MOLTRES

146 / MOLTRES - Pokémon Papercraft

Name: Moltres
Type: Fire/Flying
Species:  Flame Pokémon
Height: 2.0 m (6'07″)
Weight: 60.0 kg (132.3 lbs.)
Interesting Facts: Moltres sheds embers with every flap of its wings, creating a brilliant flash of flames. By dipping itself into the magma of an active volcano, this Pokémon can heal itself. It migrates to the south with the coming of spring and is said to bring an early springtime to cold lands. There have been stories of Moltres using its wings to assist those lost in the mountains. Moltres is rarely seen. In the past, Sky Attack was its signature move.

THE PAPER MODEL
Height: 14.9 cm/ 5.5 in
Width: 38.1 cm/ 6.3 in
Depth: 23.5 cm/ 5.1 in
Pages: 6
Pieces: 77
Level: Hard
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site can be found here!)

NOTES: Build the model from the head and head flame downwards. When you get to the wings, build them and attach them to the body before moving on. When building the wings, build the entire yellow part first, folding the "feathery" edges to give it a slight sharpness and help support the fire/body. Then build the red part of the flame by gluing the white side of the paper together and trimming the excess white part off the model to your desire. If you're feeling fancy, you could even sort of feather the flame piece to give it a bit of definition too. Lastly, glue the red flames inside the yellow wing 'sleeve' and freehand glue them together. Work your way down until you get to the legs. Do NOT close the model with piece 69 until the model can stand by itself. Next, build the legs and tail flame (you can just simply attach this to the body whenever). When building the legs be very careful while building it. They are somewhat small and a toothpick or tweezers will help to make them. To get the model to stand by itself, wrap the wings around the body so that it prevents it from falling on itself. 

Also fun side note - noticed when making textures for this that Moltres occasionally has a red beak and legs instead of the pale apricot color. Textures are included for both. 

Download: A4 / Letter

CrafterWong's Site can be found here!

REGIGIGAS CHIBI

895 / REGIGIGAS CHIBI - Pokémon Papercraft
Name: Regigigas (Chibi) 
Type: Normal
Species: Colossal Pokémon
Height: 3.7 m (12′02″)
Weight: 420.0 kg (925.9 lbs.)
Interesting Facts: Regigigas is a skilled craftsman. It created golems out of inanimate objects and elemental energies, bringing them to life. Regigigas is also capable of controlling these Legendary titans, even if they already belong to a Trainer. It can also survive extreme conditions as it is able to work with the boiling temperatures of magma (1300-2400 °F [700-1300 °C]) as well as frigid ice (-328 °F [-200 °C]). When Regigigas is disturbed from its slumber, it goes on a rampage and shoots powerful beams of energy.

THE PAPER MODEL
Height: 11.4 cm / 4.5 in
Width: 8.2 cm / 3.2 in
Depth: 18.1 cm / 7.1 in
Pages: 3
Pieces: 27
Level: Easy
Designer: Brandon
Photo: CrafterWong (Site can be found here!)

NOTES: Build the model from the head down attaching the arms and shoulder pieces as you go down. Close the model with a leg or the piece behind the leg (#27). This model will not stand by itself so you will need build the stand, build Snowpoint Temple (included, with open PDO for easy scaling if desired), or have to lean up against something. Besides that I hope you enjoy building! 

Download: A4 / Letter

CrafterWong's Site can be found here! 

Links to the other Regis as well: 

Regirock  -  Regice  -  Registeel  -  Regidrago  -  Regieleki 

REGICE CHIBI

378 / REGICE CHIBI - Pokémon Papercraft
Name: Regice(Chibi) 
Type: Ice
Species: Iceberg Pokémon
Height: 1.8 m (5′11″)
Weight: 175.0 kg (385.8 lbs.)
Interesting Facts: In the opening sequence of The Rise of Darkrai, a Regice, Regirock, and Registeel fired Hyper Beams that combined into one. In PK18, a Regice met Pikachu and Meowth's groups at the other side of an ice bridge and sent them into a lake. A Regice appeared in a flashback in Pillars of Friendship!.

THE PAPER MODEL
Height: 8.1 cm / 3.2 in
Width: 9.6 cm / 3.8 in
Depth: 10.1 cm / 4.0 in
Pages: 2
Level: Easy
Designer: CrafterWong
Photo: CrafterWong's Regice can be found here!

