SNOWSHAWOTT

501 / SNOWSHAWOTT - Pokémon Papercraft
Name: Oshawott
Type: Water
Species: Sea Otter Pokémon
Height: 0.5 m (1′07″)
Weight: 5.9 kg (13.3. lbs.)
Interesting Facts: Look! It snowed! Someone must've built an oshawott snowman! ;) The design is based on a set of plushes that were released for Christmas a few years ago in Japan.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 9.9 cm / 3.9 in
Depth: 10.7 cm / 4.2 in
Pages: 4
Pieces: 23
Level: Easy/Hard (if you decide to build the optional neck round pieces)
Designer: Lyrin
Photo: Lyrin
NOTES: The model is really easy: follow the numbers and you won't have any problem. Pay attention to the mountain/valley folds of the shell, as it's the only challenging piece of the model. The model jumps to hard if you decide to build the round neck pieces, mainly because they are small. They are optional though, and you can either decide to skip them altogether, or to use some cotton balls to obtain the same effect.

Download: A4 / Letter

PANSAGE

511 / PANSAGE - Pokémon Papercraft
Name: Pansage
Type: Grass
Species: Grass Monkey Pokémon
Height: 0.6 m (2′00″)
Weight: 10.5 kg (23.1 lbs.)
Interesting Facts: Pansage is a simian, green-and-cream Pokémon. It has oval, black eyes, large ears with light green insides, and a tiny, black nose. There is a broccoli-like sprout atop its head. In the sprouts foliage are three yellow, tapered seed-like shapes. If eaten, the leaves in this sprout can alleviate exhaustion. Its muzzle, upper body, and skinny forelimbs are cream-colored, and its hands seem to have no fingers, aside from a thumb. Pansage's lower body is green with small feet, and its long tail is tipped with two leaves. Pansage lives in dwells deep in the forest, where it collects berries to share with its friends.

THE PAPER MODEL
Height: 20 cm / 7.9 in
Width: 10 cm / 3.9 in
Depth: 15.9 cm / 6.2 in
Pages: 4 + 1 (stand)
Pieces: 45
Level: Medium
Designer: Lyrin
Photo: Lyrin
NOTES: Follow the numbers on the template while assembling the model, and be sure to refer to the pdo for getting a better idea of how all the parts fit together. Any doubts on how to use a pdo, please read our FAQs section.

Download: A4 / Letter

SHAYMIN SKY FORME CHIBI

492 / SHAYMIN SKY FORME CHIBI - Pokémon Papercraft
Name: Shaymin Sky Chibi
Type: Grass/Flying
Species: Gratitude Pokémon
Height: 0.4 m (1′04″)
Weight: 5.2 kg (11.5 lbs.)
Interesting Facts: Shaymin will change into Sky Forme and back if it touches a Gracidea. Shaymin can't be in this form at night or if it has contact with ice. Shaymin's Sky Forme has a canid-like appearance that also bears some resemblance to a small reindeer. It has a small, slender body. The fur on its back appears to have shifted into a mohawk; it has a red flower petal on the right side of its neck, looking like a scarf or cape, and flat, white ears that look like wings or antlers. It has a small ruff on the front of its neck and a stumpy tail.

THE PAPER MODEL
Height: 7.5 cm / 3.0 in
Width: 11.2 cm / 4.4 in
Depth: 6.1 cm / 2.4 in
Pages: 1
Pieces: 14
Level: Easy
Designer: Lyrin
Photo: Lyrin
NOTES: Follow the numbers on the template, starting from the head and going downward. Follow the .pdo and it wil be an easy build.

Download: A4 / Letter

LEAFEON CHIBI

470 / LEAFEON CHIBI- Pokémon Papercraft

Name: Leafeon
Type: Grass
Species: Verdant Pokémon
Height: 1.0 m (3′03″)
Weight: 25.5 kg (56.2 lbs.)
Interesting Facts: Leafeon is a fox-like creature with plant, dog, and cat characteristics. Its body is tan colored. It has one shade of dark brown that is carried out on the tip of its paws, as its eye color, and in the center of the ear. It has sprouts growing all over it, making it look more like a plant. It has a longer sprout of its forehead. Leafeon ears and tail both share a leaf-like quality. Leafeon can use any attack that Eevee knows with the addition of Grass-type attacks. Its leaves are apparently quite sharp since it can learn Leaf Blade, X-Scissor, and other slicing attacks. As a fully-evolved Pokémon, Leafeon can learn Hyper Beam, and Giga Impact. It can also clean the air around it.

