct electricity. It is believed to have been placed there by ancient people in order to restrain its powers due to being tormented by Regieleki. Removing the rings is said to unlock the latent powers of Regieleki. It is powerful enough to generate all of Galar's electricity.

THE PAPER MODEL
Height: 6.6 cm / 2.6 in
Width: 3.8 cm / 1.5 in
Depth: 13.6 cm / 5.4 in
Pages: 2
Pieces: 36
Level: Easy
Designer: Brandon
Photo: CrafterWong (Site can be found here!)

NOTES: Build this model from the head down. First build the head piece and then attach the two arms. Make sure that after you attach the two arms that the head is balanced when just placing the head on the floor. Then, attach the mid-section and star shaped bottom piece. After attaching each piece, make sure that the model can stand straight up by itself.  Lastly, attach the legs and you will need to play with where you glue them on the body to allow the model to stand by itself.  Besides that I hope you enjoy building!

 

Download: A4 / Letter

CrafterWong's Site can be found here! 

MACHOP

066 / MACHOP - Pokémon Papercraft
Name: Machop
Type: Fighting
Species: Superpower Pokémon
Height: 0.8 m (2′07″)
Weight: 19.5 kg (43.0 lbs.)
Interesting Facts: Machop's entire body is covered with muscles that will never tire or cramp. With these muscles, it can lift many times its own body weight. Machop is capable of hurling up to 100 adults. It trains by lifting Graveler every day and becomes more dedicated the more its muscles grow. Machop's muscles can never get sore, no matter what training it does. It spends its time and energy practicing all different forms of martial arts and trying to improve its abilities. Once it feels confident, it challenges Makuhita to a battle. Machop lives in the mountains.

THE PAPER MODEL
Height: 17.0 cm / 6.7 in
Width: 9.8 cm / 3.9 in
Depth: 9.3 cm / 3.7 in
Pages: 4
Pieces: 30
Level: Easy
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Pretty straightforward - just work from the top of the head and work your way down. Connect the arms once the first few pieces of the body are on (numbered accordingly), then keep working down and close at the bottom of the feet. 

Download: A4 / Letter

POIPOLE

803 / POIPOLE - Pokémon Papercraft
Name: Poipole
Type: Poison
Species: Poison Pin Pokémon
Height: 0.6 m (2'00″)
Weight: 1.8 kg (4.0 lbs.)
Interesting Facts: Poipole originates from Ultra Megalopolis in Ultra Space, where it is popular as a starter Pokémon. It is capable of understanding human speech after spending enough time with humans. Poipole's large head is filled with a glowing, adhesive poison, which it can fire from the needles on its head. While spraying opponents with this venom, it laughs wildly. The anime reveals that wild Poipole live in nests that resemble wasp or hornet nests alongside Naganadel.

THE PAPER MODEL
Height: 13.9 cm / 5.5 in
Width: 8.3 cm / 3.3 in
Depth: 10.9 cm / 4.3 in
Pages: 2
Pieces: 31
Level: Easy
Designer: Brandon
Photo: Build by CrafterWong

NOTES: Build the head from the bottom up and attach the ear spikes before closing the head with piece 14. For the body build the model from the top down, attaching the arms and legs as you build down. Take particular care with the arms, as they're rather smol. The final step of the model is to build the tail from the body and closing the tail and the model with piece 30, and plop on the tail spike (31) after.  

 

Download: A4 / Letter