SEADRA

117 / SEADRA - Pokémon Papercraft
Name: Seadra
Type: Water
Species: Dragon Pokémon
Height: 1.2 m (3′11″)
Weight: 25.0 kg (55.1 lbs.)
Interesting Facts: Seadra is a blue seahorse-like Pokémon with a long snout and a two fin-like ridges curving over either side of its head. Its belly is covered with rough, cream-colored scales, which have sharp, pointed, cream-colored tips that exude venom. It can swim in any direction while facing forward by rapidly flapping its fins and tail. It spins its body to create large whirlpools and catch prey, that Seadra swallows it whole using its long snout. The venom it has is toxic enough to make humans faint, but is prized among practitioners of traditional medicine. It makes its nest by either wriggling between or anchoring itself to branches of coral under the ocean. It is markedly vicious, and will mercilessly attack those who venture near its nest.. After a female Seadra gives birth, the male Seadra will take care of the young.

THE PAPER MODEL
Height: 25.7 cm / 10.1 in
Width: 23.7 cm / 9.3 in
Depth: 20.9 cm / 8.2 in
Pages: 9
Pieces: 72 (+ 4 for base)
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start the model at the top of the head, follow the numbers until you complete the belly, set it aside and build the tail, starting at the tip. Close the model at 72, joining the body and the tail. I didn't need wight to make it stand with the base. Further instructions included in the template.

Download: A4 / Letter

MEGA SLOWBRO - MERRY CHRISTMAS!

080 / MEGA SLOWBRO - Pokémon Papercraft
Name: Mega Slowbro
Type: Water/Psychic
Species: Hermit Crab Pokémon
Height: 2.0 m (6′07″)
Weight: 120.0 kg (264.6 lbs.)
Interesting Facts: Upon mega evolving, it becomes engulfed by the Shellder to the point where only its head, arms and tail are visible. Due to the legs being engulfed inside the shell, it balances the body by the tail that sticks out at the opening at the tip of Shellder's spiral. It can move by bouncing, using the tail as a spring. Mega Slowbro's energy has gathered into Shellder, which has increased its hardness. This allows it to act as an armor so hard that nothing can scratch it.

THE PAPER MODEL
Height: 20.6 cm / 8.1 in
Width: 13.1 cm / 5.1 in
Depth: 13.9 cm / 5.5 in
Pages: 8
Pieces: 53 + 6 for optional base
Level: Medium
Designer: LuIS
Photo: LuIS
NOTES: Start with the ears, building the head around 3. Close and glue it to the shell when indicated, but only glue the shell teeth AFTER the head is glued. The rest of the model is pretty simple, build following the numbers and glue the details, such as arms and spikes, when the numbers get to them. Close at the bottom and glue the tail to it. I suggest using some sort of small weight inside the tail to give it more stability. Place the set of 58 and 59 inside the base before closing it, to make it sturdier.

Download: A4 / Letter

DEINO

633 / DEINO- Pokémon Papercraft
Name: Deino
Type: Dark/Dragon
Species: Irate Pokémon
Height: 0.8 m (2′07″)
Weight: 17.3 kg (38.1 lbs.)
Interesting Facts: Deino is a small blue quadrupedal Pokémon with black fur covering its head and neck, concealing everything but its mouth from view. The fur around the neck appears to be bruised and the tail to be bitten off. As it is blind, it will bite at and eat anything that moves, and it has the vigor and energy to bite constantly and without stopping, so precautions must be taken before aproaching a Deino. It primarily lives in caves with abundant water sources.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 8.6 cm / 3.3 in
Depth: 14.4cm / 5.6 in
Pages: 3
Pieces: 37
Level: Medium/Hard
Designer: Brandon
Photo: LuIS
NOTES: Start at the indicated spots, follow the numbers and glue both parts once they are built. It is a tricky model, needs folding to get a good shape, lightly fold the indicated lines and parts. It needs weight to stand, add it to the body. Further instructions and numbers on the .pdo.

Download: A4 / Letter

CUBONE V3 (Happy Halloween!)

104 / CUBONE- Pokémon Papercraft
Name: Cubone
Type: Ground
Species: Lonely Pokémon
Height: 0.4 m (1′04″)
Weight: 6.5 kg (14.3 lbs.)
Interesting Facts: Text

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 10.5 cm / 10.1 in
Depth: 13.7 cm / 5.4 in
Pages: 5
Pieces: 56
Level: Medium/Easy
Designer: Brandon
Photo: LuIS
NOTES: The head can be a bit tricky if you don't fold the indicated lines. Glue the skull and the body once they are both finnished, I also glued the bone to the body, to keep it at the position I wanted.

