LUCARIO

448 / Lucario- Pokémon Papercraft
Name: Lucario
Type: Fighting/Steel
Species: Aura Pokémon
Height: 1.2 m (3'11")
Weight: 54.0 kg (119.0 lbs)
Interesting Facts: Lucario is considered to be prideful, and is extremely loyal to its Trainer. It also seems to have a natural sense of justice. It usually live deep in mountains very far from people to improve their skills. It is an exceptionally rare Pokémon. Though its diet is unknown, one Lucario was seen eating Berries and plants, like roses. It has been seen eating chocolate, without ill-effects from the theobromine, even though chocolate is not part of its natural diet.

THE PAPER MODEL
Height: 27.8 cm/ 10.9 in
Width: 19.4 cm/ 7.6 in
Depth: 20.0 cm/ 7.9 in
No. of Pages: 7
Level: Hard
Designer: Brandon
Photo: LuIS
NOTES:  Start at the ears and build the head around them. When you reach the neck, first glue piece 15 to 16 and only after the last piece to the head. Glue the appendages of the head before going any further, same for the fur. Shape the fur at will, give it style. Only glue the shoulders to the body AFTER the torso is built and apply pressure from the inside. The arms are built from the paws up. The paws can get complicated, just build them by numbers and you'll be fine. Close the body at pieces 85 and 88. The legs are built from the toes up, glue them directly to the body, making sure it's stable. Refer to the colored tabs when gluing the shoulder.

In order to use the Brawl Textures, you'll have to use Pepakura/the PDO. Shiny and Normal pdfs are included in the packs per usual.

Download: A4 / Letter - Brawl Texture Pack

CRYOGONAL

615 / CRYOGONAL - Pokémon Papercraft

Name: Cryogonal
Type: Ice
Species: CrystallizingPokémon
Height: 1.1 m (3′07″)
Weight: 148.0 kg (326.3 lbs.)
Interesting Facts: Cryogonal resembles a shiny, blue hexagonal snowflake. Its facial expression is frozen, which leaves Cryogonal with a still, aggressive-looking face. Two cracks run through its face, the upper opening contains its eyes and the lower serves as a mouth. It has two glowing eyes and its large mouth contains an extendable chain of ice, which is used for hunting. When its body heat rises it will turn into steam and vanish, but will revert back to ice when the body temperature lowers. Cryogonal is born in snow clouds.

THE PAPER MODEL
Height: 13.0 cm/ 5.1 in
Width: 12.6 cm/ 5.0 in
Depth: 2.5 cm/ 1.0 in
Pages: 2
Pieces: 26
Level: Easy
Designer: PODragon
Photo: LuIS
NOTES: Start at the eyes and build by numbers around it. Glue the appendages as soon as the numbers get to them. Close at the back.

Download: A4 / Letter

SAWSBUCK W (Merry Christmas!)

586 / SAWSBUCK W- Pokémon Papercraft

Name: Sawsbuck
Type: Normal/Grass
Species: Season Pokémon
Height: 1.9 m (6′03″)
Weight: 92.5 kg (203.9 lbs.)
Interesting Facts: Sawsbuck is a brown and cream deer-like Pokémon with rhomboid ears and darker ear insides. Its eyes have light-orange markings that curve down to sides of its face. It has a dark-brown nose, and it sports cream fur on its chin and sides of its face. Light-orange stripes rim its underbelly, and its back is decorated with spots corresponding to the season: pink in spring, green in summer, orange in fall, and white in winter. Its limbs are slender and tipped with hooves. Unless it's summer, its brown tail points down. Sawsbuck lives in herds led by the Sawsbuck with the most splendid antlers. It can live almost anywhere as they adapt to the season, but prefer to live away from humans. It is herbivorous.

THE PAPER MODEL
Height: 19.8 cm/ 7.8 in
Width: 18.1 cm/ 7.1 in
Depth: 14.9 cm/ 5.9 in
Pages: 3
Pieces: 65
Level: Medium/Hard
Designer: PODragon
Photo: LuIS
NOTES: Start at the nose, building the head around it. Build the fur and the antlers, but only glue the antlers to the head AFTER the fur is glued. Build the legs from the hooves up. Glue the cufs to the indicated tabs after the hoovers are glued. Close at the back and glue the tail after. It can take some weight to stand, a coin placed on the back should do.