THE PAPER MODEL
Height: 7.5 cm / 3.0 in
Width: 6.6 cm / 2.6 in
Depth: 7.4 cm / 2.9 in
Pages: 1
Pieces: 25
Level: Easy
Designer: Lyrin
Photo: Lyrin
NOTES: Follow the numbers on the template, starting from the head and going downward. Follow the .pdo and it wil be an easy build.

Download: A4 / Letter

JOLTEON CHIBI

35 / JOLTEON CHIBI - Pokémon Papercraft
Name: Jolteon
Type: Electric
Species: Lightning Pokémon
Height: 0.8 m (8′08″)
Weight: 24.5 kg (54.0 lbs.)
Interesting Facts: Jolteon's cells generate a low level of electricity. This power is amplified by the static electricity of its fur, enabling the Pokémon to drop thunderbolts. The bristling fur is made of electrically charged needles. Jolteon is the only Eevee evolution without a tail. Oddly, it can still learn Tail Whip and Iron Tail. It evolves from Eevee via Thunderstone.

THE PAPER MODEL
Height: 7.5 cm/3 in
Width: 6.2 cm /2.4 in
Depth: 6.1 cm/2.4 in
No. of Pages: 1
No. of Pieces: 20
Level: Medium
Designer: Lyrin
Photo: Lyrin
NOTES: Follow the numbers on the template while building. The only pieces that need to be folded are the neck white spikes. Start with the head and close it at the bottom. Build the legs and then go upwards, till you close the body at the "neck". Build the neck fur, then put it in its place and glue the head onto the body, then glue the ears. Glue the remaining yellow fur on the face and butt.

Download: A4 / Letter

UMBREON CHIBI

197 / UMBREON CHIBI - Pokémon Papercraft
Name: Umbreon
Type: Dark
Species: Moonlight Pokémon
Height: 1.0 m (3' 3")
Weight: 27.0 kg (59.5 lbs)
Interesting Facts: When agitated, this Pokémon protects itself by spraying poisonous sweat from its pores. Also, on the night of a full moon, or when it gets excited, the ring patterns on its body glow yellow. It evolves from Eevee by Happiness during the night or when around a Moon Shard.

THE PAPER MODEL
Height: 7.5 cm/3 in
Width: 5.9 cm/2.3 in
Depth: 7.3 cm/2.9 in
No. of Pages: 1
No. of Pieces: 13
Level: Easy
Designer: Lyrin
Photo: Lyrin
NOTES: Start with the head and close it at the bottom. Build the legs and then go upwards, till you close the body at the "neck". Glue the head onto the body, then glue the ears and tail. Follow the numbers on the template.

Download: A4 / Letter

SPHEAL

363 / SPHEAL - Pokémon Papercraft
Name: Spheal
Type: Ice / Water
Species: Clap Pokémon
Height: 0.8 m (2′07″)
Weight: 39.5 kg (87.1 lbs.)
Interesting Facts: Spheals are round, baby seal-like Pokémon. Their plushy fur is a powdered blue color, with several white spots on its back and a beige underside. They have circular eyes, small tusks protruding from their upper jaw, stubby ears, beige flippers and a little flat tail. Curiously, its rounded, spherical appearance makes it bear resemblance to a balloon, or a ball. Spheal always travels by rolling around on its ball-like body, for it is much faster than walking and because its body is poorly shaped for swimming. Despite this, it may dive into the sea, in which case its fur keeps it from feeling cold. When groups of Spheal eat, they all clap at once to show their pleasure. Because of this, their mealtimes are noisy.