Download: A4 / Letter

PANCHAM (Halloween Beginnings!)

674 / PANCHAM - Pokémon Papercraft
Name: Pancham
Type: Fighting
Species: Playful Pokémon
Height: 0.6 m (2'00″)
Weight: 17.6 kg (8.0 lbs.)
Interesting Facts: Pancham is a mammalian, bipedal Pokémon that resembles a young panda. It has a white head and tail. There are tufts of fur on top of its head and on its cheeks. It has black circles around its eyes, and the ears are also black, just as the upper body and feet, with the lower body beeing a dark gray. There are small, dark brown circular pads on the soles of its three-toed feet. It carries a small, green leaf in its mouth. It tries to make itself serious towards its foes, but its glare is not so intimidating. If patted on the head, it can't help grinning.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 11.6 cm / 4.5 in
Depth: 9.3cm / 3.6 in
Pages: 3
Pieces: 49
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the top of the head and at the feet. Close at the indicated spots. It needs weight to stand. Glue the details as you go. Numbers and further instructions included in the .pdo.

Download: A4 / Letter

MEOWTH V2 - HAPPY!

052 / MEOWTH - Pokémon Papercraft
Name: Meowth
Type: Normal
Species: Scratch Cat Pokémon
Height: 0.32 m (1'04")
Weight: 4.2 kg (9.3 lbs.)
Interesting Facts: Meowth are valued for their ability to collect coins using Pay Day, as it is the only Pokémon that learns it. Meowth are very fond of anything round and shiny. As such, they have been known to wander about city streets and pick up anything that is round and shiny - coins in particular. It evolves into Persian starting at level 28.

THE PAPER MODEL
Height: 18.0 cm / 7.0 in
Width: 15.2 cm / 5.9 in
Depth: 17.3 cm / 6.8 in
Pages: 4
Pieces: 45
Level: Medium-Easy
Designer: Paperpokés
Photo: LuIS
NOTES: Start at the ears and build the head following the numbers. Glue the whiskers and the medal before closing at the bottom. Start the body at the toes and the tail at the tip. I suggest reinforcing the connection between the body and the tail. Be careful with the paws, they need to be folded at the indicated lines. Close the body at the top and glue the head after both are closed.

Download: A4 / Letter

ATTACK MEOWTH

MEOWTH V2 - ATTACK!

052 / MEOWTH - Pokémon Papercraft
Name: Meowth
Type: Normal
Species: Scratch Cat Pokémon
Height: 0.32 m (1'04")
Weight: 4.2 kg (9.3 lbs.)
Interesting Facts: Meowth are valued for their ability to collect coins using Pay Day, as it is the only Pokémon that learns it. Meowth are very fond of anything round and shiny. As such, they have been known to wander about city streets and pick up anything that is round and shiny - coins in particular. It evolves into Persian starting at level 28.

THE PAPER MODEL
Height: 14.1 cm / 5.5 in
Width: 15.2 cm / 5.9 in
Depth: 17.3 cm / 6.8 in
Pages: 4
Pieces: 45
Level: Medium-Easy
Designer: Paperpokés
Photo: LuIS
NOTES: Start at the ears and build the head following the numbers. Glue the whiskers and the medal before closing at the bottom. Start the body at the toes and the tail at the tip. I suggest reinforcing the connection between the body and the tail. Be careful with the paws, they need to be folded at the indicated lines. Close the body at the top and glue the head after both are closed.

Download: A4 / Letter

HAPPY MEOWTH

ROWLET

722 / ROWLET - Pokémon Papercraft
Name: Rowlet
Type: Grass/Flying
Species: Grass Quill Pokémon
Height: 0,3 m (1′00″)
Weight: 1.5 kg (3.3 lbs.)
Interesting Facts: Rowlet is a small Pokémon, resembling an owl, with round body and two short legs. It is mainly brown with a white underside and facial disc. It has large black eyes and stubby beak, whose top part is white and the lower is orange. It has two leaves on the chest, arranged in a way so it resembles a bowtie. It also has leaves in the undersides of its wings and the tail. It is capable of rotating the head almost 180 degrees and has excellent night vision. It is able to fly silently and attack with powerful kicks.

