GULPIN

316 / GULPIN - Pokémon Papercraft
Name: Gulpin
Type: Poison
Species: Stomach Pokémon
Height: 0.4 m (1′04″)
Weight: 10.3 kg (22.7 lbs.)
Interesting Facts: Gulpin can swallow anything its own size due to the fact that it is practically all stomach. Its stomach fluids have enough acidity to melt scrap iron and it isn't what one would call "picky eaters". It will eat anything it can get into its mouth. It evolves into Swalot starting at level 26.

THE PAPER MODEL
Height: 16.0 cm/ 6.3 in
Width: 13.4 cm/ 5.2 in
Depth: 16.9 cm/ 6.7 in
Pages: 4
Pieces: 21
Level: Easy
Designer: PMF
Photo: Toshi
NOTES: Gulpin is pretty much a big ball with a feather on top. Start by building the lips, arms and feather. Then build the whole body from the face to the back and finish by glueing the bottom. You can also glue the bottom and you go, it's up to you.

For the lips, you can either close it with its back pieces or let it open without its back piece glued on. It's because when you'll build the face, you'll see that there's another piece alike the "mouth back piece" where the lips should be. So, you can either build the whole face (lips+face) as one big piece or build it as 2 separate pieces and glue the lips onto the face in the end.

Download: A4 / Letter

FLAAFFY (Chinese New Year 2015)

180 / FLAAFFY - Pokémon Papercraft
Name: Flaaffy
Type: Electric
Species: Wool Pokémon
Height: 0.8 m (2′07″)
Weight: 13.3 kg (29.3 lbs.)
Interesting Facts: Flaaffy's wool is similar to Mareep's in that it stores electricity; however, Flaaffy's wool is much more efficient, so that it can store more electricity than Mareep despite having less wool on its body. They also have rubbery skin to prevent themselves from being electrocuted. Unlike Mareep, Flaaffy are able to stand on their hind legs and are able to use their forelimbs to maniuplate things or deliver blows. It evolves from Mareep starting at level 15, and evolves into Ampharos starting at level 30.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 11.8 cm/ 4.7 in
Depth: 17.6 cm/ 6.8 in
Pages: 5
Pieces: 46
Level: Medium
Designer: PMF
Photo: Toshi
NOTES: You should start building this model from the head to the feet and tail. Start by the face and ears, and then connect them by building the hair around them from top to the shoulder. Glue the arms in and then do the body. Glue the legs, feet and finish with the tail. Lastly, just make the ball at the tip of the tail and glue it on.

Download: A4 / Letter

LAPRAS V2

131 / LAPRAS - Pokémon Papercraft
Name: Lapras
Type: Water / Ice
Species: Transport Pokémon
Height: 2.5 m (8'02")
Weight: 220.0 kg (485.0 lbs)
Interesting Facts: Lapras are social Pokémon, and they swim through the sea in large pods. They keep track of their fellow pod members through use of high-pitched songs they constantly sing, much like whales. Unfortunately they are very docile and do not like to fight, and this has made them an easy target for hunters. They are currently very rare in the wild. Their songs have become very sorrowful in recent times as it has become harder and harder for these peaceful Pokémon to find others of their kind. They are highly intelligent, and have been said to be able to learn human speech. They are very fond of ferrying people on their backs. Lapras is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 20.0 cm/ 7.9 in
Width: 19.7 cm/ 7.8 in
Depth: 20.4 cm/ 8.0 in
Pages: 9
Pieces: 75
Level: Easy/Medium
Designer: PMF
Photo: Skelekitty
NOTES: This model was supposed to be released in time to commemorate the birthday of our beloved fallen comrade, Paperbuff, but unfortunately things didn't work out to plan. We would still like to dedicate Lapras to her, as it was her favorite Pokémon, and we miss her so very much.

This is a very nice model to build, it is relatively straight forward and simple, just follow the numbered pieces. The only trouble you may encounter would be with the assembling of the flippers - you will need tweezers. Included are 2 extra facial expressions: Happy and Sleepy. Other than this, have fun!

