DRAGAPULT

887 / DRAGAPULT - Pokémon Papercraft

Name: Dragapult 
Type: Dragon/Ghost 
Species:  Stealth Pokémon
Height: 3.0 m (9'10″)
Weight: 50.0 kg (110.2 lbs.)
Interesting Facts: Dragapult and its evolutionary family are the ghosts of prehistoric aquatic Pokémon. Dragapult carries a pair of Dreepy inside its horns, which it will fire at its opponents like supersonic missiles during battle. It's said that the Dreepy it carries greatly enjoy being sent flying toward opponents at immense speeds. Much of Dragapult's behavior beyond this, however, remains a mystery.

THE PAPER MODEL
Height: 26.6 cm/ 10.5 in
Width: 27.3 cm/ 10.8 in
Depth: 13.7 cm/ 5.4 in
Pages: 10 
Pieces: 101 (+10 for optional Dreepy parts) 
Level: Medium-Hard
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site can be found here!)

NOTES: Build the fins first, then build the head around them, working down. Build the model down and attach the arms as you go. Do NOT build the fingers until the entire model is complete. I originally built the fingers after I attached the arms but they seemed to get in my way and kept falling off when I was building the body and tail. Continue building downward attaching the legs as you go. When you get to piece 67, you have to make the decision on if you want to build the base or get the model to stand by itself. If you want to build the base do not worry, just build the stand and either glue the model to the base, or slightly weight it still to keep it on the base without glue. If you want the model to stand by itself, you can either glue together 2 stacks of 4 quarters together and then glue them to piece 66/67 or you can put in 8 quarters and 2 pennies into the model (not gluing them together or the model) and play with the location of the weights by rotating the model back and forth once the model is closed to get the model to stand by itself. Close the model with the tail then glue the fingers and Dreepys on. Besides that, I hope you enjoy building! 

Download: A4 / Letter

REGIDRAGO CHIBI

895 / REGIDRAGO CHIBI - Pokémon Papercraft
Name: Regidrago (Chibi) 
Type: Dragon
Species: Dragon Orb Pokémon
Height: 2.1 m (6′11″)
Weight: 200.0 kg (440.9 lbs.)
Interesting Facts: Due to its body being formed by crystallized dragon energy, Regidrago is said to have the most powerful Dragon-type moves of all Pokémon. It also has the power of every Dragon-type Pokémon. The energy is said to be the most dense in its central core. According to legend, Regidrago was created by Regigigas using crystallized dragon energy, but it ran out of crystals after building Regidrago's head. It was sealed away in a temple due to the ancient people fearing the destruction it would cause should it ever be completed. It is capable of floating. Regidrago can fire an attack made by intense dragon energy by combining its arms to form a mouth. There's an unproven academic theory that Regidrago's arms were from an ancient dragon.

THE PAPER MODEL
Height: 8.8 cm / 3.5 in
Width: 5.0 cm / 2.0 in
Depth: 10.3 cm / 4.1 in
Pages: 2
Pieces: 24
Level: Easy
Designer: Brandon
Photo: CrafterWong (Site can be found here!)

NOTES: When building this model build each section separately. Many of the pieces (Teeth, Snout) double over on themselves (fold them in half, glue back to back, then they're ready to attach to the next piece). Once everything is made, glue the legs to the main body and when the legs are drying, play with the angle of the head and jaw piece to get the model to stand by itself. When you are happy with how it stands, glue the head and jaw to the body.  Besides that I hope you enjoy building!

 

Download: A4 / Letter

CrafterWong's Site can be found here! 

