REGIELEKI CHIBI

894 / REGIELEKI CHIBI - Pokémon Papercraft
Name: Regieleki (Chibi) 
Type: Electric
Species: Electron Pokémon
Height: 1.2 m (3′11″)
Weight: 145.0 kg (319.7 lbs.)
Interesting Facts: According to legend, Regieleki was created by Regigigas using pure electric energy. Regieleki absorbs electrons in order to stay alive and is said to have the greatest power of any Electric-type Pokémon. The insulated equipment on it cannot conduct electricity. It is believed to have been placed there by ancient people in order to restrain its powers due to being tormented by Regieleki. Removing the rings is said to unlock the latent powers of Regieleki. It is powerful enough to generate all of Galar's electricity.

THE PAPER MODEL
Height: 6.6 cm / 2.6 in
Width: 3.8 cm / 1.5 in
Depth: 13.6 cm / 5.4 in
Pages: 2
Pieces: 36
Level: Easy
Designer: Brandon
Photo: CrafterWong (Site can be found here!)

NOTES: Build this model from the head down. First build the head piece and then attach the two arms. Make sure that after you attach the two arms that the head is balanced when just placing the head on the floor. Then, attach the mid-section and star shaped bottom piece. After attaching each piece, make sure that the model can stand straight up by itself.  Lastly, attach the legs and you will need to play with where you glue them on the body to allow the model to stand by itself.  Besides that I hope you enjoy building!

 

Download: A4 / Letter

CrafterWong's Site can be found here! 

TAPU FINI

788 / TAPU FINI - Pokémon Papercraft
Name: Tapu Fini
Type: Water/Fairy
Species: Land Spirit Pokémon
Height: 1.3 m (4′03″)
Weight: 21.2 kg (46.7 lbs.)
Interesting Facts: As the guardian of Poni Island, Tapu Fini can freely manipulate water and gains energy from ocean currents. To avoid harm to itself in battle, it shrouds its surroundings in a mysterious fog that sends its opponents into a self-destructive trance. The guardian also unleashes this fog as a test for those who seek the special water it can create, which is said to purify anything it touches. Many humans have attempted this trial, including those with ill intent; disgusted by this history, Tapu Fini does not care much for humans. Despite this, it is willing to help those who prove themselves worthy.

THE PAPER MODEL
Height: 30.2 cm / 11.9 in
Width: 23.2 cm / 9.1 in
Depth: 26.7 cm / 10.5 in
Pages: 16
Pieces: 80 
Level: Hard
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: All of the Tapus are a bit tough, and this one is no exception. If you can get past the spindly hands/arms and the large shell, it's not too awful overall though. Following the numbers, start from the top of the hair and work your way down. Close the hair at the bottom, top with the 'crest' and then continue onto the body. Work from the head down with the body, closing at the bottom of the legless base (this part will attach to the shell later). The head just pushes onto the body via the triangular piece up top. Move onto the arms and shoulders. The flat pieces (39-43,54-58) are the fingernails (purple) and handwebbing (black gray). For the nails, just fold and glue them over on each other (doublesided) and glue to the ends of each of the fingers. For the webbing, fold them over (without gluing) and glue the ends of each to the area at the base between each set of fingers. Images included in download packs to help here too. From here, the shells and bases are the only things left - close the shells at the flat ends (as indicated) on the outside, and close the bases at the bottom. 

Download: A4 / Letter

TAPU BULU

787 / TAPU BULU- Pokémon Papercraft
Name: Tapu Bulu
Type: Grass/Fairy
Species: Land Spirit Pokémon
Height: 1.9 m (6′03″)
Weight: 45.5 kg (100.3 lbs.)
Interesting Facts: This guardian of Ula'ula Island is able to command vegetation to grow and change shape to its will. Despite its fearsome power, it is largely inactive, leading some to consider it a lazy Pokémon. It has a peaceful disposition and does not like to cause unnecessary violence, so it rings the bell on its tail to alert others of its presence. However, it is merciless to those who offend it and it is said to have once repelled thieves from its ruins by.

