BRAVIARY

628 / BRAVIARY - Pokémon Papercraft

Name: Braviary
Type: Normal/Flying 
Species:  Valiant Pokémon
Height: 1.5 m (4'11″)
Weight: 41.0 kg (90.4 lbs.)
Interesting Facts: Braviary is extremely aggressive, but for noble reasons. It will fight fiercely to help and protect its friends. Even if it is injured or has its life threatened, it will still fight. The more scars it has on its front, the more respect it gets from its peers. Scars on its back will bring it ridicule however. It has earned the nickname "hero of the skies" due to its extreme dedication for its friends. Aiding its valiance, Braviary is extremely strong, capable of lifting a car and flying with it.

THE PAPER MODEL
Height: 21.5 cm/ 8.5 in
Width: 23.7 cm/ 9.3 in
Depth: 23.1 cm/ 9.1 in
Pages: 10 (+4 for Nest base)
Pieces: 89 (+6 for base) 
Level: Medium
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site, and Chibi Braviary, can be found here!)

NOTES: Start building the model with the hair and neck feathers, then work from the beak and work backward to the neck. Make sure to FOLD all the lines for this section when building the hair, similar to Rufflet. When building the top white and red feathers on the face, you will need to glue the non-colored sides to each other to connect the neck feathers to the face feathers. For the side of the face feathers you will need to glue them over onto each other (pieces 18-23 will fold in half and glue to each other), and then glue them to the side of the face accordingly. Work downwards and build and attach the wings when you get there. When you get to piece 55, 84, and 85, make sure to also fold these pieces to get cleaner looking legs. Build the legs and attach them before connecting the rest of the body. Close the model with piece 85 on the right or left leg respectively, then glue the tail feathers between the legs and pieces 78-82. In order to get the model to stand, you can either build the stand and place a counterweight on the stand like another model or you can create a tripod with the two legs and piece 80.

The base (not pictured) is a little different and unique for this model - it's designed to cater to Braviary's specific pose, and the 'empty' nest doesn't have to be all too empty if you build Rufflet with it! Rufflet is to scale with Braviary, and stands right inside the nest. In order for the base to fully hold up Braviary, it's suggested to weight piece 91 before fully closing it, as this will help prevent Braviary from sliding away.  

Download: A4 / Letter

CrafterWong's Site, and Chibi Braviary, can be found here!

RUFFLET

627 / RUFFLET- Pokémon Papercraft

Name: Rufflet
Type: Normal/Flying 
Species:  Eaglet Pokémon
Height: 0.5 m (1'08″)
Weight: 10.5 kg (23.1 lbs.)
Interesting Facts: The thick, black talons on Rufflet's feet are strong enough to break even the hardest of berries, and crack Shellder to consume their insides. It is extremely aggressive from birth and knowingly provokes opponents larger and more powerful than itself, including its own parent to gain acceptance. It sees this as a means of quickly getting stronger.

THE PAPER MODEL
Height: 12.0 cm/ 4.7 in
Width: 10.1 cm/ 4.0 in
Depth: 12.7 cm/ 5.0 in
Pages: 5 
Pieces: 67
Level: Medium
Designer: Brandon
Photo: CrafterWong (CrafterWong's Site, and Chibi Rufflet, can be found here!)

NOTES: First build the head. After that, build the feathers around the head. These feathers are 2d and you MUST fold all the lines in order to get the feathers to look good. When building the feathers, build them in the order from the face to the back of the head. You will need to free hand glue them to the head and do not worry if you do not use all of them. Just make sure that it covers the entire head. Continue working downwards attaching the wings as you go. When making the wings, build the wings and only attach the inside part of the feather to the wing before cutting out the entire feathers (picture included in packs for visual). Attach the head and neck feathers to the body prior to closing the model with the right or left leg. Glue the feet on to the model and let it dry the way you want the model to stand. And with that, I hope you enjoy building and stay tuned!

Download: A4 / Letter

CrafterWong's Site, and Chibi Rufflet, can be found here!