THE PAPER MODEL
Height: 12 cm / 4.7 in
Width: 12.4 cm / 4.9 in
Depth: 15.1 cm / 5.9 in
Pages: 3
Pieces: 23
Level: Easy
Designer: Brandon
Photo: Lyrin
NOTES: Build from the bottom up, close at the ears. Notes and diagrams included.

Download: A4 / Letter

PIPLUP

393 / PIPLUP - Pokémon Papercraft

Name: Piplup
Type: Water
Species: Penguin Pokémon
Height: 0.4 m (1′04″)
Weight: 5.2 kg (11.5 lbs.)
Interesting Facts: Piplup have a large sense of self-pride. Because of this, a Piplup has a hard time accepting food from humans, and don't like it when someone tries to help them. Piplup is a poor walker, and often falls down. Its pride, however, makes it puff up its chest without a care. It is a skilled swimmer, diving for over ten minutes to hunt. In the anime, it can sometimes fly short distances, despite penguins not being able to fly.

THE PAPER MODEL
Height: 14 cm/5.5 in
Width: 12.6 cm/ 4.96 in
Depth: 10.2 cm/4 in
Pages: 3
Pieces: 23
Level: Easy
Designer: Brandon
Photo: Lyrin
NOTES: Follow the numbers while building and you'll be fine. When you get to the collar, slide it around Piplup's neck and then close it. Then add the border. And have fun! :)

Download: A4 / Letter

BUIZEL

418 / BUIZEL - Pokémon Papercraft
Name: Buizel
Type: Water
Species: Sea Weasel Pokémon
Height: 0.7 m (2′04″)
Weight: 29.5 kg (65.0 lbs.)
Interesting Facts: Buizel possesses mainly mammalian characteristics with orange fur and paws as well as resembling a realistic cross between a weasel and a sea otter. The collar that is around its neck can be inflated and used as a flotation device when the Pokémon inhales. Buizel also carries characteristics of sea creatures, in that it has two blue fins on its arms and two tails, appearing to be split up, that resembles a fish's fin. Its tail acts as a boat propeller by spinning. There are parallel marks on their cheeks quite similar to those of Furret. Additionally, Buizel has cream-colored paw pads on both its fore- and hind-feet.

THE PAPER MODEL
Height: 18.0 cm/7.0 in
Width: 14.9 cm/ 5.9 in
Depth: 12.2 cm/4.8 in
Pages: 4
Pieces: 46
Level: Medium
Designer: PMF
Photo: Lyrin
NOTES: The model is'n t really difficult: the only challenging parts are the tail (when it becomes a double-tail) and the head fins (mainly because they're small: use tweezers to hold the tabs in their place while they glue, and it'll be simpler). As usual, follow the numbers while building and refer to the pdo when in doubt. Have fun!

Download: A4 / Letter

PIKACHU v2

025 / PIKACHU - Pokémon Papercraft
Name: Pikachu
Type: Electric
Species: Mouse Pokémon
Height: 0.4 m (1'04")
Weight: 6.0 kg (13.2 lbs.)
Interesting Facts: A Pikachu is a short, chubby, ground-dwelling rodent notable for its Electric abilities. Pikachu have short, yellow fur with brown stripes on the back, red cheeks that can produce small jolts of electricity, a mouth that looks like a sideways three, black-tipped ears, along with an unusually shaped tail, resembling a lightning bolt. Besides its evolution and pre-evolution, it may be related to Plusle, Minun, Pachirisu, and Emonga due to notable physical similarities. Pikachu are known to have acute senses of hearing, thanks to their large ears. Most domestic Pikachu are able to understand and interpret human speech at levels far surpassing those of any pet dog.