THE PAPER MODEL
Height: 29.3 cm / 11.5 in
Width: 12.3 cm / 4.8 in
Depth: 29.9 cm / 11.8 in
Pages: 12
Pieces: 71
Level: Hard
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: All of the Tapus are pretty tough, and this one is no exception. Everything on the template is numbered, so be sure to follow those, but it's 'basically' work from the head/hat down. The hat, body, and hands/arms are all separate, so build and assemble as needed. The body builds from the top down, the hat builds from one side to the other, and arms build from the hand to shoulder. Close at the bottom of the bell by inserting the inside of it with the tail tip. The body is rather awkward, so the base might not help all too much unfortunately, but weighting it a bit with the base may help. 

 

Download: A4 / Letter

TAPU LELE

786 / TAPU LELE- Pokémon Papercraft
Name: Tapu Lele
Type: Psychic/Fairy
Species: Land Spirit Pokémon
Height: 1.2 m (3′11″)
Weight: 18.6 kg (41.0 lbs.)
Interesting Facts: This guardian of Akala Island is known to scatter glowing scales, which affect others by stimulating and healing their bodies; however, these scales are also dangerous if too many are touched at once. Some consider it to be cruel for the way it destroys others as it scatters its scales for its own amusement. An old legend says that Tapu Lele ended a war between Alola's islands by healing the tired warriors with its scales, but rumors point to a more disturbing truth behind this story. Its strength comes from the energy stored within its shell. If Tapu Lele finds itself at a disadvantage in battle, it will prioritize not outright losing as opposed to trying for a decisive victory. It is said to gain energy from the scent of flowers.

THE PAPER MODEL
Height: 29.0 cm / 11.4 in
Width: 14.2 cm / 5.6 in
Depth: 15.8 cm / 6.2 in
Pages: 10
Pieces: 77
Level: Hard
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: All of the Tapus are pretty tough, and this one is no exception. Everything on the template is numbered, so be sure to follow those, but it's 'basically' work from the head down. The hat, head, body, and hands are all separate, so build and assemble as needed. The body builds from the bottom up, the head builds from the bottom up, and the hat builds from the inside out- closing at the top. Take particular care with the hair (PDO or EdgeID pdf will help immensely here). 

 

Download: A4 / Letter

TAPU KOKO

785 / TAPU KOKO- Pokémon Papercraft
Name: Tapu Koko
Type: Electric/Fairy
Species: Land Spirit Pokémon
Height: 1.8 m (5′11″)
Weight: 20.5 kg (45.2 lbs.)
Interesting Facts: This Pokémon is called the guardian deity of Melemele Island. It's known for protecting its home, but it is fickle and will not necessarily help people in need. However, it is very curious, and may come to play or battle with people or Pokémon that interest it. It is able to store electricity by closing itself inside the shells on its arms. It has an explosive temper, but it instantly forgets what enraged it in the first place.

THE PAPER MODEL
Height: 30.2 cm / 11.9 in
Width: 22.9 cm / 9.0 in
Depth: 24.1 cm / 9.5 in
Pages: 10
Pieces: 77
Level: Hard
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: All of the Tapus are pretty tough, and this one is no exception. Everything on the template is numbered, so be sure to follow those, but it's 'basically' work from the head down. The crest/head can be pretty tough in particular, as they're quite pointed and narrow, so take particular care with those. The head and the body are separate pieces too, and the body needs to be done from the bottom up, attaching the arms and shoulders as you go. Use the bases to help support the body and arms/shell. 

 

Download: A4 / Letter

ZYGARDE

718 / ZYGARDE (50% Forme) - Pokémon Papercraft
Name: Zygarde
Type: Dragon/Ground
Species: Order Pokémon
Height: 5.0 m (16′05″)
Weight: 305.0 kg (672.4 lbs.)
Interesting Facts: Zygarde is a Pokémon whose form depends on the percentage of its Cores and Cells gathered together. Zygarde Core is the brain of Zygarde. It is a small, green Pokémon with a gelatinous body. It has a large, round head with a beak-shaped protrusion on the front, a thin, hook-shaped tail, and a red hexagon suspended in its body. Within its head is a single eye with a black pupil; beside this eye is another white oval that may be a second eye.

