SYLVEON - " MERRY XMAS :) "

700 / SYLVEON- Pokémon Papercraft

Name: Sylveon
Type: Fairy
Species: Intertwining Pokémon
Height: 1.0 m (3'03")
Weight: 23.5 kg (51.8 lbs.)
Interesting Facts: Sylveon is a quadruped, mammalian Pokémon covered primarily in pale cream-colored fur with pinkish feet, ears, and tail. There are two bows on its body, one on its left ear and one around its neck, from which two feelers adorn it. The bows are pale cream with pinkish centers, while the feelers are pale cream with pinkish and blue tips. It sends a soothing aura from these feelers to calm fights, and will also use them to "hold hands" with its Trainer. It has short, slender legs and small paws with three visible toes on each foot. Its eyes are blue with white pupils and no visible sclera. When its mouth is open, two pointed teeth can be seen on its upper jaw. Its furry pinkish tail is slightly curved in a crescent shape.

THE PAPER MODEL
Height: 20.0 cm / 7.87 in
Width: 36.1 cm / 142.13 in
Depth: 19.0 cm / 7.48 in
Pages: 5
Pieces: 67
Level: Easy
Designer: Olber
Photo: Olber
NOTES: This model is simple and easy to build. Start with the ears, head, body, etc. Close the model at the flapless part. Textures included. The bows can be shaped as wished. Have fun.

Download: A4 / Letter

BONSLY - MERRY CHRISTMAS!

438 / BONSLY - Pokémon Papercraft
Name: Bonsly
Type: Rock
Species: Bonsai Pokémon
Height: 0.5 m (1′08″)
Weight: 15 kg (33.1 lbs.)
Interesting Facts: Bonsly is a round, brown Pokémon, with the top of its head resembling a club. It has a rim around its body and three yellow spots on its face, two of which are the eyes. It also has small legs and toothless feet. Bonsly has a hole on its rear, similar to the ones on flowerpots. It is a good mimic, which causes it to get mistaken often with a real bonsai tree. It can stay on the same spot for a long time. It has the habit of crying, not because of sadness, but for the excess of moisture in its body. It prefers dry areas, but can also be found in gardens.

THE PAPER MODEL
Height: 16.0 cm / 6.2 in
Width: 7.2 cm / 2.8 in
Depth: 10.6 cm / 4.1 in
Pages: 3
Pieces: 25
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start building at the top of the body, closing the segments and gluing them as soon as they are built. Use a pen to round the pieces, giving them a more round shape. The balls are next, glue them to the body BEFORE gluing the feet. Make sure to reinforce the connection between 22/24 and 23/25. Mine stands, but if you feel it might fall, put some weight inside the feet before closing.

Download: A4 / Letter

AMOONGUSS

591 / AMOONGUSS - Pokémon Papercraft
Name: Amoonguss
Type: Grass/Poison
Species: Mushroom Pokémon
Height: 0.6 m (2′00″)
Weight: 10.5 kg (23.1 lbs.)
Interesting Facts: Amoonguss is a mushroom-like Pokemon with a Poke ball desing on it's arms and cap (in which there are warts) that it uses to lure preys. It's a carnivore Pokemon that lives in long grass, where only the mushroom caps can be seen. A shiny Amoonguss has the color partern resembling a Master ball.

THE PAPER MODEL
Height: 14.3 cm / 5.6 in
Width: 15.5 cm / 6.1 in
Depth: 13.1 cm / 5.1 in
Pages: 4
Pieces: 25
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Pretty straight forward model, start with the bottom of the body, closing at the top. I suggest leaving a couple tabs unglued, just til you can see if it will stand properly with the top, in case it doesn't, put a coin inside. Glue the mouth before closing the body and the hands as soon as it's closed. Start the cap with piece 16 and build around it, closing at the place it will connect with the body. Use a pencil to round the pieces and give it a more round shape.

Download: A4 / Letter

MEGA GENGAR - HAPPY HALLOWEEN!

