MOLTRES

146 / MOLTRES - Pokémon Papercraft

Name: Moltres
Type: Fire/Flying
Species:  Flame Pokémon
Height: 2.0 m (6'07″)
Weight: 60.0 kg (132.3 lbs.)
Interesting Facts: Moltres sheds embers with every flap of its wings, creating a brilliant flash of flames. By dipping itself into the magma of an active volcano, this Pokémon can heal itself. It migrates to the south with the coming of spring and is said to bring an early springtime to cold lands. There have been stories of Moltres using its wings to assist those lost in the mountains. Moltres is rarely seen. In the past, Sky Attack was its signature move.

THE PAPER MODEL
Height: 14.9 cm/ 5.5 in
Width: 38.1 cm/ 6.3 in
Depth: 23.5 cm/ 5.1 in
Pages: 6
Pieces: 77
Level: Hard
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site can be found here!)

NOTES: Build the model from the head and head flame downwards. When you get to the wings, build them and attach them to the body before moving on. When building the wings, build the entire yellow part first, folding the "feathery" edges to give it a slight sharpness and help support the fire/body. Then build the red part of the flame by gluing the white side of the paper together and trimming the excess white part off the model to your desire. If you're feeling fancy, you could even sort of feather the flame piece to give it a bit of definition too. Lastly, glue the red flames inside the yellow wing 'sleeve' and freehand glue them together. Work your way down until you get to the legs. Do NOT close the model with piece 69 until the model can stand by itself. Next, build the legs and tail flame (you can just simply attach this to the body whenever). When building the legs be very careful while building it. They are somewhat small and a toothpick or tweezers will help to make them. To get the model to stand by itself, wrap the wings around the body so that it prevents it from falling on itself. 

Also fun side note - noticed when making textures for this that Moltres occasionally has a red beak and legs instead of the pale apricot color. Textures are included for both. 

Download: A4 / Letter

CrafterWong's Site can be found here!

GLOOM

044 / GLOOM - Pokémon Papercraft

Name: Gloom
Type: Grass/Poison
Species:  Weed Pokémon
Height: 0.8 m (2'07″)
Weight: 8.6 kg (19.0 lbs.)
Interesting Facts: Gloom trickles sticky nectar from its mouth with the appearance and consistency of drool. This can be used as a fertilizer for plants. Both this nectar and the flower on Gloom's head release a foul odor strong enough to induce fainting in humans over a mile (1.6 kilometers) away. However, it can also attract prey, and even a very small number of humans find it pleasing. This odor is a key ingredient for some perfume production. When it is in danger, the odor worsens, but it will not emit its odor if it feels safe.

THE PAPER MODEL
Height: 14.0 cm/ 5.5 in
Width: 16.1 cm/ 6.3 in
Depth: 13.0 cm/ 5.1 in
Pages: 6
Pieces: 46
Level: Easy
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site can be found here!)

NOTES: Build the model from the head down and attach the arms when you get to them. Before closing the model, attach the lips, drool, orange leaves and bulbs to the body. Regarding the bulb, glue each individual bulb to each other before gluing them on top of the orange leaves. After closing the model, build the two legs. Place some counterweight, I cut up an eraser cap in each leg, in the foot. Glue one leg on to the model and then play with the gluing placement of the second model to allow the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

Gloom's pictures are cleaned up to be drool free, but don't worry, the drool is all there in the files! 
Textures (and PDFs) included for both Male and Female bulbs too. Textures can be used to modify PDOs as well. 

Download: A4 / Letter

CrafterWong's Site can be found here!

GALARIAN PONYTA

77 / PONYTA - Galarian - Pokémon Papercraft
Name: Galarian Ponyta
Type: Psychic
Species: Unique Horn Pokémon
Height: 0.8 m (3′03″)
Weight: 24.0 kg (52.9 lbs.)
Interesting Facts: Galarian Ponyta can absorb the life energy located in the atmosphere and store it in its mane, which will then become more colorful and potentially release a shining glow if there is a lot of energy to use. The small horn contains a healing power. Ponyta can heal any slight wounds with a few rubs from its horn. By looking into the eyes of a person, it can read the contents of the heart. Should Ponyta find any evil, it will promptly go back into hiding.