Download: A4 / Letter

GROVYLE

253 / Grovyle- Pokémon Papercraft
Name: Grovyle
Type: Grass
Species: Wood Gecko Pokémon
Height: 0.9 m (2'11")
Weight: 21.6 kg (47.6 lbs)
Interesting Facts: In the manga: The Treecko meant to be handed to Emerald was recovered by Wally and became a Grovyle to rescue his temporary owner when a wild Dusclops threatened to suck them into its infinite cavity. After a few more weeks of training at the Sky Pillar under Norman, it was able to awaken the ancient legendary Pokémon Rayquaza, but the huge gust of wind sent it flying miles away into a distant island where it evolved again to a Sceptile and was this time caught by Guile Hideout, who smuggled it into the Battle Factory to try to drive the nosy press away. It ended up being stolen by its legitimate owner, Emerald, and became a fixed member of his team.

THE PAPER MODEL
Height: 17.2 cm/ 6.8 in
Width: 18.5 cm/ 7.3 in
Depth: 18.1 cm/ 7.1 in
No. of Pages: 4
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: Start from the top of the head, working your way down. Attach the leaves when possible. Layer the leaves similar to the build picture, using it as reference if you can't use the pdo. Close at the feet.

Download: A4 / Letter

COFAGRIGUS (Happy Halloween!)

563 / Cofagrigus- Pokémon Papercraft
Name: Cofagrigus
Type: Ghost
Species: Coffin Pokémon
Height: 1.7 m (5'07")
Weight: 76.5 kg (168.7 lbs)
Interesting Facts: Cofagrigus is a blue and yellow sarcophagus with red, menacing eyes and four ebony hands that appear to be shadows. A simply designed face is prominent on the "forehead" of the Pokémon. Its real face is covered up by parts that slide out of the way when it is active. White, sharp fangs create a taunting smile and flamboyant patterns veil the coffin. The coffin is said to be made of gold. Ancient legends once told Cofagrigus could eat nearby humans and turn their lifeless bodies into mummies. It lives in tombs and ruins.

THE PAPER MODEL
Height: 25.2 cm/ 9.9 in
Width: 30.7 cm/ 12.1 in
Depth: 19.8 cm/ 7.8 in
No. of Pages: 8
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES:  The model itself is not hard, the arms are big and easy to build. Start at the top of the coffin, glue the details as soon as possible and close at the bottom. More detailed instructions are included on the template. Make sure to follow the instructions, specially around the top of the head. Reinforcing the inside is important, since the arms are heavy and you should reinforce the arms (especially the lower ones). You can also use wire to support the arms from the inside, just poke a hole where the arm will go and pass the wire through that hole, with a length that will go to hand of the other arm. Glue the wire to the body (I used superglue) and insert the arms after, gluing them to the body.

Download: A4 / Letter

GOOMY (Happy Halloween!)

704 / Goomy - Pokémon Papercraft
Name: Goomy
Type: Dragon
Species: Soft Tissue Pokémon
Height: 0.3 m (1'00")
Weight: 2.8 kg (6.2 lbs)
Interesting Facts: Goomy is widely considered the weakest Dragon-type Pokémon. It hides in damp and shady places, such as swamps, to prevent its slimy body from drying out.

THE PAPER MODEL
Height: 13.5 cm/ 5.3 in
Width: 11.1 cm/ 4.4 in
Depth: 15.5 cm/ 6.1 in
No. of Pages: 3
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES:  Use a pen or pencil to curl the body pieces to give it a round shape. Start at the top of the head. Be careful with the antennae, they're the hardest part of the model. Glue the antennae before closing at the bottom.

Download: A4 / Letter

YAMASK

562 / Yamask- Pokémon Papercraft
Name: Yamask
Type: Ghost
Species: Spirit Pokémon
Height: 0.5 m (1'08")
Weight: 1.5 kg (3.3 lbs)
Interesting Facts: Due to being a human long ago, it has memories of being a human. If someone wears the mask Yamask carries, they will become possessed by the Yamask in question. Sometimes, it looks at this mask and cries, apparently in longing. Yamask is known to wander the ruins of ancient civilizations.

THE PAPER MODEL
Height: 16.4 cm/ 6.5 in
Width: 18.1 cm/ 7.1 in
Depth: 8.9 cm/ 3.5 in
No. of Pages: 2
Level: Easy/Medium
Designer: Brandon
Photo: LuIS
NOTES:  The model is fairly simple, just start at the nose and work by the numbers. It can get tricky close to the tail, so following the numbers there is important. You can glue it to the base or use magnets to make it stand there, further instructions on the pdo. Even with the base it can have problems standing, a coin inside the base is enough, but if you're using magnets to hold it, it probably won't be necessary.

