CACTURNE (Merry Christmas! 2/2)

332 / CACTURNE - Pokémon Papercraft

Name: Cacturne
Type: Grass/Dark
Species: Scarecrow Pokémon
Height: 1.3 m (4′03″)
Weight: 77.4 kg (170.6 lbs.)
Interesting Facts: Cacturne has numerous poisonous abilities. In addition, Cacturne's body retains moisture throughout the hot daylight hours. After spending thousands of years in harsh deserts, its blood transformed into the same substances as sand.

THE PAPER MODEL
Height: 20.5 cm/ 8.1 in
Width: 17.6 cm/ 6.9 in
Depth: 10.0 cm/ 3.9 in
Pages: 4
Pieces: 45
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Build the model starting from the hat. Be carefull when closing it, it's the only tricky part.
Glue it to the face right after the 1st segment of the face is built. Work your way down, attaching the spikes as you go. Close at the legs.

Download: A4 / Letter

BIBAREL (Merry Christmas! 1/2)

400 / BIBAREL - Pokémon Papercraft

Name: Bibarel
Type: Normal/Water
Species: Beaver Pokémon
Height: 1.0 m (3′03″)
Weight: 31.5 kg (69.4 lbs.)
Interesting Facts: Bibarel are large, bulky, brown beaver-like rodent Pokémon, and more bipedal than their pre-evolution. Bibarel have tan "masks", on their faces and rumples on the sides. There are tan "bibs" on their chests, and they have large, broad dark-brown tails with a wavy tan pattern on them.

THE PAPER MODEL
Height: 15.3 cm/ 6.0 in
Width: 15.9 cm/ 6.3 in
Depth: 21.0 cm/ 8.3 in
Pages: 4
Pieces: 27
Level: Easy/Medium
Designer: Brandon
Photo: LuIS
NOTES: This model is pretty straightforward, but it's also important to follow the numbers.
Start at the mouth, build the face around it. Close at the bottom. Add the tail after, also, keep note
that the tail can be positioned at the builder's will, but the position on the pdo is a more stable one.
Further instructions included on the template.

Download: A4 / Letter

LEAF

POKEMON TRAINER LEAF - Pokémon Papercraft
Name: Leaf (Green/Blue in Manga)
Species: Trainer
Height: 1.4 m (4′07″)
Interesting Facts: A person who raises Pokémon and trains them as partners in battle. In battle, a Trainer gives orders to the Pokémon and uses items. It's not an exaggeration to say battles can be won or lost on a Trainer's single strategic move. Trainers pour their hearts into their Pokémon and share anger, sadness, and joy as they adventure in hopes of becoming Pokémon Masters.

THE PAPER MODEL
Height: 18.8 cm/ 7.4 in
Width: 10.8 cm/ 4.3 in
Depth: 5.6 cm/ 2.2 in
Pages: 4 + 1 for Optional Pokeballs
Pieces: 90 + Optional Pokeballs
Level: Hard
Designer: Brandon
Base Model made by Vert092
Photo: LuIS
NOTES: Notes/numbers included. Build the upper and lower body separately, and close the model by attaching them together at the waist. Arms and fingers are particularly tricky- this is a hard craft, take your time and be careful with it.
Pokeballs included are slightly smaller than those included with Red- they are not interchangable. Those included here are 'belted PokeBalls' as opposed to the slightly enlarged battling/catching PokeBalls. General scale of crafts are similar.

Also included is an additional texture pack including the base textures, as well as a variant for the Manga outfit. (PDO usage needed for changing of textures)

Download: A4 / Letter - Texture Pack

FERROTHORN

598 / FERROTHORN - Pokémon Papercraft
Name: Ferrothorn
Type: Grass/Steel
Species: Thorn Pod Pokémon
Height: 1.0 m (3' 03")
Weight: 110.0 kg (242.5 lbs)
Interesting Facts: Ferrothorn is a Pokémon resembling a flattened durian made of metal. Its body is covered in metal thorns, with three black stripes circling its width, the lower stripe having triangular decorations below the eyes of Ferrothorn. Its eyes have green rims, yellow scleras, and dark pupils. There is a green spike at the top of its body, and extending around it are vine-like, long green appendages tipped with spiky metal disks.

THE PAPER MODEL
Height: 13.3 cm/ 5.2 in
Width: 22.0 cm/ 8.7 in
Depth: 18.9 cm/ 7.4 in
No. of Pages: 4 (Choose between last two pages)
Level: Medium-Hard
Designer: Brandon
Photo: LuIS
NOTES: Build the body from top down, closing at the bottom. Attach spikes as you go. Build the feelers as well, and attach before closing to allow pressure from the inside when attaching to the body. Do not build both of the last pages. Build page 4 to get a result as pictured, or build page 5 to get a more tripod-like antennae setup. The model stands without weight either way, so long as the antennae are placed in a triangular/balanced pattern. Further notes/numbers on template.

Download: A4 / Letter

PUPITAR v2

247 / PUPITAR V2- Pokémon Papercraft
Name: Pupitar
Type: Rock/Ground
Species: Hard Shell Pokémon
Height: 1.2 m (3' 11")
Weight: 72.0 kg (158.7 lbs)
Interesting Facts: Pupitar are somewhat large Pokémon that are encased inside a thick shell made of grayish-blue rock. They have several spikes and holes for eyes and what appears to be eyebrows, but are actually triangular openings. Since its arms and legs are developing inside the shell, Pupitar are capable of venting gas to propel themselves around.