THE PAPER MODEL
Height: 17.0 cm / 6.7 in
Width: 11.1 cm / 4.4 in
Depth: 23.2 cm / 9.1 in
Pages: 9
Pieces: 84
Level: Medium-Hard 
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

Featured Photo from: Eve R. via email!
NOTES: Fluffy to paper is a weird transition, and definitely makes this one a bit tougher for it. Follow the numbers, building the head downward, working in the legs as you go. You will want to weight the right side of the body for sure (opposite the direction the mane flows), as well as probably attach it to a base for good measure. Probably a good time to reference our quite old Paperpokés Pokémon Bases pack as it could come in handy here. Per how the numbers indicate, you'll want to attach the tail to the body before fully closing the body. The mane can be attached to the body after closed, by gluing to the head and the side of the body to try and fully attach it. The mane is also numbered in a tricky way, as the closing point is near the bottom but the tufts have to be attached first - attach 75-78 onto 74 before layering and closing with 79. 

Download: A4 / Letter

MACHOP

066 / MACHOP - Pokémon Papercraft
Name: Machop
Type: Fighting
Species: Superpower Pokémon
Height: 0.8 m (2′07″)
Weight: 19.5 kg (43.0 lbs.)
Interesting Facts: Machop's entire body is covered with muscles that will never tire or cramp. With these muscles, it can lift many times its own body weight. Machop is capable of hurling up to 100 adults. It trains by lifting Graveler every day and becomes more dedicated the more its muscles grow. Machop's muscles can never get sore, no matter what training it does. It spends its time and energy practicing all different forms of martial arts and trying to improve its abilities. Once it feels confident, it challenges Makuhita to a battle. Machop lives in the mountains.

THE PAPER MODEL
Height: 17.0 cm / 6.7 in
Width: 9.8 cm / 3.9 in
Depth: 9.3 cm / 3.7 in
Pages: 4
Pieces: 30
Level: Easy
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Pretty straightforward - just work from the top of the head and work your way down. Connect the arms once the first few pieces of the body are on (numbered accordingly), then keep working down and close at the bottom of the feet. 

Download: A4 / Letter

MEGA BLASTOISE

009 / MEGA BLASTOISE- Pokémon Papercraft
Name: Mega Blastoise
Type: Water
Species: Shellfish Pokémon
Height: 1.6 m (5′03″)
Weight: 101.1 kg (222.9 lbs.)
Interesting Facts: As Mega Blastoise, it develops two smaller shells over its arms, each with their own water cannon. The two cannons on its back are replaced by a single, central water cannon of greater size that can retract into its shell. This cannon extends forward over Mega Blastoise's head and is said to have a blast range of over 6 miles (10 kilometers). Small ridges develop over its now-red eyes and extend to its ears. The ears angle slightly backward and there is a small point on its chin.

THE PAPER MODEL
Height: 18.0 cm / 7.1 in
Width: 16.4 cm / 6.5 in
Depth: 16.6 cm / 6.5 in
Pages: 7
Pieces: 72
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative! 

NOTES: Start with the head and build the front first, working your way down to the arms, legs, and tail. From there, start to work your way back - build the ridge of the shell, then work into the back of the shell. You'll want to close the model on the back of the shell, using the top flaps of piece 69 to fully close after securing it onto the back.  