THE PAPER MODEL
Height: 14.5 cm / 5.7 in
Width: 11.5 cm / 4.5 in
Depth: 11.7 cm / 4.6 in
Pages: 4
Pieces: 26
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the bottom of the body and close at the top of the head. Glue one feather at each side, starting at the front. The head can be rotated in any position you want, just glue the pieces above the ring composed of 14 and 15 in another position and follow with the rest of the pieces of the top of the head. The bowtie and the beak should be glued before the model is closed. Note that the bowtie doesn't rotate with the head. After building the feet, place them on a flat surface and apply glue to the body where they'll connect. If you want the model to stand like it's on the pdo and the pictures you'll need to place something bellow the tail to keep it still while the glue dries.

Download: A4 / Letter

MIMIKYU - Happy Halloween!

778 / MIMIKYU - Pokémon Papercraft
Name: Mimikyu
Type: Ghost/Fairy
Species: Disguise Pokémon
Height: 0.2 m (0′08″)
Weight: 0.7 kg (1.5 lbs.)
Interesting Facts: Mimikyu is a Pokémon whose body is almost entirely hidden under a veil. Its black eyes are visible through holes in the body of its disguise, and the fringe of an amorphous foot or lower body appears to be visible under the hem of its veil. It can extend a black appendage from under its veil. The veil resembles a Pikachu. The cloth is yellow with black tipped ears and the Pikachu face seems to be drawn with crayons. It also carries a small stick that looks like Pikachu's tail. It is always covered by the disguise, rumored because it is weakened by sunlight, so it uses the disguise as protection. It is believed that seeing it's true form can cause a mysterious illness. Mimikyu's disguise is modelled after Pikachu because of the popularity of Pikachu-styled merchandise. This lonely Pokémon thought that this disguise would allow it to make friends with people.

THE PAPER MODEL
Height: 17.0 cm / 6.7 in
Width: 16.3 cm / 6.4 in
Depth: 25.6 cm / 10.0 in
Pages: 4 (5 with the optional hand)
Pieces: 34 (+2 for optional hand)
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the top of the head and close at the bottom of the body, at the bottom of the cloth. Make sure to lightly fold all the lines on both pieces of the bottom of the cloth. Build the foot starting from the top and closing at the bottom. After both parts closed, glue them together. Build the tail starting from the top and closing at the bottom. Cut a little hole on the base of the cloth and put the tail through it, gluing it at the foot. The shadow hand is optional, to glue it just cut a line on the bottom of the cloth and glue it to the foot.

Download: A4 / Letter

MEGA GALLADE

475 / MEGA GALLADE - Pokémon Papercraft
Name: Mega Gallade
Type: Fighting/Psychic
Species: Blade Pokémon
Height: 1.6 m (5′03″)
Weight: 56.4 kg (124.3 lbs.)
Interesting Facts: When Gallade mega evolves, it gets red plates on its arms, and the helmet and cape-like protrusions on its head and back give it a knightly appearance. If the situation demands, it can use its psychic power to reshape both arms into blades, and fight using a dual-wielding style. Its upper body becomes white, and the spikes on its head elongate.

THE PAPER MODEL
Height: 22.0 cm / 8.6 in
Width: 21.8 cm / 8.5 in
Depth: 15.2 cm / 5.9 in
Pages: 6
Pieces: 67
Level: Medium-Hard
Designer: LuIS
Photo: LuIS
NOTES: Start by building the head, make sure to follow the numbers, it's the best way to build it. After the head is built, slide the head details by the side and glue the bigger one by the tips and the smaller ones on the side. The head and the body are separated, so put the head aside and proceed to the body. Start at the neck , build the arms and reinforce them inside. Now proceed to the cape, it's the hardest thing on the model and there's a small trick. First you'll build the white parts and glue them to the red piece that goes in between, than you'll glue the green, leaving the tabs of the green parts to connect to the body and reinforce the inside. I would still recommend you reinforce a bit more than just this tab. Close the body at the bottom. For the "hands" first build the red part and build the white ones around it. The connection is the same for the small and the big details. The legs are the last part. Start them at the bottom and build up. Make sure to reinforce them too. Gluing them will take a lot of patience, refer to the .pdo for reference, hold them in place while they dry. I didn't need any weight to make it stand, but it tilts a bit if a strong wind hits, so you may wanna put some weight inside the legs. Further instructions on the template.

