LAVENDER TOWER GHOST

??? / MAROWAK'S GHOST - Pokémon Papercraft
Name: The Ghost of Cubone's Mother
Type: Normal
Species: Literal Ghost Pokémon
Interesting Facts: In Lavender Town, Team Rocket attempted to steal the skulls of all Cubone, in order to sell them for large amounts of money. One Cubone, however, was protected by its mother. The Cubone escaped, but its mother was killed. As a result, the Marowak's ghost remained in the Lavender Town Pokémon Tower, forbidding access to the topmost floor. She appears in disguise and is able to avoid all PokéBalls that are thrown at her. She is so scary, that opponent's Pokémon are too frightened to attack. However, her true form can be reveled with the use of a Silph Scope and subsequently battled. Once she has been defeated, her soul may find its peace and she can finally depart to the afterlife.

THE PAPER MODEL
Height: 16.0 cm/6.3 in
Width: 14.2 cm/ 5.6 in
Depth: 14.4 cm/6.7 in
Pages: 4
Pieces: 22
Level: Easy
Designer: POdragon
Photo: Skelekitty
NOTES: This is a really easy and fun model. Before gluing the first piece at the top of the head together, don't forget insert a long strand of micro-filament for it to hang with. To close, pop the tip of tail on with a generous amount of glue. After you have finished the body and the hands separately, use some superglue along the vertical back edge of the hands (where the wrist would be) and attach to the body. Hang from your ceiling and go "Wooooooooo!" *wiggle fingers*

Download: A4 / Letter

GIRATINA

487 / GIRATINA - Pokémon Papercraft

Name: Giratina
Type: Ghost/Dragon
Species: Renegade Pokémon
Height: 4.5 m (14′09″)
Weight: 750.0 kg (1653.5 lbs.)
Interesting Facts: Giratina is able to travel through and control dimensions besides those of time and space. When in its Origin Forme, it is able to pass through dimensions at will, however, it will turn back to its Altered Forme due to the gravity change from the Reverse World. It does so by emitting a whirlwind from its mouth which creates a portal.

THE PAPER MODEL
Height: 21.0 cm/ 8.3 in
Width: 31.0 cm/ 12.2 in
Depth: 23.5 cm/9.3 in
Pages: 9
Pieces: 84
Level: Medium/Hard
Designer: Brandon
Photo: LuIS
NOTES: Build from the tail on. Following the numbers here is really important. Build the legs and before attaching them to the body, glue all of the nails and yellow parts to them. On the middle yellow neck part build pieces 58 and 65, glue the wings to them and only after that glue pieces 59 and 66, after that is done, glue to the body. The head is easy just be careful to follow the numbers.

After quite some time, the wings may start to sag and need to be reinforced with wire or scrap to keep them up.

Download: A4 / Letter

GIRATINA CHIBI

487 / GIRATINA - Chibi - Pokémon Papercraft

Name: Giratina
Type: Ghost/Dragon
Species: Renegade Pokémon
Height: 4.5 m (14′09″)
Weight: 750.0 kg (1653.5 lbs.)
Interesting Facts: Giratina is able to travel through and control dimensions besides those of time and space. When in its Origin Forme, it is able to pass through dimensions at will, however, it will turn back to its Altered Forme due to the gravity change from the Reverse World. It does so by emitting a whirlwind from its mouth which creates a portal.

THE PAPER MODEL
Height: 11.0 cm/ 4.3 in
Width: 10.0 cm/ 3.9 in
Depth: 14.1 cm/ 5.6 in
Pages: 2
Pieces: 32
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the tail on. Make sure to follow the number specially on the legs part. The yellow parts of the neck must be glued before the head is attached. Be careful on the ones that connect on the wings, build the main parts ( 19 and 25 ), glue the wings to it and after that glue pieces 24 and 26.

Download: A4 / Letter

GIRATINA ORIGIN FORME CHIBI

487 / GIRATINA ORIGIN FORME - Chibi - Pokémon Papercraft

Name: Giratina Origin Forme
Type: Ghost/Dragon
Species: Renegade Pokémon
Height: 6.9 m (22′08″)
Weight: 650.0 kg (1433.0 lbs.)
Interesting Facts: Giratina is able to travel through and control dimensions besides those of time and space. When in its Origin Forme, it is able to pass through dimensions at will, however, it will turn back to its Altered Forme due to the gravity change from the Reverse World. It does so by emitting a whirlwind from its mouth which creates a portal.