Download: A4 / Letter

PARASECT

047 / PARASECT - Pokémon Papercraft
Name: Parasect
Type: Bug/Grass
Species: Mushroom Pokémon
Height: 1.0 m (3′03″)
Weight: 29.5 kg (65.0 lbs.)
Interesting Facts: Parasect is an orange, insectoid Pokémon that has been completely overtaken by the parasitic mushroom on its back. It has a small head with pure white eyes and a segmented body that is mostly hidden by the mushroom. It has three pairs of legs with the foremost pair forming large pincers. The fungus growing on its back has a large red cap with yellow spots throughout. The insect has been drained of nutrients and is now under the control of the fully-grown tochukaso. Removing the mushroom will cause Parasect to stop moving.

THE PAPER MODEL
Height: 18.1 cm / 7.1 in
Width: 20.4 cm / 8.0 in
Depth: 20.6 cm / 8.1 in
Pages: 9 (+1 for base)
Pieces: 80
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: The spindly legs may prove a bit difficult, but they aren't load bearing at least - just use the base to help support the body. Since most of this is a bunch of self contained parts, you can actually start pretty much wherever you want. I'd suggest starting with the order laid out on the template though - make the body, then the legs, the claws and then finally the eyes and mushroom. Connect the mushroom and body, attach the eyes, legs and claws. Really the only 'trick' is lining up all the pieces well - use the PDO for this if you can, but if not I've included notes on the template with where everything lines up as well.  

Download: A4 / Letter

MAGIKARP V2

129 / MAGIKARP v2 - Pokémon Papercraft
Name: Magikarp
Type: Water
Species: Fish Pokémon
Height: 0.9 m (2′11″)
Weight: 10.0 kg (22.0 lbs.)
Interesting Facts: Although this Pokémon is capable of surviving in even the most polluted ponds, it is usually overlooked by trainers because it is pathetically weak: even in the heat of battle it will do nothing but flop around. It is not a strong swimmer, and currents in the water will sweep it downstream. It evolves into Gyarados starting at level 20.

THE PAPER MODEL
Height: 8.1 cm/ 3.2 in
Width: 14.9 cm/ 5.9 in
Depth: 14.8 cm/ 5.8 in
Pages: 3
Pieces: 36
Level: Easy
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Build from the mouth, working back, attaching fins and whiskers as soon as possible. Close at the tailfin. Textures and pdfs included for both male/female variations. 


Download: A4 / Letter

SEADRA

117 / SEADRA - Pokémon Papercraft
Name: Seadra
Type: Water
Species: Dragon Pokémon
Height: 1.2 m (3′11″)
Weight: 25.0 kg (55.1 lbs.)
Interesting Facts: Seadra is a blue seahorse-like Pokémon with a long snout and a two fin-like ridges curving over either side of its head. Its belly is covered with rough, cream-colored scales, which have sharp, pointed, cream-colored tips that exude venom. It can swim in any direction while facing forward by rapidly flapping its fins and tail. It spins its body to create large whirlpools and catch prey, that Seadra swallows it whole using its long snout. The venom it has is toxic enough to make humans faint, but is prized among practitioners of traditional medicine. It makes its nest by either wriggling between or anchoring itself to branches of coral under the ocean. It is markedly vicious, and will mercilessly attack those who venture near its nest.. After a female Seadra gives birth, the male Seadra will take care of the young.

THE PAPER MODEL
Height: 25.7 cm / 10.1 in
Width: 23.7 cm / 9.3 in
Depth: 20.9 cm / 8.2 in
Pages: 9
Pieces: 72 (+ 4 for base)
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start the model at the top of the head, follow the numbers until you complete the belly, set it aside and build the tail, starting at the tip. Close the model at 72, joining the body and the tail. I didn't need wight to make it stand with the base. Further instructions included in the template.

Download: A4 / Letter

MEGA SLOWBRO - MERRY CHRISTMAS!