THE PAPER MODEL
Height: 18.1 cm/7.1 in
Width: 15.2 cm/ 5.9 in
Depth: 16.1 cm/6.3 in
Pages: 5 (pikachu) + 1 (scarf)
Pieces: 43 (male)/45 (female) + 1 (scarf)
Level: Medium
Designer: Brandon/Lyrin - Scarf: PMF
Photo: Lyrin
NOTES: The model isn't difficult, the only tricky parts are the fingers. First thing, start with the thumb and create the five pyramids that compose the fingers. Once you've done it, making the rest of the hand will be really simple. Anyway, refer to the pdo for building them: it'll be even simpler (I've also coloured the finger-parts that need to be glued together with the same colour). As for the rest, follow the numbers on the template and you'll be fine. Once you reach the tail, choose if you want a female or a male Pikachu, and only print the corresponding page. And if you want to build the scarf, there's a close-up picture in the download pack that shows how the knot is done (and also the fingers, so you can use that picture for further reference). Please note that you can use normal printer paper to print out the scarf (it'll be simpler to wrap around pika's neck, in fact), and that there's no need to glue it: it's completely unwrappable and removable. There are also a blue and a red scarf texture in the pack, in case you want to customize your Pikachu (you'll have to change the texture settings in pepakura viewer to use them).

Download: A4 / Letter

Pikachu v1

TEPIG [POKABU] (Chinese New Year 2019)

498 / TEPIG - Pokémon Papercraft
Name: Tepig (Pokabu)
Type: Fire
Species: Fire Pig Pokémon
Height: 0.5 m (1′07″)
Weight: 9.9 kg (22.0 lbs.)
Interesting Facts: Ken Sugimori said that Tepig and its evolutions were meant to evoke a Chinese feel. Its typing and appearance are reminiscent of Zhu Bajie, a pig demon from the Chinese tale, Journey to the West. Tepig evolves into Chaobu starting at level 17, which evolves into Enbuoo starting at level 36.

THE PAPER MODEL
Height: 18.1 cm/7.1 in
Width: 7.5 cm/ 2.9 in
Depth: 17.8 cm/ in
Pages: 4
Pieces: 35
Level: Medium
Designer: Paperpokés Team
Photo: PMF
NOTES: The model is kinda simple to build, the only hard parts are to close the body, but mostly to glue the tail correctly on the body so it stand right.

Start by building the nose and then the rest of the head. You can glue the ears already on the head or wait until the end (it might be easier now). After, build the front legs, the chest and the body (orange pieces) and attach them together. You can now glue the head and the body together. Glue the first big black piece on the body, then build the rear legs and attach them to the black piece. Finish to build the "behind" from the top to the bottom where you can close the model between the legs with the black square piece.

The tail is the hard part to make; not to build but to twist correctly. You'll probably have to force it a little to bend correctly and it might be a good idea to glue the tail to the body at the base and also at the middle of the tail where it roll over the body. You'll also need something to hold it in place while it dries.

Finally, you still have to build the ball and glue it at the tip of the tail. You can use the twist of the tail to make it stand more easily and you'll need something to hold it in place while it dries too.

Download: A4 / Letter

LEAFEON

470 / LEAFEON - Pokémon Papercraft

Name: Leafeon
Type: Grass
Species: Verdant Pokémon
Height: 1.0 m (3′03″)
Weight: 25.5 kg (56.2 lbs.)
Interesting Facts: Leafeon is a fox-like creature with plant, dog, and cat characteristics. Its body is tan colored. It has one shade of dark brown that is carried out on the tip of its paws, as its eye color, and in the center of the ear. It has sprouts growing all over it, making it look more like a plant. It has a longer sprout of its forehead. Leafeon ears and tail both share a leaf-like quality. Leafeon can use any attack that Eevee knows with the addition of Grass-type attacks. Its leaves are apparently quite sharp since it can learn Leaf Blade, X-Scissor, and other slicing attacks. As a fully-evolved Pokémon, Leafeon can learn Hyper Beam, and Giga Impact. It can also clean the air around it.

THE PAPER MODEL
Height: 21.9 cm/8.6 in
Width: 11.6 cm/ 4.5 in
Depth: 19.2 cm/7.5 in
Pages: 5
Pieces: 68
Level: Hard
Designer: Brandon/Lyrin
Photo: Lyrin

NOTES: I won't lie to you, this is the most difficult and detailed PP model that I've built so far, so forget about assembling it without the .pdo reference. Follow the numbers and you'll be fine.