THE PAPER MODEL
Height: 16.0 cm/ 6.3 in
Width: 11.5 cm/ 4.5 in
Depth: 13.8 cm/ 5.4 in
No. of Pages: 3
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build the mask and body separately, and attach the body segments before attaching the mask. Each segment of the body closes in itself, to strengthen the body and make it easier to connect.

Download: A4 / Letter

GLACEON v2: Mini

471 / GLACEONv2 Mini- Pokémon Papercraft

Name: Glaceon
Type: Ice
Species: Fresh Snow Pokémon
Height: 0.8 m (2′07″)
Weight: 25.9 kg (57.1 lbs.)
Interesting Facts: Glaceon is a fox-like creature covered in light-blue fur, which can be frozen into sharp quills. It appears to be wearing a tuque on its head. Glaceon's inner ears, two spots on its back, tail end and cap-endings are all rhombus-shaped and darker blue, in contrast to the soft cyan main body color. Glaceon's feet are also a dark blue color, giving it the impression of wearing boots.

THE PAPER MODEL
Height: 8.0 cm/ 3.1 in
Width: 7.3 cm/ 2.9 in
Depth: 5.4 cm/ 2.1 in
Pages: 1
Pieces: 32
Level: Medium
Designer: PODragon
Photo: PODragon
NOTES: The minee-veelutions have turned into a mini-series! Enjoy glaceon, whose biggest complaint is in the small, dainty paws.
Build as you would with umbreon; build the legs first, attaching them as you build the body (starting at the head). Attach her 'hair', then her forehead crest. Then ears and, finally, tail! Enjoy your ice puppy.

Download: A4 / Letter

Umbreon v1

UNOWN X

201 / UNOWN X - Pokémon Papercraft

Name: Unown - X
Type: Psychic
Species: Symbol Pokémon
Height: 0.5 m (1′08″)
Weight: 5.0 kg (11.0 lbs.)
Interesting Facts: Unown are floating, flat, eye-shaped Pokémon with appendages that make them resemble letters. They are black all over. All alphabetic Unown have fully open eyes while the two punctuation Unown have half-closed eyes.

THE PAPER MODEL
Height: 5.0 cm/ 1.3 in
Width: 16.6 cm/ 3.4 in
Depth: 16.6 cm/ 6.8 in
Pages: 3
Pieces: 22
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the eye outward, closing with the back. Attach stems/appendages as soon as possible. Pieces are numbered as well.

Download: A4 / Letter

UMBREON v2: Mini

197 / UMBREONv2 Mini- Pokémon Papercraft

Name: Umbreon
Type: Dark
Species: Moonlight Pokémon
Height: 1.0 m (3' 3")
Weight: 27.0 kg (59.5 lbs)
Interesting Facts: When agitated, this Pokémon protects itself by spraying poisonous sweat from its pores. Also, on the night of a full moon, or when it gets excited, the ring patterns on its body glow yellow. It evolves from Eevee by Happiness during the night or when around a Moon Shard.

THE PAPER MODEL
Height: 8.0 cm/ 3.1 in
Width: 9.4 cm/ 3.7 in
Depth: 5.2 cm/ 2.0 in
Pages: 1
Pieces: 32
Level: Medium
Designer: PODragon
Photo: PODragon
NOTES: Another small model, but an easier build than Vaporeon. Start at the bottom of its head, building legs separately and attaching them as you go. Save the ears and tail for last. I also recommend printing with edge padding (when the tab is colored slightly next to the piece itself) because, as you can see by my picture, white lines show too well on this model.

Download: A4 / Letter

Umbreon v1

ZOROARK - (Happy Halloween!)

571 / ZOROARK - Pokémon Papercraft

Name: Zoroark
Type: Dark
Species: Illusion Fox Pokémon
Height: 1.6 m (5′03″)
Weight: 81.1 kg (178.8 lbs.)
Interesting Facts: Zoroark is a bipedal fox-like Pokémon, and mainly grayish-brown in coloration with crimson and black accents. It has a pointed snout and ears, the insides of which have red coloration. Zoroark also has some red rimming its eyes and mouth. Zoroark has a large, voluminous mane, primarily red in coloration but with black tips. The mane also somewhat resembles a ponytail, as a teal bangle down its length separates a mass of the mane from the lower portion.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 26.3 cm/ 10.4 in
Depth: 18.5 cm/ 7.3 in
Pages: 5
Pieces: 101
Level: Hard
Designer: Brandon
Photo: Carnilmo
NOTES: Build from head down, attaching teeth, arms, and legs as you go. Be careful with the teeth, they're tiny. Further instructions are included.

Download: A4 / Letter

URSARING

217 / URSARING - Pokémon Papercraft

Name: Ursaring
Type: Normal
Species: Hibernator Pokémon
Height: 1.8 m (5′11″)
Weight: 125.8 kg (177.3 lbs.)
Interesting Facts: Ursaring are known for their food-collecting habits; they often walk through forests in the mornings to collect Berries. They also have an excellent sense of smell and use it to find and dig up food buried deep underground. They have been observed scratching trees, leaving marks which show that they bear good fruit. Despite their large size, they are able to find food and sleep in the treetops, although they still prefer to snap trees with their forelegs and eat the fallen Berries.