080 / MEGA SLOWBRO - Pokémon Papercraft
Name: Mega Slowbro
Type: Water/Psychic
Species: Hermit Crab Pokémon
Height: 2.0 m (6′07″)
Weight: 120.0 kg (264.6 lbs.)
Interesting Facts: Upon mega evolving, it becomes engulfed by the Shellder to the point where only its head, arms and tail are visible. Due to the legs being engulfed inside the shell, it balances the body by the tail that sticks out at the opening at the tip of Shellder's spiral. It can move by bouncing, using the tail as a spring. Mega Slowbro's energy has gathered into Shellder, which has increased its hardness. This allows it to act as an armor so hard that nothing can scratch it.

THE PAPER MODEL
Height: 20.6 cm / 8.1 in
Width: 13.1 cm / 5.1 in
Depth: 13.9 cm / 5.5 in
Pages: 8
Pieces: 53 + 6 for optional base
Level: Medium
Designer: LuIS
Photo: LuIS
NOTES: Start with the ears, building the head around 3. Close and glue it to the shell when indicated, but only glue the shell teeth AFTER the head is glued. The rest of the model is pretty simple, build following the numbers and glue the details, such as arms and spikes, when the numbers get to them. Close at the bottom and glue the tail to it. I suggest using some sort of small weight inside the tail to give it more stability. Place the set of 58 and 59 inside the base before closing it, to make it sturdier.

Download: A4 / Letter

CUBONE V3 (Happy Halloween!)

104 / CUBONE- Pokémon Papercraft
Name: Cubone
Type: Ground
Species: Lonely Pokémon
Height: 0.4 m (1′04″)
Weight: 6.5 kg (14.3 lbs.)
Interesting Facts: Text

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 10.5 cm / 10.1 in
Depth: 13.7 cm / 5.4 in
Pages: 5
Pieces: 56
Level: Medium/Easy
Designer: Brandon
Photo: LuIS
NOTES: The head can be a bit tricky if you don't fold the indicated lines. Glue the skull and the body once they are both finnished, I also glued the bone to the body, to keep it at the position I wanted.

Download: A4 / Letter

MEOWTH V2 - HAPPY!

052 / MEOWTH - Pokémon Papercraft
Name: Meowth
Type: Normal
Species: Scratch Cat Pokémon
Height: 0.32 m (1'04")
Weight: 4.2 kg (9.3 lbs.)
Interesting Facts: Meowth are valued for their ability to collect coins using Pay Day, as it is the only Pokémon that learns it. Meowth are very fond of anything round and shiny. As such, they have been known to wander about city streets and pick up anything that is round and shiny - coins in particular. It evolves into Persian starting at level 28.

THE PAPER MODEL
Height: 18.0 cm / 7.0 in
Width: 15.2 cm / 5.9 in
Depth: 17.3 cm / 6.8 in
Pages: 4
Pieces: 45
Level: Medium-Easy
Designer: Paperpokés
Photo: LuIS
NOTES: Start at the ears and build the head following the numbers. Glue the whiskers and the medal before closing at the bottom. Start the body at the toes and the tail at the tip. I suggest reinforcing the connection between the body and the tail. Be careful with the paws, they need to be folded at the indicated lines. Close the body at the top and glue the head after both are closed.

Download: A4 / Letter

ATTACK MEOWTH

MEOWTH V2 - ATTACK!

052 / MEOWTH - Pokémon Papercraft
Name: Meowth
Type: Normal
Species: Scratch Cat Pokémon
Height: 0.32 m (1'04")
Weight: 4.2 kg (9.3 lbs.)
Interesting Facts: Meowth are valued for their ability to collect coins using Pay Day, as it is the only Pokémon that learns it. Meowth are very fond of anything round and shiny. As such, they have been known to wander about city streets and pick up anything that is round and shiny - coins in particular. It evolves into Persian starting at level 28.