THE PAPER MODEL
Height: 9.0 cm/ 3.5 in
Width: 8.9 cm/ 3.5 in
Depth: 12.7 cm/ 5.0 in
Pages: 2
Pieces: 43
Level: Hard
Designer: Brandon
Photo: LuIS
NOTES: Build from the tail on. Make sure to follow the number specially on the legs part. The yellow parts of the neck must be glued before the head is attached. Be careful on the ones that connect on the wings, build the main parts ( 19 and 25 ), glue the wings to it and after that glue pieces 24 and 26.

Download: A4 / Letter

SHUPPET

353 / SHUPPET - Pokémon Papercraft
Name: Shuppet
Type: Ghost
Species: Puppet Pokémon
Height: 0.6 m (2'00″)
Weight: 2.3 kg (5.1 lbs.)
Interesting Facts: Shuppet roams about at night in cities, seeking such negative emotions as grudges and envy. If someone develops strong feelings of vengeance, Shuppet will appear in a swarm and line up beneath the eaves of that person's home. It retreats to its nest when the sun begins to rise.

THE PAPER MODEL
Height: 11.9 cm/ 4.7 in
Width: 6.4 cm/ 2.5 in
Depth: 6.5 cm/ 2.6 in
No. of Pages: 2
No. of Pieces: 13
Level: Easy
Designer: Brandon
Photo: Olber
NOTES: Build from the top of the head, following the numbers. Close at the bottom and insert the inner part of the body, sealing it.

Download: A4 / Letter

MIME JR CHIBI

439 / MIME JR - Chibi - Pokémon Papercraft

Name: Mime Jr.
Type: Psychic/Fairy
Species: Mime Pokémon
Height: 0.6 m (2′00″)
Weight: 28.7 kg (28.7 lbs.)
Interesting Facts: Mime Jr. has a knack for imitating others. It has been known to Mimic its foes in order to create distractions. Once the foe is confused, it'll quickly escape.

THE PAPER MODEL
Height: 11.0 cm/ 4.3 in
Width: 5.0 cm/ 2.0 in
Depth: 5.5 cm/ 2.2 in
Pages: 1
Pieces: 17
Level: Easy
Designer: Olber & Brandon
Photo: Olber
NOTES: Follow the numbers, closing with the back. Plop the top of the hat onto the head when complete, and the head onto the body when complete.

Download: A4 / Letter

GENGAR CHIBI

094 / GENGAR - Chibi - Pokémon Papercraft

Name: Gengar
Type: Ghost/Poison
Species: Shadow Pokémon
Height: 1.5 m (4′11″)
Weight: 40.5 kg (89.3 lbs.)
Interesting Facts: Gengar is a dark-purple furred Pokémon with a roundish body. Gengar's hands now connect to the rest of its body and it now has a pair of legs. Gengar has a spiky fur-covered back. Upon evolution, Gengar's eyes are now red. Also, its mouth is usually curled into a sinister grin.

THE PAPER MODEL
Height: 8.0 cm/ 3.1 in
Width: 8.1 cm/ 3.2 in
Depth: 6.6 cm/ 2.6 in
Pages: 1
Pieces: 19
Level: Easy
Designer: Brandon
Photo: Olber
NOTES: Follow the numbers, being a little careful with the spikes on the back.

Download: A4 / Letter

HAUNTER CHIBI

093 / HAUNTER - Chibi - Pokémon Papercraft

Name: Haunter
Type: Ghost/Poison
Species: Gas Pokémon
Height: 1.6 m (5′03″)
Weight: 0.1 kg (0.2 lbs.)
Interesting Facts: Haunter is a purple, ghost-like Pokémon with a roundish body. Haunter posesses a trio of spike-like protrusions on either side of its face, and what appears to be a tuft of messy fur hanging beneath it. It has triangular white eyes with tiny black pupils and a mouth with several sharp, purple teeth. Haunter has a pair of disembodied hands with three digits floating in front of it.

THE PAPER MODEL
Height: 8.4 cm/ 3.3 in
Width: 9.0 cm/ 3.5 in
Depth: 8.3 cm/ 3.3 in
Pages: 1
Pieces: 20
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers. You can leave the hands unattached if you chose, or glue them to the body.