Download: A4 / Letter

Lapras v1

GASTRODON

423 / GASTRODON - Pokémon Papercraft

Name: West Sea Gastrodon
Type: Ground / Water
Species: Sea Slug Pokémon
Height: 0.9 m (2'11")
Weight: 29.9 kg (65.9 lbs.)
Interesting Facts: Like its pre-evolution, there are two forms of Gastrodon: West Sea (pink and brown) and East Sea (blue and green), and they are found in the two halves of Sinnoh. It has three eyes in front of its head and two horns protruding from the sides of its head. These might be its antennae used to sense its surroundings. To do this, it waves its head side to side as if it were dancing. If any part of a Gastrodon's boneless body is ever ripped or torn off, it can grow back in very little time. It evolves from Shellos starting at level 30.

THE PAPER MODEL
Height: 22.0 cm/8.7 in
Width: 13.9 cm/ 5.5 in
Depth: 21.1 cm/8.3 in
Pages: 9
Pieces: 75
Level: Medium-Hard
Designer: POdragon
Photo: Skelekitty
NOTES: Build by numbers. Start at the horns, then the head and insert the horns into the appropriate gaps - pay attention to the seam alignment. Then continue down the neck and finish off the shell. Glue the two sides of each ribbon together and attach them to the shell, from the neck down the body and then join them together. Continue down the underside of the body and close model at the belly with good glue.

Download: A4 / Letter



Name: East Sea Gastrodon
Type: Ground / Water
Species: Sea Slug Pokémon
Height: 0.9 m (2'11")
Weight: 29.9 kg (65.9 lbs.)
Interesting Facts: Like its pre-evolution, there are two forms of Gastrodon: West Sea (pink and brown) and East Sea (blue and green), and they are found in the two halves of Sinnoh. It has three eyes in front of its head and two horns protruding from the sides of its head. These might be its antennae used to sense its surroundings. To do this, it waves its head side to side as if it were dancing. If any part of a Gastrodon's boneless body is ever ripped or torn off, it can grow back in very little time. It evolves from Shellos starting at level 30.

THE PAPER MODEL
Height: 22.0 cm/8.7 in
Width: 13.5 cm/ 5.3 in
Depth: 21.4 cm/8.4 in
Pages: 10
Pieces: 85
Level: Medium-Hard
Designer: POdragon
Photo: Skelekitty
NOTES: Build by numbers. Start at the horns and attach the head to it piece by piece. Continue down the neck and attach the shell, moving in an outward direction. Glue the two sides of each ribbon together, and attach it to the shell from the neck down the body, joining the two sections together at the bottom. Continue down the underside of the body and close model at the belly with good glue.

Download: A4 / Letter

SHELLOS

422 / SHELLOS - Pokémon Papercraft
Name: West Sea Shellos
Type: Water
Species: Sea Slug Pokémon
Height: 0.3 m (1'00")
Weight: 6.3 kg (13.9 lbs.)
Interesting Facts: Shellos have two different appearances: West Sea (pink) and East Sea (blue), found on the respective sides of the Sinnoh region. Due to this, there is a myth that the Sinnoh region was once split in two. It evolves into Gastrodon starting at level 30.

THE PAPER MODEL
Height: 17.0 cm/6.7 in
Width: 8.0 cm/ 3.1 in
Depth: 12.8 cm/5.0 in
No. of Pages: 5
No. of Pieces: 48
Level: Medium-Hard
Designer: PMF
Photo: Skelekitty
NOTES: The yellow strips and the crown on it's head are quite fiddly - you will need tweezers. But apart from these tricky sections, the model is quite straight forward. Follow the numbers on the template. We have included 2 alternate expression textures - ^_^ and >_< - but we have only PDF'ed the lineless versions, since you can print out the lined versions with relative ease using the PDO.