THE PAPER MODEL
Height: 20.0 cm/ 7.9 in
Width: 15.2 cm/ 6.0 in
Depth: 14.7 cm/ 5.8 in
Pages: 4
Pieces: 57
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the head down, attaching everything along the way. Close at the bottom of the feet.

Download: A4 / Letter

ARTICUNO

144 / ARTICUNO - Pokémon Papercraft

Name: Articuno
Type: Ice/Flying
Species: Freeze Pokémon
Height: 1.7 m (5′07″)
Weight: 55.4 kg (122.1 lbs.)
Interesting Facts: Articuno first appeared in the second movie. Lawrence III attempted to collect Articuno and the two other legendary birds in his scheme to capture Lugia. Also, the Frontier Brain Noland uses an Articuno against certain challengers, as seen in the episode Numero Uno Articuno and The Symbol Life, when he accepted Ash's challenge and battled against him.

THE PAPER MODEL
Height: 14.6 cm/ 5.7 in
Width: 38.3 cm/ 15.1 in (Wing span)
Depth: 34.7 cm/ 13.7 in
Pages: 4
Pieces: 47
Level: Medium
Designer: PODragon
Photo: Carnilmo
NOTES: Build from the beak back, attaching wings and feet as you go. Be careful with the wings- you'll need to reinforce them somehow- Carnilmo recommends inserting a toothpick into them after the wings are attached to the body. Feel free to experiment though, at your own risk :p Further notes included in the packs.

Download: A4 / Letter

VAPOREON v2: Mini

134 / VAPOREONv2 Mini- Pokémon Papercraft

Name: Vaporeon
Type: Water
Species: Bubble Jet Pokémon
Height: 1.0 m (3'03″)
Weight: 29.0 kg (63.9 lbs.)
Interesting Facts: Vaporeon are highly adapted to aquatic life. Unlike its pre-evolution, it has the ability to breathe underwater. As stated previously, they have a unique molecular structure. They have the ability to "melt" into a body of water and disappear completely from view.

THE PAPER MODEL
Height: 7.5 cm/ 3.0 in
Width: 7.0 cm/ 2.8 in
Depth: 7.2 cm/ 2.8 in
Pages: 1
Pieces: 49
Level: Medium
Designer: PODragon
Photo: PODragon
NOTES: Since it's so small, it might be a little tricky. Build the head and body separate, joining them on the neck frill. Attach the back frill as you build the body, and attach the tail piece when the body is complete. Help included in pack.

Download: A4 / Letter

Vaporeon v1

DARUMAKA

554 / DARUMAKA - Pokémon Papercraft

Name: Darumaka
Type: Fire
Species:  Zen Charm Pokémon
Height: 0.6 m (2'00″)
Weight: 37.5 kg (82.7 lbs.)
Interesting Facts: Darumaka is a red, circular Pokémon. Above its eyes are yellow curly eyebrows and its face is orange. Three yellow ovals are on its abdomen and a curvy yellow line is on its back. Its paws are orange and have three digits each.

THE PAPER MODEL
Height: 11.5 cm/ 4.5 in
Width: 16.4 cm/ 6.5 in
Depth: 11.3 cm/ 4.4 in
Pages: 2
Pieces: 41
Level: Easy/Medium
Designer: Brandon
Photo: Brandon
NOTES: Build from the head down, attaching the eyebrows and arms when possible. Close at the legs, and attach the feet afterward. The only particularly tricky parts here are the feet and hands. I strongly recommend doing the 2D hands, unless you're up for a challenge.

Download: A4 / Letter

UNOWN - Z

201 / UNOWN Z - Pokémon Papercraft

Name: Unown - Z
Type: Psychic
Species: Symbol Pokémon
Height: 0.5 m (1′08″)
Weight: 5.0 kg (11.0 lbs.)
Interesting Facts: Unown are floating, flat, eye-shaped Pokémon with appendages that make them resemble letters. They are black all over. All alphabetic Unown have fully open eyes while the two punctuation Unown have half-closed eyes.

THE PAPER MODEL
Height: 3.2 cm/ 1.3 in
Width: 8.6 cm/ 3.4 in
Depth: 17.3 cm/ 6.8 in
Pages: 2
Pieces: 16
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the eye outward, closing with the back. Attach stems/appendages as soon as possible. Pieces are numbered as well.

Download: A4 / Letter

UNOWN - Y

201 / UNOWN Y - Pokémon Papercraft

Name: Unown - Y
Type: Psychic
Species: Symbol Pokémon
Height: 0.5 m (1′08″)
Weight: 5.0 kg (11.0 lbs.)
Interesting Facts: Unown are floating, flat, eye-shaped Pokémon with appendages that make them resemble letters. They are black all over. All alphabetic Unown have fully open eyes while the two punctuation Unown have half-closed eyes.

THE PAPER MODEL
Height: 3.4 cm/ 1.3 in
Width: 17.0 cm/ 6.7 in
Depth: 12.2 cm/ 4.8 in
Pages: 2
Pieces: 25
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the eye outward, closing with the back. Attach stems/appendages as soon as possible.

