LIEPARD

510 / LIEPARD - Pokémon Papercraft
Name: Liepard 
Type: Dark 
Species: Cruel Pokémon
Height: 1.1 m (3′07″)
Weight: 37.5 kg (82.7 lbs.)
Interesting Facts: Liepard has well-developed muscles that allows it to run silently and strike opponents from behind. It has also been known to vanish and reappear without warning. It is known to be rather moody and vicious. In Galar, it competes with Thievul for territory.

THE PAPER MODEL
Height: 17.0 cm / 6.7 in
Width: 7.0 cm / 2.8 in
Depth: 28.7 cm / 11.3 in
Pages: 5
Pieces: 67
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: The head is the particularly tricky part here - once you're past that, the rest is pretty simple. Start with the head, working your way down and back on the body. Attach the legs as you go (numbered accordingly). Close at the tail, and push the tail into the body where it closes (tail is a separate piece and will just insert triangle to triangle). 

Download: A4 / Letter

GOTHITELLE (Happy Halloween Finale!)

576 / GOTHITELLE - Pokémon Papercraft
Name: Gothitelle
Type: Psychic
Species: Astral Body Pokémon
Height: 1.5 m (4′11″)
Weight: 44.0 kg (97.0 lbs.)
Interesting Facts: Gothitelle's immense psychic power can distort the space around it, showing visions of distant stars and past events, but it dislikes conflict. It can predict the future from the placement and movement of stars and weeps when it discovers the lifespan of its Trainer. It is said that a criminal that a Gothitelle had shown his fate to went missing that same day and was never seen again.

THE PAPER MODEL
Height: 20.3 cm / 8.0 in
Width: 12.2 cm / 4.8 in
Depth: 14.4 cm / 5.7 in
Pages: 8
Pieces: 47
Level: Medium  
Designer: Brandon
Photo: Build by CrafterWong! Chibi found at his website here! 
NOTES: Build the model from the head down attaching each segment to the overall model as you go. For the head, build it from the top down and attach the side headpieces prior to closing the head with piece 12. For the bottom body segment, build the legs first and then attach the other pieces of the segment closing that specific section with piece 44. Besides that the model is quite simple and easy to build.

Download: A4 / Letter

Chibi found at CrafterWong's website here! 

GOTHORITA (Halloween Part 2!)

575 / GOTHORITA - Pokémon Papercraft
Name: Gothorita 
Type: Psychic
Species: Manipulate Pokémon
Height: 0.7 m (2′04″)
Weight: 18.0 kg (39.7 lbs.)
Interesting Facts: Gothorita uses starlight as the source of its power, and is able to use its psychic powers to arrange rocks to match the star. It can also use these powers to control people and Pokémon with hypnosis.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 9.4 cm / 3.7 in
Depth: 13.9 cm / 5.5 in
Pages: 4
Pieces: 59
Level: Easy/Medium (The tricky bit here is closing it and being sure it balances - feel free to use a base to help with that!) 
Designer: Brandon
Photo: Build by CrafterWong! Chibi found at his website here! 
NOTES: Start by building piece 1 and build the head from the bottom to the top. Before closing the head, attach all the extra pieces, noted as Braids (and Bows) to the head. Then, build the body from the top down attaching the bows and arms when crossing to them. Glue the head to the body before building the legs. Make sure to place weights in both legs to get the model to stand. After attaching one leg to the body, build the other leg directly to the body and close the model with piece 48. 

Download: A4 / Letter

Chibi found at CrafterWong's website here! 

GOTHITA (Happy Halloween!)

574 / GOTHITA - Pokémon Papercraft
Name: Gothita 
Type: Psychic
Species: Fixation Pokémon
Height: 0.4 m (1′04″)
Weight: 5.8 kg (12.8 lbs.)
Interesting Facts: A small tuft of hair sticks up from the top of its head, and it has two white, bow-shaped feelers on each side of its purple head and a third bow-shaped feeler on its neck. These ribbon-like feelers are used to amplify Gothita's psychic power. It has two large blue eyes with three eyelashes on each and small red lips. Gothita intently observes those around it, becoming so focused, it is unaware of attacks. Its torso is black with a white zigzagging line running horizontally through the middle. Its arms and legs are short and stubby with no visible digits.