BOUFFALANT

626 / BOUFFALANT- Pokémon Papercraft
Name: Bouffalant
Type: Normal
Species: Bash Buffalo Pokémon
Height: 1.6 m (5′03″)
Weight: 94.5 kg (208.3 lbs.)
Interesting Facts: A territorial Pokémon, Bouffalant will headbutt anyone that attempts to invade its territory. However, in the anime, it has been known not to attack those with an afro hairstyle. Protected by its afro, which absorbs damage, its headbutts are strong enough to derail a train and send it flying. It can also destroy a car with just a Headbutt. The more hair a Bouffalant has on its head, the higher positions it has in the herd. A herd of Bouffalant consists of 20 individuals. For unclear reasons, a Bouffalant loses its hair from its head should it ever betray its herd.

THE PAPER MODEL
Height: 15.5 cm / 6.1 in
Width: 24.0 cm / 9.5 in
Depth: 23.8 cm / 9.4 in
Pages: 7
Pieces: 53
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!

Current Photo (below): from Ilana M via email! 

NOTES: The Head, the "Chest Fur", Horns, Legs, and Body are all separate pieces, so there is a bit of room for freedom in the order everything gets built and attached. Everything is numbered, so you can just follow those for the most part - Head from the face backward, closing at piece 26 (after the horns are attached). Body from the front back, closing at piece 44. From there, the legs attach via a sort of double sided fur - pieces 34, 38, 49 and 53 are all pieces that the legs glue to, and then glue into the body where the legs have fur pointed downward around an opening. Each piece of 34/38/49/53 should match parts of  28/29/41/42 respectively to fit together. After the legs are attached and glued to the body via the fur, feel free to use scissors to 'feather' the fur as well, cut small lines to make it a bit more hair like. 

Download: A4 / Letter

DEERLING

585/ DEERLING - Pokémon Papercraft
Name: Deerling
Type: Normal/Grass
Species: Season Pokémon
Height: 0.6 m (2′00″)
Weight: 19.5 kg (43.0 lbs.)
Interesting Facts: Deerling is a fawn-like Pokémon, most resembling a fallow deer. The upper side of its body is pink in the spring, green in the summer, orange in the autumn, and brown in the winter. It has a yellow patterned rim, and its underside is peach. It sports a yellow floral tuft on its head, and similar yellow coloration on the insides of its tapering ears. The tips of its limbs are colored black and its pink tail is small. It can change in appearance with the changing of the seasons. If it senses animosity, it hides in tall grass. It moves in herds as it is timid around humans. It dwells in sparsely populated areas, away from humans. It is herbivorous.

THE PAPER MODEL
Height: 15.7 cm / 6.2 in
Width: 12.7 cm / 5.0 in
Depth: 4.9 cm / 1.9 in
Pages: 3
Pieces: 30
Level: Easy
Designer: POdragon
Photo: PMF

NOTES: Build from the head down, attaching the ears (and flower) as you can. Make and attach the legs as soon as you can (numbered for easy reference). Close at the back, then glue on the tail. PDFs for all seasons included. 

 

Download: A4 / Letter

AUDINO

531/ AUDINO- Pokémon Papercraft
Name: Audino
Type: Normal
Species: Hearing Pokémon
Height: 1.1 m (3′07″)
Weight: 31.0 kg (68.3 lbs.)
Interesting Facts: Audino has floppy ears with thin, curled extensions on the underside. It can use these ears as radars, and it has an incredible hearing ability. The feelers on its ears act like stethoscopes in that it can feel the beat of another Pokémon's heart, to assess the Pokémon's feelings and overall physical condition. The feelers are also able to determine when an Egg is close to hatching.

THE PAPER MODEL
Height: 18.0 cm / 7.1 in
Width: 15.5 cm / 6.1 in
Depth: 11.4 cm / 4.5 in
Pages: 5
Pieces: 53
Level: Medium
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: The ears and feet might be the trickiest things, but nothing too awful. Start at the top of the head, making the ears and working down. Attach the arms as you can, then work the legs from the left foot to the right foot and close at the bottom of the right foot. Attach the tail as the numbers indicate, before closing the body. 

 

Download: A4 / Letter

TYPE NULL & SILVALLY

772 & 773 / TYPE NULL & SILVALLY- Pokémon Papercraft
Name: Type Null & Silvally
Type: Normal 
Species: Synthetic Pokémon
Height: 1.9 (2.3) m (6′03″ [7'07"])
Weight: 120.5 (100.5) kg (265.7 lbs. [221.6])
Interesting Facts: Type: Null is a quadruped, chimeric Pokémon with traits from a variety of creatures. Its head is enclosed in a brown helmet with green markings, designed to suppress its power to stable levels. The helmet has a large jaw piece that wraps around the front with large, round hinges on the side.

