TRUBBISH (Brandon's Bday)

568 / TRUBBISH - Pokémon Papercraft
Name: Trubbish (Yabukuron)
Type: Poison
Species: Garbage bag Pokémon
Height: 0.6 m (2′00″)
Weight: 31.0 kg (68.3 lbs.)
Interesting Facts: Yabukuron emit burp-like gases which, when inhaled, will render the victim bedridden for a week. This Pokémon was created when a garbage dump accidentally had a chemical change of some sort.

THE PAPER MODEL
Height: 12.0 cm / 4.7 in
Width: 19.6 cm / 7.7 in
Depth: 8.0 cm / 3.1 in
Pages: 3
Pieces: 20
Level: Easy
Designer: PMF
Photo: PMF
NOTES: Pretty simple to build. Start by building the top of the feet and glue the bottom on them. The arms are simple too, just need to start from the tips to the "shoulders" just like the ears that work the same way.. The whole body is a big ball so start at the top and close the model at the bottom, making sure the lines fit correctly. When all is done, glue the spiky circles at the sides and glue the arms in the middle of them; just make sure the blue circle is on top. Then glue the ears on the head and the feet below it.

Download: A4 / Letter

ALTARIA

334 / ALTARIA - Pokémon Papercraft
Name: Altaria
Type: Dragon / Flying
Species: Humming Pokémon
Height: 1.1 m (3'07″)
Weight: 20.6 kg (45.4 lbs.)
Interesting Facts: Altaria resembles a large blue phoenix-like Pokémon with a long neck and white cheeks. The feathers of its body make it resemble a cumulus cloud and two long blue feathers extend from the back of its head. It wraps its two cloud-like wings around its body to keep itself warm. Altaria’s blue feet have four toes, three forward and one backward, and it has five tail feathers, the ones to the sides being longer than the inner ones.

THE PAPER MODEL
Height: 14.8 cm / 5.8 in
Width: 29.0 cm / 11.4 in
Depth: 17.6 cm / 6.9 in
Pages: 5
Pieces: 35
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Build the body, and build out to the tip of each wing. Close at the very end of the wings. Be sure to balance the feet before gluing to the body. It is also suggested to add some cotton to the wings, for extra effect. And don't forget to to trim off the excess white around the streamers.
Also note that the wings have a little bit of extra definition compared to the build.

Download: A4 / Letter

DEOXYS : ATTACK

386 / DEOXYS - Pokémon Papercraft
Name: Deoxys : Attack
Type: Psychic
Species: DNA Pokémon
Height: 1.7 m (5'07″)
Weight: 60.8 kg (134.0 lbs.)
Interesting Facts: The Attack Forme has basically the same leg-shape as the Normal Forme, but the stripes are no longer segmented and run down for mostly all of the legs' length, with a large spike on each knee. In place of its arms Deoxys has a pair of whip-like tentacles that come to a point were its hands would be. Deoxys has triangle-shaped "ears" and a single spike on top of its head. Most of the orange "skin" has disappeared to reveal even more of a black, lined inner body, with the lines shown to converge at the crystalline organ. In Generation IV, this Forme is obtained by touching the southeast meteorite in Veilstone City or on Route 3.

THE PAPER MODEL
Height: 23.9 cm/ 9.4 in
Width: 21.2 cm/ 8.3 in
Depth: 28.1 cm/ 11.1 in
Pages: 4
Pieces: 56
Level: Medium
Designer: Brandon
Photo: Brandon
NOTES: This build order is interesting, to say the least. Build the head and neck, then set it aside. Then build the tentacles, and attach the first piece of the shoulder to connect them both. If you do connect them by the connection they share, just do not fold the corresponding tabs and glue them together. Then build the gem, and attach the arms to the large piece of the body. Continue to attach the gem, all the while leaving the back open. Then attach the head and close the back. Close the body at the bottom of the waist, and attach the legs.
Also, like Normal Forme, it needs a base or some form of support in order to stand.