THE PAPER MODEL
Height: 11.4 cm / 4.5 in
Width: 6.9 cm / 2.7 in
Depth: 7.9 cm / 3.1 in
Pages: 3
Pieces: 32
Level: Easy 
Designer: Brandon
Photo: Build by CrafterWong! Chibi found at his website here! 
NOTES: Build the model from the top down. Before closing the head, attach the top black piece and white bows to the model. After building the head, build the body from the top down, attaching the arms as you go down. Next, attach the legs and close the model with the stubby section of the piece 30. Place a weight in the model to get the model to stand by itself. 

Download: A4 / Letter

Chibi found at CrafterWong's website here! 

GENESECT

649 / GENESECT - Pokémon Papercraft
Name: Genesect
Type: Bug/Steel 
Species: Paleozoic Pokémon
Height: 1.5 m (4′11″)
Weight: 82.5 kg (181.9 lbs.)
Interesting Facts: Genesect was revived from a Fossil and technologically enhanced by Team Plasma to create the most powerful Pokémon ever. N had the project canceled and the P2 Laboratory closed because he felt that Pokémon, who he thought to be perfect beings, would lose their beauty if modified by science. However, Scientist Dudley kept working on it, angry that N denied his talent. This scientist reconstructed Genesect and installed the cannon on its back.

THE PAPER MODEL
Height: 21.8 cm / 8.6 in
Width: 26.2 cm / 10.3 in
Depth: 33.0 cm / 13.0 in
Pages: 13
Pieces: 99
Level: Hard
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Pretty tough one overall, with some small pieces, but manageable for sure - even better if you can use the PDO for reference. Any pieces with an "_S" after are only intended for use with the Extremespeed form (picture in Textures folder for reference), which is much more compact and does not need the base. Notes on the template for which pieces need replaced for that as well. Build from the head back, attaching the Cannon, working down toward the Abdomen. The abdomen and cannon are directly connected to each other for the normal form, but are distinctly separated for the Extremespeed form (as noted in template). Attach the shoulders and arms as you go, being pretty particular with the joints so that they're secure and stick. You may need to use a little extra glue, and let it stick and dry for a bit extra just to be sure. Same goes for the leg joints - try and use the base to center and weight the body before fully gluing the legs on. All drives included to swap out as desired. If building the Extremespeed form, the head, cannon (minus pieces 15/16, simply not needed), abdomen, legs, arms will all be separate, self enclosed pieces that glue together after they're all build. Head to Cannon, Abdomen inside, then arms and legs on the frame (like the picture included in Textures). Pages 8-9 are unique to the standing form, and pages 13-14 are unique to the Extremespeed form - feel free to skip the pair of pages that don't correspond to your desired form. 

Download: A4 / Letter

WURMPLE

265 / WURMPLE - Pokémon Papercraft
Name: Wurmple
Type: Bug 
Species: Worm Pokémon
Height: 0.3 m (1′00″)
Weight: 3.6 kg (7.9 lbs.)
Interesting Facts: Wurmple has suction pads at the tips of its feet, which allow it to cling to glass or tree branches without slipping. It can spit white silk that turns gooey when exposed to the air. It can release poison from its tail spikes, which can weaken and poison foes. Wurmple lives in forests. It eats leaves and pulls bark off trees to feed on the sap. Taillow, Swellow, and Starly are natural predators of Wurmple.

THE PAPER MODEL
Height: 16.0 cm / 6.2 in
Width: 9.8 cm / 3.9 in
Depth: 19.9 cm / 7.8 in
Pages: 4 
Pieces: 39
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Not quite as easy as I'd like it to be, but Wurmple is definitely a spikey little worm. Start from the horns on the head, and work your way down. The spikes that are part of the body are numbered to attach as you go, and the spikes that glue on the outside of the body are numbered afterward. Close the body at the white underbelly, and then gently glue on the feet and spikes accordingly. The red spikes don't have tabs to attach, but should be pretty easy to add a thin layer of glue on the edges of the spikes and press them into place on the body. Image included for reference as to where all the spikes go as well.  

Download: A4 / Letter

SIGILYPH

561 / SIGILYPH - Pokémon Papercraft
Name: Sigilyph 
Type: Psychic/Flying
Species: Avianoid Pokémon
Height: 1.4 m (4′07″)
Weight: 14.0 kg (30.9 lbs.)
Interesting Facts: Sigilyph will use its psychic powers to attack anyone who invades its territory. Due to it retaining memories from when it guarded an ancient city or served as the guardians' emissaries, it apparently flies along the same route constantly.