Download: A4 / Letter

MINCCINO

572 / MINCCINO - Pokémon Papercraft

Name: Minccino (Chillarmy)
Type: Normal
Species: Chinchilla Pokémon
Height: 0.4 m (1′04″)
Weight: 5.8 kg (12.8 lbs.)
Interesting Facts: Chillarmy is a furry, white-colored rodent-like Pokémon, sporting scruffs of fur on its head, ear insides, and neck. Chillarmy's large ears, located to the sides of its head, have red insides partly covered by the aforementioned tufts of fur there. Its eyes are large and brown, with a small, dot-like nose. Its limbs are somewhat rounded and small, and its tail is long and particularly furry.

THE PAPER MODEL
Height: 20.0 cm/7.8 in
Width: 23.1 cm/ 9.1 in
Depth: 17.0 cm/6.7 in
Pages: 6
Pieces: 47
Level: Easy
Designer: Lyrin
Photo: Lyrin

NOTES: You'll find the name "Chiramii" sometimes, because the download packs have been made before the name change. Aside from that, the model is quite simple, just follow the numbers on the template and refer to the .pdo for any further reference.
UPDATE: Shiny textures added to the download packs!

Download: A4 / Letter

PIKACHU-COLORED and SPIKY-EARED PICHU

172 / SPIKY-EARED PICHU - Pokémon Papercraft
Name: Pichu
Type: Electric
Species: Tiny Mouse Pokémon
Height: 0.3 m (1′00″)
Weight: 2.0 kg (4.0 lbs.)
Interesting Facts: Spiky-eared Pichu (also known as Notched-ear Pichu) is obtainable in HeartGold/SoulSilver only if you go to the Ilex Forest Shrine whith the special Pikachu-colored Pichu in your team. It'll jump from behind the shrine and join you at level 30, female, with the moves Volt Tackle, Helping Hand, Swagger and Pain Split. If taken to Professor Elm, it is revealed that she has travelled through time with Celebi. He adds that the reason it cannot evolve is because she has been time travelling for so long. He will then call all the Pokémon Center attendants to prevent Spiky-Eared Pichu from being used in trades.

THE PAPER MODEL
Height: 15 cm/5.9 in
Width: 18,7 cm/ 7.4 in
Depth: 11 cm/4.3 in
No. of Pages: 3
No. of Pieces: 27
Level: Medium
Designer: Brandon/Lyrin
Photo: Lyrin
NOTES: The model isn't difficult to build overall. The only challenging parts are the arms and the tiny thumbs. I suggest you to use tweezers for holding the thumbs tabs while they glue. As usual, follow the numbers on the template, and use the .pdo as reference (recommended). The ear-spike is optional: you'll have to build the left ear first, then assemble the spike, fold its tabs inside it, and then glue it on top of the ear. I've included shiny textures even if Spiky-eared Pichu hasn't a shiny version ingame. I did so in case someone wanted to build a simple shiny Pichu (leaving out the ear-spike).

Download: A4 / Letter

172 / Pikachu-colored Pichu - Pokémon Papercraft
Name: Pichu
Type: Electric
Species: Tiny Mouse Pokémon
Height: 0.3 m (1′00″)
Weight: 2.0 kg (4.0 lbs.)
Interesting Facts: Pikachu-colored Pichu is a shiny Pichu that has been given to players who pre-ordered tickets for the 12th Pokémon movie in Japan. It is a male in a Cherish Ball, it's at level 30 while holding an Everstone and a Classic Ribbon. It also knows the moves Charge, Volt Tackle, Endure and Endeavor. In North America it was available for download in GameStop from January 30th to February 14th (D/P/Pt). It is now available to download via wi-fi connection in Europe, America, and Australia (until 26th March). If you go to the Ilex Forest Shrine with him in your party (HeartGold/SoulSilver), you'll be able to get a special Pichu. Which one? COME BACK THIS FRIDAY to download it!