Silvally is a quadruped, chimeric Pokémon with traits from a variety of creatures. It has a mammalian head with mechanical parts. Covering most of its head and neck is a thick, silver mane that extends down over its chest. Its blunt snout is metallic on the bridge of its nose and upper jaw. 

THE PAPER MODEL
Height: 26.0 cm / 10.2 in
Width: 18.9 cm / 7.4 in
Depth: 23.9 cm / 9.4 in
Pages: 8 (Silvally)/9 (Null)
Pieces: 93 (Silvally)/111 (Null) 
Level: Hard
Designer: Brandon
Photo: Feel free to submit your own at our email and we'll display the best/most creative!
NOTES: Fun fact - Silvally and Type Null actually share the same body, with the head and a few minor features being the only difference. The way this template is set up allows you to build the body as one distinct piece, and swap out the heads if you build in something like a magnet inside the neck on each side. 

The template is numbered accordingly as well - Build the back legs and tail first (branching between N28-N33 for Type Null's tail, or S28-S33 for Silvally's. Move forward towards the front legs and neck, closing the body at the neck (piece 64 is where the first magnet would need to go to make the heads swappable). From here it gets way more divergent - the pieces beginning with N are for Type Null's head, and the pieces beginning with S are for Silvally's head. All of the pieces for Silvally's drive change are on the very last page - if you want to print off different pieces for this, all you have to do is change the Eye and Fin textures accordingly and print the last page. The head (and front legs, for that matter) of both of these are definitely the toughest pieces. Each has a decent amount of detail that can make them tricky, probably Type Null a bit more so than Silvally. Take the small pieces slowly and carefully, especially around the eyes and ears. N96 and S87 are the pieces of the neck for Null and Silvally respectively that would need a magnet as well, as they form the inner piece of the 'collar' that ends up attaching to the neck of the body. 

For the fin of the body (28-33), if you plan on interchanging between Silvally and Null, I'd suggest building it with Null's pieces (N28-N33) initially and sliding Silvally's over it afterward if desired. 

Download: A4 / Letter

TEDDIURSA v2 (Sitting)

216 / Teddiursa v2 - Pokémon Papercraft
Name: Teddiursa
Type: Normal
Species: Little Bear Pokémon
Height: 0.6 m (2'00″)
Weight: 8.8 kg (19.4 lbs.)
Interesting Facts: Teddiursa uses Beedrill pollen and fruit to create its own honey. The marking on its face glows when it finds honey already made. Honey is often absorbed into Teddiursa's forepaws, and it is often seen licking them. It will hide food stores throughout its territory before food becomes scarce in winter. Teddiursa lives in mountainous forests.

THE PAPER MODEL
Height: 18.1 cm / 7.1 in
Width: 16.1 cm / 6.3 in
Depth: 12.4 cm / 4.9 in
Pages: 6
Pieces: 60
Level: Easy-Medium
Designer: Brandon
Photo: FlamingCheese via Email! Shiny Teddy from Mark B via email as well!

Feel free to submit your own at our email and we'll display the best/most creative! 
NOTES: Start the model at the top of the head with the ears, following it down. Before sealing the bottom, be sure to attach the legs to the front evenly so that they help stabilize the model. 

We might have returned with a re-vamped model, but more (unique) ones soon to come! 

Download: A4 / Letter

MEOWTH V2 - HAPPY!

052 / MEOWTH - Pokémon Papercraft
Name: Meowth
Type: Normal
Species: Scratch Cat Pokémon
Height: 0.32 m (1'04")
Weight: 4.2 kg (9.3 lbs.)
Interesting Facts: Meowth are valued for their ability to collect coins using Pay Day, as it is the only Pokémon that learns it. Meowth are very fond of anything round and shiny. As such, they have been known to wander about city streets and pick up anything that is round and shiny - coins in particular. It evolves into Persian starting at level 28.

THE PAPER MODEL
Height: 18.0 cm / 7.0 in
Width: 15.2 cm / 5.9 in
Depth: 17.3 cm / 6.8 in
Pages: 4
Pieces: 45
Level: Medium-Easy
Designer: Paperpokés
Photo: LuIS
NOTES: Start at the ears and build the head following the numbers. Glue the whiskers and the medal before closing at the bottom. Start the body at the toes and the tail at the tip. I suggest reinforcing the connection between the body and the tail. Be careful with the paws, they need to be folded at the indicated lines. Close the body at the top and glue the head after both are closed.