THE PAPER MODEL
Height: 24.2 cm / 9.5 in
Width: 7.3 cm / 2.9 in
Depth: 23.2 cm / 9.1 in
Pages: 3
Pieces: 50
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Pretty easy one overall- build from the antennae down, attaching spikes and antennae as you go. The bottom antennae are its own, self enclosed piece to make it easier to close at the bottom of the body with the inverted triangle, and then insert the antennae's triangle into the bottom. It will almost certainly need a base or hung up in some way.  

Download: A4 / Letter

SWADLOON

541 / SWADLOON - Pokémon Papercraft
Name: Swadloon
Type: Bug/Grass  
Species: Leaf-Wrapped Pokémon
Height: 0.5 m (1′08″)
Weight: 7.3 kg (16.1 lbs.)
Interesting Facts: Under its cloak are darker green, limp leaves which frame the sides of Swadloon's face and trail down on the sides of its body. The top of the cloak has two semicircular leaves that form a V shape. On its back are the veins of the leaf as well as a bit at the bottom tip of the cloak resembling a rounded tail. Swadloon lives on the forest floor and converts fallen leaves into nourishment, which helps the surrounding plant life grow.

THE PAPER MODEL
Height: 14.8 cm / 5.8 in
Width: 13.1 cm / 5.2 in
Depth: 21.4 cm / 8.4 in
Pages: 8 (5 normal pages, 3 to be printed on back)
Pieces: 34
Level: Easy
Designer: Brandon
Photo: Photos below provided by Ilana M (above) and Kara (below) via email!

Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Pretty easy one overall, the only real tricky part is doing the "double sided" pieces when printing. Be sure to print pages 5, 7, and 9 on the back of the previous pages (4, 6, 8). You can also skip printing these pages entirely, if you'd rather. From there, it builds pretty normally. Build the "body" first, going off the numbers. Add the scarf on top of the body once built. Then finish it off by topping it with the outer green "shell", and glue on the two leaves to the top of it.  

Download: A4 / Letter

MOLTRES

146 / MOLTRES - Pokémon Papercraft

Name: Moltres
Type: Fire/Flying
Species:  Flame Pokémon
Height: 2.0 m (6'07″)
Weight: 60.0 kg (132.3 lbs.)
Interesting Facts: Moltres sheds embers with every flap of its wings, creating a brilliant flash of flames. By dipping itself into the magma of an active volcano, this Pokémon can heal itself. It migrates to the south with the coming of spring and is said to bring an early springtime to cold lands. There have been stories of Moltres using its wings to assist those lost in the mountains. Moltres is rarely seen. In the past, Sky Attack was its signature move.

THE PAPER MODEL
Height: 14.9 cm/ 5.5 in
Width: 38.1 cm/ 6.3 in
Depth: 23.5 cm/ 5.1 in
Pages: 6
Pieces: 77
Level: Hard
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site can be found here!)

NOTES: Build the model from the head and head flame downwards. When you get to the wings, build them and attach them to the body before moving on. When building the wings, build the entire yellow part first, folding the "feathery" edges to give it a slight sharpness and help support the fire/body. Then build the red part of the flame by gluing the white side of the paper together and trimming the excess white part off the model to your desire. If you're feeling fancy, you could even sort of feather the flame piece to give it a bit of definition too. Lastly, glue the red flames inside the yellow wing 'sleeve' and freehand glue them together. Work your way down until you get to the legs. Do NOT close the model with piece 69 until the model can stand by itself. Next, build the legs and tail flame (you can just simply attach this to the body whenever). When building the legs be very careful while building it. They are somewhat small and a toothpick or tweezers will help to make them. To get the model to stand by itself, wrap the wings around the body so that it prevents it from falling on itself. 

Also fun side note - noticed when making textures for this that Moltres occasionally has a red beak and legs instead of the pale apricot color. Textures are included for both. 

Download: A4 / Letter

CrafterWong's Site can be found here!

GLOOM

044 / GLOOM - Pokémon Papercraft

Name: Gloom
Type: Grass/Poison
Species:  Weed Pokémon
Height: 0.8 m (2'07″)
Weight: 8.6 kg (19.0 lbs.)
Interesting Facts: Gloom trickles sticky nectar from its mouth with the appearance and consistency of drool. This can be used as a fertilizer for plants. Both this nectar and the flower on Gloom's head release a foul odor strong enough to induce fainting in humans over a mile (1.6 kilometers) away. However, it can also attract prey, and even a very small number of humans find it pleasing. This odor is a key ingredient for some perfume production. When it is in danger, the odor worsens, but it will not emit its odor if it feels safe.