THE PAPER MODEL
Height: 21.9 cm / 8.6 in
Width: 21.0 cm / 8.3 in
Depth: 16.9 cm / 6.7 in
Pages: 6
Pieces: 41
Level: Medium
Designer: Brandon
Photo: Photo below by Hunter B via email!

Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Start from the head, work your way back - be careful with the back 'fins' - they're a little thin, and will need to be connected to each other pretty carefully. Once the head and fins are made, it's pretty smooth sailing; just finish the tail, and attach the last 5 pieces to the back of the closed tail. Will likely need weight in the back half of the body/tail to counterbalance the head properly as well. 

Download: A4 / Letter

VIRIZION

640 / VIRIZION - Pokémon Papercraft
Name: Virizion
Type: Grass/Fighting
Species: Grassland Pokémon
Height: 2.0 m (6′07″)
Weight: 200.0 kg (440.9 lbs.)
Interesting Facts: Virizion is a stag or antelope-like, quadruped Pokémon that is primarily green. On the sides of its head are long horns that end in dull, curled points. It has a pointed snout with a black blaze running from its nose to the back of its head. Its face, hind legs, and underside are white. There is a pinked-tipped leaf on each side of its neck, and leafy tufts on its shoulders. On its back, there are pointed tufts of fur forming a medium-long tail. Its lower legs resemble knee-high boots with pink highlights at the knees, and it has black hooves.

THE PAPER MODEL
Height: 17.0 cm / 6.7 in
Width: 12.4 cm / 4.9 in
Depth: 12.9 cm / 5.1 in
Pages: 4
Pieces: 76
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: There are a few small pieces for the head/legs, but nothing too awful - just follow the numbers and work your way down from the head, attaching the front legs as you work your way back towards the tail. Make the tail before working your way down and closing at the bottom of the back legs. Each of the legs has the bottom half disconnected, to make it easier to close and attach, giving it the 'boot' like appearance.  

Download: A4 / Letter

LATIOS V2

381 / LATIOS v2 - Pokémon Papercraft
Name: Latios
Type: Dragon/Psychic
Species: Eon Pokémon
Height: 2.0 m (6′07″)
Weight: 60.0 kg (132.3 lbs.)
Interesting Facts: Latios is a Pokémon with a birdlike body stylized after a plane. Its body flows slowly into a thick neck, giving it a bulky appearance. It has no legs, usually floating instead. Most of its body is blue, with white areas near its arms and a white stripe on its back that extend up to its head. Jet-plane wings sit on top of its back, while two tall, jagged fins point behind it from its rear. A red triangle marks the center of its chest, while a blue mask partially covers its face.

THE PAPER MODEL
Height: 16.5 cm / 6.5 in
Width: 19.5 cm / 7.7 in
Depth: 23.9 cm / 9.4 in
Pages: 5
Pieces: 70
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Start from the head, work your way back - be extra careful attaching the arms and the wings, especially since they're pretty close to each other. Close at the butt,  ending on piece 68. 69-70 are an optional base, but will certainly help it stay on a sort of pedestal. 

Download: A4 / Letter

MEGA RAYQUAZA

384 / MEGA RAYQUAZA- Pokémon Papercraft
Name: Mega Rayquaza
Type: Dragon/Flying
Species: Sky High Pokémon
Height: 10.8 m (35′05″)
Weight: 392.0 kg (864.2 lbs.)
Interesting Facts: In Hoopa and the Clash of Ages, a Shiny Rayquaza capable of Mega Evolving was summoned alongside Latios and Latias by Hoopa to protect it from the shadow Hoopa Unbound. The trio protected Hoopa from the shadow Hoopa and its reinforcements, Primal Groudon, Primal Kyogre, Dialga, Palkia, Giratina, and Kyurem, in Dahara City. Eventually, the battle ended after the shadow Hoopa was sealed in a Prison Bottle, and Rayquaza departed for its home. 

THE PAPER MODEL
Height: 24.9 cm / 9.8 in
Width: 16.1 cm / 6.3 in
Depth: 31.5 cm / 12.4 in (due to various long ribbons)
Pages: 9, +2 for instructions/reference
Pieces: 128
Level: Hard
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative! 