Download: A4 / Letter

ATTACK MEOWTH

MEOWTH V2 - ATTACK!

052 / MEOWTH - Pokémon Papercraft
Name: Meowth
Type: Normal
Species: Scratch Cat Pokémon
Height: 0.32 m (1'04")
Weight: 4.2 kg (9.3 lbs.)
Interesting Facts: Meowth are valued for their ability to collect coins using Pay Day, as it is the only Pokémon that learns it. Meowth are very fond of anything round and shiny. As such, they have been known to wander about city streets and pick up anything that is round and shiny - coins in particular. It evolves into Persian starting at level 28.

THE PAPER MODEL
Height: 14.1 cm / 5.5 in
Width: 15.2 cm / 5.9 in
Depth: 17.3 cm / 6.8 in
Pages: 4
Pieces: 45
Level: Medium-Easy
Designer: Paperpokés
Photo: LuIS
NOTES: Start at the ears and build the head following the numbers. Glue the whiskers and the medal before closing at the bottom. Start the body at the toes and the tail at the tip. I suggest reinforcing the connection between the body and the tail. Be careful with the paws, they need to be folded at the indicated lines. Close the body at the top and glue the head after both are closed.

Download: A4 / Letter

HAPPY MEOWTH

AIPOM

190 / AIPOM - Pokémon Papercraft
Name: Aipom
Type: Normal
Species: Long Tail Pokémon
Height: 0.8 m (2′07″)
Weight: 11.5 kg (25.4 lbs.)
Interesting Facts: Aipom is an monkey-like Pokemon with a hand with 3 fingers at the tip of it's tail. The fur is mainly purple, but some beige parts can be noted, such as the face and belly. The tail is strong enough to anchor it to branches and suspend the rest of the body, but at the same time it's delicated enough to eat fruits and manipulate objects. Aipom lives high in the treetops, using its tail for balance as it swings from branch to branch. 

THE PAPER MODEL
Height: 18.1 cm / 7.1 in
Width: 12.8 cm / 5 in
Depth: 16.2 cm / 6.3 in
Pages: 4
Pieces: 39
Level: Medium/Easy
Designer: Brandon
Photo: LuIS
NOTES: Start the model at the fur on the top of the head and close the head at the bottom. It's important to note that all the lines piece 1 should be at least smootly folded, in order to get the right shape. Start the body at the legs and add details, such as tail and arms as you go. The tabs on the legs are a bit weird, but they're like that to give them more strenght. Close the body at the top and glue the head to it after. The feet are the last part you'll glue, make sure they are leveled with the tail, so the model will stand without weight.

Download: A4 / Letter

BUNNELBY

659 / BUNNELBY - Pokémon Papercraft
Name: Bunnelby
Type: Normal
Species: Digging Pokémon
Height: 0.4 m (1′04″)
Weight: 5.0 kg (11.0 lbs.)
Interesting Facts: Bunnelby is a small, gray, rabbit-like Pokémon, with large ears with a pinkish fur on the inside. The collar around it's neck is made of brown fur. It's ears are strong enough to shovel dirt and chop tree roots. It tends to be nocturnal.

THE PAPER MODEL
Height: 21.0 cm / 8.2 in
Width: 12.4 cm / 4.8 in
Depth: 8.0 cm / 3.14 in
Pages: 3
Pieces: 46
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Not a hard model, but some parts can offer some trouble. I indicated the lines that must be fold in red, they're mainly on the ears, and it can be quite hard to build without folding. Start the model at the top of the ears and build down, closing the head at the bottom. Glue the nose before closing the body and the teeth after. You might have to force a bit the cheek are in order for the teeth to glue correctly. Glue the head to the collar as soon as it's ready. Build the body from the legs up, closing at the top.

Download: A4 / Letter

EXPLOUD

295 / EXPLOUD - Pokémon Papercraft
Name: Exploud
Type: Normal
Species: Loud Noise Pokémon
Height: 1.5 m (4'11")
Weight: 84.0 kg (185.2 lbs.)
Interesting Facts: Exploud is a large blue bipedal Pokémon with a large mouth. It has two peg-like teeth on each jaw. It has protruding tubes with holes along its body: seven along the crest on its head, four on its elbows and knees, two along its back, and two on the end of its two tails. Exploud's bellowing is capable of triggering earthquakes and can be heard from over six miles away. It only raises its voice when it is in battle. It communicates its feelings to others by producing whistle-like sounds. It lives in caves.