THE PAPER MODEL
Height: 14.4 cm/5.6 in
Width: 17.7 cm/ 6.9 in
Depth: 10.8 cm/4.2 in
No. of Pages: 3
No. of Pieces: 26
Level: Medium
Designer: Brandon/Lyrin
Photo: Lyrin
NOTES: The model isn't difficult to build overall. The only challenging parts are the arms and the tiny thumbs. I suggest you to use tweezers for holding the thumbs tabs while they glue. As usual, follow the numbers on the template, and use the .pdo as reference (recommended). A "normal color" texture is included too: I did so in case someone wanted to build a normal Pichu.

Download: A4 / Letter

MUNCHLAX

446 / MUNCHLAX - Pokémon Papercraft
Name: Munchlax
Type: Normal
Species: Big Eater Pokémon
Height: 0.6 m (2'00")
Weight: 105 kg (231.0 lbs.)
Interesting Facts: Munchlax behaves quite opposite of its evolution, Snorlax, as it is somewhat hyperactive. It is very similar with its eating patterns, however. It does not mind walking and running from place to place as it looks for food. Munchlax tend to store food in its long fur, although it sometimes forgets about its hidden food. It can also eat very many servings of food at a time, and rarely gets full.

THE PAPER MODEL
Height: 15.5 cm/6.1 in
Width: 14 cm/ 5.5 in
Depth: 12.8 cm/5 in
No. of Pages: 5
No. of Pieces: 49
Level: Medium
Designer: Brandon
Photo: Lyrin
NOTES: the model is pretty simple to assemble. The only challenging parts are the fur (spikes) at the bottom, and the hand fingers. Following closely the .pdo for those parts is essential. The model closes at the ears: if you don't want to struggle too much, I suggest you to fold them. Otherwise, go for the smooth look (don't fold them).

Download: A4 / Letter

Mini Pokémon Birthday Cakes

We at Paperpokés,
Have had some birthday cake, yum!
Would you like some too?

Papercake Haiku by Skelekitty

To celebrate the release of all our teams' birthday cakes, we would like to finally share them with you. We hope you enjoy them as much as we have. Just one note to remember, these are all very, very small Pokémon models (~8cm tall - the candle is even smaller!) and they can be extremely difficult and fiddly, but totally worth the effort!

Mini Gengar Cake - A4 / Letter

Mini Squirtle Cake - A4 / Letter

Mini Lapras Cake - A4 / Letter ( Tiramisu)

Mini Nidorino Cake - A4 / Letter ( Oreo Cookie)

Mini Spinda Cake - A4 / Letter ( Crème caramel / Flan )

Mini Bonsly Cake - A4 / Letter ( Choco-Vanilla cake)

Mini Absol Cake - A4 / Letter ( Donuts )
Mini Munchlax Cake - A4 / Letter ( Pancakes w/ Ice cream)

RIOLU

447 / RIOLU - Pokémon Papercraft
Name: Riolu
Type: Fighting
Species: Emanation Pokémon
Height: 0.7 m (2′04″)
Weight: 20.2 kg (44.5 lbs.)
Interesting Facts: Riolu are sensitive to a special type of energy called Aura. Riolu's evolved form, Lucario, can use these waves to attack, or study these waves to predict the movements of their opponents, and use them to track anyone. However, Riolu does not have the ability to fully use these powers, although it can still emanate these waves to communicate and sense them - albeit only in "ripples" as opposed to the "waves" of energy its evolution can sense and guide. Most notably, it cannot learn Aura Sphere or Detect naturally, two moves that Lucario learns that are often attributed to its aura powers. Like almost all Fighting-type Pokémon, Riolu naturally has superhuman strength, stamina, and endurance and is capable of making long journeys on foot in a short amount of time.

THE PAPER MODEL
Height: 19,9 cm/7.8 in
Width: 11,9 cm/ 4.7 in
Depth: 14,3 cm/5.6 in
No. of Pages: 4
No. of Pieces: 49
Level: Medium
Designer: Brandon
Photo: Lyrin
NOTES: This model is pretty straightforward, just follow the numbers on the template while building it. Using the pdo as reference will help a lot. It doesn't stand without a weight inside: I rolled a small scrap piece of paper and glued it inside Riolu's chest (front) in order to make it stand.