            This one was sent in by Lance via our email! 
NOTES: Various instructions included on template, along with numbers. Definitely follow the numbers and work your way from the head down. The body segments work exactly the same as our regular Rayquaza model (with a little more detail)- match up the number, and everything flows well together. The fins and 'ribbon' segments might be the most difficult part to connect just right, and using a reference (such as the Official Art picture on the last page of the model) to see how everything connects should help. Putting wire inside the 'ribbons' (the last few pages) can help with getting them to pose just right as well.  Definitely no need to print the last 2 pages, as those are all instructions and reference. Overall this is a fairly tough model, and you should take your time building it to get things just right, especially with the smaller parts. PDO reference, if possible, is extremely helpful.

Download: A4 / Letter

MEGA LATIOS

381 / M Latios - Pokémon Papercraft
Name: M Latios
Type: Dragon/Psychic
Species:  Eon Pokémon
Height: 2.3 m (7'07")
Weight: 70.0 kg (154.3 lbs.)
Interesting Facts: Latios made its debut appearance in Pokémon Heroes. Annie and Oakley captured Latios and used it to power the Defense Mechanism of Alto Mare along with the stolen Soul Dew. Latios ended up sacrificing itself to save Alto Mare from an enormous tidal wave.

THE PAPER MODEL
Height: 16.0 cm/6.3 in
Width: 44.8 cm/17.6 in
Depth: 28.9 cm/11.4 in
No. of Pages: 10 (Including Base)
No. of Pieces: 71
Level: Medium
Designer: Brandon
Photo: LuIS

NOTES: Start at the head and build by numbers until you get to the tail, glue the arms (using the base as a tool to glue them on the right position) and only after close. It's important to note that the arms are very heavy and the tube that holds them to the body is very small, so it may collapse if not reinforced with a tube of rolled paper inserted inside. The is not as hard as it seems, take your time, join one at a time to the hand and you'll be fine. The medium-hard for Mega Latias is due to the hands, the pieces get small, and a bit harder to build, but besides that shouldn't be too hard. Further instructions included on the template.

Base, Soul Dew, and Mega Stones included, as well as eye textures for Latias. The only difference for Latias is eye, and size.

Download: A4 / Letter

MEGA LATIAS

380 / M Latias - Pokémon Papercraft
Name: M Latias
Type: Dragon/Psychic
Species:  Eon Pokémon
Height: 1.8 m (5'11")
Weight: 52.0 kg (114.6 lbs.)
Interesting Facts: A Latias also appeared in Pikachu's Ocean Adventure where, along with Latios, it used its powers to help Pikachu, Meowth, and the other Pokémon search for the legendary "Wailord's Tear" beneath the ocean. A Latias appeared in SS025 under the ownership of Nurse Joy. It was used against Forrest's Rhyperior in a battle to prove Forrest's capabilities as a potential Gym Leader, where Latias proved victorious.

THE PAPER MODEL
Height: 12.5 cm/4.9 in
Width: 35.0 cm/13.8 in
Depth: 22.6 cm/8.9 in
No. of Pages: 6 (Including Base)
No. of Pieces: 71
Level: Medium-Hard
Designer: Brandon
Photo: LuIS

NOTES: Start at the head and build by numbers until you get to the tail, glue the arms (using the base as a tool to glue them on the right position) and only after close. It's important to note that the arms are very heavy and the tube that holds them to the body is very small, so it may collapse if not reinforced with a tube of rolled paper inserted inside. The is not as hard as it seems, take your time, join one at a time to the hand and you'll be fine. The medium-hard for Mega Latias is due to the hands, the pieces get small, and a bit harder to build, but besides that shouldn't be too hard. Further instructions included on the template.

Base, Soul Dew, and Mega Stones included, as well as eye textures for Latias. The only difference for Latias is eye, and size.

Download: A4 / Letter

LANDORUS (INCARNATE)

645 / LANDORUS (Incarnate Forme) - Pokémon Papercraft
Name: Landorus
Type: Ground/Flying
Species: Abundance Pokémon
Height: 1.5 m (4'11")
Weight: 68.0 kg (149.9 lbs.)
Interesting Facts: Landorus made his debut in Stopping the Rage of Legends! Part 1. He appeared in the legend of Milos Island related to Ash and his friends by Lewis, and later appeared at the end of the episode when called to stop the battle of Tornadus and Thundurus. He then appeared in Stopping the Rage of Legends! Part 2, where he managed to subdue the other members of the Forces of Nature. He hasn't however, managed to subdue the Landorus-EX hype.