Download: A4 / Letter

SALAMENCE

373 / SALAMENCE - Pokémon Papercraft
Name: Salamence
Type: Dragon/Flying
Species: Dragon Pokémon
Height: 1.5 m (4′11″)
Weight: 102.6 kg (226.2 lbs.)
Interesting Facts: Salamence is an extremely vicious Pokémon. It is also arrogant about its victories by spouting intense flames into the air. This behavior may be explained due to the fact that it faced many hardships to get its wings to grow, and therefore, it is very proud of its achievement.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 25.7 cm/ 10.1 in
Depth: 38.2 cm/ 15.0 in
Pages: 10
Pieces: 58
Level: Medium/Hard
Designer: Brandon
Photo: Skeleman
NOTES: Build from head back, closing at the tail or the bottom of the rear feet. It is suggested to reinforce the wings so the joint is stronger.

Download: A4 / Letter


(Final scales of Shelgon and Salamence are much larger than pictured)

AGGRON

306 / AGGRON - Pokémon Papercraft
Name: Aggron
Type: Steel / Rock
Species: Iron Armor Pokémon
Height: 2.1 m (6′11″)
Weight: 360.0 kg (793.7 lbs.)
Interesting Facts: Aggron are very fierce and aggressive Pokémon. They claim entire mountains as their territory, patrolling it at all times and mercilessly beating up intruders. The gouges in its armor are apparently worn with pride as mementos from battles. If their environment is damaged by a flood or a forest fire, they will restore the area by bringing in topsoil and planting trees. It evolves from Lairon starting at level 42. It is the final form of Aron.

THE PAPER MODEL
Height: 20.9 cm/ 8.2 in
Width: 20.0 cm/ 7.9 in
Depth: 32.7 cm/ 12.9 in
Pages: 10
Pieces: 87
Level: Medium
Designer: Brandon
Photo: Brandon
NOTES: Build from head down, closing at the tip of the tail. The only tricky part about this one is the head. Like Lairon, it's in multiple parts, but this time 3 instead of 2. Make the jaw first, attach the part with the eyes, and then attach the skull and horns. Then continue on to the neck, and attach the head once the neck is done. Also like Lairon, corresponding rings are lettered. Corresponding pieces are numbered; each piece is to be attached once the piece it attaches to is complete.

Download: A4 / Letter

SHELGON

372 / SHELGON - Pokémon Papercraft
Name: Shelgon
Type: Dragon
Species: Endurance Pokémon
Height: 1.1 m (3′07″)
Weight: 110.5 kg (243.6 lbs.)
Interesting Facts: Upon evolution from Bagon, bone structures have formed all around the Pokémon's body, becoming a shell with two openings: one in front, leaving only its yellow eyes visible, and one in back. Inside the structures, its body is busy forming for its next evolution, although its gray-colored legs are visible extending from the shell’s underside. The inner portions of the legs have red coloration, and there are three ridges on the top of its shell.

THE PAPER MODEL
Height: 13.0 cm/ 5.1 in
Width: 12.1 cm/ 4.8 in
Depth: 11.9 cm/ 4.7 in
Pages: 4
Pieces: 34
Level: Easy
Designer: Brandon
Photo: Skeleman
NOTES: Pretty straightforward build. Start at the front, close at the back. Attach the fins and legs when possible. Be sure the legs are level before attaching.

Download: A4 / Letter

LAIRON

305 / LAIRON - Pokémon Papercraft
Name: Lairon
Type: Steel/Rock
Species: Iron Armor Pokémon
Height: 0.9 m (2′11″)
Weight: 120.0 kg (264.6 lbs.)
Interesting Facts: Lairon feeds on iron contained in rocks and water, and drinks mineral spring water until it is bloated, as it has been said doing so tempers its steel body. Lairon makes its nests near such mineral springs, on mountains where iron ore is buried. Do to its nesting preferences, this may cause it to clash with humans attempting to mine the ore.