Download: A4 / Letter

KROOKODILE

553 / Krookodile - Pokémon Papercraft
Name: Krookodile
Type: Ground/Dark
Species: Intimidation Pokémon
Height: 1.5 m (4'11")
Weight: 96.3 kg (212.3 lbs)
Interesting Facts: Krookodile has a thick maroon-colored body, black back, and white stomach. It has five triangular spikes on its back: four around the middle of its back, and one large one at the beginning of its tail. Each of the smaller spikes on its back are linked to black, triangular spikes that reach around to its front, slightly overlapping its white stomach. The largest spike sits at the beginning of its long thick tail, which has three, thick, black stripes. The last stripe covers the tip of the tail. Its legs are very short and directly attached to its feet. The feet are wrapped in black and have three white claws facing forward. Krookodile's arms are short and thin with a black stripe around the elbow. Its long, thin fingers are each tipped with a white claw.

THE PAPER MODEL
Height: 18.0 cm/ 7.1 in
Width: 25.4 cm/ 10.0 in
Depth: 21.5 cm/ 8.5 in
No. of Pages: 7
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: Start from the snout, and work your way into the head and down. Attach the arms as soon as possible (as indicated by the numbering). Be careful with the claws, they're the toughest part of the model. Build the body down to the tail. Build the tail back to the tip, and then close at the feet.

Download: A4 / Letter

ZAPDOS

145 / Zapdos - Pokémon Papercraft
Name: Zapdos
Type: Electric/Flying
Species: Electric Pokémon
Height: 1.6 m (5'03")
Weight: 52.6 kg (116.0 lbs)
Interesting Facts: When Zapdos flaps its glittering wings, it releases electricity that can potentially cause thunderstorms. It causes cause massive crackling and snapping sounds when it flies; these are attributed to the lightning bolts sheds when airborne. When stricken by lightning, it gains power. Zapdos reportedly appears only during thunderstorms, and is said to live among thunderclouds. However, it is rarely seen.

THE PAPER MODEL
Height: 25.9 cm/ 10.2 in
Width: 27.8 cm/ 10.9 in
Depth: 15.4 cm/ 6.1 in
No. of Pages: 8
Level: Medium-Hard
Designer: Brandon
Photo: Skeleman
NOTES: First off- be sure to fold all the sharp folds! This includes the wings, beak, legs and 'head spikes' in particular.
Start with the halo of spikes around the face, and work inward towards the beak. Be very careful with the beak in particular, it's very small and easy to mess up. Then start to work down the back of the head, and attach the first set of Yellow Wings as soon as possible. Keep working down the body, and attach the second set of back, Black Wings once the body can support them. Same goes with the feet- be sure to attach the yellow 'leg caps' before attaching the feet+brown fur overtop of the caps. Close at the bottom with the 'skirt', being sure to attach the main yellow piece, then the inverted yellow piece to match it inside, and repeat with the black pieces.
Two different 'bolt' patterns included for the base. Feel free to mix and match textures for the base in the pdo! Stony textures also work especially well.
Edge ID files also included for reference.

Download: A4 / Letter

MEWTWO

150 / Mewtwo - Pokémon Papercraft
Name: Mewtwo
Type: Psychic
Species: Genetic Pokémon
Height: 2.0 m (6'07")
Weight: 122.0 kg (269.0 lbs)
Interesting Facts: Mewtwo is one of the first Pokémon created by science. It is a bipedal, humanoid creature with some feline feature. It is primarily gray with a long purple tail. On top of its head are two short, blunt horns, and it has purple eyes. There is a tube that extends from the back of its skull to the top of its spine, bypassing its neck. It has a defined chest and shoulders, which resemble a breastplate. The three digits on each hand and foot have spherical tips. Its tail is thick at the base, but thins before ending in a small bulb.

THE PAPER MODEL
Height: 18.7 cm/ 7.4 in
Width: 20.7 cm/ 8.1 in
Depth: 12.1 cm/ 4.8 in
No. of Pages: 4
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start at the ears and work down, closing at the tip of the tail. Glue the arms and the feet details when the numbers get to them. It's quite unstable, some weight inside the feet will help it stand properly.