ZYGARDE

718 / ZYGARDE (50% Forme) - Pokémon Papercraft
Name: Zygarde
Type: Dragon/Ground
Species: Order Pokémon
Height: 5.0 m (16′05″)
Weight: 305.0 kg (672.4 lbs.)
Interesting Facts: Zygarde is a Pokémon whose form depends on the percentage of its Cores and Cells gathered together. Zygarde Core is the brain of Zygarde. It is a small, green Pokémon with a gelatinous body. It has a large, round head with a beak-shaped protrusion on the front, a thin, hook-shaped tail, and a red hexagon suspended in its body. Within its head is a single eye with a black pupil; beside this eye is another white oval that may be a second eye.

THE PAPER MODEL
Height: 21.9 cm / 8.6 in
Width: 21.0 cm / 8.3 in
Depth: 16.9 cm / 6.7 in
Pages: 6
Pieces: 41
Level: Medium
Designer: Brandon
Photo: Photo below by Hunter B via email!

Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Start from the head, work your way back - be careful with the back 'fins' - they're a little thin, and will need to be connected to each other pretty carefully. Once the head and fins are made, it's pretty smooth sailing; just finish the tail, and attach the last 5 pieces to the back of the closed tail. Will likely need weight in the back half of the body/tail to counterbalance the head properly as well. 

Download: A4 / Letter

APPLIN

840 / APPLIN - Pokémon Papercraft
Name: Applin
Type: Grass/Dragon
Species: Apple Core Pokémon
Height: 0.2 m (0′08″)
Weight: 0.5 kg (1.1 lbs.)
Interesting Facts: Applin is both the lightest and shortest Dragon-type Pokémon. As soon as it's born, it burrows into an apple, which serves as a home, food source, and protection against preying bird Pokémon. The flavor of the apple determines which evolution Applin will evolve into.

THE PAPER MODEL
Height: 17.2 cm / 6.8 in
Width: 11.6 cm / 4.6 in
Depth: 18.4 cm / 7.2 in
Pages: 4
Pieces: 32
Level: Easy
Designer: Brandon
Photo: Photo below sent in by Kara via email!  

Feel free to submit your own at our email and we'll display the best/most creative!

NOTES: Everyone likes apples for Halloween candy, right? Haha. Much contrasting Golisopod, this one is pretty easy. Just build from the eyes down, attaching the tail when you can, and close at the bottom of the apple. Very direct, luckily.  

 

Download: A4 / Letter

LATIOS V2

381 / LATIOS v2 - Pokémon Papercraft
Name: Latios
Type: Dragon/Psychic
Species: Eon Pokémon
Height: 2.0 m (6′07″)
Weight: 60.0 kg (132.3 lbs.)
Interesting Facts: Latios is a Pokémon with a birdlike body stylized after a plane. Its body flows slowly into a thick neck, giving it a bulky appearance. It has no legs, usually floating instead. Most of its body is blue, with white areas near its arms and a white stripe on its back that extend up to its head. Jet-plane wings sit on top of its back, while two tall, jagged fins point behind it from its rear. A red triangle marks the center of its chest, while a blue mask partially covers its face.

THE PAPER MODEL
Height: 16.5 cm / 6.5 in
Width: 19.5 cm / 7.7 in
Depth: 23.9 cm / 9.4 in
Pages: 5
Pieces: 70
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Start from the head, work your way back - be extra careful attaching the arms and the wings, especially since they're pretty close to each other. Close at the butt,  ending on piece 68. 69-70 are an optional base, but will certainly help it stay on a sort of pedestal. 

Download: A4 / Letter

HAXORUS

612 / HAXORUS - Pokémon Papercraft
Name: Haxorus
Type: Dragon
Species: Axe Jaw Pokémon
Height: 1.8 m (5′11″)
Weight: 105.5 kg (232.6 lbs.)
Interesting Facts: Haxorus is a bipedal Pokémon with a dark yellow-green covering on its back and most of the front. It has black skin covering its torso, tail tip, and thighs, as well as red talons and claws. Its large tusks, which resemble scythes, are black and edged in red, and are located on its upper jaw on the side of its mouth. These tusks, which can cut steel beams, are unbreakable. Its medium-sized eyes are red with black pupils. Ridged plate-like skin travels from its back to its head region. It has solid armor and the legs and tail have a dividing line pattern.