094 / Mega Gengar - Pokémon Papercraft
Name: Mega Gengar
Type: Ghost/Poison
Species: Shadow Pokémon
Height: 1.4 m (4′07″)
Weight: 40.5 kg (89.3 lbs.)
Interesting Facts: When Gengar mega evolves a part of its body sinks into the body. It gets a reddish purple color on the lower portions and a third eye appears on the forehead, which is yellow and allows it to see into other dimensions. The spikes on the back get more numerous and pointy, they also appear on the hands and tail. Mega Gengar has the highest base Special Attack stat of any Poison and Ghost Pokémon. It also has the highest base Speed stat of all Ghost Pokémon and the highest base stat total of all non-legendary Ghost Pokémon.

THE PAPER MODEL
Height: 15.0 cm / 5.9 in
Width: 22.7 cm / 8.9 in
Depth: 19.7 cm / 7.7 in
Pages: 6
Pieces: 86
Level: Medium-Hard
Designer: LuIS
Photo: LuIS
NOTES: Start the model at the spikes at the top of the forehead. Make sure to add the detail at the forehead and the spikes when the numbers get to them. The spikes are repetitive, but easy to build. I also added some reference pictures on the download pack to help glue them on the right place. Close the model at the bottom of the body. The hands are the hard part of the model, take your time with them, follow the numbers and the instructions and you'll be fine. Start them at the middle and build the spikes around it, there are some colored tabs and suggested fold lines on the .pdo to help. Close them at the bottom and glue to the arms. Further instructions added on the template.

Download: A4 / Letter

FAQ USAGE

It's that time of the year again! PLEASE READ THE FAQ IF YOU ARE HAVING ISSUES. 

Many of the issues mentioned in comments are addressed by the FAQ, even more so now that it has been recently updated.

Issues with several old download packs showing as corrupted is definitely on our end, and we are working on fixing it.

Other issues, such as download packs opening in browser, or files simply opening in the wrong program, or trying to use mobile devices to access files is addressed in the FAQ.

FIND FAQ HERE 

====>>>FAQ<<<===

MEGA CHARIZARD X

006 / M-CHARIZARD X - Pokémon Papercraft
Name: Mega Charizard X
Type: Fire/Dragon
Species: Flame Pokémon
Height: 1.7 m (5'07")
Weight: 110.5 kg (243.6 lbs.)
Interesting Facts: As Mega Charizard X, its body and legs appear more physically fit, though its arms remain thin. Its skin turns black with a sky blue underside extending from the lower jaw to the tip of the tail. Two spikes with blue tips curve upward from the front and back of each shoulder, while the tips of its horns sharpen, turn blue, and curve slightly upward. Its brow and claws are larger, its snout is shorter, and its eyes are now red with white pupils. It has two small, fin-like spikes under each horn and two more down its lower neck. The lower trims of its wings are divided into large, rounded points and each third joint is adorned with a claw-like spike. Mega Charizard X breathes blue flames out the sides of its mouth, and the flame on its tail now burns blue with increased heat.

THE PAPER MODEL
Height: 22.0 cm/7.8 in
Width: 33.1 cm/ 6.2 in
Depth: 28.2 cm/4.4 in
No. of Pages: 9
No. of Pieces: 102
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: Instructions included in the files, along with a couple additional images for a short example.

Download: A4 / Letter

ESPURR

677 / ESPURR - Pokémon Papercraft
Name: Espurr
Type: Psychic
Species: Restraint Pokémon
Height: 0.3 m (1′00″)
Weight: 3.5 kg (7.7 lbs.)
Interesting Facts: Epurr is a bipedal, feline Pokemon with mussed pale gray fur, except for some details at the tip of the ears and legs, which are cream colored. It has large annular eyes with lilac color and dark purple pupils. The ears are quire large in proportion to the body and folded beneath them are two ring-shaped buff-colored organs, which emit intense psychic powers and its said that if not for the folded ears, these powers would leak. Espurrs are solitary in the wild, acting on their own and valuing their independence.

THE PAPER MODEL
Height: 15.0 cm / 5.9 in
Width: 12.5 cm / 4.9 in
Depth: 8.4 cm / 3.3 in
Pages: 3
Pieces: 63
Level: Medium
Designer: LuIS
Photo: LuIS
NOTES: Start at the top of the head, building the ears and following the numbers around them. Glue the separated fur at the top of the head as soon as the numbers get to them. Proceed to the body, making sure to glue pieces 33 to 45 as a set to the head. Build the rest following the numbers. Close at the tip of the leg.