Download: A4 / Letter

RHYDON DOLL

RHYDON DOLL
Height: 9.0 cm / 3.5 in
Width: 8.9 cm / 3.5 in
Depth: 9.1 cm / 3.5 in
Pages: 2
Pieces: 35
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: This one is pretty easy. Start at the horn at the top of the head, building around it. For a better result, fold the fins at the sides of the head. Close the body at the bottom. The legs are separated, build them starting from the toes and close at the indicated spot. Place the body on a flat surface and glue the legs on a similar position the the picture and the pdo. Further instructions and numbers on the pdo.

Download: DOWNLOAD

NOSEPASS

299 / NAME - Pokémon Papercraft
Name: Nosepass
Type: Rock
Species: Compass Pokémon
Height: 1.0 m (3′03″)
Weight: 97.0 kg (213.8 lbs.)
Interesting Facts: Nosepass is a blue, angular bipedal Pokémon that closely resembles the Easter Island Heads. The red triangular nose is highly magnetic, functioning as an electromagnet, always pointing North. It aso stops Nosepass from coming near each other, since they would repel themselves. The magnetism is stronger during the winter. It has arms and legs without any visible joints and small, circular holes on the undersides. Its arms resemble compass needles. The eyes are covered by dark, somewhat mask-like markings, have the appearance of being closed. They live in caves and use the electromagnetism to sraw iron objects to its body when in danger and to capture prey. They only moves a little over 3/8 of an inch each year.

THE PAPER MODEL
Height: 14.5 cm / 5.7 in
Width: 25.8 cm / 10.1 in
Depth: 14.8 cm / 5.8 in
Pages: 5
Pieces: 28
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start the model at the top of the head and close at the bottom. Make sure to be cereful and follow the instructions around the nose, that's the hardest part. You can either glue the arms or use magnets to hold them in place. Must fold lines are indicated in green. Once the legs have been built, palce them on a flat surface in a position that resembles the pdo, put glue on top of them and place the body, leaving it still to dry. Numbers and further instructions on the pdo.

Download: A4 / Letter

TOTODILE V2

158 / TOTODILE - Pokémon Papercraft
Name: TotodileType: WaterSpecies: Big Jaw PokémonHeight: 0.6 m (2'00″)Weight: 9.5 kg (20.9 lbs.)Interesting Facts: Totodile are very powerful especially underwater. They have very powerful jaws and have a bad habit of biting anything they see. So better not turn your back on a Totodile. They, however, are always ready for a laugh and are very playful. Evolves into Croconaw then to a Feraligatr.


THE PAPER MODEL
Height: 14.9 cm / 5.8 in
Width: 11.6 cm / 4.5 in
Depth: 11.6 cm / 4.5 in
Pages: 3
Pieces: 42 + Optional base
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start at the top of the mouth, building the nose first and the head around it. Be careful with the fingers, they are the hardest part, I really suggest tweezers to build them. Glue the details before closing at the tip of the tail. You can either build the base of use weight inside to make it stand, keep in mind that it took me some weight for it to stand, just add it a little bit at a time and place on a flat surface to see if it stands. Further instructions and numbers at the pdo.

Download: A4 / Letter

CHESPIN

650 / CHESPIN - Pokémon Papercraft
Name: Chespin
Type: Grass
Species: Spiny Nut Pokémon
Height: 0.4 m (1′04″)
Weight: 9.0 kg (19.8 lbs.)
Interesting Facts: Chespin is a bipedal, mammalian Pokémon. It has a light brown front with dark brown arms and three triangular markings on its face. There is a tough, green shell covering its back, which extends from its head to halfway down its tail. There is a small, off-center hole in the shell on the back of Chespin's head. The shell can protect Chespin from powerful attacks. Around the face, the shell has four leaf-like spikes, and one split into three parts on the back of its head. These quills are typically soft, but Chespin can stiffen them and use them for attack as well. Chespin's oval eyes are brown, and it has a triangular red nose and rodent-like incisors. Its arms have three fingers, while its feet have two long claws. The visible part of its tapered tail is orange. Despite having a curious nature that tends to get it in trouble, Chespin keeps an optimistic outlook and does not worry about small details.