NOTES: Build the grey parts of the head first located on page one. Then build, the inside the black part and finally free hand glue the face part to the head. You will need to trim the bottom part of the face so that it fits snuggly together. Finish building downward. In order to get the model to stand by itself, I flipped the pyramids inside out. Besides that, I hope you enjoy building and stay tune!

CrafterWong's Regice can be found here! 

REGIROCK CHIBI

377 / REGIROCK CHIBI - Pokémon Papercraft
Name: Regirock (Chibi) 
Type: Rock
Species: Rock Peak Pokémon
Height: 1.7 m (5′07″)
Weight: 230.0 kg (507.1 lbs.)
Interesting Facts: Regirock debuted alongside the other members of its trio in Lucario and the Mystery of Mew. It is a guardian of the Tree of Beginning, and it was the first to attack perceived intruders Ash and his friends. In the end, Regirock and the other guardians realized they were not a danger and kept on with protecting the Tree of Beginning.

THE PAPER MODEL
Height: 8.5 cm / 3.4 in
Width: 10.2 cm / 4.0 in
Depth: 6.2 cm / 2.4 in
Pages: 2
Level: Easy
Designer: CrafterWong
Photo: CrafterWong's Regirock can be found here!

NOTES: Build the model head down and attach the arms and back pieces before you close the model. Close the model with the piece with no tabs on the first page. This should be the piece with no tabs that you would glue behind the legs. Lastly, this model can naturally stand with a slight angle. If you want the model to stand up close to 90 degrees, use the arms as a way to get the model to stand properly.

CrafterWong's Regirock can be found here! 

REGIDRAGO CHIBI

895 / REGIDRAGO CHIBI - Pokémon Papercraft
Name: Regidrago (Chibi) 
Type: Dragon
Species: Dragon Orb Pokémon
Height: 2.1 m (6′11″)
Weight: 200.0 kg (440.9 lbs.)
Interesting Facts: Due to its body being formed by crystallized dragon energy, Regidrago is said to have the most powerful Dragon-type moves of all Pokémon. It also has the power of every Dragon-type Pokémon. The energy is said to be the most dense in its central core. According to legend, Regidrago was created by Regigigas using crystallized dragon energy, but it ran out of crystals after building Regidrago's head. It was sealed away in a temple due to the ancient people fearing the destruction it would cause should it ever be completed. It is capable of floating. Regidrago can fire an attack made by intense dragon energy by combining its arms to form a mouth. There's an unproven academic theory that Regidrago's arms were from an ancient dragon.

THE PAPER MODEL
Height: 8.8 cm / 3.5 in
Width: 5.0 cm / 2.0 in
Depth: 10.3 cm / 4.1 in
Pages: 2
Pieces: 24
Level: Easy
Designer: Brandon
Photo: CrafterWong (Site can be found here!)

NOTES: When building this model build each section separately. Many of the pieces (Teeth, Snout) double over on themselves (fold them in half, glue back to back, then they're ready to attach to the next piece). Once everything is made, glue the legs to the main body and when the legs are drying, play with the angle of the head and jaw piece to get the model to stand by itself. When you are happy with how it stands, glue the head and jaw to the body.  Besides that I hope you enjoy building!

 

Download: A4 / Letter

CrafterWong's Site can be found here! 

REGISTEEL CHIBI

379 / REGISTEEL CHIBI - Pokémon Papercraft
Name: Registeel (Chibi) 
Type: Steel
Species: Iron Pokémon
Height: 1.9 m (6′03″)
Weight: 205.0 kg (451.9 lbs.)
Interesting Facts: Registeel made its main series debut in Overjoyed!, in which Brandon used his Registeel against Ash and Torkoal for a battle that it would win. In Pace - The Final Frontier! it and Regirock blasted off Team Rocket. Brandon brought Registeel to Sinnoh with him in "A Pyramiding Rage!" and "Pillars of Friendship!"

THE PAPER MODEL
Height: 8.0 cm / 3.2 in
Width: 9.8 cm / 3.9 in
Depth: 6.3 cm / 2.5 in
Pages: 2
Level: Easy
Designer: CrafterWong
Photo: CrafterWong's Registeel can be found here!

NOTES: Build the grey parts of the head first located on page one. Then build, the inside the black part and finally free hand glue the face part to the head. You will need to trim the bottom part of the face so that it fits snuggly together. Finish building downward. In order to get the model to stand by itself, I flipped the pyramids inside out. Besides that, I hope you enjoy building and stay tune!

CrafterWong's Registeel can be found here!