THE PAPER MODEL
Height: 22.7 cm/8.9 in
Width: 25.8 cm/ 10.2 in
Depth: 24.3 cm/9.6 in
No. of Pages: 9
No. of Pieces: 90
Level: Hard
Designer: Brandon
Photo: Olber
NOTES: Build from top to bottom. Do the Cloudy- Hair first. Then go your way down. Be patient with fingers. Build the Cloud base from bottom to top. Stick the tail when you're done.  No need to print the last page (or first page, as usual). Additional notes on template.

Download: A4 / Letter

TORNADUS (INCARNATE)

641 / TORNADUS (Incarnate Forme) - Pokémon Papercraft
Name: Tornadus
Type: Flying
Species: Cyclone Pokémon
Height: 1.5 m (4'11")
Weight: 63.0 kg (138.9 lbs.)
Interesting Facts: In Incarnate Forme, Tornadus is a green, muscular humanoid Pokémon, which resembles a genie. It is a male-only species with no female counterpart. On its forehead are two, purple, long and sharp horns. Tornadus has white, wavy and billowy styled hair, a spiky white mustache and two pointed green ears on either side of its head. Its eyes are yellow with beady white irises and no visible pupils.

THE PAPER MODEL
Height: 26.0 cm/10.2 in
Width: 22.2 cm/ 8.7 in
Depth: 27.9 cm/11.0 in
No. of Pages: 11
No. of Pieces: 88
Level: Hard
Designer: Brandon
Photo: Olber
NOTES: Build from top to bottom. Do the Cloudy- Hair first. Then go your way down. Be patient with fingers. Build the Cloud base from bottom to top. Stick the tail when you're done.

Download: A4 / Letter

THUNDURUS (INCARNATE)

642 / THUNDURUS (Incarnate Forme) - Pokémon Papercraft
Name: Thundurus
Type: Electric/Flying
Species: Bolt Strike Pokémon
Height: 1.5 m (4'11")
Weight: 65.0 kg (143.3 lbs.)
Interesting Facts: In Incarnate Forme, Thundurus is a blue, muscular humanoid Pokémon, which resembles a genie. It is a male-only species with no female counterpart. On its head is a single, long, sharp, purple horn. Thundurus has white, zigzagging and jutting styled hair, a spiky white mustache and two pointed blue ears on either side of its head. Its eyes are yellow with beady white irises and no visible pupils.

THE PAPER MODEL
Height: 25.7 cm/10.1 in
Width: 24.2 cm/ 9.5 in
Depth: 29.5 cm/11.6 in
No. of Pages: 11
No. of Pieces: 99
Level: Hard
Designer: Brandon
Photo: Olber
NOTES: Build from top to bottom. Do the Cloudy- Hair first. Then go your way down. Be patient with fingers. Build the Cloud base from bottom to top. Stick the tail when you're done.

Download: A4 / Letter

PHIONE

489 / Phione - Pokémon Papercraft
Name: Phione
Type: Water
Species: Sea Drifter Pokémon
Height: 0.4 m (1'04")
Weight: 3.1 kg (6.8 lbs)
Interesting Facts: Phione is a blue Pokémon with a round head and a tiny body. Phione's head is crowned by a flotation sac with a long, ribbon-like antenna. Its mouth is small, and its eyes are large with blue sclera and gray irises. Above its eyes are two blue, circular markings connected to the eyes by a thin black line. Its long, flipper-like arms have rounded tips. Phione has a red, oval gem on its chest and a single rudimentary foot spike.

THE PAPER MODEL
Height: 14.6 cm/ 5.7 in
Width: 15.4 cm/ 6.1 in
Depth: 14.0 cm/ 5.5 in
No. of Pages: 3
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES:  The model is pretty easy. Start it at the ponytail and work it down. Close the model at the bottom. Further instructions on the template.