THE PAPER MODEL
Height: 16.4 cm / 6.5 in
Width: 9.8 cm / 3.9 in
Depth: 12.8 cm / 5.0 in
Pages: 3
Pieces: 43
Level: Medium
Designer: LuIS
Photo: LuIS
NOTES: Start with the top of the head, working down. Be a bit careful with the spikes and such. Close at the feet. Pieces are numbered as well, per usual.

Download: A4 / Letter

SEEL

086 / SEEL - Pokémon Papercraft
Name: Seel
Type: Water
Species: Sea Lion Pokémon
Height: 1.1 m (3′07″)
Weight: 90 kg (198.4 lbs.)
Interesting Facts: Seel is a pinniped Pokémon with a thick hide covered in bluish white fur. It has a pale tan maw with a large tongue, and tusks on the lower jaw. It has black eyes and nose, that can close while it swims. The horn on the top of the head is used alongside with the tusks to bore through ice floes. It has two flippers on the chest and two on the tail, which resemble a waterspout when raised. It lives on frigid ocean waters. The warm fur and thick hide allow it to swim in cold waters up to -40ºF. It thrives in these cold environments, becoming more active as the temperature drops. It sleeps during the day and hunt under the ice in the late day and evening hours. While a graceful swimmer, it is awkward and struggles to move on dry land.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 18.1 cm / 7.1 in
Depth: 19.6 cm / 7.7 in
Pages: 4
Pieces: 34
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start with the top of the head. Build the mouth around the tongue.Glue the nose and teeth as soon as the numbers get to them, so you can apply pressure from the inside. Close at the indicated place.

Download: A4 / Letter

AMPHAROS V2

181 / AMPHAROS - Pokémon Papercraft
Name: AmpharosType: ElectricSpecies: Light PokémonHeight: 1.4 m (4' 7")Weight: 61.5 kg (135.6 lbs)Interesting Facts: Ampharos gives off so much light that it can be seen even from space. People in the old days used the light of this Pokémon to send signals back and forth with others far away. It evolves from Flaaffy starting at level 30. It is the final form of Mareep.


THE PAPER MODEL
Height: 18.9 cm / 7.4 in
Width: 13.2 cm / 5.2 in
Depth: 11.1 cm / 4.4 in
Pages: 3
Pieces: 35
Level: Medium-Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the head and close at the feet. Glue the head details as you go. Further instructions included on the template.

Download: A4 / Letter

QWILFISH

211 / QWILFISH - Pokémon Papercraft
Name: Qwilfish
Type: Water/Poison
Species: Balloon Pokémon
Height: 0.5 m (1′08″)
Weight: 3.9 kg (8.6 lbs.)
Interesting Facts: Qwilfish is a sea dwelling Pokemon with a spherical body and a flat tail. The upper half of the body is dark green and the lower is light yellow. The tail also contains a mix of these two colors, with green teal dots on the center. The eyes are even with the body and always seen slanted angrily. Below the eyes are pink lips. All around the body it has sharp, conical spikes, which evolved from scales overtime. In order to attack it drinks 2.6 gallons of water to inflate its body, using the water presure to shoot poisonous quills at its foe. Due to the round body, it is not a great swimmer, and when filled with water it gets even worse.

THE PAPER MODEL
Height: 11.2 cm / 4.4 in
Width: 15.6 cm / 6.1 in
Depth: 21.2 cm / 8.3 in
Pages: 3
Pieces: 28
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start at the top of the head and build it gluing the tail, spikes and mouth as you go and before closing, Make sure to have the lower spikes in a same plane, so they balance the model. You can either close with a the flat or the round piece. Needs a coin inside to stand.

Download: A4 / Letter

DAREDEVIL

616 / DAREDEVIL - Marvel Papercraft
Name: Daredevil
Real Name: Matthew Michael Murdock
Affiliation: Defenders, Avengers, Nelson and Murdock, S.H.I.E.L.D., Marvel Knights...
Height: 1.82 m (6'0″)
Weight: 91 kg (200 lbs.)
Eyes: Blue
Hair: Red
Powers: Peak human physical and mental condition, highly skilled acrobat and hand-to-hand combat, radar sense, superhuman senses.
Origin: Matt Murdock is the son of Jack Murdock, a fighter. Fearing not beeing able to send Matt to college, Jack got involved with the Fixer. When Matt saw and old blind man heading into the street, he jumped in to save him from getting crushed by a radioactive waste truck, unfortunatelly, a cilinder of waste fell out and splashed Matt in the face. Once blinded, Matt found out that his other senses had taken superhuman qualities and developed a new radar sense, which allowed him to see outlines and shapes. Not wanting to lose a fixed match in front of his son, Jack got killed by one of the Fixer's men. Wanting to avenge his father's murder, Matt opened a law firm with his college friend Foggy Nelson, but having promissed to never take up violence he has to create a second identity: Daredevil.
Enemies: Bullseye, Elektra, Hand, Kingpin, Nuke, Purple Man...