THE PAPER MODEL
Height: 13.7 cm/5.4 in
Width: 20.8 cm/ 8.2 in
Depth: 24.7 cm/9.7 in
Pages: 7
Pieces: 60
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: The head, jaw, body, and legs are all separate parts. Build the head first, then the jaw, and then the body. Connect these, then make the legs and attach them. Letters have been added to denote matching parts. Close the model at "I" and then press on the tail.

Download: A4 / Letter

BAGON

371 / BAGON - Pokémon Papercraft
Name: Bagon
Type: Dragon
Species: Rock Head Pokémon
Height: 0.6 m (2′00″)
Weight: 42.1 kg (92.8 lbs.)
Interesting Facts: Bagon harbors a never-ending dream of one day soaring high among the clouds. As if trying to dispel its frustration over its inability to fly, this Pokémon slams its hard head against huge rocks and shatters them into pebbles. They also hurl themselves off cliffs in vain attempts to fly.

THE PAPER MODEL
Height: 13.0 cm/ 5.1 in
Width: 7.4 cm/ 2.9 in
Depth: 8.6 cm/3.4 in
Pages: 2
Pieces: 30
Level: Easy
Designer: Brandon
Photo: Skeleman
NOTES: Build from the top down, closing at the feet. Attach the 'crest' before advancing too far, so you have room to apply pressure to secure it. Also, take care with the teeth; they're pretty small, and can be somewhat fiddly. Also, it's suggested that you add a weight in between the legs to help it balance.

Download: A4 / Letter

ARON

304 / ARON - Pokémon Papercraft
Name: Aron
Type: Steel / Rock
Species: Iron Armor Pokémon
Height: 0.4 m (1′04″)
Weight: 60.0 kg (132.3 lbs.)
Interesting Facts: To make its body, Aron feeds on iron ore that it digs from mountains. Occasionally, hunger may drive it to descend from the mountains to eat bridges and rails, which may produce some same major trouble and cause it to be viewed as a pest. It evolves into Lairon starting at level 32, who evolves into Aggron starting at level 42.

THE PAPER MODEL
Height: 12.0 cm/4.7 in
Width: 8.7 cm/ 3.4 in
Depth: 14.3 cm/5.6 in
Pages: 4
Pieces: 26
Level: Easy
Designer: Brandon
Photo: Skeleman
NOTES: Build the head and body, and the block for the back separately. Close the Head/body with the flat gray piece on the second page, and close the block with the large white piece that corresponds to the same gray piece (on the last page). Glue on the feet before closing the main body, and be sure they are level.

Download: A4 / Letter

RAYQUAZA

384 / RAYQUAZA - Pokémon Papercraft
Name: Rayquaza
Type: Dragon / Flying
Species: High Sky Pokémon
Height: 7.0 m (23'00″)
Weight: 206.5 kg (455.2 lbs.)
Interesting Facts: Rayquaza constantly flies around the globe in the ozone layer, stopping and descending only to land on the peak of the Sky Pillar to rest. It is extremely territorial and will attack any intruders of its home. Due to the fact that it can calm the other members of the Weather Trio, it can be seen to be considered a leader and calm.

THE PAPER MODEL
Height: 37.4 cm/14.7 in
Width: 26.1 cm/ 10.3 in
Depth: 24.1 cm/9.5 in
Pages: 8
Pieces: 130
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: Many of the body pieces are quite repetitive, but when it comes to the arms and hands be sure to take your time and be very careful. These parts, along with the fins, are what constitute the difficulty. Other than that, all of the pieces of the body are numbered, so just match them up as you go and it is fairly straight forward. Also note that the fins are designated to the body piece by the numbers on the end of each body section. When attaching each fin, check that the curve of it lines up with the curve on the body. Each one goes to a specific place on the tube (Inside of the curve, outside). It is also suggested to leave one end of each body section open until all fins are attached, so that you can apply pressure from the inside.