Download: A4 / Letter

VICTREEBEL

071 / VICTREEBEL - Pokémon Papercraft

Name: Victreebel
Type: Grass/Poison
Species: Flycatcher Pokémon
Height: 1.7 m (5′07″)
Weight: 15.5 kg (34.2 lbs.)
Interesting Facts: It can be found in small groups and is territorial. In the manga, Victreebel has been shown to horde food, usually small birds and rodents, and collect Leaf Stones to perform evolution rituals at night to help Weepinbell become more Victreebel. Victreebel lives in forests, as well as tropical jungles.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 17.7 cm/ 7.0 in
Depth: 22.8 cm/ 9.0 in
Pages: 5
Pieces: 42
Level: Medium
Designer: PODragon
Photo: Olber
NOTES: Build from the mouth down, attach the teeth and eyes as you go. Once the body is done, make the leaves and glue them on. Use the 'stem' that branches off from the biggest, upper leaf to help balance the model.

Download: A4 / Letter

LINOONE

264 / Linoone - Pokémon Papercraft
Name: Linoone
Type: Normal
Species: Rushing Pokémon
Height: 0.5 m (1'08")
Weight: 32.5 kg (71.6 lbs)
Interesting Facts: Linoone can run up to 60 mph, but has to stop before it can make a turn. It often fails to catch prey due to only being able to run in a straight line. When it sees prey underwater in ponds, it leaps in and uses its sharp claws to catch the prey. As shown in the anime, Linoone has an attraction to anything round, and will grab any orb-shaped object it sees if given the chance. It often carries a snatched object in its expandable cheek pouches and deposits it in any of a number of secret stashes it keep on its territory. Linoone tends to live in grasslands.

THE PAPER MODEL
Height: 25.0 cm/ 9.8 in
Width: 13.8 cm/ 5.4 in
Depth: 32.4 cm/ 12.8 in
No. of Pages: 7
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Build normally until reaching piece 10. At piece 10, fold the colored tabs outward- these will attach to the corresponding colored tabs on pieces 11, 13, and 17. When it comes to attaching those parts, be sure to fold the colored tabs there outward as well, and glue them to the other same-colored tabs. These form the connection where parts 21-24 attach, which are also color coded. This is probably the trickiest build part to follow, but easy once you get the parts matched up correctly. After this, simply keep building from the head down, attaching the tail when possible, then the legs, then the belly and close at the bottom.

Download: A4 / Letter

DRUDDIGON

621 / Druddigon - Pokémon Papercraft
Name: Druddigon
Type: Dragon
Species: Cave Pokémon
Height: 1.6 m (5'03")
Weight: 139.0 kg (306.4 lbs)
Interesting Facts: Druddigon's bright red head is very hard, being harder than rock and very rough. It can take in sunlight with its wings; if its body temperature lowers, it becomes immobile. It has savage physical strength.

THE PAPER MODEL
Height: 19.0 cm/ 7.5 in
Width: 21.3 cm/ 8.4 in
Depth: 23.2 cm/ 9.1 in
No. of Pages: 6
Level: Hard
Designer: Brandon
Photo: LuIS
NOTES: The model is built into two segments: head and body. Start the head at the top and close at the bottom. Be carefull, it's the hardest part of the model. The mouth connection can be tricky too. The body starts at the tail and close at the neck. Glue the spikes as you go. The wings are tricky too, instructions on how to build them (and some other instructions too) are included on the template. Before closing, glue the wings to the body and add some weight untill it stands.

Download: A4 / Letter

WEEDLE

013 / WEEDLE - Pokémon Papercraft
Name: Weedle
Type: Bug/Poison
Species: Hairy Bug Pokémon
Height: 0.3 m (1′00″)
Weight: 3.2 kg (7.1 lbs.)
Interesting Facts: Challenge of the Samurai, Ash was very close to catching a Weedle. He used his newly caught Pidgeotto to battle, Weedle was knocked unconscious and when Ash was about to throw his Poké Ball, Samurai came up and asked Ash if he was a Trainer from Pallet Town. This distracted Ash from catching the Weedle, so it got away. This same Weedle later warned its kind and together, they tried to avenge its near capture by attacking his friends.

THE PAPER MODEL
Height: 15.0 cm / 5.9 in
Width: 7.8 cm / 3.1 in
Depth: 16.1 cm / 6.3 in
Pages: 3
Pieces: 29
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from the horn back, being careful with the footpads. Close at the tail piece. Be sure to attach the footpads and other separate parts along the way. Tack on the tail when the body is done. Follow the numbers for any additional help.

Download: A4 / Letter

KAKUNA

014 / KAKUNA - Pokémon Papercraft
Name: Kakuna
Type: Bug/Poison
Species: Cocoon Pokémon
Height: 0.6 m (2′00″)
Weight: 10.0 kg (22.0 lbs.)
Interesting Facts: Kakuna remains virtually immobile and waits for evolution often hanging from tree branches by long strands of silk. When attacked, however, it can extend its poison barbs. Kakuna nests in forests and misty wooded areas. Occasionally, it will also nest at the mouths of tunnels and caves as seen in Pokémon Snap.

