DRAGAPULT

887 / DRAGAPULT - Pokémon Papercraft

Name: Dragapult 
Type: Dragon/Ghost 
Species:  Stealth Pokémon
Height: 3.0 m (9'10″)
Weight: 50.0 kg (110.2 lbs.)
Interesting Facts: Dragapult and its evolutionary family are the ghosts of prehistoric aquatic Pokémon. Dragapult carries a pair of Dreepy inside its horns, which it will fire at its opponents like supersonic missiles during battle. It's said that the Dreepy it carries greatly enjoy being sent flying toward opponents at immense speeds. Much of Dragapult's behavior beyond this, however, remains a mystery.

THE PAPER MODEL
Height: 26.6 cm/ 10.5 in
Width: 27.3 cm/ 10.8 in
Depth: 13.7 cm/ 5.4 in
Pages: 10 
Pieces: 101 (+10 for optional Dreepy parts) 
Level: Medium-Hard
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site can be found here!)

NOTES: Build the fins first, then build the head around them, working down. Build the model down and attach the arms as you go. Do NOT build the fingers until the entire model is complete. I originally built the fingers after I attached the arms but they seemed to get in my way and kept falling off when I was building the body and tail. Continue building downward attaching the legs as you go. When you get to piece 67, you have to make the decision on if you want to build the base or get the model to stand by itself. If you want to build the base do not worry, just build the stand and either glue the model to the base, or slightly weight it still to keep it on the base without glue. If you want the model to stand by itself, you can either glue together 2 stacks of 4 quarters together and then glue them to piece 66/67 or you can put in 8 quarters and 2 pennies into the model (not gluing them together or the model) and play with the location of the weights by rotating the model back and forth once the model is closed to get the model to stand by itself. Close the model with the tail then glue the fingers and Dreepys on. Besides that, I hope you enjoy building! 

Download: A4 / Letter

CHANDELURE (Halloween Finale!)

609 / CHANDELURE- Pokémon Papercraft
Name: Chandelure
Type: Ghost/Fire
Species: Luring Pokémon
Height: 1.0 m (3′03″)
Weight: 34.3 kg (75.6 lbs.)
Interesting Facts: Chandelure is a Pokémon that resembles a sentient chandelier. It has a striped, round head, and round, pupil-less yellow eyes. There is a ring of small, black spikes on top of its head with a tall, purple flame in the middle. From a black spike below its head, black arms curl upward. These arms are tipped with purple fire. Chandelure's fires do not burn its victims physically, instead burning their spirit. After hypnotizing its opponent by waving these flames, it absorbs the victim's spirit.

THE PAPER MODEL
Height: 18.7 cm / 7.4 in
Width: 7.8 cm / 3.1 in
Depth: 19.0 cm / 7.5 in
Pages: 6
Pieces: 52
Level: Hard
Designer: Brandon
Photo: CrafterWong (including the chibi Chandelure shown, which can be found here!)

NOTES: When building the head, do not close the model (Piece 15) until you have attached the black lattices (Pieces 18-30) to the base of the flame and the eyes in the desired spots. A screenshot has been included to show how these are placed as well. The arms are the hardest part to build. I would recommend building the swirl of the curvy part and flames (pieces 31-35, 40-44) first and attach them together. I would then build the arms starting with the tube closest to the end of the arm that was just built and end with the tube that connects to the body. Pieces have been numbered to indicate this as well. CrafterWong was able to get away with only having to build the build stand and strategically placing the arms to support the weight of the body- but additional bases (49, 50) have been included to help if needed as well. 

 

Download: A4 / Letter

Chandelure Chibi by CrafterWong can be found here as well! 

LAMPENT (Halloween Part 2!)

608 / LAMPENT - Pokémon Papercraft
Name: Lampent
Type: Ghost/Fire
Species: Lamp Pokémon
Height: 0.6 m (2′00″)
Weight: 13.0 kg (28.7 lbs.)
Interesting Facts: Lampent can sense when someone is about to die, whom it visits and steals the spirit from the person's body. Though most often found in deep forests, it wanders through cities and hangs around near hospitals to absorb the spirits of the fallen. It uses the spirits it has absorbed to fuel its fire. On occasion, it has been known to work with Litwick to lead people to the Ghost World while stealing life energy.