Download: A4 / Letter

STANTLER (Happy Christmas 2010)

234 / STANTLER - Pokémon Papercraft
Name: Stantler
Type: Normal
Species: Big Horn Pokémon
Height: 1.4 m (4'07"″)
Weight: 71.2 kg (157.0 lbs.)
Interesting Facts: Stantler are antlered Pokémon that are similar to real-life reindeer or caribou. These Pokémon are quadrupeds, with each leg ending in a black hoof. The pelt of a Stantler is a tan color with a cream-colored belly and a few cream-colored spots on the back. They have have large, brown noses and a pair of pale cream-colored antlers, each with a black orb in the center. There is confusion whether the tail of a Stantler is cream or brown, since the artwork has differed this way between generations. However, the official artwork from Pokémon HeartGold and SoulSilver depicts Stantler with a brown tail, the same brown as its pelt.

THE PAPER MODEL
Height: 18.2 cm/ 7.4 in
Width: 10.0 cm/ 3.9 in
Depth: 13.8 cm/ 5.4 in
Pages: 4
Pieces: 43
Level: Medium
Designer: PMF & Brandon
Photo: PMF
NOTES:This ain't such a hard model, but it ain't easy either. Start by building the head and build the ears on. While it dries, build the legs up to the hips. Glue the neck on the head and the chest pieces; careful it's a bit tricky. You can then glue the front legs on the chest.
Build the rear piece without attaching it at the rear/tail part. Glue the rear to the rest of the body and then glue the rear legs on. Close the body with the piece located where the tail go.
You then just need to build the tail and glue it on and the antlers with the small balls. You can either choose to make em as balls or as cylinders. A tip for the antlers: build the front part and then glue the flat piece over it. So if you look at the piece, build the sides and close with the big "U" in the middle of the piece.

Download: A4 / Letter

PIKACHU v2

025 / PIKACHU - Pokémon Papercraft
Name: Pikachu
Type: Electric
Species: Mouse Pokémon
Height: 0.4 m (1'04")
Weight: 6.0 kg (13.2 lbs.)
Interesting Facts: A Pikachu is a short, chubby, ground-dwelling rodent notable for its Electric abilities. Pikachu have short, yellow fur with brown stripes on the back, red cheeks that can produce small jolts of electricity, a mouth that looks like a sideways three, black-tipped ears, along with an unusually shaped tail, resembling a lightning bolt. Besides its evolution and pre-evolution, it may be related to Plusle, Minun, Pachirisu, and Emonga due to notable physical similarities. Pikachu are known to have acute senses of hearing, thanks to their large ears. Most domestic Pikachu are able to understand and interpret human speech at levels far surpassing those of any pet dog.

THE PAPER MODEL
Height: 18.1 cm/7.1 in
Width: 15.2 cm/ 5.9 in
Depth: 16.1 cm/6.3 in
Pages: 5 (pikachu) + 1 (scarf)
Pieces: 43 (male)/45 (female) + 1 (scarf)
Level: Medium
Designer: Brandon/Lyrin - Scarf: PMF
Photo: Lyrin
NOTES: The model isn't difficult, the only tricky parts are the fingers. First thing, start with the thumb and create the five pyramids that compose the fingers. Once you've done it, making the rest of the hand will be really simple. Anyway, refer to the pdo for building them: it'll be even simpler (I've also coloured the finger-parts that need to be glued together with the same colour). As for the rest, follow the numbers on the template and you'll be fine. Once you reach the tail, choose if you want a female or a male Pikachu, and only print the corresponding page. And if you want to build the scarf, there's a close-up picture in the download pack that shows how the knot is done (and also the fingers, so you can use that picture for further reference). Please note that you can use normal printer paper to print out the scarf (it'll be simpler to wrap around pika's neck, in fact), and that there's no need to glue it: it's completely unwrappable and removable. There are also a blue and a red scarf texture in the pack, in case you want to customize your Pikachu (you'll have to change the texture settings in pepakura viewer to use them).