Download: A4 / Letter

GASTLY CHIBI

092 / GASTLY - Chibi - Pokémon Papercraft

Name: Gengar
Type: Ghost/Poison
Species: Gas Pokémon
Height: 1.3 m (4′03″)
Weight: 0.1 kg (0.2 lbs.)
Interesting Facts: Gastly appears to be nothing more than a black ball of ghostly matter that is surrounded by a purple glow of smog. Gastly has big, white eyes and a mouth with a pair of fangs in it. Gastly's face is similar to Cloyster's, but the two Pokémon aren't related.

THE PAPER MODEL
Height: 6.2 cm/ 2.4 in
Width: 6.9 cm/ 2.7 in
Depth: 5.0 cm/ 2.0 in
Pages: 1
Pieces: 9
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers, and use the large cloud as a base.

Download: A4 / Letter

VULPIX CHIBI

037 / VULPIX - Chibi - Pokémon Papercraft

Name: Vulpix
Type: Fire
Species: Fox Pokémon
Height: 0.6 m (2′00″)
Weight: 9.9 kg (21.8 lbs.)
Interesting Facts: Vulpix is a small, fox-like Pokémon that has a red-brown pelt, brown, pupil-less eyes and six orange tails. Vulpix also has what looks like orange bangs across its forehead as well as locks. At birth, Vulpix has only one white tail, which apparently splits and grows more beautiful and warmer as it grows older. Vulpix has a cream underbelly, and brown feet with lighter-brown colored paw pads. Vulpix also has a flame inside its body that never goes out.

THE PAPER MODEL
Height: 6.9 cm/ 2.7 in
Width: 7.2 cm/ 2.8 in
Depth: 8.3 cm/ 3.3 in
Pages: 1
Pieces: 11
Level: Easy
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers, building the head, tail, and body separately. Attach the head to the body, then tail to the body.

Download: A4 / Letter

MR. MIME

122 / MR. MIME - Pokémon Papercraft

Name: Mr. Mime
Type: Psychic/Fairy
Species: Barrier Pokémon
Height: 1.3 m (4′03″)
Weight: 54.5 kg (120.1 lbs.)
Interesting Facts: Mr. Mime has a round, white body with a red spot in the middle. Its light-pink arms and legs are connected to its body by red spheres. Mr. Mime has white, five-fingered hands and black feet that curl upward at the end. Mr. Mime has a pink head with red cheeks and blue, frizzy hair.

THE PAPER MODEL
Height: 17.9 cm/ 7.0 in
Width: 19.4 cm/ 7.6 in
Depth: 15.5 cm/ 6.1 in
Pages: 6
Pieces: 67
Level: Medium
Designer: Brandon
Photo: Olber
NOTES: Follow the numbers, being a bit careful with the arms and legs, especially the hands. Close at the back of the legs as indicated by numbers. Put a little weight in the center of the body to make it more stable. Multiple textures included for facial changes, need pdo to use the textures.

Download: A4 / Letter

GOLBAT

042 / GOLBAT - Pokémon Papercraft

Name: Golbat
Type: Poison/Flying
Species: Bat Pokémon
Height: 1.6 m (5′03″)
Weight: 55.0 kg (121.3 lbs.)
Interesting Facts: Golbat has a large mouth with four fangs. It now has a small pair of eyes. Golbat has a short pair of legs that possess only one toe each, and the tails it possessed as a Zubat seem to have disappeared. Golbat's ears are much smaller compared to Zubat's, being triangular in shape and having ear insides that do not appear chambered. Golbat's wings, unlike Zubat, also only have one 'finger' instead of two.

THE PAPER MODEL
Height: 16.3 cm/ 6.4 in
Width: 30.7 cm/ 12.1 in
Depth: 8.9 cm/ 3.5 in
Pages: 4
Pieces: 26
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers, being a bit careful with the way the wings and ears go together. Close at the bottom, and attach the feet. Put a little weight in the tongue to make it stand. Further instructions included in the pack.

Download: A4 / Letter

GOLBAT CHIBI

042 / GOLBAT - Chibi - Pokémon Papercraft

Name: Golbat
Type: Poison/Flying
Species: Bat Pokémon
Height: 1.6 m (5′03″)
Weight: 55.0 kg (121.3 lbs.)
Interesting Facts: Golbat has a large mouth with four fangs. It now has a small pair of eyes. Golbat has a short pair of legs that possess only one toe each, and the tails it possessed as a Zubat seem to have disappeared. Golbat's ears are much smaller compared to Zubat's, being triangular in shape and having ear insides that do not appear chambered. Golbat's wings, unlike Zubat, also only have one 'finger' instead of two.