Download: A4 / Letter

BISHARP

625 / BISHARP - Pokémon Papercraft
Name: Bisharp
Type: Dark/Steel
Species: Sword Blade Pokémon
Height: 1.6 m (5′03″)
Weight: 70 kg (154.3 lbs.)
Interesting Facts: Bisharp is a bipedal Pokemon with a round helmet, similar to a war helmet topped with an axe blade. Even though the helmet hides most of its face, the triangular eyes can still be seen. It has metallic hands, with retractable blades. Encircling the torso are two blades. Both of the feet are metalic and are split down the middle, resembling hooves or steel war boots or leggings. In the wild, they rule over a pack of Pawniard and fight other Bisharp to become the alpha of the pack, in which the loser is cast out. When hunting, the Pawniard allow the leader Bisharp to perform the finnishing blow.

THE PAPER MODEL
Height: 17.6 cm / 6.9 in
Width: 14.7 cm / 5.8 in
Depth: 7.5 cm / 3 in
Pages: 4
Pieces: 66
Level: Medium/Hard
Designer: LuIS
Photo: LuIS
NOTES: The model is composed of several parts. Start the model at the helmet, build the entire outside of it, than glue the inside part and close using the tabs on the inside piece. The next part is the face, build it starting from the eyes and take care when it gets to the mouth. Glue the head blade to the helmet BEFORE gluing the face to the helmet. You can either build the 3D or 2D blade. The body is simple, build the parts separated and glue the blades between the upper torso, middle body and the legs. The blades are different, each one is a match to the part of the body it's meant to be. I suggest gluing the top one and waiting some time before gluing the lower one. Further instructions on how to build the blades are included on the pdo. Build the legs from the bottom up, closing at the bottom. Join both legs starting at the front, one tab of each side at a time. Start the feet at the toes and build them up, you'll need some weight inside them, I used corn. Place the feet on a flat surface and glue the body to them.

Download: A4 / Letter

MOTHIM

414 / MOTHIM - Pokémon Papercraft
Name: Mothim
Type: Bug/Flying
Species: Moth Pokémon
Height: 0.9 m (2′11″)
Weight: 23.3 kg (51.4 lbs.)
Interesting Facts: Mothim is a moth like Pokemon with two sets of wings, with oval markings on them. It has antennaes running along the edges before extending and widening above its head. The body is black with a stripe on it. It also has a gray stripe down on the back. It has legs and a black split tail. It is a nomadic, nocturnal that searchs for honey and nectar, but instead of gathering honey on its own, it hives of Combees. It's a male only species, the female counterpart beeing Wormadam.

THE PAPER MODEL
Height: 15 cm / 5.9 in
Width: 33.1 cm / 13 in
Depth: 8.1 cm / 3.2 in
Pages: 3
Pieces: 41
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Start the model at the top at the head and follow the numbers down. Glue the antennae as the numbers get to them. Close the body at the bottom and glue the detail bellow it after. Proceed to the legs and glue the arms, you can follow the pdo or glue them on a different way. The last thing you'll do is glue the wings, Glue the big ones on the inside and the smaller ones lastly a bit behind the big ones (refer to the pdo).

Download: A4 / Letter

MASQUERAIN

284 / MASQUERAIN - Pokémon Papercraft
Name: Masquerain
Type: Bug/Flying
Species: Eyeball Pokémon
Height: 0.8 m (2′07″)
Weight: 3.6 kg (7.9 lbs.)
Interesting Facts: Masquerain is a light-blue Pokemon with wings that allow it to fly in any direction, but not if wet. The head has a teardrop shape with black eyes and white pupils. It has a pair of angry antennaes, which resemble a pair of angry eyes, which are used to intimidate its enemies. When under rainy weather, the antennaes become heave and the eye patterns seem droopy. It will shelter itself under trees to protect the wings and antennaes.