Download: A4 / Letter

Pikachu v1

WAILORD

321 / WAILORD - Pokémon Papercraft
Name: Wailord
Type: Water
Species: Float Whale Pokémon
Height: 14.5 m (47'07")
Weight: 398.0 kg (877.4 lbs.)
Interesting Facts: Wailord are mammalian Pokémon that are well known as the largest Pokémon discovered so far. They have small beady eyes, a huge mouth, a throat that is lined with grooves and four white spots aligned on its back. It has two pairs of fins along its side and a horizontal tail at the back. It's vaguely shaped like a torpedo or a blimp.

THE PAPER MODEL
Height: 17.1 cm/6.7 in
Width: 17.7 cm/ 7.0 in
Depth: 25.0 cm/9.8 in
Pages: 7
Pieces: 37
Level: Easy
Designer: PMF
Photo: Olber
NOTES: Build from mouth to tail. Attach the fins when possible. Close the model at one of the 'butt' panels. Have fun.

Download: A4 / Letter

DEOXYS : NORMAL

386 / DEOXYS - Pokémon Papercraft
Name: Deoxys (Normal)
Type: Psychic
Species: DNA Pokémon
Height: 1.7 m (5′07″)
Weight: 60.8 kg (134.0 lbs.)
Interesting Facts: Deoxys is not known to evolve into or from any other Pokémon, but it has four different Formes.

THE PAPER MODEL
Height: 20.6 cm/8.1 in
Width: 25.9 cm/ 10.2 in
Depth: 18.2 cm/7.2 in
Pages: 4
Pieces: 78
Level: Medium
Designer: Brandon
Photo: Brandon
NOTES: Start off by making the head and neck. Attach them, and continue to making the body. Finish the body all except for one piece- the very last piece on the first page. Attach it to one side and continue on to the rest. Build the waist, attach the legs (which should be built from the bottom up), and set it aside. Build one arm, and attach it. From there, close the bottom of the body- with one side open still- and attach the waist and legs. After that, build the other arm, close the body, and finish it up.

Some things to note are that unlike the other two Deoxys, this one will not stand on its own.
Also unlike the other Deoxys, you have a choice of what the arms will be. There are tentacles and arms included for both sides, and you can build any combination of them. Pictured are the left arm and right 'tentacles'.

Download: A4 / Letter

DEOXYS : SPEED

386 / DEOXYS - Pokémon Papercraft
Name: Deoxys (Speed)
Type: Psychic
Species: DNA Pokémon
Height: 1.7 m (5′07″)
Weight: 60.8 kg (134.0 lbs.)
Interesting Facts: Deoxys is not known to evolve into or from any other Pokémon, but it has four different Formes. The Speed Forme has a sleek gray body. Deoxys only has one tentacle on each side of its body. The back of Deoxys's head is elongated and comes to a point. It has also lost most of its orange "skin" from its body and has narrow appendages, making it streamlined and aerodynamic.

THE PAPER MODEL
Height: 22.9 cm/9.0 in
Width: 16.3 cm/ 6.4 in
Depth: 14.5 cm/5.7 in
Pages: 3
Pieces: 52
Level: Medium
Designer: Brandon
Photo: Brandon
NOTES: Build from the head down, and close with the triangular tip of the legs. Do not worry about the tabs missing between the head and 'ears', they are not necessary.

Download: A4 / Letter

DEOXYS : DEFENSE

386 / DEOXYS - Pokémon Papercraft
Name: Deoxys : Defense
Type: Psychic
Species: DNA Pokémon
Height: 1.7 m (5′07″)
Weight: 60.8 kg (134.0 lbs.)
Interesting Facts: Deoxys is not known to evolve into or from any other Pokémon, but it has four different Formes. The Defense Forme is bulky and thick; it has wide legs that are somewhat flat at the end and have a bluish-green spot on each of the knees. It has flat, broad tentacles that can't be twisted and hang down to the ground when not defending Deoxys. In addition, Deoxys' head has been fused with its body, resembling a helmet. Its "skin" has thickened and covered all of its body parts for greater defense.