THE PAPER MODEL
Height: 6.3 cm/ 2.5 in
Width: 14.0 cm/ 5.5 in
Depth: 4.5 cm/ 1.8 in
Pages: 1
Pieces: 16
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers, being a bit careful with the way the wings and ears go together. Close at the bottom, with the attaching of the feet.

Download: A4 / Letter

ZUBAT CHIBI

041 / ZUBAT - Chibi - Pokémon Papercraft

Name: Zubat
Type: Poison/Flying
Species: Bat Pokémon
Height: 0.8 m (2′07″)
Weight: 7.5 kg (16.5 lbs.)
Interesting Facts: Zubat is a small, blue bat-like Pokémon. It has two long, skinny legs. Zubat's face lacks any eyes and a nose. The insides of Zubat's ears and undersides of its wings are purple. Zubat's wings are supported by elongated 'fingers', and four teeth can be discerned from inside its mouth, two on the lower jaw and two on the upper.

THE PAPER MODEL
Height: 8.8 cm/ 3.5 in
Width: 7.5 cm/ 3.0 in
Depth: 8.5 cm/ 3.3 in
Pages: 1
Pieces: 20
Level: Easy/Medium
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers, being a bit careful with the way the wings and ears go together. Close at the bottom, and then attach the feet.

Download: A4 / Letter

HONCHKROW

430 / HONCHKROW - Pokémon Papercraft

Name: Honchkrow
Type: Dark/Flying
Species: Big Boss Pokémon
Height: 0.9 m (2′11″)
Weight: 27.3 kg (60.2 lbs.)
Interesting Facts: Honchkrow is roughly twice the size of its pre-evolution, Murkrow. Its feathers are mainly dark blue, while the underside of its wings is partially red. The tail's base is a white, cylindrical stalk, on which there is a growth of red feathers on the end. Honchkrow has a white and prominent crest of feathers on its chest that bears resemblance to a beard or cravat. Honchkrow has black feet with four toes, arranged in similar fashion as Murkrow's. Its head is supported by a broad and short neck. It has a slightly curved, yellow beak. The circular eyes have a white cornea and the pupils are red. It has dark blue eyelids. A large feather crest on its head makes it appear to be wearing a fedora hat that has spikes extending from the back. Its specific coat of feathers make it bear vague resemblance to a man dressed in a formal suit and a hat.

THE PAPER MODEL
Height: 21.0 cm/ 8.3 in
Width: 24.4 cm/ 9.6 in
Depth: 29.8 cm/ 11.7 in
Pages: 10 (3 additional pages for optional wings)
Pieces: 84
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers while building, and refer to the included Edge ID pdf if needed to be sure of how tabs line up. Definitely refer to the pdo if possible, as the spikes of the tail get a bit confusing. Close at the rear, adding the closed wing before completely closing the body. Attach the tail to the small 'feathers' on the rear. Last three pages include optional wings if you would like to modify the appearance by switching out wings. The wings included in the template on pages 7-9 are those featured in the picture. Choose one left wing and one right wing if you plan on switching around wings, regardless of which you choose.
Wings are labelled. Also, when building it with one open wing, a considerable amount of weight must be added to the rear of the body (near the tail, but not in the tail) in order to counter balance it. Additional instructions included.

Download: A4 / Letter

HONCHKROW CHIBI

430 / HONCHKROW - Chibi - Pokémon Papercraft

Name: Honchkrow
Type: Dark/Flying
Species: Big Boss Pokémon
Height: 0.9 m (2′11″)
Weight: 27.3 kg (60.2 lbs.)
Interesting Facts: Honchkrow is roughly twice the size of its pre-evolution, Murkrow. Its feathers are mainly dark blue, while the underside of its wings is partially red. The tail's base is a white, cylindrical stalk, on which there is a growth of red feathers on the end. Honchkrow has a white and prominent crest of feathers on its chest that bears resemblance to a beard or cravat. Honchkrow has black feet with four toes, arranged in similar fashion as Murkrow's. Its head is supported by a broad and short neck. It has a slightly curved, yellow beak. The circular eyes have a white cornea and the pupils are red. It has dark blue eyelids. A large feather crest on its head makes it appear to be wearing a fedora hat that has spikes extending from the back. Its specific coat of feathers make it bear vague resemblance to a man dressed in a formal suit and a hat.