THE PAPER MODEL
Height: 14.0 cm/ 5.5 in
Width: 16.1 cm/ 6.3 in
Depth: 13.0 cm/ 5.1 in
Pages: 6
Pieces: 46
Level: Easy
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site can be found here!)

NOTES: Build the model from the head down and attach the arms when you get to them. Before closing the model, attach the lips, drool, orange leaves and bulbs to the body. Regarding the bulb, glue each individual bulb to each other before gluing them on top of the orange leaves. After closing the model, build the two legs. Place some counterweight, I cut up an eraser cap in each leg, in the foot. Glue one leg on to the model and then play with the gluing placement of the second model to allow the model to stand by itself. Besides that, I hope you enjoy building and stay tuned!

Gloom's pictures are cleaned up to be drool free, but don't worry, the drool is all there in the files! 
Textures (and PDFs) included for both Male and Female bulbs too. Textures can be used to modify PDOs as well. 

Download: A4 / Letter

CrafterWong's Site can be found here!

BOLDORE

525 / BOLDORE - Pokémon Papercraft
Name: Boldore 
Type: Rock
Species: Ore Pokémon
Height: 0.9 m (2′11″)
Weight: 102.0 kg (224.9 lbs.)
Interesting Facts: Boldore's crystals shine brightly when it begins overflowing with power or when it is preparing to fire bursts of energy. Because its crystals are valuable, with a fragment being capable of powering a hundred dump trucks, Boldore is targeted for it. It searches for underground water in the caves where it lives; however, because it is uncomfortable around water, it is always very careful about lapping it up.

THE PAPER MODEL
Height: 12.0 cm / 4.7 in
Width: 17.6 cm / 6.9 in
Depth: 15.8 cm / 6.2 in
Pages: 5
Pieces: 33
Level: Easy-Medium
Designer: Brandon
Photo: Photo below received via email from Jonny D! 

Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Pretty easy one overall- build from the face down, attaching the crystals as you go. Attach the teeth, and all three legs to the body before closing with pieces 31/32. The legs each have a joint the glues to the outside of the body and the legs to hold them in place - these get glued before the closing so that you can apply pressure to hold them into place as they dry. Piece 33 is a stand alone "rock" simply to prop up the right leg, as Boldore is in a climbing stance.  

Download: A4 / Letter

BRAVIARY

628 / BRAVIARY - Pokémon Papercraft

Name: Braviary
Type: Normal/Flying 
Species:  Valiant Pokémon
Height: 1.5 m (4'11″)
Weight: 41.0 kg (90.4 lbs.)
Interesting Facts: Braviary is extremely aggressive, but for noble reasons. It will fight fiercely to help and protect its friends. Even if it is injured or has its life threatened, it will still fight. The more scars it has on its front, the more respect it gets from its peers. Scars on its back will bring it ridicule however. It has earned the nickname "hero of the skies" due to its extreme dedication for its friends. Aiding its valiance, Braviary is extremely strong, capable of lifting a car and flying with it.

THE PAPER MODEL
Height: 21.5 cm/ 8.5 in
Width: 23.7 cm/ 9.3 in
Depth: 23.1 cm/ 9.1 in
Pages: 10 (+4 for Nest base)
Pieces: 89 (+6 for base) 
Level: Medium
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site, and Chibi Braviary, can be found here!)

NOTES: Start building the model with the hair and neck feathers, then work from the beak and work backward to the neck. Make sure to FOLD all the lines for this section when building the hair, similar to Rufflet. When building the top white and red feathers on the face, you will need to glue the non-colored sides to each other to connect the neck feathers to the face feathers. For the side of the face feathers you will need to glue them over onto each other (pieces 18-23 will fold in half and glue to each other), and then glue them to the side of the face accordingly. Work downwards and build and attach the wings when you get there. When you get to piece 55, 84, and 85, make sure to also fold these pieces to get cleaner looking legs. Build the legs and attach them before connecting the rest of the body. Close the model with piece 85 on the right or left leg respectively, then glue the tail feathers between the legs and pieces 78-82. In order to get the model to stand, you can either build the stand and place a counterweight on the stand like another model or you can create a tripod with the two legs and piece 80.