THE PAPER MODEL
Height: 15.3 cm / 6.0 in
Width: 13.2 cm / 5.2 in
Depth: 17.1 cm / 6.7 in
Pages: 6 (5+base)
Pieces: 19
Level: Easy/Medium
Designer: Brandon
Photo: CrafterWong (including the chibi Lampent shown, which can be found here!)

NOTES: The model can stand by itself without having to build any supports, but a base is included on the last page just in case - if you want to skip the base, just skip the last page. The only thing I recommend is to glue another sheet of scratch paper inside the model in order to give the arms a little extra support. The arms are the only difficult thing here, so just be sure they're stable and properly enforced when attaching them. 

The face texture was lightened up significantly after the build as well, to give it a better contrast than pictured. 

 

Download: A4 / Letter

Lampent Chibi by CrafterWong can be found here as well! 

LITWICK (Happy Halloween part 1!)

607 / LITWICK - Pokémon Papercraft
Name: Litwick
Type: Ghost/Fire
Species: Candle Pokémon
Height: 0.3 m (1′00″)
Weight: 3.1 kg (6.8 lbs.)
Interesting Facts: Litwick is a small, candle-like Pokémon with a purple flame atop its head, which is powered by life energy that it absorbs. Its body and two stubby arms are made primarily out of white wax. The folded, melted wax lays over its right eye, and leaves only the bright yellow left eye visible. It has a small smile under a protruding upper lip. Litwick pretends to guide people and Pokémon around by illuminating darkened areas. However, it is actually sucking away their life energy and leading them to the Ghost World.

THE PAPER MODEL
Height: 11.4 cm / 4.5 in
Width: 6.1 cm / 2.4 in
Depth: 6.6 cm / 2.6 in
Pages: 2
Pieces: 24
Level: Easy
Designer: Brandon
Photo: CrafterWong (including the chibi Litwick shown, which can be found here!)

NOTES: Build from the top down. Before attaching the last bottom piece, glue the head piece and then the flame to the desired position and then attach the last piece that does not have tabs.  

 

Download: A4 / Letter

Litwick Chibi by CrafterWong can be found here as well! 

HONEDGE

679 / HONEDGE - Pokémon Papercraft
Name: Honedge
Type: Steel/Ghost
Species: Sword Pokémon
Height: 0.8 m (2′07″)
Weight: 2.0 kg (4.4 lbs.)
Interesting Facts: Honedge is a Pokémon that resembles a sword from the medieval times. Honedge's appearance sheathed is dark brown with curved lines across its surface, and unsheathed is a silver sword, with a gem that appears to be its eye engraved on its hilt. Attached to the pommel is a long, dark blue cloth with a swirl design in lighter blue at its four-split end. The sash is known to suck out the life energy of anyone who dares to grab it by the hilt.

THE PAPER MODEL
Height: 25.9 cm / 10.2 in
Width: 13.1 cm / 5.2 in
Depth: 24.0 cm / 9.5 in
Pages: 4
Pieces: 35
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: This one is composed of many parts, and you'll definitelly need the .pdo to assemble it. For the stealth, first build the inside, from the bottom up, when you get to the top, start building the outside from the top down. In order to glue the lower part of the stealth, you'll need to glue the tabs of the last part of the inside and the outside together, there's a picture on the packs as reference, after that build the rest of the stealth. The sword is pretty simple, start at the tip and build to the top, glue the hinge once it is done. The circular part is tedious, but not hard, just take your time with each tab and you'll be fine. Also, cut it carefully, it's very easy to tear. Glue the tabs of the ribbon to the inside of the blue "button" and reinforce it. You can use a pen to round the ribbon a bit and give it some shape. The sword can be placed inside the stealth and taken off.

Download: A4 / Letter

MIMIKYU - Happy Halloween!