THE PAPER MODEL
Height: 7.1 cm/ 2.8 in
Width: 6.3 cm/ 2.5 in
Depth: 8.5 cm/ 3.3 in
Pages: 1
Pieces: 17
Level: Easy
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers while building, building the head, hat, and body separately. Attach the parts in any order, being sure the tail rests to balance the model.

Download: A4 / Letter

MURKROW

198 / MURKROW - Pokémon Papercraft

Name: Murkrow
Type: Dark/Flying
Species: Darkness Pokémon
Height: 0,5 m (1′08″)
Weight: 2.1 kg (4.6 lbs.)
Interesting Facts: Murkrow is a small bird Pokémon with black feathers. Murkrow's shaggy, feathery tail bears the resemblance of the end of a broom, especially with the small, short, red-colored rod-like beginning segment of it. Murkrow has a crooked, yellow beak that resembles a witch's nose, a feather-crest that resembles a witch's hat and semi-circular eyes with red pupils. Murkrow’s neck seems thin in comparision to the size of the head it supports, with an extension of feathers on its neck like a collar. Murkrow has four toes on its yellow feet, three forward and one backward.

THE PAPER MODEL
Height: 18.0 cm/ 7.1 in
Width: 31.5 cm/ 12.4 in (includes second set of wings)
Depth: 18.2 cm/ 7.2 in
Pages: 3 (1 additional for optional 2D wings)
Pieces: 60
Level: Medium/Hard
Designer: Brandon
Photo: Toshi
NOTES: Follow the numbers while building, and refer to the included Edge ID pdf if needed to be sure of how tabs line up. Definitely refer to the pdo if possible, as the spikes of the tail get a bit confusing. Close at piece 48 (the chest). If you choose, you can opt for the simpler 2D wings included on the last page. Instead of making parts 20-37, make 57-60 and attach them in their place. Parts 57 and 59 will go in between the layers of 58 and 60, near the base of the wing, in order to create a '3D' surface to attach to the body.

Download: A4 / Letter

FLOATZEL

419 / FLOATZEL - Pokémon Papercraft

Name: Floatzel
Type: Water
Species: Sea Weasel Pokémon
Height: 1.1 m (3′07″)
Weight: 33.5 kg (73.9 lbs.)
Interesting Facts: Floatzel appears to be based on an otter or weasel, with two pointed blue fins on its arms and two tails, as with its pre-evolution, Buizel. The yellow flotation device it had as a Buizel appears to have grown and now functions as a boat. It gives the impression of a swimmer with a towel draped around its shoulders. If Floatzel laid on its back, the structure round its neck could also be interpreted as a sort of inflatable dinghy using its tails much like its pre-evolution, as a propeller and its fins as oars. The small fins on Buizel's forelimbs have grown into fully-fledged fins that are used for Razor Wind attacks. Its forelimbs and tails are tipped with cream coloration, and there is a teardrop-shaped orange pattern voided in Floatzel’s cream lower belly. Floatzel also has a circular cream spot in the center of its head, cream-colored eyelids and a pattern of two black triangles on the edges of its cream muzzle, unlike Buizel.


THE PAPER MODEL
Height: 19.8 cm/ 7.8 in
Width: 17.8 cm/ 7.0 in
Depth: 22.4 cm/ 8.8 in
Pages: 4
Pieces: 67
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers while building, and refer to the pdo if possible. Build from the head down, completing the tube, then the back before closing the bottom. Attach the tails before making the legs, and close at the bottom of the feet. Print piece 38 twice in order to build it as a different gender (Male=2 spots, Female=1 spot).

Download: A4 / Letter

LUXRAY

405 / LUXRAY - Pokémon Papercraft

Name: Luxray
Type: Electric
Species: Gleam Eyes Pokémon
Height: 1.4 m (4′07″)
Weight: 42.0 kg (92.6 lbs.)
Interesting Facts: Luxray are extremely vicious and predatorial, although when tamed and trained correctly they can become very loyal and faithful, protecting their Trainer from danger. They tend to be stubborn and can administer extreme amounts of power through their electricity. Because of their flawless x-ray like vision, practically nothing can go unseen by their eyes. Abusing a Luxray can cause it to become antagonistic and vengeful towards their Trainer. Luxray need a lot of compassion and praise to maintain their satisfaction, as they are proud creatures. While generally independent, Luxray may band together in large groups and look out for one another in the wild.