Download: A4 / Letter


422 / SHELLOS - Pokémon Papercraft
Name: East Sea Shellos
Type: Water
Species: Sea Slug Pokémon
Height: 0.3 m (1'00")
Weight: 6.3 kg (13.9 lbs.)
Interesting Facts: Shellos have two different appearances: West Sea (pink) and East Sea (blue), found on the respective sides of the Sinnoh region. Due to this, there is a myth that the Sinnoh region was once split in two. It evolves into Gastrodon starting at level 30.

THE PAPER MODEL
Height: 15.6 cm/6.1 in
Width: 10.1 cm/ 4.0 in
Depth: 12.8 cm/5.0 in
No. of Pages: 7
No. of Pieces: 60
Level: Medium-Hard
Designer: PMF
Photo: Skelekitty
NOTES: This model has very fiddly bits, namely the yellow strips and the fins - you will need tweezers. Apart from these thin and tedious sections, the rest of the model is pretty straight forward. Follow the numbers on the template. We have included 2 alternate expression textures - ^_^ and >_< - but we have only PDF'ed the lineless versions, since you can print out the lined versions with relative ease using the PDO.

Download: A4 / Letter

KECLEON

352 / KECLEON - Pokémon Papercraft
Name: Kecleon
Type: Normal
Species: Color Swap Pokémon
Height: 1.0 m (3′03″)
Weight: 22.0 kg (48.5 lbs.)
Interesting Facts: Kecleon is a greenish reptilian Pokémon. It has yellow rings around the eyes as well as having yellow lips and frills. Kecleon has small ridges on its shoulders and a red zigzag stripe about its midsection. It also has a long skinny tail that is usually curled in a helix shape. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 16.6 cm/6.5 in
Width: 21.3 cm/ 8.4 in
Depth: 21.1 cm/8.3 in
Pages: 4
Pieces: 30
Level: Medium
Designer: Brandon
Photo: Brandon
NOTES: It's a pretty simple model, until you get to the tail and feet. Just be sure to build and attach the tail before moving on to the feet, and close at the bottom of the feet. It will need weight in the right foot in order to stand, even more if you use the tongue.
You can also make the tongue detachable with the aid of magnets: put a small chunk of a magnet in the inside of the mouth, behind the square in the back. Just before closing the tongue, glue some bits of paperclip into the corresponding square face at the base of the tongue. It will provide a bond which makes the tongue stay in the mouth, but not a permanent one.

Download: A4 / Letter

SHARPEDO

319 / SHARPEDO - Pokémon Papercraft
Name: Sharpedo
Type: Water / Dark
Species: Brutal Pokémon
Height: 1.8 m (5′11″)
Weight: 89.2 kg (195.8 lbs.)
Interesting Facts: Sharpedo is a generally dreaded and distrusted Pokémon. Sharpedo moves through the sea by swimming at speeds of up to 120 km/h (75 mph) by forcing water out of its rear. Its teeth are strong enough to bite through metal, and they grow back rapidly if they snap off. Sharpedo is driven by an unruly, caustic urge to attack and destroy anything that enters its domain. As a result of its temperament and its armament, just one Sharpedo can effectively tear apart an oil tanker. It evolves from Carvanha starting at level 30.

THE PAPER MODEL
Height: 18.0 cm/7.1 in
Width: 18.1 cm/ 7.1 in
Depth: 12.6 cm/5.0 in
No. of Pages: 3
No. of Pieces: 38
Level: Medium
Designer: PMF
Photo: PMF
NOTES: The easiest way to build it is by starting at the mouth and building the pieces up to the back flippers (aka "arms" on each sides). You'll want to glue the top and bottom fins as you build the body, then close the back and build each side flippers, closing them at the tips. You can also build the flippers and then glue them to the body but it will be a lot harder to close well.

The base is quite easy to build and you can add some weight in the base if you want. The model should rest with the "bottom" on the wave and the tip of the bottom fin at the base.

Download: A4 / Letter