THE PAPER MODEL
Height: 13.6 cm / 5.4 in
Width: 7.8 cm / 3.1 in
Depth: 7.6 cm / 3 in
Pages: 3
Pieces: 19
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from the top down, being careful with the thinner 'ridges'. Close at the bottom piece. Be sure the segmented parts attach in the correct order. Follow the colored markings for connecting the separate body segments. Attach pieces 18-19 to the body at the end. If you want to hang Kakuna up, attach a string in between pieces 1 and 2, to give a 'stringshot' effect.

Download: A4 / Letter

MAMOSWINE

473 / Mamoswine - Pokémon Papercraft
Name: Mamoswine
Type: Ice/Ground
Species: Twin Tusk Pokémon
Height: 2.5 m (8'02")
Weight: 291.0 kg (641.5 lbs)
Interesting Facts: Mamoswine are incredibly strong. Their sturdy body and feet enable them to cross even the most dense and dry snow. Mamoswine are able to endure harsh cold and hunger for an almost indefinite amount of time, as indicated by a ten-thousand-year-old specimen waking up, much to the amazement of those who discovered it.

THE PAPER MODEL
Height: 15.0 cm/ 5.9 in
Width: 14.5 cm/ 5.7 in
Depth: 24.0 cm/ 9.5 in
No. of Pages: 6
Level: Easy/Medium
Designer: Brandon
Photo: LuIS
NOTES: Start at the front of the head, close at the back legs. Attach the face and tusks using the texture shadows and picture as reference. Refer to part numbers for any additional help. Try to apply pressure from the inside when attaching parts to the body.

Download: A4 / Letter

GABITE

444 / Gabite - Pokémon Papercraft
Name: Gabite
Type: Dragon/Ground
Species: Cave Pokémon
Height: 1.4 m (4'07")
Weight: 56.0 kg (123.5 lbs)
Interesting Facts: Gabite are fierce and predatory dragons, known for their scales that have medicinal properties and can heal most illnesses. Gabite have short, yet deadly sharp teeth, like their pre-evolution, Gible. They have been known to move at extreme speeds.

THE PAPER MODEL
Height: 17.5 cm/ 6.9 in
Width: 16.9 cm/ 6.7 in
Depth: 19.9 cm/ 7.8 in
No. of Pages: 4
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start at the top of the head, close at the foot, following the numbers. Attach the jets on the head whenever possible, as well as claws as you go.

Download: A4 / Letter

Updates & Changes

So, as I'm sure a few of you noticed, we had a bit of down time for a few days last week. We've got it all fixed up now, and we're working on fixing the aftermath of it all, which really just boils down to a few images not working on the site anymore. Simple, minor stuff, and easy to fix.
In addition to addressing all of this, you'll be seeing a few other changes around the site here soon too- we're going to try and get a few more models out than the usual crawl you've hopefully not gotten used to lately, along with a bit of help to do so. Just be on the lookout for these changes soon!

PARAS

046 / Paras - Pokémon Papercraft
Name: Paras
Type: Bug/Grass
Species: Mushroom Pokémon
Height: 0.3 m (1'00")
Weight: 5.4 kg (11.9 lbs)
Interesting Facts: Though tochukaso are parasitic in nature, Paras manages to make use of the mushrooms by creating a semi-symbiotic relationship; the mushrooms draw their nutrients from the host Paras's body in order to grow, and Paras is able to use the mushrooms spores along with its own pincers for self-defense.

THE PAPER MODEL
Height: 10.3 cm/ 4.1 in
Width: 15.4 cm/ 6.1 in
Depth: 13.1 cm/ 5.2 in
No. of Pages: 4
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Start at the 'nose', attaching the parts as numbered. It's best to attach in this order so that you can put pressure from the inside to make the pieces set onto the body. Attach the mushroom staulks onto the body before the head of the mushroom. Use the front claws of the body in order to get Paras to stand. Close at the back of the body.