THE PAPER MODEL
Height: 23/30 cm / 9.0/11.8 in
Width: 11.7/15.3 cm / 4.6/6 in
Depth: 7.6/10 cm / 3.0/4.0 in
Pages: 3(23cm)/4(30cm)
Pieces: 68
Level: Hard
Designer: Brandon
Photo: LuIS
NOTES: Start at the top of the head and build down, addding details as you go. The face isn't hard, but the nose, eyes and mouth can be a bit harder, be careful around them. The hardest part of the model are the hands, specially if you build the 23cm version. You'll need tweezers and patience to build them. Start at the tip of the fingers and glue them one by one to the upper part of the fingers. Make sure to join all four before gluing them to the palm and to glue the thumb to the palm before gluing the other fingers. After the hands are built, it gets easier. Continue with the torso and legs, making sure to glue one piece of each leg at a time. Close at the bottom. You may wanna add some weight, since it can fall when hit by some wind. The sticks on the hands can either be glued or held in place by magnets, just put one on the palm and one inside each stick.

Download: 23cm / 30cm
Download V2: 23cm / 30cm (Textures from Ssingh511)

Daredevil V2

TOGEPI V2 - HAPPY EASTER!

175 / TOGEPI - Pokémon Papercraft
Name: Togepi
Type: Fairy
Species: Spike Ball Pokémon
Height: 0.30 m (1'00")
Weight: 1.50 kg (3.3 lbs.)
Interesting Facts: Togepi is a small, light yellow Pokemon with a round body still encased in its eggshell, which has blue and red shapes all over. It has stubby hands and feet with two toes. It has black eyes and five spikes on the head. It is able to release Poison from the spikes on the head. It's shown in the anime that it can retract inside its shell, doing so usually to sleep. It is able to siphon positive energy of others and release to these in need. It has a very joyful nature, which is said to share with the ones that take care of it. Because of its disposition, it is usually seen as a sign of good luck, especially if someone is capable of getting a sleeping Togepi to stand. It is rare in the wild, but can be found living within forests.

THE PAPER MODEL
Height: 14.5 cm / 5.7 in
Width: 15.4 cm / 6.1 in
Depth: 11.6 cm / 4.6 in
Pages: 5
Pieces: 36
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start at the top of the head and close at the bottom. Build the first segment of the shell with the cracks and the top and glue the head to it, applying presure from the inside. Close the shell at the bottom, but don't forget to glue the arms before closing. Refer to the pdo when gluing the feet to the shell.

Download: A4 / Letter

MEGA CHARIZARD Y - 20 YEARS OF POKÉMON!

006 / MEGA CHARIZARD Y - Pokémon Papercraft
Name: Mega Charizard Y
Type: Fire/Flying
Species: Flame Pokémon
Height: 1.7 m (5′07″)
Weight: 100.5 kg (221.6 lbs.)
Interesting Facts: Upon mega evolving, Charizard Y becomes more sleeky and expansive. While it keeps the type and coloration of Charizard, the pupils are white, three pointed horns on the top of the head, the neck is shorter and the hands much smaller, but with a larger torso and legs. It develops small wings on the wrists, while the ones on he back become larger and have ragged edges. It has three thornes and a much larger flame than regular Charizard. It is said to have incredible flying prowess, reching incredible heights.

THE PAPER MODEL
Height: 20.0 cm / 7.9 in
Width: 34.9 cm / 13.7 in
Depth: 20.9 cm / 8.2 in
Pages: 7
Pieces: 115
Level: Hard
Designer: LuIS
Photo: LuIS
NOTES: Start the model at the head and close at the feet. Needs to be weighed to stand. It's important to reinforce the connection between the wings and the body, glue some scrap paper inside. Further instructions on the packs and the template.

Download: A4 / Letter