778 / MIMIKYU - Pokémon Papercraft
Name: Mimikyu
Type: Ghost/Fairy
Species: Disguise Pokémon
Height: 0.2 m (0′08″)
Weight: 0.7 kg (1.5 lbs.)
Interesting Facts: Mimikyu is a Pokémon whose body is almost entirely hidden under a veil. Its black eyes are visible through holes in the body of its disguise, and the fringe of an amorphous foot or lower body appears to be visible under the hem of its veil. It can extend a black appendage from under its veil. The veil resembles a Pikachu. The cloth is yellow with black tipped ears and the Pikachu face seems to be drawn with crayons. It also carries a small stick that looks like Pikachu's tail. It is always covered by the disguise, rumored because it is weakened by sunlight, so it uses the disguise as protection. It is believed that seeing it's true form can cause a mysterious illness. Mimikyu's disguise is modelled after Pikachu because of the popularity of Pikachu-styled merchandise. This lonely Pokémon thought that this disguise would allow it to make friends with people.

THE PAPER MODEL
Height: 17.0 cm / 6.7 in
Width: 16.3 cm / 6.4 in
Depth: 25.6 cm / 10.0 in
Pages: 4 (5 with the optional hand)
Pieces: 34 (+2 for optional hand)
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the top of the head and close at the bottom of the body, at the bottom of the cloth. Make sure to lightly fold all the lines on both pieces of the bottom of the cloth. Build the foot starting from the top and closing at the bottom. After both parts closed, glue them together. Build the tail starting from the top and closing at the bottom. Cut a little hole on the base of the cloth and put the tail through it, gluing it at the foot. The shadow hand is optional, to glue it just cut a line on the bottom of the cloth and glue it to the foot.

Download: A4 / Letter

MEGA GENGAR - HAPPY HALLOWEEN!

094 / Mega Gengar - Pokémon Papercraft
Name: Mega Gengar
Type: Ghost/Poison
Species: Shadow Pokémon
Height: 1.4 m (4′07″)
Weight: 40.5 kg (89.3 lbs.)
Interesting Facts: When Gengar mega evolves a part of its body sinks into the body. It gets a reddish purple color on the lower portions and a third eye appears on the forehead, which is yellow and allows it to see into other dimensions. The spikes on the back get more numerous and pointy, they also appear on the hands and tail. Mega Gengar has the highest base Special Attack stat of any Poison and Ghost Pokémon. It also has the highest base Speed stat of all Ghost Pokémon and the highest base stat total of all non-legendary Ghost Pokémon.

THE PAPER MODEL
Height: 15.0 cm / 5.9 in
Width: 22.7 cm / 8.9 in
Depth: 19.7 cm / 7.7 in
Pages: 6
Pieces: 86
Level: Medium-Hard
Designer: LuIS
Photo: LuIS
NOTES: Start the model at the spikes at the top of the forehead. Make sure to add the detail at the forehead and the spikes when the numbers get to them. The spikes are repetitive, but easy to build. I also added some reference pictures on the download pack to help glue them on the right place. Close the model at the bottom of the body. The hands are the hard part of the model, take your time with them, follow the numbers and the instructions and you'll be fine. Start them at the middle and build the spikes around it, there are some colored tabs and suggested fold lines on the .pdo to help. Close them at the bottom and glue to the arms. Further instructions added on the template.

Download: A4 / Letter

MEGA SABLEYE

302 / MEGA SABLEYE - Pokémon Papercraft

Name: Sableye (Mega)
Type: Dark/Ghost
Species: Darkness Pokémon
Height: 0.5 m (1'08")
Weight: 11.0 kg (24.3 lbs.)
Interesting Facts: As Mega Sableye, all the energy from its Mega Evolution is concentrated into the red jewel on its chest, causing it to detach from Sableye's body and significantly increase in size; the detached jewel leaves a small hole in Mega Sableye's chest. Its ears elongate, and it gains a spike on the top of its head. Its teeth turn from white to yellow, and its eyes also change from pale blue to a crimson red, with diagonal slits at their inner edges. The enlarged jewel is said to boast such incredible hardness that no attack can even leave a scratch on it. During battle, Mega Sableye shelters itself behind the jewel, from where it can take advantage of any openings its target leaves exposed.