Download: A4 / Letter

GARCHOMP

445 / GARCHOMP - Pokémon Papercraft

Name: Garchomp
Type: Dragon/Ground
Species: Mach Pokémon
Height: 1.9 m (6′03″)
Weight: 95.0 kg (209.4 lbs.)
Interesting Facts: Garchomp are dark blue, with a red underbelly that covers from the middle of its abdomen, to its jaws, and then to the undersides of its arms. Underneath the red is a gold diamond shape as well a gold cross on its snout; which gives Garchomp a close resemblance to Sharpedo, with close to the same body color as it. Garchomp have appendages that resemble jets, planes and hammerhead sharks; its four fins, one on each arm, one dorsal fin and another on its tail that resembles a shark tailfin; horns that resemble jet/plane engines rest on its head, resembling a hammerhead. It has spikes on its hind limbs and arms as well as sharper claws than its previous evolution. Its eyes have black scleras and gold-colored irises. Its pupils have shrunk.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 20.8 cm/ 8.2 in
Depth: 25.8 cm/ 10.2 in
Pages: 5
Pieces: 94
Level: Hard
Designer: Brandon
Photo: Carnilmo
NOTES: Build from head down, attaching teeth, arms, and fins as possible. Further notes included. It's a tough model, so if you're just starting out try something else as a warm up.

Download: A4 / Letter

Dear fellow papercrafters, 

 As we’re sure a few of you have noticed lately, model posting has kind of slowed below the expected schedule that we have kept since the start. A lot has been going around in our lives and the situation has led the team to be a little low on time, organization and even will to go on lately... And sadly, after talking together, we came to the conclusion that it won't be changing any time soon. 

Thus, after mutual agreement, we decided that we are not going to post models regularly anymore and also decided to take a break for a little while. We can tell you that there will be new models, just not when or how many. Of course, models already on the site will stay up and still be accessible. 

When we started Paperpokés, we were a bunch of friends who decided to get together and create things solely for the pure enjoyment of making Pokémon papercraft models. As sad as it can sound, a while ago we lost track of those simple reasons and started to view it not as a hobby, but as a job, where we had to produce new stuff before each deadlines even when we didn’t feel like it. This situation pretty much made each of us lose interest in making papercrafts one by one… 

Thank you everyone who encouraged us and followed us every Monday. We appreciate all of that and everyone who gave us the push to keep going for as long as we did. Without some support and encouragement, we wouldn't have even made it this far. 

However, as we said, sometimes the responsibility is too much, and we can't manage it. It was fun while it lasted, and it did indeed last for a long time (4 years in December) but everything must come to an end.

 We're just sorry it was so soon and abrupt. 

- The Paperpokés Team

Pick Your Poké By Its Generation (Illustrated)

(The pdo files included in the download packs

can be opened with Pepakura Viewer)

We won't answer any question about file formats, so
If a file doesn't open, read the FAQ above 
before asking for help. thanks.

WEEZING

110 / WEEZING - Pokémon Papercraft

Name: Weezing
Type: Poison
Species: Poison Gas Pokémon
Height: 1.2 m (3′11″)
Weight: 9.5 kg (20.9 lbs.)
Interesting Facts: It has been explicitly stated that Koffing, Weezing's pre-evolution, is able to hover in midair due to its gases being lighter than air. Although the same has never been explicitly stated for Weezing, it can be assumed that this is the case, as Weezing displays an ability to float in midair seemingly identical to Koffing's ability. It is, however, a known fact that a Weezing's gases are less dense than water, enabling it to float on the surface of water effortlessly, although this also means that Weezing is essentially unable to spend any amount of time underwater.

THE PAPER MODEL
Height: 10.9 cm/ 4.3 in
Width: 13.9 cm/ 5.5 in
Depth: 9.4 cm/ 3.7 in
Pages: 3
Pieces: 36
Level: Easy-Medium
Designer: Brandon
Photo: Olber
NOTES: Build the larger head first from top to bottom, then build the smaller one onto it from bottom up, closing at the top. Add small additional pieces once closed.

Download: A4 / Letter

FARFETCHD

083 / FARFETCH'D - Pokémon Papercraft

Name: Farfetch'd
Type: Normal/Flying
Species: Wild Duck Pokémon
Height: 0.8 m (2′07″)
Weight: 15.0 kg (33.1 lbs.)
Interesting Facts: Farfetch'd resemble brown, cartoon-like Mallard ducks, but Farfetch'd is always brown regardless of gender. It has a large head in proportion to its body, it has a yellow beak, and it bears a black plumage on its forehead that resembles eyebrows. Its body and head are primarily brown in coloration and it has a white underbelly. It has wings as big as its body which appear to be prehensile enough to work like hands, and it always holds a leek in one of these wings. It also has yellow legs with webbed feet.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 12.4 cm/ 4.9 in
Depth: 15.9 cm/ 6.3 in
Pages: 4
Pieces: 52
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: Build from the head down. Attach the wings as you go, so you can apply pressure from the inside, same with the feet. Close at the tip of the tail.

Download: A4 / Letter

PONYTA

077 / PONYTA - Pokémon Papercraft

Name: Ponyta
Type: Fire
Species: Fire Horse Pokémon
Height: 1.0 m (3′03″)
Weight: 30.0 kg (66.1 lbs.)
Interesting Facts: Ponyta's physiology is quite similar to that of a horse. However, its mane and tail are made of yellow and reddish-orange flames rather than the usual hair. Its fur is cream all over. It has four long legs, each ending in a single, gray hoof. These hooves are said to be harder than diamonds.

