OSHAWOTT (MIJUMARU)

501 / OSHAWOTT - Pokémon Papercraft
Name: Oshawott (Mijumaru)
Type: Water
Species: Sea Otter Pokémon
Height: 0.5 m (1′07″)
Weight: 5.9 kg (13.3. lbs.)
Interesting Facts: Ken Sugimori said that Oshawott and its evolutions were the hardest for the team to design during production, as conceptualizing its evolutions were difficult. They eventually settled on a samurai theme and making its final form a sea lion after a trip to an aquarium. It evolves into Futachimaru starting at level 17, which evolves into Daikenki starting at level 36.

THE PAPER MODEL
Height: 16.5 cm/ 6.5 in
Width: 12.1 cm/ 4.7 in
Depth: 13.4 cm/ 5.3 in
Pages: 5
Pieces: 35
Level: Medium
Designer: PMF
Photo: PMF

NOTES: Oshawott is not too hard. Start by building the head, adding the nose and ears as you go. Then build the body, adding the arms and the tail as you build it from the head to the feet. The feet are separated from the body and should be glued at a slight angle (not straight forward). It should balance with the tail.

The collar is made of 8 balls that you glue all around the neck. Keep note of the letters on the template and the small illustration showing where each goes.

Download: A4 / Letter

TEPIG [POKABU] (Chinese New Year 2019)

498 / TEPIG - Pokémon Papercraft
Name: Tepig (Pokabu)
Type: Fire
Species: Fire Pig Pokémon
Height: 0.5 m (1′07″)
Weight: 9.9 kg (22.0 lbs.)
Interesting Facts: Ken Sugimori said that Tepig and its evolutions were meant to evoke a Chinese feel. Its typing and appearance are reminiscent of Zhu Bajie, a pig demon from the Chinese tale, Journey to the West. Tepig evolves into Chaobu starting at level 17, which evolves into Enbuoo starting at level 36.

THE PAPER MODEL
Height: 18.1 cm/7.1 in
Width: 7.5 cm/ 2.9 in
Depth: 17.8 cm/ in
Pages: 4
Pieces: 35
Level: Medium
Designer: Paperpokés Team
Photo: PMF
NOTES: The model is kinda simple to build, the only hard parts are to close the body, but mostly to glue the tail correctly on the body so it stand right.

Start by building the nose and then the rest of the head. You can glue the ears already on the head or wait until the end (it might be easier now). After, build the front legs, the chest and the body (orange pieces) and attach them together. You can now glue the head and the body together. Glue the first big black piece on the body, then build the rear legs and attach them to the black piece. Finish to build the "behind" from the top to the bottom where you can close the model between the legs with the black square piece.

The tail is the hard part to make; not to build but to twist correctly. You'll probably have to force it a little to bend correctly and it might be a good idea to glue the tail to the body at the base and also at the middle of the tail where it roll over the body. You'll also need something to hold it in place while it dries.

Finally, you still have to build the ball and glue it at the tip of the tail. You can use the twist of the tail to make it stand more easily and you'll need something to hold it in place while it dries too.

Download: A4 / Letter

SNIVY (TSUTARJA)

495 / SNIVY - Pokémon Papercraft
Name: Snivy (Tsutarja)
Type: Grass
Species: Grass Snake Pokémon
Height: 0.6 m (2'00″)
Weight: 8.1 kg (17.6 lbs.)
Interesting Facts: Ken Sugimori has said that Snivy's personality was meant to be similar to that of European (particularly French) royalty, specifically mentioning The Rose of Versailles anime as inspiration. The Rose of Versailles was also the inspiration for two characters of the day in the anime. It evolves into Janoby starting at level 17, which evolves into Jaroda starting at level 36.

THE PAPER MODEL
Height: 19.9 cm/ 7.9 in
Width: 18.3 cm/ 7.1 in
Depth: 8.3 cm/ 3.3 in
Pages: 4
Pieces: 43
Level: Medium
Designer: PMF
Photo: PMF

NOTES: Snivy is kinda easy to build, just start with the nose, add the eyes, then build the neck. After building the neck, you should glue the "collar" and the arms to the body before building the rest. Same thing with the legs which should be glued when building the belly. The tail is a bit weird since the tip of the tail has to be glue on top of the tail kinda like a sandwich with the big green part between the 2 pieces forming the tip of the tail.