THE PAPER MODEL
Height: 14.1 cm / 5.5 in
Width: 15.2 cm / 5.9 in
Depth: 17.3 cm / 6.8 in
Pages: 4
Pieces: 45
Level: Medium-Easy
Designer: Paperpokés
Photo: LuIS
NOTES: Start at the ears and build the head following the numbers. Glue the whiskers and the medal before closing at the bottom. Start the body at the toes and the tail at the tip. I suggest reinforcing the connection between the body and the tail. Be careful with the paws, they need to be folded at the indicated lines. Close the body at the top and glue the head after both are closed.

Download: A4 / Letter

HAPPY MEOWTH

SANDSHREW ALOLAN (Merry Christmas!)

027 / SANDSHREW Alolan- Pokémon Papercraft
Name: Sandshrew Alolan Form
Type: Ice/Steel
Species: Mouse Pokémon
Height: 0.7 m (2′04″)
Weight: 40.0 kg (88.2 lbs.)
Interesting Facts: In the Alola region, Sandshrew migrated to snowy mountains due to the volcanic activity near the desert areas. Its body is a light, icy blue and with a cream-colored belly and muzzle. Its head now resembles an igloo. Thicker plates form a dome around its head and its ears resemble an igloo's entrances. In adapting to this cold climate, its body became larger and heavier with a shell of ice covering its hide. The steel-like covering grants it extra defense, but it is unable to curl into a ball like its desert counterpart. Alolan Sandshrew's claws allow it to move without slipping on icy surfaces, but it slides on its stomach when it needs to move quickly.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 18.7 cm / 7.4 in
Depth: 24.3 cm / 9.6 in
Pages: 6
Pieces: 56
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the face, following the numbers. Make sure to glue the inside of the ears before gluing them to the head. Once the head is built, start at the belly, building the body around it. You can either glue the nails now or after the model is closed. Glue the legs after piece 38 is placed, it is important to get a placement as close to the .pdo as possible so it stands without weight. Continue building it by numbers and close at the tip of the tail. Before closing make sure that it stands without weight inside, I didn't need any weight, but if your does add some by the tail.

Download: A4 / Letter

VULPIX ALOLAN (Merry Christmas!)

037 / VULPIX Alolan- Pokémon Papercraft
Name: Vulpix Alolan Form
Type: Ice
Species: Fox Pokémon
Height: 0.6 m (2′00″)
Weight: 9.9 kg (21.8 lbs.)
Interesting Facts: In the Alola region, Vulpix has adapted to snowy mountain peaks. Its fur has become snowy white. It has pale blue paws, blue eyes, and dark blue insides its ears. Its snout is more pronounced and pointed than that of non-Alolan Vulpix. The locks of hair on its head and its six tails are curlier with a wispy appearance. Alolan Vulpix is believed to have arrived in the region at the same time as humans, but moved to the snow-capped mountain to avoid other Pokémon. It can be found in small pack with two to five individuals. Alolan Vulpix can expel breath as cold as -58°F (-50°C), which is capable of freezing anything. While it is not suited to warmer environments, its tail can produce ice to lower the surrounding temperature if needed. According to the Pokédex, an older name for Alolan Vulpix is Keokeo.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 15.3 cm / 6.0 in
Depth: 18.9 cm / 7.4 in
Pages: 6
Pieces: 46
Level: Medium/Hard
Designer: Brandon
Photo: LuIS
NOTES: Start at the top of the tail. Lightly fold the sharper lines to give it a better shape, the valley folds for example. Build the six pieces of the top, starting at the middle two. The back part ofthe tail is the hardest, make sure to take your time there. Build the back around the tail, gluing the legs as soon as they are ready. When you reach 23, put the built part aside and start at the head, from the nose up. Build the ears before gluing the details to it. Glue the curls at the top of the head while you can still apply presure from the inside. Glue piece 38 to the head and only now glue it to the rest of the body. Proceed to the front legs, closing at the front paw.