THE PAPER MODEL
Height: 15.2 cm/ 6.0 in
Width: 3.9 cm/ 1.5 in
Depth: 18.0 cm/ 7.1 in
Pages: 2
Pieces: 40
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from head down, close at the bottom of the rear legs. Attach the 'flames' with well placed glue. Further notes included in template.

Download: A4 / Letter

ZEKROM

644 / ZEKROM - Pokémon Papercraft

Name: Zekrom
Type: Dragon/Electric
Species: Deep Black Pokémon
Height: 2.9 m (9′06″)
Weight: 345.0 kg (760.6 lbs.)
Interesting Facts: Zekrom is a bipedal Pokémon of dragon- and dinosaur-like basis. Zekrom is mainly a shade of dark gray, with darker patches on various portions of its body. It has red eyes (although in some scenes its eyes are depicted as having white irises and red sclera) and a small horn-like protrusion on the tip of its snout, with its head sporting a plume tipped with light-blue coloration. At the base of its neck is a black, stud-like feature, and atop its shoulders are similar, larger features resembling armor padding. The bases of its wings also have such padding, and a fanned, splayed, seemingly webbed shape with a small "wing-spike" on one edge. The lower length of Zekrom's arms extenuate into splayed, seemingly webbed, somewhat baseball-mitt-like formations, with three-clawed, dark-colored hands on the undersides. The front portion of Zekrom's waist is black-colored, with its belly and thighs having thin striations down their length. Its knees are black, as are the foremost parts of its three-clawed feet and spiked heels. Zekrom's tail consists of large, round, conical and spiked formation, likened to an electricity generator, with a black inner portion and bands on the tip of the outside portion.

THE PAPER MODEL
Height: 28.6 cm/ 11.3 in
Width: 27.2 cm/ 10.7 in
Depth: 35.7 cm/ 14.1 in
Pages: 11
Pieces: 145
Level: Hard
Designer: Brandon
Photo: Skeleman
NOTES: Build from the head down. Be careful with the wings, shoulders, and hands, attaching limbs as you go. Attach the legs before moving to the tail, and close at the tip of the tail. Base included, as model is quite tail heavy. This is a difficult model, do not attempt without considerable experience.

Download: A4 / Letter

SHAYMIN SKY FORME CHIBI

492 / SHAYMIN SKY FORME CHIBI - Pokémon Papercraft
Name: Shaymin Sky Chibi
Type: Grass/Flying
Species: Gratitude Pokémon
Height: 0.4 m (1′04″)
Weight: 5.2 kg (11.5 lbs.)
Interesting Facts: Shaymin will change into Sky Forme and back if it touches a Gracidea. Shaymin can't be in this form at night or if it has contact with ice. Shaymin's Sky Forme has a canid-like appearance that also bears some resemblance to a small reindeer. It has a small, slender body. The fur on its back appears to have shifted into a mohawk; it has a red flower petal on the right side of its neck, looking like a scarf or cape, and flat, white ears that look like wings or antlers. It has a small ruff on the front of its neck and a stumpy tail.

THE PAPER MODEL
Height: 7.5 cm / 3.0 in
Width: 11.2 cm / 4.4 in
Depth: 6.1 cm / 2.4 in
Pages: 1
Pieces: 14
Level: Easy
Designer: Lyrin
Photo: Lyrin
NOTES: Follow the numbers on the template, starting from the head and going downward. Follow the .pdo and it wil be an easy build.

Download: A4 / Letter

MACHOKE

067 / MACHOKE - Pokémon Papercraft

Name: Machoke
Type: Fighting
Species: Superpower Pokémon
Height: 1.5 m (4′11″)
Weight: 70.5 kg (155.4 lbs.)
Interesting Facts: Machoke appear as larger, tailless Machop with red marks along their muscular arms. Their faces are more reptilian than before. The marks actually look like places where the skin has stretched apart because it can barely contain its huge muscles. Machoke wear black wrestling tights for better movement and a large, golden belt with a little red P on the buckle.

THE PAPER MODEL
Height: 17.5 cm/ 6.9 in
Width: 13.7 cm/ 5.4 in
Depth: 9.4 cm/ 3.7 in
Pages: 4
Pieces: 35
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: Build from the head down. Cut notches for the crests in the head. Attach the arms, moving downward, and close at the bottom of the legs.

Download: A4 / Letter

LEAFEON CHIBI

470 / LEAFEON CHIBI- Pokémon Papercraft

Name: Leafeon
Type: Grass
Species: Verdant Pokémon
Height: 1.0 m (3′03″)
Weight: 25.5 kg (56.2 lbs.)
Interesting Facts: Leafeon is a fox-like creature with plant, dog, and cat characteristics. Its body is tan colored. It has one shade of dark brown that is carried out on the tip of its paws, as its eye color, and in the center of the ear. It has sprouts growing all over it, making it look more like a plant. It has a longer sprout of its forehead. Leafeon ears and tail both share a leaf-like quality. Leafeon can use any attack that Eevee knows with the addition of Grass-type attacks. Its leaves are apparently quite sharp since it can learn Leaf Blade, X-Scissor, and other slicing attacks. As a fully-evolved Pokémon, Leafeon can learn Hyper Beam, and Giga Impact. It can also clean the air around it.

THE PAPER MODEL
Height: 7.5 cm / 3.0 in
Width: 6.6 cm / 2.6 in
Depth: 7.4 cm / 2.9 in
Pages: 1
Pieces: 25
Level: Easy
Designer: Lyrin
Photo: Lyrin
NOTES: Follow the numbers on the template, starting from the head and going downward. Follow the .pdo and it wil be an easy build.