THE PAPER MODEL
Height: 16.5 cm/6.5 in
Width: 15.7 cm/ 6.2 in
Depth: 17.6 cm/6.9 in
No. of Pages: 5
No. of Pieces: 42
Level: Medium
Designer: PMF
Photo: LuIS
NOTES: Start at the top of the head, build the tubes first and the face around them. The mouth is glued after the first piece of the back is glued. Glue pieces 17 and 20 to the arms after the first segments of pieces 16 and 19 are built. The parts under the mouth (22 and 23) can get tricky, start them at the bottom of the lips. Close at the tip of the tails.

Download: A4 / Letter

TOGEKISS (Happy Easter!)

468 / TOGEKISS - Pokémon Papercraft
Name: Togekiss
Type: Fairy/Flying
Species: Jubilee Pokémon
Height: 1.5 m (4'11")
Weight: 38.0 kg (83.8 lbs.)
Interesting Facts: Togekiss is a white, avian Pokémon with an ovoid body. While its feet are small and situated closely together, its wings are broad and triangular. Red and blue triangular markings over its underside, and it has a short tail consisting of three feathers. On the back of its head are three spikes: a red tipped on the right, a blue tipped one on the left, and a pure white one in the middle. Togekiss has a relatively flat face and small, black eyes. This Pokémon is rarely seen, only appearing in peaceful areas. When it is seen or visits respectful people, it showers gifts of blessings and kindness.

THE PAPER MODEL
Height: 16.5 cm/6.5 in
Width: 29.9 cm/11.8 in
Depth: 19.7 cm/7.8 in
No. of Pages: 7
No. of Pieces: 75
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start the model at the top of the head, follow the numbers and the istructions and close at the tail. The only part that can offer some trouble on this one is joining the wings with the body, since they are quite big. If you glue the two first chest pieces to it, will make it easier. It stands on it's own, just be careful while placing the feet so they match the pdo and the picture. If it won't stand, add some weight, there should be an opening, since the tail should be only glued after it's standing. To finish it, glue the feathers.

About the wings, up until a point (12), the build with both the wings is the same, after that, if you want the wings as shown on the picture, follow the red numbers, if you want the ones as shown on the pdo, use the black numbers.

Download: A4 / Letter

STARLY

396 / STARLY- Pokémon Papercraft
Name: Starly
Type: Normal/Flying
Species: Starling Pokémon
Height: 0.3 m (1'00")
Weight: 2.0 kg (4.4 lbs.)
Interesting Facts: Although capable of flapping its wings powerfully, Starly is weak and inconspicuous when alone. It forms large flocks to protect itself. However, individuals will begin to bicker if the group becomes too large. This Pokémon’s cry is harsh, and its singing can become annoying. Starly congregates in mountains and fields, where it hunts for bug Pokémon.

THE PAPER MODEL
Height: 16.8 cm/ 6.6 in
Width: 16.9 cm/ 6.7 in
Depth: 30.2 cm/ 11.9 in
No. of Pages: 5
No. of Pieces: 40
Level: Medium
Designer: LuIS
Photo: LuIS
NOTES: The model is built in two main parts: head and body. Start the head at the top feather and work down, it's pretty simple. The body starts at the tail. Remember do glue the legs and wings to it BEFORE closing. The legs are simple, just start at the toes and work by numbers. The wings are built in segments, the instructions on the templates explain how they are supposed to be built. The model might need some weight to stand. Before closing the body, put some weight inside and pop the head until it stands, when it does, close the body and glue the head to it.
Both the textures for Male and Female variants are included, with the Male textures used for non-shiny PDFs and the Female textures used for shiny PDFs.

Download: A4 / Letter

STARAPTOR

398 / STARAPTOR - Pokémon Papercraft
Name: Staraptor
Type: Normal/Flying
Species: Predator Pokémon
Height: 1.2 m (3'11")
Weight: 24.9 kg (54.9 lbs.)
Interesting Facts: Staraptor is a grayish-brown, avian Pokémon similar to a large bird of prey. It has small, red eyes and a thin, yellow beak with a black tip. There is a circular white patch on its forehead, which is smaller on the female. Larger white markings cover the front of its throat and chest, separated by a black ruff encircling the shoulders. A red-tipped, black crest extends over its head, nearly reaching the tip of its beak.