THE PAPER MODEL
Height: 19.0 cm / 7.48 in
Width: 17.6 cm / 6.93 in
Depth: 15.4 cm / x.x in
Pages: 5
Pieces: 58
Level: Medium
Designer: Olber
Photo: Olber
NOTES: This model is pretty simple to build. Just refer to pdo file to get more orientation. Start at the main spike on its head, then the ears. Build the head top making your way down; attach the ears in the progress. Fold the jewel pieces in order to get well shaped jewels. Glue them before you attach the legs. By the way, you got to attach the legs before closing the model at the "close here" piece. To get the giant jewel sticked to Sableye, use a drop of glue in the rigth arm first finger. Laying the model face up may be useful, in order you let the glue dry. When it's full dried, make it stand and place it correctly.

Download: A4 / Letter

HOOPA CONFINED FORM

720 / HOOPA - Pokémon Papercraft
Name: Hoopa (Confined Form)
Type: Psychic/Ghost
Species: Mischief Pokémon
Height: 0.5 m (1′08″)
Weight: 9 kg (19.8 lbs.)
Interesting Facts: Hoopa Confined is a light purple Pokémon with several pink markings. There is a v-shaped marking on its chest and bands around its wrists. Additionally, there are pink markings around its head and a growth on top resembling hair tied into a ponytail. There is a yellow, ring marking in the center of its forehead, and it has green eyes with yellow sclera. On either side of its head is a dark gray horn that curves slightly upward. Hoopa has three gold rings: one large one around its lower body and one hanging freely on each of its horns. Its arms are not attached to its body and float next to it. Each arm has a small golden spike on one end and a hand similar to a mitten on the other. There is a golden spike on each shoulder, which is similar to those on its arms. Hoopa's lower body consists only of a wispy structure similar to its ponytail.

THE PAPER MODEL
Height: 19.2 cm / 7.7 in
Width: 19.8 cm / 7.7 in
Depth: 19.6 cm / 7.6 in
Pages: 8
Pieces: 59
Level: Medium
Designer: Olber
Photo: Olber
NOTES: This model is easy to build. The rings are a little tricky so you got to be patient.Start from the head, or from the horns. But build them seperately. Once you have the horns done, then attach them to the head. You can glue the arms to the body or not, it's up to you. Also, Hoppa doesn't stand by itself, and the pack doesn't include a base. You can build an extra ring and glue it to the bottom of the model in order it can stand, as you can see in the picture. Good Luck ;)

Download: A4 / Letter

GOURGEIST

711 / GOURGEIST (Super) - Pokémon Papercraft
Name: Gourgeist
Type: Ghost/Grass
Species: Pumpkin Pokémon
Height: 1.7 m (5'07")
Weight: 39.0 kg (86.0 lbs.)
Interesting Facts: Gourgeist are malevolent Pokémon that catch their prey in their hairlike arms and take delight in their victims' suffering. On moonless nights, they are known to wander through town streets, singing an eerie song that curses its unfortunate listeners. It and its pre-evolution, Pumpkaboo, are the only known Pokémon that can learn Trick-or-Treat.

THE PAPER MODEL
Height: 19.9 cm/7.8 in
Width: 12.7 cm/5.0 in
Depth: 14.0 cm/5.5 in
No. of Pages: 5
No. of Pieces: 58
Level: Medium-Hard
Designer: Brandon
Photo: Brandon

NOTES: Start from the bottom up, closing the 'gourd' at the top, and doing the same with the arms. Build the arms from fingertip to top, being especially careful with connecting the fingers. Once the arms and bottom of the hair are done, connect them, being sure to hold the pieces together for a bit to get a strong connection. The next part is the trickiest, and most difficult- connecting the top of the hair onto the rest. Be sure to have something you can maneuver with like a scissor blade, pencil, or anything small and able to fit inside the piece. Use it to hold the tabs in place while gluing. Piece 56 is only advised if you're having trouble getting the hair to fit on the body.
Glue the hair by the back (pieces 49, 52, 53), being sure to position it to cover one eye and not the other. Will need a small wedge underneath the back to stand, or a little something to weigh it toward the front more.