Download: A4 / Letter

MACHAMP

068 / MACHAMP - Pokémon Papercraft
Name: Machamp
Type: Fighting
Species: Superpower Pokémon
Height: 1.6 m (5′03″)
Weight: 130.0 kg (286.6 lbs.)
Interesting Facts: Machamp is a bipedal, humanoid Pokémon with four well-muscled arms. Its skin is bluish gray, and it has red eyes and pale yellow lips. On its head, there are three, brown ridges right above its eyes. It has two arms on each side of its body: a pair located in the normal position, and another pair directly above that attaches on the top of the shoulders. It has black markings that resemble briefs along with a golden power-save belt. Its legs have considerable muscle tone, and its feet have two toes.

THE PAPER MODEL
Height: 24.0 cm / 9.4 in
Width: 16.6 cm / 6.5 in
Depth: 22.5 cm / 8.9 in
Pages: 8 (+1 for Guitar)
Pieces: 65 (+4 for Guitar)
Level: Medium-Hard
Designer: Brandon
Photo: Carnilmo
NOTES: Follow the numbers on the template. Build from head down, closing with the bottom of the feet. Be careful with the fingers, they can be a bit tricky. Guitar is not required, but adds a fun touch. Textures included for guitar and Machamp.

Download: A4 / Letter

ELECTABUZZ

125 / ELECTABUZZ- Pokémon Papercraft
Name: Electabuzz
Type: Electric
Species: Electric Pokémon
Height: 1.1 m (3′07″)
Weight: 30.0 kg (66.1 lbs.)
Interesting Facts: Electabuzz is a slightly humanoid creature with a few feline traits. It is covered in yellow fur with black stripes; a large stripe on its chest is shaped like a lightning bolt. It has a long tail. There are three, clawed toes on its feet; two in front and one in back, while it has five fingers on each hand. Electabuzz has two sharp fangs and a pair of antennae with bulbous ends. In the dark, Electabuzz will glow a light blue with the electrical charge stored inside of it.

THE PAPER MODEL
Height: 23.7 cm / 9.3 in
Width: 25.3 cm / 10.0 in
Depth: 16.8 cm / 6.6 in
Pages: 6 (+3 for Drums)
Pieces: 62 (+9 for Drums)
Level: Medium-Hard
Designer: Brandon
Photo: Carnilmo
NOTES: Follow the numbers on the template. Build from head down, closing with the bottom of the body at the base of the legs. Be careful with the fingers, they can be a bit tricky. Drums and sticks are not required, but add a fun touch. Textures included for drums and Electabuzz, along with an alternate grey stripe texture.

Download: A4 / Letter

SEEL

086 / SEEL - Pokémon Papercraft
Name: Seel
Type: Water
Species: Sea Lion Pokémon
Height: 1.1 m (3′07″)
Weight: 90 kg (198.4 lbs.)
Interesting Facts: Seel is a pinniped Pokémon with a thick hide covered in bluish white fur. It has a pale tan maw with a large tongue, and tusks on the lower jaw. It has black eyes and nose, that can close while it swims. The horn on the top of the head is used alongside with the tusks to bore through ice floes. It has two flippers on the chest and two on the tail, which resemble a waterspout when raised. It lives on frigid ocean waters. The warm fur and thick hide allow it to swim in cold waters up to -40ºF. It thrives in these cold environments, becoming more active as the temperature drops. It sleeps during the day and hunt under the ice in the late day and evening hours. While a graceful swimmer, it is awkward and struggles to move on dry land.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 18.1 cm / 7.1 in
Depth: 19.6 cm / 7.7 in
Pages: 4
Pieces: 34
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start with the top of the head. Build the mouth around the tongue.Glue the nose and teeth as soon as the numbers get to them, so you can apply pressure from the inside. Close at the indicated place.

Download: A4 / Letter

MEGA CHARIZARD Y - 20 YEARS OF POKÉMON!