THE PAPER MODEL
Height: 17,7 cm / 7.0 in
Width: 17.7 cm / 7.0 in
Depth: 31.9 cm / 12.6 in
Pages: 6
Pieces: 65
Level: Medium
Designer: Brandon
Photo: Shiny Photo provided by Bitong via email! Regular pic received from Oceane L via email! 
NOTES: Relatively straight forward one, with a bit of slotting pieces together. Follow the numbers, starting at the head and working down. All of the separated pieces have numbers noting where they match up (3 to 3, 4 to 4, etc). Might need a bit of weight in the feet to help stand, since the tail is pretty extensive. 

Download: A4 / Letter

MEGA RAYQUAZA

384 / MEGA RAYQUAZA- Pokémon Papercraft
Name: Mega Rayquaza
Type: Dragon/Flying
Species: Sky High Pokémon
Height: 10.8 m (35′05″)
Weight: 392.0 kg (864.2 lbs.)
Interesting Facts: In Hoopa and the Clash of Ages, a Shiny Rayquaza capable of Mega Evolving was summoned alongside Latios and Latias by Hoopa to protect it from the shadow Hoopa Unbound. The trio protected Hoopa from the shadow Hoopa and its reinforcements, Primal Groudon, Primal Kyogre, Dialga, Palkia, Giratina, and Kyurem, in Dahara City. Eventually, the battle ended after the shadow Hoopa was sealed in a Prison Bottle, and Rayquaza departed for its home. 

THE PAPER MODEL
Height: 24.9 cm / 9.8 in
Width: 16.1 cm / 6.3 in
Depth: 31.5 cm / 12.4 in (due to various long ribbons)
Pages: 9, +2 for instructions/reference
Pieces: 128
Level: Hard
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative! 

            This one was sent in by Lance via our email! 
NOTES: Various instructions included on template, along with numbers. Definitely follow the numbers and work your way from the head down. The body segments work exactly the same as our regular Rayquaza model (with a little more detail)- match up the number, and everything flows well together. The fins and 'ribbon' segments might be the most difficult part to connect just right, and using a reference (such as the Official Art picture on the last page of the model) to see how everything connects should help. Putting wire inside the 'ribbons' (the last few pages) can help with getting them to pose just right as well.  Definitely no need to print the last 2 pages, as those are all instructions and reference. Overall this is a fairly tough model, and you should take your time building it to get things just right, especially with the smaller parts. PDO reference, if possible, is extremely helpful.

Download: A4 / Letter

DEINO

633 / DEINO- Pokémon Papercraft
Name: Deino
Type: Dark/Dragon
Species: Irate Pokémon
Height: 0.8 m (2′07″)
Weight: 17.3 kg (38.1 lbs.)
Interesting Facts: Deino is a small blue quadrupedal Pokémon with black fur covering its head and neck, concealing everything but its mouth from view. The fur around the neck appears to be bruised and the tail to be bitten off. As it is blind, it will bite at and eat anything that moves, and it has the vigor and energy to bite constantly and without stopping, so precautions must be taken before aproaching a Deino. It primarily lives in caves with abundant water sources.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 8.6 cm / 3.3 in
Depth: 14.4cm / 5.6 in
Pages: 3
Pieces: 37
Level: Medium/Hard
Designer: Brandon
Photo: LuIS
NOTES: Start at the indicated spots, follow the numbers and glue both parts once they are built. It is a tricky model, needs folding to get a good shape, lightly fold the indicated lines and parts. It needs weight to stand, add it to the body. Further instructions and numbers on the .pdo.