THE PAPER MODEL
Height: 20.6 cm/8.1 in
Width: 18.5 cm/7.3 in
Depth: 30.2 cm/11.9 in
No. of Pages: 6
No. of Pieces: 56
Level: Hard
Designer: LuIS and Brandon
Photo: LuIS
NOTES: The model is built in two main parts: head and body. Start the head at the top feather and work down. The body starts at the tail, which is pretty hard to build. Fold the indicated lines and take your time there. Remember do glue the legs and wings to the body BEFORE closing. Start the legs at the claws and work by numbers, reinforce them from the inside, the model is pretty heavy. The wings are built in segments, the instructions on the templates explain how they are supposed to be built. The model needs weight to stand. I create a pocked inside the body to counterbalance it, reference pictures and instructions are added on the pack and on the template. Add the weight inside and pop the head until it stands, when it does, close the body and glue the head to it. Further instructions added on the template.

Download: A4 / Letter

DODRIO

085 / DODRIO - Pokémon Papercraft
Name: Dodrio
Type: Normal/Flying
Species: Triple Bird Pokémon
Height: 1.8 m (5'11")
Weight: 85.2 kg (187.8 lbs.)
Interesting Facts: Along with its three heads, Dodrio has three sets of hearts and lungs as well. This allows it to efficiently oxygenate and pump blood throughout its body, thus giving it increased endurance to run vast distances without rest. It is especially prone to race vigorously across grassy plains, even in arid seasons with little rainfall.

THE PAPER MODEL
Height: 22.0 cm/8.7 in
Width: 15.1 cm/ 5.9 in
Depth: 14.1 cm/5.6 in
No. of Pages: 3
No. of Pieces: 76
Level: Medium-Hard
Designer: Brandon
Photo: LuIS
NOTES: There are two start points: the heads and the legs. After both segments are done, join them with the indicated piece. The beaks can offer some trouble, take your time there. For a smoother build it's suggested to fold the indicated lines. After the model is closed, glue the tail. The head details can be glued after the heads are connected to the torso. The necks and the legs might break with time, some reinforcement is suggested, such as a thin wire on the necks and a thicker one for the legs or some stripes of paper inserted in them. The model won't stand on it's own, in order to do that you can use a base.

There are also textures included for both the apricot colored neck (female) and darker neck (male). The default is female, Pepakura Viewer is needed to use the male textures.

Download: A4 / Letter

ARCEUS

493 / Arceus - Pokémon Papercraft
Name: Arceus
Type: Normal
Species: Alpha Pokémon
Height: 3.2 m (10'06")
Weight: 320.0 kg (705.5 lbs)
Interesting Facts: Arceus is also known as "The Original One", as it is said that it created Sinnoh and Ransei, and possibly the entire Pokémon universe, along with the lake guardians and creation trio. Arceus can only be found in the wild legitimately with the Azure Flute, which was never distributed at any official event and can only be obtained by cheating. However, Arceus itself was distributed via multiple Nintendo events in 2009 and 2010 and the Pokémon Global Link in 2012.

THE PAPER MODEL
Height: 25.0 cm/ 9.8 in
Width: 45.2 cm/ 17.8 in
Depth: 34.2 cm/ 13.5 in
No. of Pages: Body - 6 Base - 2-7 (Be sure you're printing only what you need)
Level: Hard
Designer: LuIS
Photo: LuIS
NOTES:  Be sure to check out the files BEFORE printing. Not all of the pages need to be printed, and you have options to select to print.

This model can be tricky, so some experience is important. There are plenty of instructions on the template, but basically, it's composed by three main parts: the torso, the ring and the back. Start at the head, close at the belly. After that, build the ring, be careful, it's the trickiest part of the model. Join the body with the ring. The back is the easiest part, start at the tip of the tail. There are four options for the front legs (regular, mirrored, and with the legs leveled at a lower and a higher level), two options for the head (regular and mirrored), two for the tail (regular and mirrored) and two bases (one as shown in the picture and a simpler one). The connections with these parts are the same as the regular ones, so they are built basically the same way. There are textures for each type that Arceus can become and three different textures for the base, but the use of these require the pdo to change from the regular ones, so as the game plates, the movie plates only have one possible texture. There are plenty more info on the template as well as references to lines that should be folded, places that NEED to be reinforced and the suggested build order.