Download: A4 / Letter

DIALGA

483 / Dialga - Pokémon Papercraft
Name: Dialga
Type: Steel/Dragon
Species: Temporal Pokémon
Height: 5.4 m (17'09")
Weight: 683.0 kg (1505.8 lbs)
Interesting Facts: Dialga is a dark blue sauropod-like Pokémon with some gray metallic portions, such as its chestplate, which has a diamond in the center. It also has various light blue stripes. It has a fin-like structure on its back and a crest on its head, resembling a dinosaur. Dialga also has two horns on top of its head, two fang-like horns around its mouth, three spines on the back of its neck, long claws, and a short tail. The wing-like structure on its back can be used to focus the flow of time, as seen in Explorers of Time, Darkness, and Sky. Pokémon Mystery Dungeon: Explorers of Sky: Dialga appears in the main storyline, but mostly as Primal Dialga.

THE PAPER MODEL
Height: 22.3 cm/ 8.8 in
Width: 17.6 cm/ 6.9 in
Depth: 27.9 cm/ 11.0 in
No. of Pages: 9 (10th is optional 2D instead of 3D on page 1)
Level: Medium-Hard
Designer: Brandon & LuIS
Photo: LuIS
NOTES:  Start the model at the head, close at the tip of the tail. This model has a lot of details to glue on the model, like nails, eyebrows, the chest piece and the so called "fan". It's suggested to glue the details as you go, while you can still apply pressure from the inside. The eyebrows and every diamond shape piece is supposed to be built around the front and closed at the back, where there are no tabs, this is more important for the fan, since the back does not close the piece itself, but instead it's glued on the black details on the back of the fan. After these pieces are glued to the black details, glue the front part to the front of the fan. Further instructions on the template.

Download: A4 / Letter

PALKIA

484 / Palkia - Pokémon Papercraft
Name: Palkia
Type: Water/Dragon
Species: Spatial Pokémon
Height: 4.2 m (13'09")
Weight: 336.0 kg (740.8 lbs)
Interesting Facts: Palkia appeared in the first three Diamond & Pearl series Pokémon movies. It was first shown in The Rise of Darkrai, where it fought with Dialga and Darkrai in a battle that nearly destroyed Alamos Town. It was shown in a flashback in Giratina and the Sky Warrior. Palkia's final movie appearance was in Arceus and the Jewel of Life. It was shown for the first time with both the other members of its trio, and started a battle with them which awoke Arceus.

THE PAPER MODEL
Height: 22.7 cm/ 8.9 in
Width: 24.0 cm/ 9.4 in
Depth: 27.3 cm/ 10.7 in
No. of Pages: 12
Level: Hard
Designer: PODragon
Photo: LuIS
NOTES:  Start the model at the head. The fold lines for this part are indicated in blue lines, it's necessary to fold them in order to give the head and neck a proper shape. You can either glue the wings when indicated by numbers or after the arms are glued, use a drop of glue on the side they meet the body. The arms are built from the hands up, you must glue the arm plates before going any further, they need pressure from the inside. The shoulders are simple and there are references on where to glue the shoulder plates. Join the arm and the shoulder BEFORE closing the arm. The arm can be rotated and glued on another position besides the one on the picture. The legs are built from the feet up. I recommend reinforcing them from the inside, so as the middle of the body. The model is closed at the tip of the tail. The stripes must be glued BEFORE closing, while you can apply pressure from the inside, if you follow the numbers you'll be able to do so.

Download: A4 / Letter

UXIE

480 / Uxie - Pokémon Papercraft
Name: Uxie
Type: Psychic
Species: Knowledge Pokémon
Height: 0.3 m (1'00")
Weight: 0.3 kg (0.7 lbs)
Interesting Facts: Uxie appeared in its physical form in The Needs of the Three!, where it, along with Mesprit, came to Lake Valor after Azelf was captured. However, it was also captured by J and Team Galactic, but before it was captured, it used Future Sight with Mesprit, destroying her ship later on. It was then controlled by the team to help fulfill its goal. In The Battle Finale of Legend!, after breaking from their control with the help of Brock's Croagunk and Ash's Gliscor, it helped in stopping Cyrus's plot to use Dialga and Palkia.