Download: A4 / Letter

AEGISLASH (Shield)

681 / AEGISLASH (Shield) - Pokémon Papercraft
Name: Aegislash
Type: Steel/Ghost
Species: Royal Sword Pokémon
Height: 1.7 m (5'07")
Weight: 53.0 kg (116.8 lbs.)
Interesting Facts: Aegislash's body is comprised of a golden sword with the blade pointing downwards. The edge of the blade is white and somewhat serrated near the tip. Its single eye, which is purple with a white, linear pupil, sits where the blade meets the hilt, where it is surrounded by black coloration. The handle is thick at its base, tapers as it progresses to the end, and is striated. Two cloth-like arms emerge from the sides of the hilt. Each arm is primarily black and ends in lavender, transitioned by a slight whorl between the two colors. It carries an ornate shield in at least one of its arms.

THE PAPER MODEL
Height: 23.9 cm/9.4 in
Width: 20.8 cm/8.2 in
Depth: 5.4 cm/2.1 in
No. of Pages: 4
No. of Pieces: 43
Level: Easy
Designer: Brandon
Photo: Olber

NOTES: Follow the numbers, starting from the bottom of the blade going up. When connecting the shield to the body, you can choose to either glue the arms directly to the shield and then glue on the handle, or put a magnet in the shield and handle to hold them (impermanently) together that way too. Close at the top. Weight the base if you wish to use it.

Download: A4 / Letter

COFAGRIGUS (Happy Halloween!)

563 / Cofagrigus- Pokémon Papercraft
Name: Cofagrigus
Type: Ghost
Species: Coffin Pokémon
Height: 1.7 m (5'07")
Weight: 76.5 kg (168.7 lbs)
Interesting Facts: Cofagrigus is a blue and yellow sarcophagus with red, menacing eyes and four ebony hands that appear to be shadows. A simply designed face is prominent on the "forehead" of the Pokémon. Its real face is covered up by parts that slide out of the way when it is active. White, sharp fangs create a taunting smile and flamboyant patterns veil the coffin. The coffin is said to be made of gold. Ancient legends once told Cofagrigus could eat nearby humans and turn their lifeless bodies into mummies. It lives in tombs and ruins.

THE PAPER MODEL
Height: 25.2 cm/ 9.9 in
Width: 30.7 cm/ 12.1 in
Depth: 19.8 cm/ 7.8 in
No. of Pages: 8
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES:  The model itself is not hard, the arms are big and easy to build. Start at the top of the coffin, glue the details as soon as possible and close at the bottom. More detailed instructions are included on the template. Make sure to follow the instructions, specially around the top of the head. Reinforcing the inside is important, since the arms are heavy and you should reinforce the arms (especially the lower ones). You can also use wire to support the arms from the inside, just poke a hole where the arm will go and pass the wire through that hole, with a length that will go to hand of the other arm. Glue the wire to the body (I used superglue) and insert the arms after, gluing them to the body.

Download: A4 / Letter

YAMASK

562 / Yamask- Pokémon Papercraft
Name: Yamask
Type: Ghost
Species: Spirit Pokémon
Height: 0.5 m (1'08")
Weight: 1.5 kg (3.3 lbs)
Interesting Facts: Due to being a human long ago, it has memories of being a human. If someone wears the mask Yamask carries, they will become possessed by the Yamask in question. Sometimes, it looks at this mask and cries, apparently in longing. Yamask is known to wander the ruins of ancient civilizations.

THE PAPER MODEL
Height: 16.4 cm/ 6.5 in
Width: 18.1 cm/ 7.1 in
Depth: 8.9 cm/ 3.5 in
No. of Pages: 2
Level: Easy/Medium
Designer: Brandon
Photo: LuIS
NOTES:  The model is fairly simple, just start at the nose and work by the numbers. It can get tricky close to the tail, so following the numbers there is important. You can glue it to the base or use magnets to make it stand there, further instructions on the pdo. Even with the base it can have problems standing, a coin inside the base is enough, but if you're using magnets to hold it, it probably won't be necessary.