Download: A4 / Letter

MEGA CHARIZARD X

006 / M-CHARIZARD X - Pokémon Papercraft
Name: Mega Charizard X
Type: Fire/Dragon
Species: Flame Pokémon
Height: 1.7 m (5'07")
Weight: 110.5 kg (243.6 lbs.)
Interesting Facts: As Mega Charizard X, its body and legs appear more physically fit, though its arms remain thin. Its skin turns black with a sky blue underside extending from the lower jaw to the tip of the tail. Two spikes with blue tips curve upward from the front and back of each shoulder, while the tips of its horns sharpen, turn blue, and curve slightly upward. Its brow and claws are larger, its snout is shorter, and its eyes are now red with white pupils. It has two small, fin-like spikes under each horn and two more down its lower neck. The lower trims of its wings are divided into large, rounded points and each third joint is adorned with a claw-like spike. Mega Charizard X breathes blue flames out the sides of its mouth, and the flame on its tail now burns blue with increased heat.

THE PAPER MODEL
Height: 22.0 cm/7.8 in
Width: 33.1 cm/ 6.2 in
Depth: 28.2 cm/4.4 in
No. of Pages: 9
No. of Pieces: 102
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: Instructions included in the files, along with a couple additional images for a short example.

Download: A4 / Letter

MEGA LATIOS

381 / M Latios - Pokémon Papercraft
Name: M Latios
Type: Dragon/Psychic
Species:  Eon Pokémon
Height: 2.3 m (7'07")
Weight: 70.0 kg (154.3 lbs.)
Interesting Facts: Latios made its debut appearance in Pokémon Heroes. Annie and Oakley captured Latios and used it to power the Defense Mechanism of Alto Mare along with the stolen Soul Dew. Latios ended up sacrificing itself to save Alto Mare from an enormous tidal wave.

THE PAPER MODEL
Height: 16.0 cm/6.3 in
Width: 44.8 cm/17.6 in
Depth: 28.9 cm/11.4 in
No. of Pages: 10 (Including Base)
No. of Pieces: 71
Level: Medium
Designer: Brandon
Photo: LuIS

NOTES: Start at the head and build by numbers until you get to the tail, glue the arms (using the base as a tool to glue them on the right position) and only after close. It's important to note that the arms are very heavy and the tube that holds them to the body is very small, so it may collapse if not reinforced with a tube of rolled paper inserted inside. The is not as hard as it seems, take your time, join one at a time to the hand and you'll be fine. The medium-hard for Mega Latias is due to the hands, the pieces get small, and a bit harder to build, but besides that shouldn't be too hard. Further instructions included on the template.

Base, Soul Dew, and Mega Stones included, as well as eye textures for Latias. The only difference for Latias is eye, and size.

Download: A4 / Letter

MEGA LATIAS

380 / M Latias - Pokémon Papercraft
Name: M Latias
Type: Dragon/Psychic
Species:  Eon Pokémon
Height: 1.8 m (5'11")
Weight: 52.0 kg (114.6 lbs.)
Interesting Facts: A Latias also appeared in Pikachu's Ocean Adventure where, along with Latios, it used its powers to help Pikachu, Meowth, and the other Pokémon search for the legendary "Wailord's Tear" beneath the ocean. A Latias appeared in SS025 under the ownership of Nurse Joy. It was used against Forrest's Rhyperior in a battle to prove Forrest's capabilities as a potential Gym Leader, where Latias proved victorious.

THE PAPER MODEL
Height: 12.5 cm/4.9 in
Width: 35.0 cm/13.8 in
Depth: 22.6 cm/8.9 in
No. of Pages: 6 (Including Base)
No. of Pieces: 71
Level: Medium-Hard
Designer: Brandon
Photo: LuIS

NOTES: Start at the head and build by numbers until you get to the tail, glue the arms (using the base as a tool to glue them on the right position) and only after close. It's important to note that the arms are very heavy and the tube that holds them to the body is very small, so it may collapse if not reinforced with a tube of rolled paper inserted inside. The is not as hard as it seems, take your time, join one at a time to the hand and you'll be fine. The medium-hard for Mega Latias is due to the hands, the pieces get small, and a bit harder to build, but besides that shouldn't be too hard. Further instructions included on the template.