Download: A4 / Letter

TORCHIC

255 / TORCHIC - Pokémon Papercraft
Name: Torchic
Type: Fire
Species: Chick Pokémon
Height: 0.4 m (1′04″)
Weight: 2.5 kg (5.5 lbs.)
Interesting Facts: Torchic are small baby birds that are covered in orange and yellow downy feathers. Their wings are underdeveloped and are almost useless aside keeping the Pokémon warm. Their legs and feet however are well developed for running and scratching. They also have a crest on their heads which vaguely resembles a flame. They also possess a flame sac much like other fire Pokémon like Vulpix and Flareon.

THE PAPER MODEL
Height: 16 cm/6.3 in
Width: 8 cm/ 3.14 in
Depth: 11.9 cm/4.7 in
No. of Pages: 3
No. of Pieces: 53
Level: Medium
Designer: Brandon
Photo: Lyrin
NOTES: Follow the numbers on the template in order to build the model. The main body is fairly easy to build, the complicated parts are the wings. I strongly recommend to use the pdo as reference. An alternate solution for the wings is to just use yellow-coloured cotton to make them.

Download: A4 / Letter

GALLADE (Lyrin's Anniversary Model)

475 / GALLADE - Pokémon Papercraft
Name: Gallade
Type: Psychic / Fighting
Species: Blade Pokémon
Height: 1.6 m (5′03″)
Weight: 52 kg (114.6 lbs.)
Interesting Facts: Gallade have a white lower body that consists of bold rounded hips with strong legs. The torso is thin and colored in a balance between the green of its upper body, and the white of its lower body. Sharp red hornlike protrusions stick out of the chest and back similar to Gardevoir. Gallade's arms are shaped like tonfas, with extendable blades in the elbows. His head resembles a gladiator's helmet, with a white face. Like his counterpart Gardevoir, Gallade has spikes on the sides of his face.
Gallade is male-only, evolving from a male Kirlia when exposed to the Dawn Stone.

THE PAPER MODEL
Height: 22 cm/8.66 in
Width: 15.4 cm/ 6 in
Depth: 16.3 cm/6.4 in
No. of Pages: 3
No. of Pieces: 43
Level: Easy / Medium
Designer: Brandon
Photo: Lyrin
NOTES: Build the model following the numbers on the template. This model is really simple to assemble, with the exception of the fingers, which are tiny. In order to glue the crest to the head, first assemble part 40, and glue it on the head. Then assemble part 41, and glue it to both head and part 40. Do not glue parts 40-41 toghether before glueing them to the head, or you'll risk to spill glue onto it.

Download: A4 / Letter

CYNDAQUIL

155 / CYNDAQUIL - Pokémon Papercraft

Name: Cyndaquil
Type: Fire
Species: Fire Mouse Pokémon
Height: 0.5 m (1′08″)
Weight: 7.9 kg (17.4 lbs.)
Interesting Facts: Cyndaquil is a timid Pokémon. It lives in groups and tends to hide in dangerous situations. Its fur is bluish on top of its body, but a milky color on the underside. Although called the Fire Mouse Pokémon, Cyndaquil seems to be a composite of features from the echidna, seen in the flames erupting from its back, and the shrew, the general shape of its body. Its eyes are often closed, as it is still young. It has four spots from which its flames erupt. It lacks claws on its forelimbs, but has a single claw on each hind foot.

THE PAPER MODEL
Height: 18 cm/7.08 in
Width: 21 cm/ 8.26 in
Depth: 16.9 cm/6.65 in
No. of Pages: 6
No. of Pieces: 38
Level: Hard
Designer: Brandon
Photo: Lyrin
NOTES: If you plan on building Cyndaquil without flames, it'll be a Medium difficulty level craft.

Follow the numbers on the template to assemble the model. First build and asssemble the flames, then leave them aside and start building the main body (starting from the feet). Once you've glued piece 24, glue the flames to the body, and then glue piece 25 around them. This is the hardest part in the model.

To make Cyndaquil stand, you'll have to add a little weight inside it, in correspondence of its mouth.

Download: A4 / Letter