THE PAPER MODEL
Height: 19.8 cm/ 7.8 in
Width: 10.5 cm/ 4.1 in
Depth: 18.7 cm/ 7.4 in
Pages: 5
Pieces: 79
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers while building, and refer to the included Edge ID pdf if needed to be sure of how tabs line up. Definitely refer to the pdo if possible, as the spikes get a bit confusing. Attach the tail and spikes before the rear legs, and close at the bottom of the feet.

Download: A4 / Letter

FLOATZEL CHIBI

419 / FLOATZEL - Chibi - Pokémon Papercraft

Name: Floatzel
Type: Water
Species: Sea Weasel Pokémon
Height: 1.1 m (3′07″)
Weight: 33.5 kg (73.9 lbs.)
Interesting Facts: Floatzel appears to be based on an otter or weasel, with two pointed blue fins on its arms and two tails, as with its pre-evolution, Buizel. The yellow flotation device it had as a Buizel appears to have grown and now functions as a boat. It gives the impression of a swimmer with a towel draped around its shoulders. If Floatzel laid on its back, the structure round its neck could also be interpreted as a sort of inflatable dinghy using its tails much like its pre-evolution, as a propeller and its fins as oars. The small fins on Buizel's forelimbs have grown into fully-fledged fins that are used for Razor Wind attacks. Its forelimbs and tails are tipped with cream coloration, and there is a teardrop-shaped orange pattern voided in Floatzel’s cream lower belly. Floatzel also has a circular cream spot in the center of its head, cream-colored eyelids and a pattern of two black triangles on the edges of its cream muzzle, unlike Buizel.


THE PAPER MODEL
Height: 9.0 cm/ 3.5 in
Width: 6.8 cm/ 2.7 in
Depth: 10.0 cm/ 3.9 in
Pages: 1
Pieces: 15
Level: Easy
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers while building. Build the head, the tube, the body, and tail, but do not attach them until all are built. Then attach them in the following order: Tube to Body, Head to Tube+Body, and then Tail at the end. Attach the fins to the arms after all of the parts are together.
Default file is female Floatzel, but textures are included to change from male to female. (Male=2 spots, Female=1 spot).

Download: A4 / Letter

LUXRAY CHIBI

405 / LUXRAY - Chibi - Pokémon Papercraft

Name: Luxray
Type: Electric
Species: Gleam Eyes Pokémon
Height: 1.4 m (4′07″)
Weight: 42.0 kg (92.6 lbs.)
Interesting Facts: Luxray are extremely vicious and predatorial, although when tamed and trained correctly they can become very loyal and faithful, protecting their Trainer from danger. They tend to be stubborn and can administer extreme amounts of power through their electricity. Because of their flawless x-ray like vision, practically nothing can go unseen by their eyes. Abusing a Luxray can cause it to become antagonistic and vengeful towards their Trainer. Luxray need a lot of compassion and praise to maintain their satisfaction, as they are proud creatures. While generally independent, Luxray may band together in large groups and look out for one another in the wild.

THE PAPER MODEL
Height: 7.0 cm/ 2.8 in
Width: 4.9 cm/ 1.9 in
Depth: 8.6 cm/ 3.4 in
Pages: 1
Pieces: 22
Level: Easy
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers while building. Close the head at the bottom, and close the body at the back. Attach the 2D parts after closing. Color the backings of 13 and 14, so they are not white.

Download: A4 / Letter

MIROR B.

MIROR B. - Pokémon Papercraft
Name: Miror B.
Species: Trainer
Appearance: Pokémon Colosseum, Pokémon XD: Gale of Darkness
Interesting Facts: In Pokémon Colosseum, Miror B. is one of the four Cipher Admins. A man with a gigantic two-toned Afro (which resembles a Poké Ball turned on its side), garish glasses, and dressed in a golden sequin-studded leisure suit, Miror B. is the definition of "loud and flamboyant." He spoils his Pokémon and would rather spend time teaching them how to dance than fulfilling his duties as a Cipher Admin. An example of this is seen in Pyrite Town, where he basically lets his grunts do whatever they want as long as they leave him alone so he can practice his dancing.

THE PAPER MODEL
Height: 33.3 cm/ 13.1 in
Width: 15.9 cm/ 6.3 in
Depth: 11.9 cm/ 4.7 in
Pages: 6
Pieces: 52
Level: Medium/Hard
Designer: Brandon
Photo: Olber
NOTES: Follow the numbers, build from the 'fro downward. Close at the base of the leg, and attach the feet. Be sure they are level, as it will help stabilize the model.
This model portrays Miror B. in his Colosseum outfit, not the purple jumpsuit he wears in XD.