Base, Soul Dew, and Mega Stones included, as well as eye textures for Latias. The only difference for Latias is eye, and size.

Download: A4 / Letter

DRAGONITE V2

149 / DRAGONITE V2 - Pokémon Papercraft
Name: Dragonite
Type: Dragon/Flying
Species: Dragon Pokémon
Height: 2.2 m (7'03")
Weight: 210.0 kg (463.0 lbs.)
Interesting Facts: Dragonite is a draconic, bipedal Pokémon with light orange skin. It has large, gray eyes and a round snout with small nostrils. There is a pair of long, thin antennae, as well as a small horn on the top of its head. Its striated underbelly is cream-colored, and extends to the tip of its long, tapering tail. It has thick arms and legs ending in three claws each. Its leg joints are well defined, while its arms have a smooth, rounded appearance. Dragonite's wings are small relative to its body, with teal wing membranes.

THE PAPER MODEL
Height: 14.0 cm/5.5 in
Width: 12.5 cm/4.9 in
Depth: 20.6 cm/8.1 in
No. of Pages: 4
No. of Pieces: 67
Level: Medium-Easy
Designer: PODragon
Photo: LuIS
NOTES: This model is pretty simple. Start at the head and build down. The antenaes can be tricky, just take you time and use tweezers. Close at the tip of the tail. Further instructions included on the template.

Download: A4 / Letter

DIALGA

483 / Dialga - Pokémon Papercraft
Name: Dialga
Type: Steel/Dragon
Species: Temporal Pokémon
Height: 5.4 m (17'09")
Weight: 683.0 kg (1505.8 lbs)
Interesting Facts: Dialga is a dark blue sauropod-like Pokémon with some gray metallic portions, such as its chestplate, which has a diamond in the center. It also has various light blue stripes. It has a fin-like structure on its back and a crest on its head, resembling a dinosaur. Dialga also has two horns on top of its head, two fang-like horns around its mouth, three spines on the back of its neck, long claws, and a short tail. The wing-like structure on its back can be used to focus the flow of time, as seen in Explorers of Time, Darkness, and Sky. Pokémon Mystery Dungeon: Explorers of Sky: Dialga appears in the main storyline, but mostly as Primal Dialga.

THE PAPER MODEL
Height: 22.3 cm/ 8.8 in
Width: 17.6 cm/ 6.9 in
Depth: 27.9 cm/ 11.0 in
No. of Pages: 9 (10th is optional 2D instead of 3D on page 1)
Level: Medium-Hard
Designer: Brandon & LuIS
Photo: LuIS
NOTES:  Start the model at the head, close at the tip of the tail. This model has a lot of details to glue on the model, like nails, eyebrows, the chest piece and the so called "fan". It's suggested to glue the details as you go, while you can still apply pressure from the inside. The eyebrows and every diamond shape piece is supposed to be built around the front and closed at the back, where there are no tabs, this is more important for the fan, since the back does not close the piece itself, but instead it's glued on the black details on the back of the fan. After these pieces are glued to the black details, glue the front part to the front of the fan. Further instructions on the template.

Download: A4 / Letter

PALKIA

484 / Palkia - Pokémon Papercraft
Name: Palkia
Type: Water/Dragon
Species: Spatial Pokémon
Height: 4.2 m (13'09")
Weight: 336.0 kg (740.8 lbs)
Interesting Facts: Palkia appeared in the first three Diamond & Pearl series Pokémon movies. It was first shown in The Rise of Darkrai, where it fought with Dialga and Darkrai in a battle that nearly destroyed Alamos Town. It was shown in a flashback in Giratina and the Sky Warrior. Palkia's final movie appearance was in Arceus and the Jewel of Life. It was shown for the first time with both the other members of its trio, and started a battle with them which awoke Arceus.