THE PAPER MODEL
Height: 18.9 cm/7.4 in
Width: 14.9 cm/ 5.9 in
Depth: 9.1 cm/3.6 in
Pages: 4 (A4)/5 (Letter)
Pieces: 47
Level: Medium
Designer: Brandon
Photo: Brandon
NOTES: The build isn't too difficult, but it does get tricky while you're working on the lower body after adding the arms. As long as you can navigate around them while you work, this is pretty simple. It may also help to put some weight in the feet to stabilize it. It stands without, but is a little wobbly.

Download: A4 / Letter

FROSLASS

478 / FROSLASS - Pokémon Papercraft
Name: Froslass
Type: Ice / Ghost
Species: Snow Land Pokémon
Height: 1.3 m (4′03″)
Weight: 26.6 kg (58.6 lbs.)
Interesting Facts: Froslass' behavior is somewhat reminiscent to that of the Yuki-onna in Japanese mythology, since it will wander around snowstorms or blizzards to find unsuspecting humans and prey and will attack by freezing them into solid ice. Froslass are also very caring and will protect those who she loves and trusts, especially their young. It evolves from a female Snorunt when exposed to a Dawn Stone. It is one of Snorunt's two final forms.

THE PAPER MODEL
Height: 20.0 cm/7.9 in
Width: 9.8 cm/ 3.9 in
Depth: 10.8 cm/4.3 in
Pages: 5
Pieces: 37
Level: Medium
Designer: POdragon
Photo: Brandon
NOTES: Build from the top down, taking special care with the thin strips around the mouth area. Close at the bottom.

Download: A4 / Letter

GROUDON

383 / GROUDON - Pokémon Papercraft
Name: Groudon
Type: Ground
Species: Continent Pokémon
Height: 3.5 m (11′06″)
Weight: 950.0 kg (2094.4 lbs.)
Interesting Facts: Slow, stoic, and heavy (2094 pounds--a little over a ton), this super-heavyweight created the land, according to Hoenn legend. It sleeps underground in magma chambers, and causes volcanoes to erupt when it awakens. It is said to appear before those with shining silver spirits. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 22.0 cm/8.7 in
Width: 24.5 cm/ 9.6 in
Depth: 36.6 cm/14.4 in
Pages: 16
Pieces: 120
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: This is by no means an easy craft. The pieces themselves are not too difficult, but fitting them together in the correct order is the trick. Start at the head and build the body to a point at which you can attach some of the blocks on top, then continue on stopping every so often to add more of the layered blocks. Close at the back, adding the tail fins on when closed. When layering the blocks, be sure to apply some pressure so that they fit snugly, and so that the last one does not hang over the edge. Line up the feet with each other before attaching. It is recommended to put some weight in the tail before closing.

Also, when doing the 'puzzle' for it's back, the order of the parts goes (from front to back) R1-B1-R2-B2-R4*-B3*-R3*-B4-R5-B5-R7*-B6*-R6*-B7-R8-B8-R9-B9-R10.
*=Stacked from bottom up. (First one listed is the bottom, middle is the center, last is the top) These do have to be in that exact order, as each piece is a different size.

Download: A4 / Letter

KYOGRE

382 / KYOGRE - Pokémon Papercraft
Name: Kyogre
Type: Water
Species: Sea Basin Pokémon
Height: 4.5 m (14′09″)
Weight: 352.0 kg (776.0 lbs.)
Interesting Facts: Kyogre is most likely based on the Hebrew legends of Leviathan, the unconquerable primal master of the sea. Its counterparts were Behemoth and Ziz. Just as Kyogre is in conflict with Groudon, it was said that at the end of time Leviathan and Behemoth would start a battle that would kill them both. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 9.0 cm/3.5 in
Width: 38.3 cm/ 15.1 in
Depth: 30.8 cm/12.1 in
Pages: 7 (Kyogre)/2 (Base)
Pieces: 50 (Kyogre)/5 (Base)
Level: Medium
Designer: Brandon
Photo: Brandon
NOTES: Build from nose to tail, being sure to insert the flat part into the designated space before closing. Attach wings and fins when possible. Base included, though not required. Just keep in mind the 'wings' may sag a little if not supported.