Download: A4 / Letter

VILEPLUME

045 / VILEPLUME - Pokémon Papercraft

Name: Vileplume
Type: Grass/Poison
Species: Flower Pokémon
Height: 1.2 m (3′11″)
Weight: 18.6 kg (41.0 lbs.)
Interesting Facts: Vileplume has a Prussian blue-colored, bipedal body like its pre-evolutions, but has changed in that it now has a much larger "flower" on its head. This "flower" is slightly different from Gloom's flower, although it still resembles a rafflesia flower. Vileplume are said to have the largest petals in the world, and they contribute to a large percentage of their height. The size of the petals in relation to the rest of the body make Vileplume very sheltered from the sun, as the petals almost act as a sun visor.

THE PAPER MODEL
Height: 15.0 cm/ 5.9 in
Width: 29.4 cm/ 11.6 in
Depth: 27.2 cm/ 10.7 in
Pages: 8
Pieces: 44
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from the plume down, attaching arms and legs as you go. Close at the bottom of the legs. Refer to the pdo if possible, as not all of the 'leaves' of the plume are equal sizes.

Download: A4 / Letter

EXEGGUTOR

103 / EXEGGUTOR - Pokémon Papercraft

Name: Exeggutor
Type: Grass/Psychic
Species: Coconut Pokémon
Height: 2.0 m (6′07″)
Weight: 120.0 kg (264.6 lbs.)
Interesting Facts: Exeggutor is a tall Pokémon that strongly resembles a coconut or pineapple tree, but it has legs. Its legs and body resembles a tree trunk, and its legs are thick with two-toed feet and a light-yellow colored paw pad on the foot's underside. It has leaves sprouting from the top of its body, and Exeggutor has three to six round, light yellow heads that resemble coconuts. Similar to Exeggcute, each has varying facial expressions.

THE PAPER MODEL
Height: 21.0 cm/ 8.3 in
Width: 23.0 cm/ 9.1 in
Depth: 22.4 cm/ 8.8 in
Pages: 8
Pieces: 45
Level: Medium
Designer: Brandon
Photo: Olber
NOTES: Build from the feet up. Then build the leaves; refer to the pdo if possible for these. Attach the leaves to the top of the body, and then attach the heads to the body as well.

Download: A4 / Letter

JOLTEON CHIBI

35 / JOLTEON CHIBI - Pokémon Papercraft
Name: Jolteon
Type: Electric
Species: Lightning Pokémon
Height: 0.8 m (8′08″)
Weight: 24.5 kg (54.0 lbs.)
Interesting Facts: Jolteon's cells generate a low level of electricity. This power is amplified by the static electricity of its fur, enabling the Pokémon to drop thunderbolts. The bristling fur is made of electrically charged needles. Jolteon is the only Eevee evolution without a tail. Oddly, it can still learn Tail Whip and Iron Tail. It evolves from Eevee via Thunderstone.

THE PAPER MODEL
Height: 7.5 cm/3 in
Width: 6.2 cm /2.4 in
Depth: 6.1 cm/2.4 in
No. of Pages: 1
No. of Pieces: 20
Level: Medium
Designer: Lyrin
Photo: Lyrin
NOTES: Follow the numbers on the template while building. The only pieces that need to be folded are the neck white spikes. Start with the head and close it at the bottom. Build the legs and then go upwards, till you close the body at the "neck". Build the neck fur, then put it in its place and glue the head onto the body, then glue the ears. Glue the remaining yellow fur on the face and butt.

Download: A4 / Letter

CRESSELIA

488 / CRESSELIA - Pokémon Papercraft

Name: Cresselia
Type: Psychic
Species: Lunar Pokémon
Height: 1.5 m (4′11″)
Weight: 85.6 kg (188.7 lbs.)
Interesting Facts: Cresselia has a blue, swan-like body with a yellow underside, and two magenta tufts that form an arc across her chest. The yellow ornaments on the sides of her head give her head the appearance of a crescent moon. Cresselia also has glowing, pink, ring-like wings on her sides and back with paw like protrusions resting on Cresselia's chest.

THE PAPER MODEL
Height: 20.0 cm/ 7.9 in
Width: 35.7 cm/ 14.1 in
Depth: 24.0 cm/ 9.4 in
Pages: 5
Pieces: 41
Level: Medium-Hard
Designer: PODragon
Photo: Olber
NOTES: Build from head down, close at the tail. Attach the 'fins' by the tips, maybe with wire as a support.

Download: A4 / Letter

April Fool's Adventure Time Papercraft - Finn (and Jake)

Finn (and Jake) Adventure Time Papercraft
Name: Finn
Type: Human
Interesting Facts: April Fool's model for 2012! I wish you liked it. We might begin to become a bit too predictable, we'll have to find something else next year instead of changing the title :P We'll see...

THE PAPER MODEL
Height: 16 cm / x.x in
Width: 6.5 cm / x.x in
Depth: 6.1 cm / x.x in
Pages: 2
Pieces: 27
Level: It's alright
Designer: Paper Model Factory
Photo: PMF
NOTES: It was kinda quickly made, job kinda took toll on me lately. I was going to make Jake too but well, he's still there :P
All the parts are pretty much "glued-on" so you can pose him anyway you want. Fun one!