THE PAPER MODEL
Height: 22.7 cm/ 8.9 in
Width: 24.0 cm/ 9.4 in
Depth: 27.3 cm/ 10.7 in
No. of Pages: 12
Level: Hard
Designer: PODragon
Photo: LuIS
NOTES:  Start the model at the head. The fold lines for this part are indicated in blue lines, it's necessary to fold them in order to give the head and neck a proper shape. You can either glue the wings when indicated by numbers or after the arms are glued, use a drop of glue on the side they meet the body. The arms are built from the hands up, you must glue the arm plates before going any further, they need pressure from the inside. The shoulders are simple and there are references on where to glue the shoulder plates. Join the arm and the shoulder BEFORE closing the arm. The arm can be rotated and glued on another position besides the one on the picture. The legs are built from the feet up. I recommend reinforcing them from the inside, so as the middle of the body. The model is closed at the tip of the tail. The stripes must be glued BEFORE closing, while you can apply pressure from the inside, if you follow the numbers you'll be able to do so.

Download: A4 / Letter

GOOMY (Happy Halloween!)

704 / Goomy - Pokémon Papercraft
Name: Goomy
Type: Dragon
Species: Soft Tissue Pokémon
Height: 0.3 m (1'00")
Weight: 2.8 kg (6.2 lbs)
Interesting Facts: Goomy is widely considered the weakest Dragon-type Pokémon. It hides in damp and shady places, such as swamps, to prevent its slimy body from drying out.

THE PAPER MODEL
Height: 13.5 cm/ 5.3 in
Width: 11.1 cm/ 4.4 in
Depth: 15.5 cm/ 6.1 in
No. of Pages: 3
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES:  Use a pen or pencil to curl the body pieces to give it a round shape. Start at the top of the head. Be careful with the antennae, they're the hardest part of the model. Glue the antennae before closing at the bottom.

Download: A4 / Letter

DRUDDIGON

621 / Druddigon - Pokémon Papercraft
Name: Druddigon
Type: Dragon
Species: Cave Pokémon
Height: 1.6 m (5'03")
Weight: 139.0 kg (306.4 lbs)
Interesting Facts: Druddigon's bright red head is very hard, being harder than rock and very rough. It can take in sunlight with its wings; if its body temperature lowers, it becomes immobile. It has savage physical strength.

THE PAPER MODEL
Height: 19.0 cm/ 7.5 in
Width: 21.3 cm/ 8.4 in
Depth: 23.2 cm/ 9.1 in
No. of Pages: 6
Level: Hard
Designer: Brandon
Photo: LuIS
NOTES: The model is built into two segments: head and body. Start the head at the top and close at the bottom. Be carefull, it's the hardest part of the model. The mouth connection can be tricky too. The body starts at the tail and close at the neck. Glue the spikes as you go. The wings are tricky too, instructions on how to build them (and some other instructions too) are included on the template. Before closing, glue the wings to the body and add some weight untill it stands.

Download: A4 / Letter

GABITE

444 / Gabite - Pokémon Papercraft
Name: Gabite
Type: Dragon/Ground
Species: Cave Pokémon
Height: 1.4 m (4'07")
Weight: 56.0 kg (123.5 lbs)
Interesting Facts: Gabite are fierce and predatory dragons, known for their scales that have medicinal properties and can heal most illnesses. Gabite have short, yet deadly sharp teeth, like their pre-evolution, Gible. They have been known to move at extreme speeds.

THE PAPER MODEL
Height: 17.5 cm/ 6.9 in
Width: 16.9 cm/ 6.7 in
Depth: 19.9 cm/ 7.8 in
No. of Pages: 4
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start at the top of the head, close at the foot, following the numbers. Attach the jets on the head whenever possible, as well as claws as you go.