Download: Kyogre A4 / Kyogre Letter
Base A4 / Base Letter

RAIKOU

243 / RAIKOU - Pokémon Papercraft
Name: Raikou
Type: Electric
Species: Thunder Pokémon
Height: 1.9 m (6′03″)
Weight: 178.0 kg (392.4 lbs.)
Interesting Facts: It is, along with Entei and Suicune, one of the legendary beasts created by Ho-Oh after the burning of the Brass Tower. Of the three legendary beasts, Raikou is said to represent the lightning strike which ignited the burning Brass Tower. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 18.5 cm/7.3 in
Width: 13.1 cm/ 5.2 in
Depth: 35.7 cm/14.1 in
Pages: 7
Pieces: 76
Level: Medium/Hard
Designer: Brandon
Photo: Brandon
NOTES: Build from head to back, closing at the bottom of the feet. Be sure to add the 'thunderclouds' before advancing too far, as you'll need internal pressure for them to set right. When making the tail, you have the option to build it either 2D or 3D. Both ends just glue onto the main piece.

Download: A4 / Letter

SUICUNE

245 / SUICUNE - Pokémon Papercraft
Name: Suicune
Type: Water
Species: Aurora Pokémon
Height: 2.0 m (6′07″)
Weight: 186.4 kg (412.3 lbs.)
Interesting Facts: It is, along with Raikou and Entei, one of the legendary beasts created by Ho-Oh after the burning of the Brass Tower. Of the three legendary beasts, Suicune is said to represent the rains that quenched the flames of the burning Brass Tower.

THE PAPER MODEL
Height: 26.1 cm/10.3 in
Width: 16.6 cm/ 6.5 in
Depth: 25.0 cm/9.8 in
No. of Pages: 8(Sui)/3(Base)
No. of Pieces: 48(Sui)/6(Base)
Level: Medium/Hard
Designer: Brandon
Photo: Toshi/Brandon
NOTES: Build from the head to back, attaching the crest, legs, and cloud when possible, so that pressure can be applied from the inside. Close at the rear.
Separate files included for the base shown in the picture.

Stock photo used for the crest texture can be found here.

Download: Suicune A4 / Suicune Letter
Base A4 / Base Letter

ENTEI

244 / ENTEI - Pokémon Papercraft
Name: Entei
Type: Fire
Species: Volcano Pokémon
Height: 2.1 m (6′11″)
Weight: 198.0 kg (436.5 lbs.)
Interesting Facts: Entei is a massive lion-like Pokémon with some mastiff qualities. It is covered in brown fur with a long, thick mane covering its neck. It has gray plates surrounding the cape that makes it look as if smoke is coming out of a crater on its back, and a plate beneath the cream belly fur on its chest. Entei has white paws with apparently retractable claws and brown paw pads, and black cuff-like bands on its legs. It has a red face with a white plate that resembles a handlebar mustache on its face, and a three-pointed yellow crest on its forehead. Entei's head appears to resemble a kabuto, a samurai helmet.

THE PAPER MODEL
Height: 21.0 cm/8.3 in
Width: 25.4 cm/ 10.0 in
Depth: 28.6 cm/11.3 in
Pages: 10
Pieces: 60 (A4)/61 (Letter)
Level: Medium
Designer: Brandon
Photo: Brandon
NOTES: Build from the head back, closing at the bottom of the back legs. When attaching the 'hair', make one side first, attach it to the double sided tabs that should be glued to each other, and then glue the other side on. And also be careful with the feet, make sure they are level when attaching. Glue the crest directly to the forehead once built.
Also, there are two mouths, one open and one closed. The closed one is the largest, and in the upper right hand corner of the first page. Both of them fit into the same area when building.

Download: A4 / Letter