THE PAPER MODEL
Height: 19,9 cm / 7.8 in
Width: 30.7 cm / 12.1 in
Depth: 10.4 cm / 4.1 in
Pages: 4
Pieces: 28 (2D wings)/30 (3D wings)
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: The model is made out of two balls, build them both separated and glue them before gluing the wings. Glue the smaller wings before the big ones. There are 3D wings (not pictured) and 2D ones as well, choose which ones you'll build and print only the pages for them: the 3D ones are on pages 6 and 7 and the 2D ones on pages 4 and 5.

Download: A4 / Letter

INFERNAPE

392 / INFERNAPE - Pokémon Papercraft
Name: Infernape
Type: Fire/Fighting
Species: Flame Pokémon
Height: 1.2 m (3'11″)
Weight: 55 kg (121.3 lbs.)
Interesting Facts: Infernape is a bipedal, primate-like Pokémon with white and brown fur. It also has some gold markings on it's body, all with circular swirls. On the top of it's head there's a flame, that's never extinguished. There are four digits on both the hands and feet and it has a long tail. Infernape practices a unique kind of martial art, which involve all of its limbs. This style also uses fiery punches and kicks. It is the shortest fully evolved starter Pokémon.

THE PAPER MODEL
Height:  19.0 cm / 7.4 in
Width: 16.1 cm / 6.3 in
Depth: 14.2 cm / 5.5 in
Pages: 4
Pieces: 69
Level: Medium-Hard
Designer: Brandon
Photo: LuIS
NOTES: Start the model by the head, following the numbers and the instructions. Add the details following the numbers and instructions. Be carefull with piece 69, you'll need to cut a hole on it so the tail can pass, also, only add this piece after the legs and the torso are joined and the model is standing. Start the legs by the toes and work up. The model can't stand, further instructions on how to make it stand and some other parts of the model are on the template.

Download: A4 / Letter

MEGA BEEDRILL

015 / BEEDRILL - Pokémon Papercraft
Name: Mega Beedrill
Type: Bug / Poison
Species: Poison Bee Pokémon
Height: 1.0 m (3'03")
Weight: 29.5 kg (65.0 lbs.)
Interesting Facts: As Mega Beedrill, its gains more defined features. The horns becomes more curved and sharp like two different triangle fused together each, and its eyes become longer and sleeker. Its upper wings split in two with black trim along the top, and the bottom wings become smaller. Its drills become longer and larger, resembling javelins. Its legs are no longer insectoid, and instead resemble its arms in shape. Its abdomen becomes larger and grooved, and is attached to its thorax by a black structure. Its main stinger is now a pale yellow, and black stripes appear on on its abdomen, chest, and leg stingers. The poison that Mega Beedrill produces from its four limbs all work instantaneously, yet the poison it emits from its tail is slow-acting. It uses the former to prevent its foes from fleeing, and the latter to deal the finishing blow.

THE PAPER MODEL
Height: 27.1 cm / 10.66 in
Width: 22.2 cm / 8.74 in
Depth: 21.5 cm / 8.46 in
Pages: 8
Pieces: 54
Level: Hard
Designer: Olber
Photo: Olber
NOTES: Please, refer to the pdo file for the building. This model is pretty hard on the spears. Be carefull when you're gluing them. Follow the pdo instructions. Limbs must be sticked to the main body before attaching the spears. A base is included. Be patient.

Download: A4 / Letter

NIDORINA

030 / NIDORINA- Pokémon Papercraft
Name: Nidorina
Type: Poison
Species: Poison Pin Pokémon
Height: 0.8 m (2′07″)
Weight: 20.0 kg (44.1 lbs.)
Interesting Facts: Nidorina is a female only Pokemon with a light-blue color and dark blue patches. On it's back it has spikes, which can be retracted when with a group and while resting in its burrow. It's a gentle Pokemon and a caring mother, even chewing food for it's young and becomes nervous when separated from it's kind. It prefers not to fight, but when it does, prefer biting and chewing, but it can also emit ultrasonic cries.