Download: A4 / Letter

SABLEYE

302 / Sableye - Pokémon Papercraft
Name: Sableye
Type: Dark/Ghost
Species: Darkness Pokémon
Height: 0.5 m (1'08")
Weight: 11.0 kg (24.3 lbs)
Interesting Facts: Sableye are very diminutive hominid-like creatures with dark purple bodies. Their bodies are adapted for cave life as they are flexible enough to fit into small crevices while being tough enough to survive cave-ins. Their most distinguishing features are their gemstone-like eyes, which allow them to see in very little light. They have gemstones on their chests which grow as a result of its crystal and mineral diet. They are able to feed on such hard foods because of their sharp razor teeth, which are designed to crunch up rocks.

THE PAPER MODEL
Height: 16.0 cm/ 6.3 in
Width: 10.3 cm/ 4.1 in
Depth: 11.0 cm/ 4.3 in
No. of Pages: 3
Level: Medium-Hard
Designer: PODragon
Photo: LuIS
NOTES: Start at the top of the head, close at the bottom. Attach the gems when building the back. Refer to part numbers for any additional help. Alternate 'diamond' eyes and open mouth textures are included in pack for use with PDO. Build picture shown with alternate textures.

Download: A4 / Letter

MISMAGIUS CHIBI

429 / MISMAGIUS - Chibi - Pokémon Papercraft

Name: Mismagius
Type: Ghost
Species: Magical Pokémon
Height: 0.9 m (2′11″)
Weight: 4.4 kg (9.7 lbs.)
Interesting Facts: Mismagius is a purple ghost-like Pokémon that has the appearance of wearing a cloak. The three red spheres of Mismagius's necklace have a slightly elliptical shape to them, and its neck appears somewhat long and crooked. It has a round head and a large, elaborate, tufted feature atop it, the extremities of the tufts being a lighter color than most of the body. This feature resembles a witch's hat in shape. Mismagius has a skinny, red mouth that resembles a "W." There are extensions on the sides of Mismagius's lower body, the foremost ones looking more ragged in appearance than the ones in the back, that give Mismagius the appearance of wearing some kind of cloak.


THE PAPER MODEL
Height: 10.0 cm/ 3.9 in
Width: 6.9 cm/ 2.7 in
Depth: 7.5 cm/ 3.0 in
Pages: 1
Pieces: 18
Level: Easy
Designer: Brandon
Photo: Carnilmo
NOTES: Follow the numbers while building. Build the head, and the body from neck to bottom. Attach the head fins as possible.

Download: A4 / Letter

GIRATINA

487 / GIRATINA - Pokémon Papercraft

Name: Giratina
Type: Ghost/Dragon
Species: Renegade Pokémon
Height: 4.5 m (14′09″)
Weight: 750.0 kg (1653.5 lbs.)
Interesting Facts: Giratina is able to travel through and control dimensions besides those of time and space. When in its Origin Forme, it is able to pass through dimensions at will, however, it will turn back to its Altered Forme due to the gravity change from the Reverse World. It does so by emitting a whirlwind from its mouth which creates a portal.

THE PAPER MODEL
Height: 21.0 cm/ 8.3 in
Width: 31.0 cm/ 12.2 in
Depth: 23.5 cm/9.3 in
Pages: 9
Pieces: 84
Level: Medium/Hard
Designer: Brandon
Photo: LuIS
NOTES: Build from the tail on. Following the numbers here is really important. Build the legs and before attaching them to the body, glue all of the nails and yellow parts to them. On the middle yellow neck part build pieces 58 and 65, glue the wings to them and only after that glue pieces 59 and 66, after that is done, glue to the body. The head is easy just be careful to follow the numbers.

After quite some time, the wings may start to sag and need to be reinforced with wire or scrap to keep them up.