The base (not pictured) is a little different and unique for this model - it's designed to cater to Braviary's specific pose, and the 'empty' nest doesn't have to be all too empty if you build Rufflet with it! Rufflet is to scale with Braviary, and stands right inside the nest. In order for the base to fully hold up Braviary, it's suggested to weight piece 91 before fully closing it, as this will help prevent Braviary from sliding away.  

Download: A4 / Letter

CrafterWong's Site, and Chibi Braviary, can be found here!

RUFFLET

627 / RUFFLET- Pokémon Papercraft

Name: Rufflet
Type: Normal/Flying 
Species:  Eaglet Pokémon
Height: 0.5 m (1'08″)
Weight: 10.5 kg (23.1 lbs.)
Interesting Facts: The thick, black talons on Rufflet's feet are strong enough to break even the hardest of berries, and crack Shellder to consume their insides. It is extremely aggressive from birth and knowingly provokes opponents larger and more powerful than itself, including its own parent to gain acceptance. It sees this as a means of quickly getting stronger.

THE PAPER MODEL
Height: 12.0 cm/ 4.7 in
Width: 10.1 cm/ 4.0 in
Depth: 12.7 cm/ 5.0 in
Pages: 5 
Pieces: 67
Level: Medium
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site, and Chibi Rufflet, can be found here!)

NOTES: First build the head. After that, build the feathers around the head. These feathers are 2d and you MUST fold all the lines in order to get the feathers to look good. When building the feathers, build them in the order from the face to the back of the head. You will need to free hand glue them to the head and do not worry if you do not use all of them. Just make sure that it covers the entire head. Continue working downwards attaching the wings as you go. When making the wings, build the wings and only attach the inside part of the feather to the wing before cutting out the entire feathers (picture included in packs for visual). Attach the head and neck feathers to the body prior to closing the model with the right or left leg. Glue the feet on to the model and let it dry the way you want the model to stand. And with that, I hope you enjoy building and stay tuned!

Download: A4 / Letter

CrafterWong's Site, and Chibi Rufflet, can be found here!

AMAURA

698 / AMAURA- Pokémon Papercraft
Name: Amaura
Type: Rock/Ice
Species: Tundra Pokémon
Height: 1.3 m (4′03″)
Weight: 25.2 kg (55.6 lbs.)
Interesting Facts: Amaura is a calm Pokémon that lived over 100 million years ago. It lived in a cold land to avoid predators such as Tyrantrum. Despite its restoration, it is not expected to live long in the heat of current climates. As seen in the anime, it can create auroras. Some Amaura were discovered frozen in ice.

THE PAPER MODEL
Height: 20.0 cm / 7.9 in
Width: 7.8 cm / 3.1 in
Depth: 16.2 cm / 6.4 in
Pages: 4
Pieces: 25
Level: Easy
Designer: Brandon
Photo: Photo below received via email from Kaya!

Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Pretty easy one overall- build from head down, attaching the head "fins" as you go. When folding the fins over on themselves to double side them, it might work best to leave a small gap between the layers at the bottom and use that to attach to the head. Attach the legs as you go, and close at the tail. 

Download: A4 / Letter

CAMERUPT

323 / CAMERUPT- Pokémon Papercraft
Name: Camerupt
Type: Fire/Ground 
Species: Eruption Pokémon
Height: 1.9 m (6′03″)
Weight: 220.0 kg (485.0 lbs.)
Interesting Facts: Camerupt is a quadrupedal Pokémon that resembles a Bactrian camel. Its body contains amounts of molten lava of 18,000 °F (10,000 °C), which erupts out of its humps if the Pokémon is angered. As shown in the anime, it can become uncontrollably angry when it is struck in the face. It lives in the craters of volcanoes.

THE PAPER MODEL
Height: 15.0 cm / 5.9 in
Width: 22.7 cm / 8.9 in
Depth: 10.4 cm / 4.1 in
Pages: 7
Pieces: 50
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: The real tricky parts here are the "hair" and the way the feet connect - pay attention there and it should be smooth sailing. Build from the hair and work your way down the face, putting in its teeth once the mouth is fully formed. Work your way to the body starting with the hump, attaching the front legs and the volcanoes on its back before working any farther past the hump. When working with the feet (both front and back) each leg and foot under piece has a matching teal edge - match these up and glue the fur back to back here. The hooves should attach to the flat circular pieces, and the circular pieces match back/back with the fur strands to make a fully formed leg/foot. Keep working back, attaching the tail before closing up the body, and attach and close at the back legs.