Snivy's legs are too small to support the model so you will need to glue the feet to base if you want the model to stand right.

Download: A4 / Letter

RESHIRAM

643 / RESHIRAM - Pokémon Papercraft
Name: Reshiram
Type: Dragon/Fire
Species: White Yang Pokémon
Height: 3.2 m (10′6″)
Weight: 330.0 kg (150.0 lbs.)
Interesting Facts: Reshiram and its counterpart Zekrom are based on the concept of yin and yang.

THE PAPER MODEL
Height: 22.0 cm/8.7 in
Width: 26.8 cm/ 10.6 in
Depth: 23.9 cm/9.4 in
Pages: 6
Pieces: 96
Level: Hard
Designer: Brandon
Photo: Carnilmo
NOTES: Some notes included in the files. Shiny now included in the download packs.

Download: A4 / Letter

LEAFEON

470 / LEAFEON - Pokémon Papercraft

Name: Leafeon
Type: Grass
Species: Verdant Pokémon
Height: 1.0 m (3′03″)
Weight: 25.5 kg (56.2 lbs.)
Interesting Facts: Leafeon is a fox-like creature with plant, dog, and cat characteristics. Its body is tan colored. It has one shade of dark brown that is carried out on the tip of its paws, as its eye color, and in the center of the ear. It has sprouts growing all over it, making it look more like a plant. It has a longer sprout of its forehead. Leafeon ears and tail both share a leaf-like quality. Leafeon can use any attack that Eevee knows with the addition of Grass-type attacks. Its leaves are apparently quite sharp since it can learn Leaf Blade, X-Scissor, and other slicing attacks. As a fully-evolved Pokémon, Leafeon can learn Hyper Beam, and Giga Impact. It can also clean the air around it.

THE PAPER MODEL
Height: 21.9 cm/8.6 in
Width: 11.6 cm/ 4.5 in
Depth: 19.2 cm/7.5 in
Pages: 5
Pieces: 68
Level: Hard
Designer: Brandon/Lyrin
Photo: Lyrin

NOTES: I won't lie to you, this is the most difficult and detailed PP model that I've built so far, so forget about assembling it without the .pdo reference. Follow the numbers and you'll be fine.

Download: A4 / Letter

FOONGUS

590 / FOONGUS - Pokémon Papercraft
Name: Foongus (Tamagetake)
Type: Grass/Poison
Species: Mushroom Pokémon
Height: 0.2 m (0′08″)
Weight: 1.0 kg (2.20 lbs.)
Interesting Facts: Tamagetake is a small mushroom with a cap that looks like a Pokéball. As such, trainers has to be careful when picking up lost Pokéball in the forest since they could catch a Tamagetake instead

THE PAPER MODEL
Height: 11.9 cm/ 4.7 in
Width: 13.7 cm/ 5.5 in
Depth: 13.7 cm/ 5.5 in
Pages: 3
Pieces: 18
Level: Easy
Designer: PMF
Photo: Brandon
NOTES: Tamagetake is pretty easy. Build the body, taking care to build the arms along the way and close it at the top. Then glue the nose right below the eyes. Finally build the cap and glue it on top of the body. Shiny now included.

Download: A4 / Letter

KLINK

599 / KLINK - Pokémon Papercraft
Name: Klink (Gear)
Type: Steel
Species: Gear Pokémon
Height: 0.3 m (1′00″)
Weight: 21.0 kg (46.3 lbs.)
Interesting Facts: Gear resembles two gears, with six cogs each, interlocking. The cogs of the gears are a light grey, while the central regions are much darker. Their left eyes are a simple "X", while their right eyes are very wide with a black pupil and a white cornea. They have round green noses and small mouths that are held wide open.