Download: Finn

UMBREON CHIBI

197 / UMBREON CHIBI - Pokémon Papercraft
Name: Umbreon
Type: Dark
Species: Moonlight Pokémon
Height: 1.0 m (3' 3")
Weight: 27.0 kg (59.5 lbs)
Interesting Facts: When agitated, this Pokémon protects itself by spraying poisonous sweat from its pores. Also, on the night of a full moon, or when it gets excited, the ring patterns on its body glow yellow. It evolves from Eevee by Happiness during the night or when around a Moon Shard.

THE PAPER MODEL
Height: 7.5 cm/3 in
Width: 5.9 cm/2.3 in
Depth: 7.3 cm/2.9 in
No. of Pages: 1
No. of Pieces: 13
Level: Easy
Designer: Lyrin
Photo: Lyrin
NOTES: Start with the head and close it at the bottom. Build the legs and then go upwards, till you close the body at the "neck". Glue the head onto the body, then glue the ears and tail. Follow the numbers on the template.

Download: A4 / Letter

PIDGEOTTO

017 / PIDGEOTTO - Pokémon Papercraft

Name: Pidgeotto
Type: Normal/Flying
Species: Bird Pokémon
Height: 1.1 m (3′07″)
Weight: 30.0 kg (66.1 lbs.)
Interesting Facts: Pidgeotto is a large raptor-like bird. While its primary color is brown, its plumage is much more elaborate than its pre-evolution, Pidgey. Its head-crest is much longer than Pidgey's and is a reddish color. The plumage of its tail is also quite colorful, alternating between red and yellow. Other than its ornamental plumage, its basic coloration is similar to Pidgey, with pinkish-gray feet and black markings around its eyes. Pidgeotto has powerful talons to grasp prey so these claws can inflict a lot of damage.

THE PAPER MODEL
Height: 22.7 cm/ 8.9 in
Width: 15.7 cm/ 6.2 in
Depth: 17.3 cm/ 6.8 in
Pages: 5 (+1 optional double sided)
Pieces: 49
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: Build from the head down, being careful with the hair and wing. Close at the 'ankle' where the feet and legs meet. Build the feet from the claws up. If you wish, print the optional included png on the back of the last page to give the hair an inner color.

Download: A4 / Letter

CRANIDOS

408 / CRANIDOS - Pokémon Papercraft

Name: Cranidos
Type: Rock
Species: Head Butt Pokémon
Height: 0.9 m (2′11″)
Weight: 31.5 kg (69.4 lbs.)
Interesting Facts: Cranidos is a gray, dinosaur-like Pokémon. It is physically based on the Pachycephalosaurus. The back half of Cranidos's body has a large, spiky pattern of blue and it has a short tail. Cranidos also has stubby arms with three claws, which, despite apparent stubbiness, are still viable for usage in attacking. Cranidos has a hooked beak, red irises, and a hard, dome-shaped head that is colored blue with four spikes on its back. Cranidos has feet with three claws forward and one backward.

THE PAPER MODEL
Height: 14.5 cm/ 5.7 in
Width: 8.6 cm/ 3.4 in
Depth: 11.1 cm/ 4.4 in
Pages: 3
Pieces: 56
Level: Easy-Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from the head down, attaching arms and legs as you go. Close at the tip of the tail.

Download: A4 / Letter

CASTFORM

351 / CASTFORM REGULAR - Pokémon Papercraft

Name: Castform Regular Forme
Type: Normal
Species: Weather Pokémon
Height: 0.3 m (1′00″)
Weight: 0.8 kg (1.8 lbs.)
Interesting Facts: Castform is an artificial Pokémon created by the Weather Institute in Hoenn. It was designed to help scientists predict the weather, and consequently changes its appearance (and type) when the weather changes.

THE PAPER MODEL
Height: 16.3 cm/ 6.4 in
Width: 10.1 cm/ 4.0 in
Depth: 10.0 cm/ 3.9 in
Pages: 3
Pieces: 19
Level: Easy-Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from curl (head) to bottom. Be careful with the knobby bits on the bottom, they can be kind of tricky.

Download: A4 / Letter

MUK

089 / MUK - Pokémon Papercraft

Name: Muk
Type: Poison
Species: Sludge Pokémon
Height: 1.2 m (3′11″)
Weight: 30.0 kg (66.1 lbs.)
Interesting Facts: The toxicity of Muk's form has reached the point where a single drop of it can make an entire lake stagnant and rancid. Its footprints are toxic enough for a person to contract influenza if they are touched. Their infamous stench increases in the summertime, due to the toxic substances in its body intensifying. Their ability to exist in the environment without it becoming completely hazardous to other lifeforms may be attributed to their ability to actively control their toxins, as they would likely never want to deliberately pollute a river or spread any harmful diseases.

THE PAPER MODEL
Height: 9.0 cm/ 3.5 in
Width: 19.2 cm/ 7.6 in
Depth: 14.5 cm/ 5.7 in
Pages: 4
Pieces: 24
Level: Easy
Designer: Brandon
Photo: Skeleman
NOTES: Build from the head down, being careful with the mouth. There are a couple of peaces that attach on the body after it is built (8, 20). Fold the bottom rings to give it more of a sludge-ish effect.