Download: A4 / Letter

SCRAFTY

560 / SCRAFTY- Pokémon Papercraft
Name: Scrafty
Type: Dark/Fighting
Species: Hoodlum Pokémon
Height: 1.1 m (3′07″)
Weight: 30.0 kg (66.1 lbs.)
Interesting Facts: Scrafty is powerful enough to kick through concrete blocks, and can also spit acidic liquid from its mouth, which it does to taunt opponents. It can protect itself while attacking by pulling up or folding the loose skin around its waist. Scrafty lives in groups with other members of its species. Groups determine hierarchy by crest size, with the Scrafty having the largest crest becoming the leader. A group will attack anything that comes within its territory. Scrafty never leaves its territory for a long time. Though often coming off as rude, it takes good care of its loved ones and its turf.

THE PAPER MODEL
Height: 18.0 cm / 7.1 in
Width: 20.2 cm / 8.0 in
Depth: 8.2 cm / 3.2 in
Pages: 6
Pieces: 48
Level: Medium
Designer: Brandon
Photo: Photo below by Ilana M via email! 
Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: The head, hood, and body+tail are all individual pieces to make each piece a bit easier to close. Start with the crest/fin at the top of the head, working your way down and closing the head at the bottom of it. Next build the hood by number. Build the body from the "neck" down, attaching the arms as you can. Build the legs and tail starting with the tail, then building the shorts/legs around it. You will likely want to use a base or put weights in the tail/feet to be sure it stands as well. Work your way down on the legs, attaching the right leg first and then closing at the bottom of the left leg. Few pieces might be a little tricky, like the arms and hood, so take special care with those. 

Download: A4 / Letter

Champion Trial Medal & Pokemon Den

Champion Trial Medal - Pokémon Papercraft
Name: Champion Trial Medal (Sword & Shield) 
Type: Gym Badges 
Interesting Facts: Trainers need to collect a certain number of Gym Badges in order to qualify for a region's Pokémon League. Young Trainers usually begin their initial Pokémon journey by traveling from city to city in order to collect them. Badges are small enough to fit easily between one's thumb and index finger and can be pinned to a shirt or kept in a Badge case.

THE PAPER MODEL
Height: 11.4 cm/ 4.5 in
Width: 11.5 cm/ 4.5 in
Depth: 0.6 cm/ 0.24 in
Pages: 4
Pieces: 12 (10 for one version, +2 for badges from other version) 
Level: Easy
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Has some thin pieces, but shouldn't be too bad with how the tabs are laid out. Build piece 1 first, then slot piece 2 into it to have the frame for the badges to lay into. Badges are then numbered in order obtained in-game, with version exclusive badges labeled with Sw/Sh accordingly (for Sword/Shield). Texture for frame included to interchange the background of the frame for desired version - default is Shield, textures and PDFs included for both. 

Download: A4 / Letter

______________________

Pokemon Raid Den - Pokémon Papercraft
Name: Pokemon Raid Den (Sword & Shield) 
Type: Encounter Location  
Interesting Facts: Pokémon Dens look like small stone circles and can be found either on land or in the water. When a Dynamax Pokémon is present, a giant pillar of light emerges from the den, visible from a great distance. When the Pokémon is defeated, the pillar of light disappears.

THE PAPER MODEL
Height: 4.1 cm/ 1.6 in
Width: 19.8 cm/ 7.8 in
Depth: 18.6 cm/ 7.3 in
Pages: 4
Pieces: 16
Level: Easy
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Simple and straightforward- build the outer "pillars" and connect them to the center as indicated by number. Smaller rocky pieces attach in the concave areas between pillars. Bottom is open ended, but could be glued to a piece of paper (textured/colored for bonus points!) to close off if desired. 

Download: A4 / Letter

DRAGAPULT

887 / DRAGAPULT - Pokémon Papercraft

Name: Dragapult 
Type: Dragon/Ghost 
Species:  Stealth Pokémon
Height: 3.0 m (9'10″)
Weight: 50.0 kg (110.2 lbs.)
Interesting Facts: Dragapult and its evolutionary family are the ghosts of prehistoric aquatic Pokémon. Dragapult carries a pair of Dreepy inside its horns, which it will fire at its opponents like supersonic missiles during battle. It's said that the Dreepy it carries greatly enjoy being sent flying toward opponents at immense speeds. Much of Dragapult's behavior beyond this, however, remains a mystery.