THE PAPER MODEL
Height: 15.0 cm / 5.9 in
Width: 17.3 cm / 6.8 in
Depth: 15.2 cm / 5.9 in
Pages: 5
Pieces: 47
Level: Medium
Designer: POdragon
Photo: Toshi
NOTES: Start at the head and build it by numbers. Glue the teeth tabs inside the mouth so they'll be hidden. Be careful with the claws, there are some colored tabs for reference there. Start the legs at the bottom and glue the legs claws as soon as the numbers get to them. Glue the spikes before closing so you can apply presure from the inside. Close at the tail.

Download: A4 / Letter

MEGA SABLEYE

302 / MEGA SABLEYE - Pokémon Papercraft

Name: Sableye (Mega)
Type: Dark/Ghost
Species: Darkness Pokémon
Height: 0.5 m (1'08")
Weight: 11.0 kg (24.3 lbs.)
Interesting Facts: As Mega Sableye, all the energy from its Mega Evolution is concentrated into the red jewel on its chest, causing it to detach from Sableye's body and significantly increase in size; the detached jewel leaves a small hole in Mega Sableye's chest. Its ears elongate, and it gains a spike on the top of its head. Its teeth turn from white to yellow, and its eyes also change from pale blue to a crimson red, with diagonal slits at their inner edges. The enlarged jewel is said to boast such incredible hardness that no attack can even leave a scratch on it. During battle, Mega Sableye shelters itself behind the jewel, from where it can take advantage of any openings its target leaves exposed.

THE PAPER MODEL
Height: 19.0 cm / 7.48 in
Width: 17.6 cm / 6.93 in
Depth: 15.4 cm / x.x in
Pages: 5
Pieces: 58
Level: Medium
Designer: Olber
Photo: Olber
NOTES: This model is pretty simple to build. Just refer to pdo file to get more orientation. Start at the main spike on its head, then the ears. Build the head top making your way down; attach the ears in the progress. Fold the jewel pieces in order to get well shaped jewels. Glue them before you attach the legs. By the way, you got to attach the legs before closing the model at the "close here" piece. To get the giant jewel sticked to Sableye, use a drop of glue in the rigth arm first finger. Laying the model face up may be useful, in order you let the glue dry. When it's full dried, make it stand and place it correctly.

Download: A4 / Letter

AERODACTYL

142 / AERODACTYL- Pokémon Papercraft
Name: Aerodactyl
Type: Rock/Flying
Species: Fossil Pokémon
Height: 1.8 m (5′11″)
Weight: 59.0 kg (130.1 lbs.)
Interesting Facts: Aerodactyl is a reptilian Pokémon with membranous wings with clawed hands, which allow it to hold objects. It also has a strong arrow-tipped tail tail. It's feet can scoop up clutch its prey in flight. The serated fangs are said to be able to rip the enemies throats. It nets at mountains. Even tho it can be revitalized with the Fossil, it's considered to be extinct in the wild.

THE PAPER MODEL
Height: 14.5 cm/ 5.7 in
Width: 22.6 cm/ 8.9 in
Depth: 44.3 cm/ 17.4 in
Pages: 5
Pieces: 64
Level: Medium
Designer: PODragon
Photo: LuIS
NOTES: Start the model at the mouth and build the head around it. It's important to note that you'll want to glue the teeth BEFORE finishing the head. Also, paint the inside of the tabs of the teeth so they match the inside of the mouth. Now proceed to the body. Start the wings at the tips and build them down. Be careful with the claws, they can offer some trouble. Next is joining the wings to the body. Make sure here to reinforce where both connect, otherwise they'll fall, just glue some layers of scrap paper on the inside where they join. Next part is the legs, build them from the toes up, joining them to the body as soon as the numbers get to them. It's suggest that you insert a roll of scrap paper inside pieces 33 and 38 that goes to the bottom of the feet, in order to endure the weight. Close the model at the tip of the tail. There are some colors on the tabs to help fold and know where each part goes. 