Download: A4 / Letter

DRATINI V2

147 / DRATINI v2- Pokémon Papercraft
Name: Dratini
Type: Dragon
Species: Dragon Pokémon
Height: 1.8 m (5'11")
Weight: 3.3 kg (7.3 lbs)
Interesting Facts: Dratini are timid, elusive, and extremely shy Pokémon, and thus are rarely seen, resulting in the belief that they are mythological among certain communities in Kanto.

THE PAPER MODEL
Height: 14.5 cm/ 5.7 in
Width: 10.8 cm/ 4.3 in
Depth: 16.1 cm/ 6.3 in
No. of Pages: 2
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the head and close at the tail. Be careful with the head wings, and attach them before continuing past the head. Further instructions on the template.

Download: A4 / Letter

GARCHOMP

445 / GARCHOMP - Pokémon Papercraft

Name: Garchomp
Type: Dragon/Ground
Species: Mach Pokémon
Height: 1.9 m (6′03″)
Weight: 95.0 kg (209.4 lbs.)
Interesting Facts: Garchomp are dark blue, with a red underbelly that covers from the middle of its abdomen, to its jaws, and then to the undersides of its arms. Underneath the red is a gold diamond shape as well a gold cross on its snout; which gives Garchomp a close resemblance to Sharpedo, with close to the same body color as it. Garchomp have appendages that resemble jets, planes and hammerhead sharks; its four fins, one on each arm, one dorsal fin and another on its tail that resembles a shark tailfin; horns that resemble jet/plane engines rest on its head, resembling a hammerhead. It has spikes on its hind limbs and arms as well as sharper claws than its previous evolution. Its eyes have black scleras and gold-colored irises. Its pupils have shrunk.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 20.8 cm/ 8.2 in
Depth: 25.8 cm/ 10.2 in
Pages: 5
Pieces: 94
Level: Hard
Designer: Brandon
Photo: Carnilmo
NOTES: Build from head down, attaching teeth, arms, and fins as possible. Further notes included. It's a tough model, so if you're just starting out try something else as a warm up.

Download: A4 / Letter

ZEKROM

644 / ZEKROM - Pokémon Papercraft

Name: Zekrom
Type: Dragon/Electric
Species: Deep Black Pokémon
Height: 2.9 m (9′06″)
Weight: 345.0 kg (760.6 lbs.)
Interesting Facts: Zekrom is a bipedal Pokémon of dragon- and dinosaur-like basis. Zekrom is mainly a shade of dark gray, with darker patches on various portions of its body. It has red eyes (although in some scenes its eyes are depicted as having white irises and red sclera) and a small horn-like protrusion on the tip of its snout, with its head sporting a plume tipped with light-blue coloration. At the base of its neck is a black, stud-like feature, and atop its shoulders are similar, larger features resembling armor padding. The bases of its wings also have such padding, and a fanned, splayed, seemingly webbed shape with a small "wing-spike" on one edge. The lower length of Zekrom's arms extenuate into splayed, seemingly webbed, somewhat baseball-mitt-like formations, with three-clawed, dark-colored hands on the undersides. The front portion of Zekrom's waist is black-colored, with its belly and thighs having thin striations down their length. Its knees are black, as are the foremost parts of its three-clawed feet and spiked heels. Zekrom's tail consists of large, round, conical and spiked formation, likened to an electricity generator, with a black inner portion and bands on the tip of the outside portion.

THE PAPER MODEL
Height: 28.6 cm/ 11.3 in
Width: 27.2 cm/ 10.7 in
Depth: 35.7 cm/ 14.1 in
Pages: 11
Pieces: 145
Level: Hard
Designer: Brandon
Photo: Skeleman
NOTES: Build from the head down. Be careful with the wings, shoulders, and hands, attaching limbs as you go. Attach the legs before moving to the tail, and close at the tip of the tail. Base included, as model is quite tail heavy. This is a difficult model, do not attempt without considerable experience.

Download: A4 / Letter