Download: A4 / Letter

GIRATINA CHIBI

487 / GIRATINA - Chibi - Pokémon Papercraft

Name: Giratina
Type: Ghost/Dragon
Species: Renegade Pokémon
Height: 4.5 m (14′09″)
Weight: 750.0 kg (1653.5 lbs.)
Interesting Facts: Giratina is able to travel through and control dimensions besides those of time and space. When in its Origin Forme, it is able to pass through dimensions at will, however, it will turn back to its Altered Forme due to the gravity change from the Reverse World. It does so by emitting a whirlwind from its mouth which creates a portal.

THE PAPER MODEL
Height: 11.0 cm/ 4.3 in
Width: 10.0 cm/ 3.9 in
Depth: 14.1 cm/ 5.6 in
Pages: 2
Pieces: 32
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the tail on. Make sure to follow the number specially on the legs part. The yellow parts of the neck must be glued before the head is attached. Be careful on the ones that connect on the wings, build the main parts ( 19 and 25 ), glue the wings to it and after that glue pieces 24 and 26.

Download: A4 / Letter

GIRATINA ORIGIN FORME CHIBI

487 / GIRATINA ORIGIN FORME - Chibi - Pokémon Papercraft

Name: Giratina Origin Forme
Type: Ghost/Dragon
Species: Renegade Pokémon
Height: 6.9 m (22′08″)
Weight: 650.0 kg (1433.0 lbs.)
Interesting Facts: Giratina is able to travel through and control dimensions besides those of time and space. When in its Origin Forme, it is able to pass through dimensions at will, however, it will turn back to its Altered Forme due to the gravity change from the Reverse World. It does so by emitting a whirlwind from its mouth which creates a portal.

THE PAPER MODEL
Height: 9.0 cm/ 3.5 in
Width: 8.9 cm/ 3.5 in
Depth: 12.7 cm/ 5.0 in
Pages: 2
Pieces: 43
Level: Hard
Designer: Brandon
Photo: LuIS
NOTES: Build from the tail on. Make sure to follow the number specially on the legs part. The yellow parts of the neck must be glued before the head is attached. Be careful on the ones that connect on the wings, build the main parts ( 19 and 25 ), glue the wings to it and after that glue pieces 24 and 26.

Download: A4 / Letter

SHUPPET

353 / SHUPPET - Pokémon Papercraft
Name: Shuppet
Type: Ghost
Species: Puppet Pokémon
Height: 0.6 m (2'00″)
Weight: 2.3 kg (5.1 lbs.)
Interesting Facts: Shuppet roams about at night in cities, seeking such negative emotions as grudges and envy. If someone develops strong feelings of vengeance, Shuppet will appear in a swarm and line up beneath the eaves of that person's home. It retreats to its nest when the sun begins to rise.

THE PAPER MODEL
Height: 11.9 cm/ 4.7 in
Width: 6.4 cm/ 2.5 in
Depth: 6.5 cm/ 2.6 in
No. of Pages: 2
No. of Pieces: 13
Level: Easy
Designer: Brandon
Photo: Olber
NOTES: Build from the top of the head, following the numbers. Close at the bottom and insert the inner part of the body, sealing it.

Download: A4 / Letter

GENGAR CHIBI

094 / GENGAR - Chibi - Pokémon Papercraft

Name: Gengar
Type: Ghost/Poison
Species: Shadow Pokémon
Height: 1.5 m (4′11″)
Weight: 40.5 kg (89.3 lbs.)
Interesting Facts: Gengar is a dark-purple furred Pokémon with a roundish body. Gengar's hands now connect to the rest of its body and it now has a pair of legs. Gengar has a spiky fur-covered back. Upon evolution, Gengar's eyes are now red. Also, its mouth is usually curled into a sinister grin.

THE PAPER MODEL
Height: 8.0 cm/ 3.1 in
Width: 8.1 cm/ 3.2 in
Depth: 6.6 cm/ 2.6 in
Pages: 1
Pieces: 19
Level: Easy
Designer: Brandon
Photo: Olber
NOTES: Follow the numbers, being a little careful with the spikes on the back.

Download: A4 / Letter