THE PAPER MODEL
Height: 12.0 cm/4.7 in
Width: 12.0 cm/ 4.7 in
Depth: 2.4 cm/1.0 in
Pages: 1
Pieces: 4
Level: Easy
Designer: PMF
Photo: PMF
NOTES: Pretty easy model. Make the nose and glue it on the "face"piece. Glue the side pieces together and then glue the whole side to the back piece. Finally glue the front... then make another one! :D Shiny now included.


Download: A4 / Letter

SCIZOR

212 / SCIZOR - Pokémon Papercraft
Name: Scizor
Type: Bug/Steel
Species: Pincer Pokémon
Height: 1.8 m (5′11″)
Weight: 118.0 kg (160.1 lbs.)
Interesting Facts: Scizor are known to upraise their claws and wave them around to scare others, as their claws look like two heads. A Scizor's wings are not meant for flying but rather used to cool down body temperature; however, Scizor have been seen being able to 'glide' with their wings in the anime, by doing things such as riding wind currents, suggesting that their wings still possess minimal flight capability.

THE PAPER MODEL
Height: 19.8 cm/7.8 in
Width: 16.6 cm/6.5 in
Depth: 17.2 cm/6.8 in
Pages: 4
Pieces: 76
Level: Hard
Designer: Brandon
Photo: Carnilmo
NOTES: Help file included in download packs. Also, it may help to add weight into the back foot (or claws) to aid it in balancing.

Download: A4 / Letter

MINCCINO

572 / MINCCINO - Pokémon Papercraft

Name: Minccino (Chillarmy)
Type: Normal
Species: Chinchilla Pokémon
Height: 0.4 m (1′04″)
Weight: 5.8 kg (12.8 lbs.)
Interesting Facts: Chillarmy is a furry, white-colored rodent-like Pokémon, sporting scruffs of fur on its head, ear insides, and neck. Chillarmy's large ears, located to the sides of its head, have red insides partly covered by the aforementioned tufts of fur there. Its eyes are large and brown, with a small, dot-like nose. Its limbs are somewhat rounded and small, and its tail is long and particularly furry.

THE PAPER MODEL
Height: 20.0 cm/7.8 in
Width: 23.1 cm/ 9.1 in
Depth: 17.0 cm/6.7 in
Pages: 6
Pieces: 47
Level: Easy
Designer: Lyrin
Photo: Lyrin

NOTES: You'll find the name "Chiramii" sometimes, because the download packs have been made before the name change. Aside from that, the model is quite simple, just follow the numbers on the template and refer to the .pdo for any further reference.
UPDATE: Shiny textures added to the download packs!

Download: A4 / Letter

Buon Compleanno Lyrin!

It's Lyrin's Birthday so everybody, go wish her a happy one in the comments :P

Oh, and you can download a mini-drifloon too! :3
(the fluffyness on top of it is made by 5 balls of cotton and a swooshy stripe of cotton. A string can be attached on top of it before glueing the cotton, in case you wanted to hang it.)

AXEW

610 / AXEW - Pokémon Papercraft
Name: Axew (Kibago)
Type: Dragon
Species: Tusk Pokémon
Height: 0.6 m (2'00″)
Weight: 18.0 kg (39.7 lbs.)
Interesting Facts: Kibago is a bipedal, greenish-colored Pokémon with noticeable nostrils and pale tusks protruding from the sides of its mouth. The back of its head, tipped with dark grayish-green coloration, has a horn- or spike-like, pointed and tall protrusion. Kibago also has dark grayish-green coloration rimming its eyes, which have red irises. A collar-like, forest-green patterning encircles its neck; most of its body is a dull grayish green. Kibago’s limbs and tail are small, with its forelimbs having three digits and its feet having two digits.

THE PAPER MODEL
Height: 15.0 cm/5.9 in
Width: 9.3 cm/ 3.7 in
Depth: 12.4 cm/4.9 in
Pages: 3
Pieces: 29
Level: Easy
Designer: Brandon
Photo: Skeleman
NOTES: Build from the head down, closing at the feet. Put a small weight in the tail before closing to make it stand. Shiny now included.

Download: A4 / Letter