Download: A4 / Letter

EMPOLEON

395 / EMPOLEON - Pokémon Papercraft

Name: Empoleon
Type: Water/Steel
Species: Emperor Pokémon
Height: 1.7 m (5′07″)
Weight: 84.5 kg (186.3 lbs.)
Interesting Facts: Empoleon is a large penguin-like Pokémon. In terms of color, it has a closer resemblance to a "real-world" penguin than its pre-evolved forms have because it is mostly black or navy blue as opposed to being a light blue. Its feet actually appear to have webbing on them. Its wings are tipped with blue metal and have three golden claws sticking out at the bottom. It has a short, blue, metal "fin" sticking out of its back and another "fin" that's on the front of its body that extends to where its chin would be then splits to form a sort of collar. This "collar" is probably because real penguins are said to be wearing "tuxedos," due to their black and white appearance. If one looks at Empoleon, it has a tie like fin in the middle of its belly, and the collar coming off it, this relates to the "tuxedo" of a penguin.

THE PAPER MODEL
Height: 21.9 cm/ 8.6 in
Width: 16.7 cm/ 6.6 in
Depth: 17.1 cm/ 6.7 in
Pages: 4
Pieces: 40
Level: Easy-Medium
Designer: Brandon
Photo: Lyrin
NOTES: Follow the numbers, building the collar and arms as you go. Be careful with the claws and feet, they can be a bit tricky. Close at the bottom of the legs. Short instructions included.

Download: A4 / Letter

LUMINEON

457 / LUMINEON - Pokémon Papercraft

Name: Lumineon
Type: Water
Species: Neon Pokémon
Height: 1.2 m (3′11″)
Weight: 24.0 kg (52.9 lbs.)
Interesting Facts: Lumineon's main body has a rounder appearance than that of its pre-evolution, Finneon. Instead of having a pair of tail fins resembling butterfly wings, Lumineon has pectoral fins that resemble butterfly wings, with a wavy patterning of dark blue on them. Lumineon has teardrop-shaped pelvic fins that can allow it to crawl along the sea floor.

THE PAPER MODEL
Height: 17.9 cm/ 7.0 in
Width: 22.2 cm/ 8.7 in
Depth: 20.8 cm/ 8.2 in
Pages: 4
Pieces: 36
Level: Medium
Designer: POdragon
Photo: POdragon
NOTES: Build from nose to tail, attaching (double sided) fins as you go. Close at tip of the tail.

Download: A4 / Letter

PURRLOIN

509 / PURRLOIN - Pokémon Papercraft

Name: Purrloin
Type: Dark
Species: Devious Pokémon
Height: 0.4 m (1′04″)
Weight: 10.1 kg (22.3 lbs.)
Interesting Facts: Purrloin is a primarily purple-colored, feline Pokémon. Its head is large proportional to its body, and tufted at its ears and cheeks. Long, tapered violet markings above its green, feline eyes extend towards its ears. Tapered whitish markings above its eyes resemble eyebrows, and its muzzle, sporting a diminutive nose, is of similar coloration. Its neck, shoulders, back and hind paws are also whitish-colored. The lower portion of its forelimbs are purple, and the tip of its tail sports a curved, vaguely scythe-like extension.

THE PAPER MODEL
Height: 17.5 cm/ 6.9 in
Width: 10.7 cm/ 4.2 in
Depth: 7.5 cm/ 3.0 in
Pages: 2
Pieces: 40
Level: Medium
Designer: Brandon
Photo: Olber
NOTES: Build the ears first and arms separately. Then attach the ears building the head downward. Attach the tail when possible. Close the model at one of the legs.

Download: A4 / Letter

MIME JR

439 / MIME JR - Pokémon Papercraft

Name: Mime Jr.
Type: Psychic/Fairy
Species: Mime Pokémon
Height: 0.6 m (2′00″)
Weight: 13.0 kg (28.7 lbs.)
Interesting Facts: Mime Jr. is a small pink Pokémon with a black torso. Mime Jr. has a red bump on its stomach and a typical red clown nose on its face. Mime Jr. appears to be wearing a black, crooked hat with a white ball on it.

THE PAPER MODEL
Height: 17.5 cm/ 6.9 in
Width: 14.3 cm/ 5.6 in
Depth: 8.8 cm/ 3.5 in
Pages: 3
Pieces: 36
Level: Medium
Designer: Olber and Brandon
Photo: Olber
NOTES: Build from the head down, attaching the arms and bulbous skirt as you go. Close at the bottom, and attach the legs.

Download: A4 / Letter

ALOMOMOLA

594 / ALOMOMOLA - Pokémon Papercraft

Name: Alomomola
Type: Water
Species: Caring Pokémon
Height: 1.2 m (3′11″)
Weight: 31.6 kg (69.7 lbs.)
Interesting Facts: Alomomola is a pink fish Pokémon with darker pink markings on its body and fins. Its main body is heart-shaped. It has large, hand-like dorsal and ventral fins, each divided into four sections and tipped with a paler pink. It seems to lack a proper tail fin. Its eyes are round with a mark that appears to be an eyelash extending up and back toward the rest of the body.

THE PAPER MODEL
Height: 17.5 cm/ 6.9 in
Width: 3.4 cm/ 1.3 in
Depth: 12.9 cm/ 5.1 in
Pages: 2 (+1 for base)
Pieces: 24 (+5 for base)
Level: Easy-Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from nose to tail. Base requires weight in order to stand, if you choose to use it. More notes included in pack.

Download: A4 / Letter