Download: A4 / Letter

VANILLUXE

584 / VANILLUXE - Pokémon Papercraft
Name: Vanilluxe
Type: Ice
Species: Snowstorm Pokémon
Height: 1.3 m (4'03")
Weight: 57.5 kg (126.8 lbs.)
Interesting Facts: Vanilluxe is a two-headed Pokémon covered in a swirled, white substance that resembles ice cream. Each head has two light purple eyes and a slightly darker purple mouth. There are light blue ice crystals to the side of each eyes and two under each mouth. It has two stubby arms and three spikes under its body, all of which resemble icicles. The middle spike under its body is the largest, and there is a hollow, straw-like structure on top of the left head. On the back of its two heads there are many small ice crystals. Vanilluxe ingests large quantities of water, which it uses to create internal snow clouds. When angered, it expels a powerful blizzard.

THE PAPER MODEL
Height: 21.0 cm / 8.27 in
Width: 18.0 cm / 7.08 in
Depth: 10.0 cm / 3.94 in
Pages: 6
Pieces: 51
Level: Medium
Designer: Olber
Photo: Olber
NOTES: As it's previous evolutions, make your way down from the top to the button, glueging the chips in the way. A base is included needing a weight inside.

Download: A4 / Letter

VANILLISH

583 / VANILLISH - Pokémon Papercraft
Name: Vanillish
Type: Ice
Species: Icy Snow Pokémon
Height: 1.1 m (3'07")
Weight: 41.0 kg (90.4 lbs.)
Interesting Facts: Vanillish have large, white, rounded upper bodies with a swirled substance on top, making it resemble a scoop of vanilla ice cream. Its eyes are dark blue with small, ice crystals at the sides. Vanillish has a dark blue mouth, two ice crystals below its mouth, and stubby, limbs that resemble icicles. It has a pointed lower body that resembles a large icicle. Vanillish lives in southern, snowy mountains, which it migrated to during an ancient ice age. It creates ice inside its body by drinking water, and expels it to hide itself or freeze opponents.

THE PAPER MODEL
Height: 18.7 cm / 7.36 in
Width: 0.99 cm / 0.39 in
Depth: 10.2 cm / 4.01 in
Pages: 3
Pieces: 26
Level: Easy
Designer: Olber
Photo: Olber
NOTES: Easy to build. Follow the numbers. Glue the chips in your way down. Base included

Download: A4 / Letter

VANILLITE

582 / VANILLITE - Pokémon Papercraft
Name: Vanillite
Type: Ice
Species: Fresh Snow Pokémon
Height: 0.4 m (1′04″)
Weight: 5.5 kg (12.6 lbs.)
Interesting Facts: Vanillite heads are covered with something resembling a swirled scoop of vanilla ice cream. Beneath this lies its actual head, which is made of the same icy material as its body. It has dark blue eyes, a dark-blue mouth, and light blue crystals on its cheeks. Its small body is adorned with specks of ice and has stubby arms. The snow on a Vanillite's head can melt with heat or repeated touching, leaving it with a "bald" appearance of simply an ice creature. In the Japanese Pokédex 4-coma, it becomes embarrassed if seen in this state. Vanillite can blow winds as low as -58 degrees Farenheit, which causes it to create ice crystals and make it snow in nearby areas when it exhales. It sleeps under snow and gains energy from the morning sun.

THE PAPER MODEL
Height: 12.1 cm / 4.8 in
Width: 0.75 cm / 0.3 in
Depth: 0.75 cm / 0.3 in
Pages: 2
Pieces: 15
Level: Easy
Designer: Olber
Photo: Olber
NOTES: This is a really easy model. It can be done in an hour or two. Just follow the numbers and have fun.

Download: A4 / Letter

AIPOM

190 / AIPOM - Pokémon Papercraft
Name: Aipom
Type: Normal
Species: Long Tail Pokémon
Height: 0.8 m (2′07″)
Weight: 11.5 kg (25.4 lbs.)
Interesting Facts: Aipom is an monkey-like Pokemon with a hand with 3 fingers at the tip of it's tail. The fur is mainly purple, but some beige parts can be noted, such as the face and belly. The tail is strong enough to anchor it to branches and suspend the rest of the body, but at the same time it's delicated enough to eat fruits and manipulate objects. Aipom lives high in the treetops, using its tail for balance as it swings from branch to branch. 