Download: A4 / Letter

SABLEYE

302 / Sableye - Pokémon Papercraft
Name: Sableye
Type: Dark/Ghost
Species: Darkness Pokémon
Height: 0.5 m (1'08")
Weight: 11.0 kg (24.3 lbs)
Interesting Facts: Sableye are very diminutive hominid-like creatures with dark purple bodies. Their bodies are adapted for cave life as they are flexible enough to fit into small crevices while being tough enough to survive cave-ins. Their most distinguishing features are their gemstone-like eyes, which allow them to see in very little light. They have gemstones on their chests which grow as a result of its crystal and mineral diet. They are able to feed on such hard foods because of their sharp razor teeth, which are designed to crunch up rocks.

THE PAPER MODEL
Height: 16.0 cm/ 6.3 in
Width: 10.3 cm/ 4.1 in
Depth: 11.0 cm/ 4.3 in
No. of Pages: 3
Level: Medium-Hard
Designer: PODragon
Photo: LuIS
NOTES: Start at the top of the head, close at the bottom. Attach the gems when building the back. Refer to part numbers for any additional help. Alternate 'diamond' eyes and open mouth textures are included in pack for use with PDO. Build picture shown with alternate textures.

Download: A4 / Letter

LUGIA (SHADOW)

249 / Shadow Lugia - Pokémon Papercraft
Name: Lugia
Type: Psychic/Flying
Species: Diving Pokémon
Height: 5.2 m (17'01")
Weight: 216.0 kg (476.2 lbs)
Interesting Facts: Lugia is the version mascot of Pokémon Silver, its remake Pokémon SoulSilver, and Pokémon XD: Gale of Darkness, appearing on the boxart of them all. In Pokémon XD, Shadow Lugia, codenamed XD001, is a main part of the storyline, and Cipher's ultimate Shadow Pokémon.

THE PAPER MODEL
Height: 21.8 cm/ 8.6 in
Width: 31.1 cm/ 12.2 in
Depth: 26.1 cm/ 10.3 in
No. of Pages: 9
Level: Hard
Designer: LuIS & Brandon
Photo: LuIS
NOTES: Instructions included. Only print the parts needed for building (Pages 2-10), excluding the last page for Shadow Lugia or Lugia, as they're used for the opposite one. Packs included for both.
Be sure to enforce the joints of the legs and wings, as they're the weaker points of the mode (and could collapse otherwise).

Download: Shadow Lugia A4 / Shadow Lugia Letter   -    Lugia (Mirrored) A4 / Lugia (Mirrored) Letter

WOOPER

194 / Wooper - Pokémon Papercraft
Name: Wooper
Type: Water/Ground
Species: Water Fish Pokémon
Height: 0.4 m (1'04")
Weight: 8.5 kg (18.7 lbs)
Interesting Facts: Wooper is a mostly blue amphibious Pokémon that bears a resemblance to a real-life salamander known as an axolotl. Wooper stands upright on its small, round feet, and has a large, thick tail. Wooper also has purple-colored, branching gills coming out of the sides of its head, and what look like dark blue, curved gill-like markings on its torso. Wooper's head is large compared to its body, its mouth is wide and its eyes are small, round, and black in coloration.

THE PAPER MODEL
Height: 14.5 cm/ 2.8 in
Width: 14.5 cm/ 6.6 in
Depth: 13.2 cm/ 8.3 in
No. of Pages: 3
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start at the top of the head, close at the bottom. Attach the tail when possible, applying pressure from the inside to be sure it attaches. Glue on the feet once the body/feet are completed, being sure the model stands.

Download: A4 / Letter

BEAUTY & THE BEAST

??? / BEAUTY AND THE BEAST - Disney Papercraft
Name: Belle and Adam
Type: FairyTale Romancers
Species: Human/Beast
Height: Varied
Weight: Average
Interesting Facts: In Disney's variant of the tale, the Beast originally appeared to be constantly angry, depressed, and spoiled. As opposed to his original counterpart, the creators gave him a more primal nature to his personality, which truly exploited his character as an untamed animal.
Belle is a very attractive 17-year old young woman. Although she is known throughout her village for her beauty, she is quite ignorant of her own appearance, but ironically greatly aware that her fellow citizens think of her as "odd" and "peculiar".

THE PAPER MODELS (Both)
Height: 40.0 cm/ 15.7 in
Width: 37.1 cm/ 14.6 in
Depth: 30.6 cm/ 12.0 in
No. of Pages: 10 (Belle), 15 (Beast)
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: These are both fairly tough models, and the templates are not numbered. An edge ID pdf is included to help those who can't use the pdo, but using the pdo is strongly advised. Considerable experience is advised as well.

For Belle, build from the hair down, attaching the arms as you go. Once you get past the waist, everything gets exponentially easier. Just be careful and take your time with everything above it. Close at the bottom of the skirt and attach the legs with a bit of glue and pressure.