THE PAPER MODEL
Height: 15.5 cm/ 6.1 in
Width: 17.6 cm/ 6.9 in
Depth: 16.6 cm/ 6.5 in
No. of Pages: 7
Level: Medium
Designer: LuIS
Photo: LuIS
NOTES:  Start the model with the head. Build the head but don't close it yet, only do so AFTER the helmet is placed. The body starts at the legs, followed by the tails. The tails are the worst part of the body. Join the side pieces together and glue the bottom and top of the tails at them simultaneously. Reinforcing the connection of the body and the tails is important. Continue the body and join the arms BEFORE gluing the head. Glue the spike to the head and after that glue it to the body. Further instructions on the template.

The textures have been updated after building, so that the face texture more closely resembles official art.

Download: A4 / Letter

MESPRIT

481 / Mesprit - Pokémon Papercraft
Name: Mesprit
Type: Psychic
Species: Emotion Pokémon
Height: 0.3 m (1'00")
Weight: 0.3 kg (0.7 lbs)
Interesting Facts: Mesprit is a small, gray, fairy-like Pokémon. It has two tails that each have a red jewel encrusted in them. These are, presumably, two of the jewels which comprise the Red Chain. Mesprit has a partially magenta face with four long, drooping appendages and another red gem encrusted in its forehead. Mesprit's spirit can leave its body without dying and return to the body at will. Legends say that a person that touches it will have their emotions completely drained away. It was shown in The Needs of the Three! and The Battle Finale of Legend! that it can teleport itself, as well as other Pokémon and humans. Though playful, it is a bit mischievous.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 24.9 cm/ 9.8 in
Depth: 15.2 cm/ 6.0 in
No. of Pages: 6 (7 with larger base)
Level: Medium
Designer: LuIS
Photo: LuIS
NOTES:  Start the model with the head. Build the antennae first and build the head starting around them. The body starts at the legs, followed by the tails. The tails are the worst part of the body. Join the side pieces together and glue the bottom and top of the tails at them simultaneously. Reinforcing the connection of the body and the tails is important. Continue the body and join the arms BEFORE gluing the head. Glue the spike to the head and after that glue it to the body. Further instructions on the template. There are two options for bases, the small one and the big one. The big one is supposed to make it stand taller than the other two lake trio members, as shown on the picture with them together. In order to build it print the last page of the template and use color references to put it together.

Download: A4 / Letter

AZELF

482 / Azelf - Pokémon Papercraft
Name: Azelf
Type: Psychic
Species: Willpower Pokémon
Height: 0.3 m (1'00")
Weight: 0.3 kg (0.7 lbs)
Interesting Facts: Azelf is a small, gray-blue, fairy-like Pokémon. It has two tails that each have a red jewel on them. These are, presumably, two of the jewels which complement the Red Chain. Azelf has a partially cyan face with another red gem encrusted into its forehead. Azelf has a cone-shaped head with elf ear-like protrusions on each side. Its spirit can leave its body without dying, and can return to the body at will. It can control an individual's will or enter the body of an individual. Legends say that if Azelf is harmed, it can cause humans to lose all will inside of them, making them completely immobile for all eternity. It was shown in The Needs of the Three! and The Battle Finale of Legend! that it can teleport itself, as well as other Pokémon and humans. Azelf can be very cautious around people and Pokémon. However, if threatened, it will reveal its bold side.

THE PAPER MODEL
Height: 15.5 cm/ 6.1 in
Width: 22.3 cm/ 8.8 in
Depth: 14.6 cm/ 5.7 in
No. of Pages: 5
Level: Medium
Designer: LuIS
Photo: LuIS
NOTES:  Start the model with the head. Build the tip of the head and glue the side details to it before closing. The body starts at the legs, followed by the tails. The tails are the worst part of the body. Join the side pieces together and glue the bottom and top of the tails at them simultaneously. Reinforcing the connection of the body and the tails is important. Continue the body and join the arms BEFORE gluing the head. Glue the spike to the head and after that glue it to the body. Further instructions on the template.

Textures are included for both the smile and normal 'neutral' mouth.

Download: A4 / Letter