THE PAPER MODEL
Height: 26.6 cm/ 10.5 in
Width: 27.3 cm/ 10.8 in
Depth: 13.7 cm/ 5.4 in
Pages: 10 
Pieces: 101 (+10 for optional Dreepy parts) 
Level: Medium-Hard
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site can be found here!)

NOTES: Build the fins first, then build the head around them, working down. Build the model down and attach the arms as you go. Do NOT build the fingers until the entire model is complete. I originally built the fingers after I attached the arms but they seemed to get in my way and kept falling off when I was building the body and tail. Continue building downward attaching the legs as you go. When you get to piece 67, you have to make the decision on if you want to build the base or get the model to stand by itself. If you want to build the base do not worry, just build the stand and either glue the model to the base, or slightly weight it still to keep it on the base without glue. If you want the model to stand by itself, you can either glue together 2 stacks of 4 quarters together and then glue them to piece 66/67 or you can put in 8 quarters and 2 pennies into the model (not gluing them together or the model) and play with the location of the weights by rotating the model back and forth once the model is closed to get the model to stand by itself. Close the model with the tail then glue the fingers and Dreepys on. Besides that, I hope you enjoy building! 

Download: A4 / Letter

GALARIAN DARUMAKA

554 / GALARIAN DARUMAKA - Pokémon Papercraft

Name: Galarian Darumaka
Type: Ice
Species:  Zen Charm Pokémon
Height: 0.7 m (2'04″)
Weight: 40.0 kg (88.2 lbs.)
Interesting Facts: Seismic shift in the Galar region long ago caused the warm climate to cool, and Darumaka in this region have adapted to this cooling. The fire that burned within their bodies went out, leaving an organ that produces cold air instead. The colder Darumaka gets, the more energetic it becomes. They can focus their internal energy to breathe out cold air in the form of snow, which they use to make snowballs for ammo in playful snowball fights with each other. Galarian Darumaka enjoys eating Berries produced by Snover. This leads it to prey on Snover often being driven off by Abomasnow.

THE PAPER MODEL
Height: 11.4 cm/ 4.5 in
Width: 12.5 cm/ 4.9 in
Depth: 9.6 cm/ 3.8 in
Pages: 3
Pieces: 32
Level: Easy
Designer: Brandon
Photo: CrafterWong

Chibi shown below can be found here as well! 
NOTES: Build the model from the head down attaching the arms when you get there, and attach the gems and eyebrows before closing the model. In order to get the model to stand by itself  you have three choices: put weight into the right leg (when you look at the model from the front), build the stand provided, or build the chibi Darmuaka to use as a stand -it's just the right height! If you are putting weight in the right leg, build the right leg first and put weight inside of it, I personally placed 3 pennies in the leg. Regardless of what way you choose to get the model to stand, you would close the model with the left leg or tail.

Download: A4 / Letter

GALARIAN DARMANITAN

555 / GALARIAN DARMANITAN - Pokémon Papercraft

Name: Darmanitan 
Type: Ice
Species:  Blazing Pokémon
Height: 1.7 m (5'07″)
Weight: 120.0 kg (264.6 lbs.)
Interesting Facts: Galarian Darmanitan has white fur and blue skin with a giant snowball "afro", a thicker coat than regular Darmanitan, and several ice gems in its fur. In Galar, Darmanitan adapts to the cold by developing an organ that produces cold air while its flame sac becomes dormant. The fire sac has a fighting spirit sleeping within. Also, its nature cools down from a belligerent personality to a timid one. It becomes so timid that it will pretend to be a snowman when it senses humans nearby. The snowball on its head serves as a way of preserving food and other things it finds by storing them in the snowball itself. When in battle, it freezes its giant snowball in order to release powerful headbutts, becoming useful in various situations.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 21.0 cm/ 8.3 in
Depth: 14.2 cm/ 5.6 in
Pages: 6
Pieces: 49
Level: Medium
Designer: Brandon
Photo: CrafterWong

Chibi shown below can be found here as well! 
NOTES: Build the model from the top down attaching the arms and legs when you get there. Before closing the model with piece 34 attach the gems and hands to the model. If you build the model without lines, I highly recommend that you fold the lines for the hands to make it easier to build. 

Download: A4 / Letter