For Adam, take a similar approach- start from the horns down, taking special care with the face and collar. Close at the end of the pant leg, and attach the legs with glue/pressure. Be sure to re-enforce the tail quite a bit, as it's the biggest weak point. It is also advised to put weight in the tail to help him stand, yet another reason to re-enforce the connection to the body/tail.

Download: A4

TIMON

??? / TIMON- Disney Papercraft
Name: Timon
Type: Obnoxious
Species: Meerkat
Height: Short
Weight: Lithe
Interesting Facts: Timon Berkowitz can be rather selfish and thoughtless at times, but in the end, he has a good heart and is loyal to his friends. Unlike most meerkats, who work constantly, Timon is a lazy daydreamer which results in him being cast out of his colony. His status at the bottom of the food chain means he relies on stronger animals to protect him once he's on his own, and as such he usually looks out for himself, but nonetheless he never abandons his friends in times of trouble and is willing to risk himself for them.

THE PAPER MODEL
Height: 20.0 cm/ 7.9 in
Width: 12.4 cm/ 4.9 in
Depth: 14.1 cm/ 5.6 in
No. of Pages: 4
Level: Medium-Hard
Designer: Brandon
Photo: Brandon
NOTES: Start at the head, working down and attaching arms/legs/tail as you go. The unnumbered parts just glue on the outside, so attach those whenever you see fit. Numbers on template.

Download: A4 / Letter

DRATINI V2

147 / DRATINI v2- Pokémon Papercraft
Name: Dratini
Type: Dragon
Species: Dragon Pokémon
Height: 1.8 m (5'11")
Weight: 3.3 kg (7.3 lbs)
Interesting Facts: Dratini are timid, elusive, and extremely shy Pokémon, and thus are rarely seen, resulting in the belief that they are mythological among certain communities in Kanto.

THE PAPER MODEL
Height: 14.5 cm/ 5.7 in
Width: 10.8 cm/ 4.3 in
Depth: 16.1 cm/ 6.3 in
No. of Pages: 2
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the head and close at the tail. Be careful with the head wings, and attach them before continuing past the head. Further instructions on the template.

Download: A4 / Letter

GOLDUCK

055 / GOLDUCK - Pokémon Papercraft
Name: Golduck
Type: Water
Species: Duck Pokémon
Height: 1.7 m (5'07")
Weight: 76.6 kg (168.9 lbs)
Interesting Facts: It has been noted that Golduck will often join swimmers when training. They are sometimes found rescuing people lost at sea from danger, their heads shimmering from the telekinetic powers that allow them do so. The headaches that ridiculed its Basic evolution form, Psyduck, don’t trouble Golduck, allowing them to have full use of their formidable mental powers.

THE PAPER MODEL
Height: 17.3 cm/ 6.8 in
Width: 20.3 cm/ 8.0 in
Depth: 21.8 cm/ 8.6 in
No. of Pages: 5
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start at the head and close at the tail. Be careful with the head spikes and the hands and feet, the webbed details can be glued by a drop of glue on the sides or superglue. Further instructions on the template.

Download: A4 / Letter

DUNSPARCE

206 / DUNSPARCE - Pokémon Papercraft
Name: Dunsparce
Type: Normal
Species: Land Snake Pokémon
Height: 1.5 m (4'11")
Weight: 14.0 kg (30.9 lbs)
Interesting Facts: At first glance, these Pokémon appear plain. However, Dunsparce make themselves quite elusive. They also are able to dig extremely well and fly a little using their small wings. Dunsparce are extremely shy of human beings and rarely ever make themselves known. However, they are known to swarm on random occasions.

THE PAPER MODEL
Height: 7.2 cm/ 2.8 in
Width: 16.7 cm/ 6.6 in
Depth: 21.0 cm/ 8.3 in
No. of Pages: 2
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the mouth and close at the tip of the tail. Glue the wings and spikes under the mouth as soon as the numbers indicate, so you can apply presure from the inside.

Download: A4 / Letter

ANORITH

347 / ANORITH - Pokémon Papercraft
Name: Anorith
Type: Rock/Bug
Species: Old Shrimp Pokémon
Height: 0.7 m (2' 04")
Weight: 12.5 kg (27.6 lbs)
Interesting Facts: Anorith is an aquatic, arthropod-like, greenish-gray Pokémon that uses the eight flexible, white-and-red appendages on both sides of its body to propel itself through the water. Its large head has two large, beady eyes extending from the side, and in the middle of the head is a round black pattern with two red spots. Two large, segmented claws protrude from below its head, serving as either defense against predators or a weapon against prey. These claws seem to have become the Fossil that Anorith can be resurrected from. Anorith’s carapace is gray, and its tail is small with two gray spikes. Its mouth is on the underside of its body, and resembles a screw in shape.