In order to use the Texture Pack, you'll have to use Pepakura/the PDO. Shiny and Normal pdfs are included in the packs per usual.

Download: A4 / Letter - Arceus Texture Pack

SAWSBUCK W (Merry Christmas!)

586 / SAWSBUCK W- Pokémon Papercraft

Name: Sawsbuck
Type: Normal/Grass
Species: Season Pokémon
Height: 1.9 m (6′03″)
Weight: 92.5 kg (203.9 lbs.)
Interesting Facts: Sawsbuck is a brown and cream deer-like Pokémon with rhomboid ears and darker ear insides. Its eyes have light-orange markings that curve down to sides of its face. It has a dark-brown nose, and it sports cream fur on its chin and sides of its face. Light-orange stripes rim its underbelly, and its back is decorated with spots corresponding to the season: pink in spring, green in summer, orange in fall, and white in winter. Its limbs are slender and tipped with hooves. Unless it's summer, its brown tail points down. Sawsbuck lives in herds led by the Sawsbuck with the most splendid antlers. It can live almost anywhere as they adapt to the season, but prefer to live away from humans. It is herbivorous.

THE PAPER MODEL
Height: 19.8 cm/ 7.8 in
Width: 18.1 cm/ 7.1 in
Depth: 14.9 cm/ 5.9 in
Pages: 3
Pieces: 65
Level: Medium/Hard
Designer: PODragon
Photo: LuIS
NOTES: Start at the nose, building the head around it. Build the fur and the antlers, but only glue the antlers to the head AFTER the fur is glued. Build the legs from the hooves up. Glue the cufs to the indicated tabs after the hoovers are glued. Close at the back and glue the tail after. It can take some weight to stand, a coin placed on the back should do.

Download: A4 / Letter

LINOONE

264 / Linoone - Pokémon Papercraft
Name: Linoone
Type: Normal
Species: Rushing Pokémon
Height: 0.5 m (1'08")
Weight: 32.5 kg (71.6 lbs)
Interesting Facts: Linoone can run up to 60 mph, but has to stop before it can make a turn. It often fails to catch prey due to only being able to run in a straight line. When it sees prey underwater in ponds, it leaps in and uses its sharp claws to catch the prey. As shown in the anime, Linoone has an attraction to anything round, and will grab any orb-shaped object it sees if given the chance. It often carries a snatched object in its expandable cheek pouches and deposits it in any of a number of secret stashes it keep on its territory. Linoone tends to live in grasslands.

THE PAPER MODEL
Height: 25.0 cm/ 9.8 in
Width: 13.8 cm/ 5.4 in
Depth: 32.4 cm/ 12.8 in
No. of Pages: 7
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Build normally until reaching piece 10. At piece 10, fold the colored tabs outward- these will attach to the corresponding colored tabs on pieces 11, 13, and 17. When it comes to attaching those parts, be sure to fold the colored tabs there outward as well, and glue them to the other same-colored tabs. These form the connection where parts 21-24 attach, which are also color coded. This is probably the trickiest build part to follow, but easy once you get the parts matched up correctly. After this, simply keep building from the head down, attaching the tail when possible, then the legs, then the belly and close at the bottom.

Download: A4 / Letter

DUNSPARCE

206 / DUNSPARCE - Pokémon Papercraft
Name: Dunsparce
Type: Normal
Species: Land Snake Pokémon
Height: 1.5 m (4'11")
Weight: 14.0 kg (30.9 lbs)
Interesting Facts: At first glance, these Pokémon appear plain. However, Dunsparce make themselves quite elusive. They also are able to dig extremely well and fly a little using their small wings. Dunsparce are extremely shy of human beings and rarely ever make themselves known. However, they are known to swarm on random occasions.

THE PAPER MODEL
Height: 7.2 cm/ 2.8 in
Width: 16.7 cm/ 6.6 in
Depth: 21.0 cm/ 8.3 in
No. of Pages: 2
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the mouth and close at the tip of the tail. Glue the wings and spikes under the mouth as soon as the numbers indicate, so you can apply presure from the inside.

Download: A4 / Letter