006 / MEGA CHARIZARD Y - Pokémon Papercraft
Name: Mega Charizard Y
Type: Fire/Flying
Species: Flame Pokémon
Height: 1.7 m (5′07″)
Weight: 100.5 kg (221.6 lbs.)
Interesting Facts: Upon mega evolving, Charizard Y becomes more sleeky and expansive. While it keeps the type and coloration of Charizard, the pupils are white, three pointed horns on the top of the head, the neck is shorter and the hands much smaller, but with a larger torso and legs. It develops small wings on the wrists, while the ones on he back become larger and have ragged edges. It has three thornes and a much larger flame than regular Charizard. It is said to have incredible flying prowess, reching incredible heights.

THE PAPER MODEL
Height: 20.0 cm / 7.9 in
Width: 34.9 cm / 13.7 in
Depth: 20.9 cm / 8.2 in
Pages: 7
Pieces: 115
Level: Hard
Designer: LuIS
Photo: LuIS
NOTES: Start the model at the head and close at the feet. Needs to be weighed to stand. It's important to reinforce the connection between the wings and the body, glue some scrap paper inside. Further instructions on the packs and the template.

Download: A4 / Letter

MEGA GENGAR - HAPPY HALLOWEEN!

094 / Mega Gengar - Pokémon Papercraft
Name: Mega Gengar
Type: Ghost/Poison
Species: Shadow Pokémon
Height: 1.4 m (4′07″)
Weight: 40.5 kg (89.3 lbs.)
Interesting Facts: When Gengar mega evolves a part of its body sinks into the body. It gets a reddish purple color on the lower portions and a third eye appears on the forehead, which is yellow and allows it to see into other dimensions. The spikes on the back get more numerous and pointy, they also appear on the hands and tail. Mega Gengar has the highest base Special Attack stat of any Poison and Ghost Pokémon. It also has the highest base Speed stat of all Ghost Pokémon and the highest base stat total of all non-legendary Ghost Pokémon.

THE PAPER MODEL
Height: 15.0 cm / 5.9 in
Width: 22.7 cm / 8.9 in
Depth: 19.7 cm / 7.7 in
Pages: 6
Pieces: 86
Level: Medium-Hard
Designer: LuIS
Photo: LuIS
NOTES: Start the model at the spikes at the top of the forehead. Make sure to add the detail at the forehead and the spikes when the numbers get to them. The spikes are repetitive, but easy to build. I also added some reference pictures on the download pack to help glue them on the right place. Close the model at the bottom of the body. The hands are the hard part of the model, take your time with them, follow the numbers and the instructions and you'll be fine. Start them at the middle and build the spikes around it, there are some colored tabs and suggested fold lines on the .pdo to help. Close them at the bottom and glue to the arms. Further instructions added on the template.

Download: A4 / Letter

MEGA CHARIZARD X

006 / M-CHARIZARD X - Pokémon Papercraft
Name: Mega Charizard X
Type: Fire/Dragon
Species: Flame Pokémon
Height: 1.7 m (5'07")
Weight: 110.5 kg (243.6 lbs.)
Interesting Facts: As Mega Charizard X, its body and legs appear more physically fit, though its arms remain thin. Its skin turns black with a sky blue underside extending from the lower jaw to the tip of the tail. Two spikes with blue tips curve upward from the front and back of each shoulder, while the tips of its horns sharpen, turn blue, and curve slightly upward. Its brow and claws are larger, its snout is shorter, and its eyes are now red with white pupils. It has two small, fin-like spikes under each horn and two more down its lower neck. The lower trims of its wings are divided into large, rounded points and each third joint is adorned with a claw-like spike. Mega Charizard X breathes blue flames out the sides of its mouth, and the flame on its tail now burns blue with increased heat.

THE PAPER MODEL
Height: 22.0 cm/7.8 in
Width: 33.1 cm/ 6.2 in
Depth: 28.2 cm/4.4 in
No. of Pages: 9
No. of Pieces: 102
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: Instructions included in the files, along with a couple additional images for a short example.

Download: A4 / Letter