THE PAPER MODEL
Height: 5.7 cm/ 2.2 in
Width: 17.2 cm/ 6.8 in
Depth: 16.0 cm/ 6.3 in
No. of Pages: 2
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: The model is built into two segments: head and body. Build the head starting at the front and closing at the back. Add the details before closing. Start the body from the back to the front, closing where it connects to the head. Glue each wing at one tab. Join the head and the body after they are closed and all the details are glued. Further instructions on the template.

Download: A4 / Letter

ESPEON v2: Mini

196 / ESPEONv2 Mini - Pokémon Papercraft

Name: Espeon
Type: Psychic
Species: Sun Pokémon
Height: 0.9 m (2′11″)
Weight: 26.5 kg (58.4 lbs.)
Interesting Facts: Espeon are very loyal to their trainers and will protect them from harm. They enjoy basking in full sunlight. They are also able to read air currents allowing it to predict the future as well as its opponents' next moves. It evolves from Eevee via Happiness during the day, or when around a Sun Shard. As a shiny, its fur is a desirable bright-green.

THE PAPER MODEL
Height: 8.1 cm/ 3.2 in
Width: 9.7 cm/ 3.8 in
Depth: 6.9 cm/ 2.7 in
Pages: 1
Pieces: 34
Level: Medium
Designer: PODragon
Photo: PODragon
NOTES: The minee-veelutions have turned into a mini-series! Enjoy glaceon, whose biggest complaint is in the small, dainty paws.
Build as you would with umbreon and glaceon; build the legs first, attaching them as you build the body (starting at the head). Begin with ears, build around that from the face on down, and close at the hind end. add whiskers and tail, and done! (She may have some small standing issues. I adjusted it slightly since building, so hopefully that fixes it.)

Download: A4 / Letter

Espeon v1

BEEDRILL (Happy Valentine's!)

015 / BEEDRILL - Pokémon Papercraft

Name: Beedrill
Type: Bug/Poison
Species: Poison Bee Pokémon
Height: 1.0 m (3′03″)
Weight: 29.5 kg (65.0 lbs.)
Interesting Facts: They have incredibly painful stings and move extremely fast. It is able to fire its stinger as a projectile and regenerate it. They chase after intruders relentlessly in a swarm. Prior to Pokémon Black and White, it was the only known Pokémon to learn Twineedle by level up.

THE PAPER MODEL
Height: 17.7 cm/ 7.0 in
Width: 24.2 cm/ 9.5 in
Depth: 15.4 cm/ 6.1 in
Pages: 6
Pieces: 49
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: You can build the head (regular numbers), arms (AR*/AL* for Right and Left arms), legs (L*/R* for Left and Right), Body (B*) and wings in any order and combine them all when each is complete. When building the arms, build the wiry blue parts first and plop them onto the end of the drill with a bit of glue. It's useful to use a small dab of glue inside the arms too, to reinforce it a little.
The legs are pretty straight forward, just connect the rings in that order. Close the head near the neck, and the body near the same point- they will glue together there, so any mistakes closing can be sealed between the head/body. Other than that, just be generally careful with the thin parts.

Download: A4 / Letter

EXCADRILL

530 / EXCADRILL - Pokémon Papercraft
Name: Excadrill
Type: Ground/Steel
Species: Subterrene Pokémon
Height: 0.7 m (2' 04")
Weight: 40.4 kg (89.1 lbs)
Interesting Facts: Excadrill is a dark-colored, bipedal mole-like Pokémon. It has a tapered, pink-tipped snout and a white face. It has large, gray-colored, jagged features on its head and forelimbs, which may be described as looking like axes. Excadrill sports red diamond patterning on the side of its head, forelimbs, and legs, and larger, stripe-like patterns of red on its underside. It has folds on the back of its neck, resembling a hood.

THE PAPER MODEL
Height: 19.0 cm/ 7.5 in
Width: 16.9 cm/ 6.7 in
Depth: 25.4 cm/ 10.0 in
No. of Pages: 6
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Build the body from top down, closing at the feet. Attach the arms as you go, and be particularly careful with all the smaller parts (helmet, fingers/ arms). Numbers included on template too to help guide you along.

Download: A4 / Letter