Download: A4 / Letter

LUDICOLO

272 / LUDICOLO - Pokémon Papercraft
Name: Ludicolo
Type: Water/Grass
Species: Carefree Pokémon
Height: 1.5 m (4'11″)
Weight: 55.0 kg (121.3 lbs.)
Interesting Facts: Ludicolo is a mixture of a pineapple and a duck (or possibly a platypus). Ludicolo appears to sport a poncho and a green sombrero, which looks similar to a lily pad. It is colored yellow with black eyes and an orange bill. Its green, somewhat mitten-like hands are extremely large in comparison to other Pokémon's hands, and has two black lines of markings on its palms. There is a large, green sombrero-like feature on its head, with a short brown stem coming out of the top of it with a yellow spiky upper portion. There are several dark yellow stripes on its body and around its eyes is a patch of green. Ludicolo's legs are thick, green and sport a pattern of a black circle on the foot's underside.

THE PAPER MODEL
Height: 18.1 cm/ 7.1 in
Width: 14.6 cm/ 5.7 in
Depth: 16.1 cm/ 6.3 in
No. of Pages: 8
No. of Pieces: 56
Level: Hard
Designer: Brandon
Photo: Olber
NOTES: Build from the top of the head, following the numbers. Build the sombrero first, and then the head starting at the top, and attach them. Close at the bottom, attaching the legs to the flat underside.

Download: A4 / Letter

SHEDINJA

292 / SHEDINJA - Pokémon Papercraft
Name: Shedinja
Type: Bug/Ghost
Species: Shed Pokémon
Height: 0.8 m (2'07″)
Weight: 1.2 kg (2.6 lbs.)
Interesting Facts: Shedinja's body is based on an insect's shed exoskeleton. Therefore, its body is completely hollow (it possesses no internal organs). The shell consists of chitin and is entirely incapable of movement. As it is the shed shell of a fully developed Ninjask, it has a similar shape to the latter. Shedinja's entire body is brown in color; the abdomen is of a darker shade. There are four protrusions where Ninjask's limbs were growing. What appears to be its eyes are actually slits; perhaps formerly for the Ninjask the shell housed to look through. Shedinja has one pair of what appear to be tattered "wings" on its back, which is actually where the exoskeleton was torn by Ninjask to break free of the shell. Between its "wings" there is a hole, out of which the Ninjask escaped. Each "wing" divides into three smaller pieces. These "wings" actually don't perform any function, as Shedinja's body is immobile and levitates. Two horizontal lines circle its abdomen. A white halo constantly floats above its head.

THE PAPER MODEL
Height: 14.0 cm/ 5.5 in
Width: 15.0 cm/ 5.9 in
Depth: 15.3 cm/ 6.0 in
No. of Pages: 3
No. of Pieces: 23
Level: Easy/Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the top of the head, following the numbers. When it comes to making the wings, sandwich the black pieces between both layers of the wings, and glue that whole piece onto the back (Pictures included for reference). Cut out the white part of the back to allow for this piece. Close at the bottom.
Base includes both Letter and A4.

Download: A4 / Letter / Base

SPIRITOMB CHIBI

442 / SPIRITOMB - Chibi - Pokémon Papercraft
Name: Spiritomb
Type: Ghost/Dark
Species: Forbidden Pokémon
Height: 1.0 m (3′03″)
Weight: 108.0 kg (238.1 lbs.)
Interesting Facts: Spiritomb are thought to be evil Pokémon. They tend to go on destructive rampages like Gyarados. It is said to act as a hive-mind, with all of the souls that comprise it acting in unison towards the same goal. It is not known to evolve into or from any other Pokémon.

THE PAPER MODEL
Height: 10.0 cm/ 3.9 in
Width: 10.7 cm/ 4.2 in
Depth: 8.6 cm/ 3.4 in
Pages: 1
Pieces: 14
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Build from bottom up, attaching the 'neck' and head to the rock/body. Green parts can attach to head in any order, so they are not numbered. Instructions also included.

This is also the first of many 'Chibi' models that will be labeled My Pokemon Ranch (game of origin). They're much simpler than their normal counterparts, and will usually be a single page.

Download: A4 / Letter