THE PAPER MODEL
Height: 18.1 cm / 7.1 in
Width: 12.8 cm / 5 in
Depth: 16.2 cm / 6.3 in
Pages: 4
Pieces: 39
Level: Medium/Easy
Designer: Brandon
Photo: LuIS
NOTES: Start the model at the fur on the top of the head and close the head at the bottom. It's important to note that all the lines piece 1 should be at least smootly folded, in order to get the right shape. Start the body at the legs and add details, such as tail and arms as you go. The tabs on the legs are a bit weird, but they're like that to give them more strenght. Close the body at the top and glue the head to it after. The feet are the last part you'll glue, make sure they are leveled with the tail, so the model will stand without weight.

Download: A4 / Letter

LARVITAR V2

246 / LARVITAR - Pokémon Papercraft
Name: Larvitar
Type: Rock/Ground
Species: Rock Skin Pokémon
Height: 0.6 m (2' 0")
Weight: 72.0 kg (158.7 lbs)
Interesting Facts: Larvitar is born deep under the ground. To come up to the surface, this Pokémon must eat its way through the soil above. Until it does so, Larvitar cannot see its parent's face. It evolves into Pupitar starting at level 30, whom evolves into Tyranitar starting at level 55.

THE PAPER MODEL
Height: 14 cm / 5.5 in
Width: 11.6 cm / 4.5 in
Depth: 8 cm / 3.1 in
Pages: 2
Pieces: 22
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Not a hard model, start at the horn and build it down. Be careful with the tail, it's the hardest part. Close at the feet. Further instructions added on the template. It might need some weight to stand.

Download: A4 / Letter

VENIPEDE

543 / VENIPEDE - Pokémon Papercraft
Name: Venipede
Type: Bug/Poison
Species: Centipede Pokémon
Height: 0.4 m (1′04″)
Weight: 11.7 kg (5.3 lbs.)
Interesting Facts: Venipede is an insectoid Pokémon. The body is mainly magenta, with some black portions and a green segmented abdomen. Two short feelers banded with black extend from its hindquarters, which it uses in addition to its antennae to explore its surroundings and detect prey by sensing air vibrations. It's an agressive Pokemon and it's bite injects a strong poison.

THE PAPER MODEL
Height: 9 cm / 3.5 in
Width: 16.5 cm / 6.5 in
Depth: 9.7 cm / 3.8 in
Pages: 3
Pieces: 38
Level: Easy
Designer: Brandon
Photo: Carnilmo
NOTES: Follow the numbers on the template. Attach the feet before you glue the tail (piece 27). Glue the eyes, antannae and shell with superglue to complete the model. Have fun!

Download: A4 / Letter

HOOPA CONFINED FORM

720 / HOOPA - Pokémon Papercraft
Name: Hoopa (Confined Form)
Type: Psychic/Ghost
Species: Mischief Pokémon
Height: 0.5 m (1′08″)
Weight: 9 kg (19.8 lbs.)
Interesting Facts: Hoopa Confined is a light purple Pokémon with several pink markings. There is a v-shaped marking on its chest and bands around its wrists. Additionally, there are pink markings around its head and a growth on top resembling hair tied into a ponytail. There is a yellow, ring marking in the center of its forehead, and it has green eyes with yellow sclera. On either side of its head is a dark gray horn that curves slightly upward. Hoopa has three gold rings: one large one around its lower body and one hanging freely on each of its horns. Its arms are not attached to its body and float next to it. Each arm has a small golden spike on one end and a hand similar to a mitten on the other. There is a golden spike on each shoulder, which is similar to those on its arms. Hoopa's lower body consists only of a wispy structure similar to its ponytail.

THE PAPER MODEL
Height: 19.2 cm / 7.7 in
Width: 19.8 cm / 7.7 in
Depth: 19.6 cm / 7.6 in
Pages: 8
Pieces: 59
Level: Medium
Designer: Olber
Photo: Olber
NOTES: This model is easy to build. The rings are a little tricky so you got to be patient.Start from the head, or from the horns. But build them seperately. Once you have the horns done, then attach them to the head. You can glue the arms to the body or not, it's up to you. Also, Hoppa doesn't stand by itself, and the pack doesn't include a base. You can build an extra ring and glue it to the bottom of the model in order it can stand, as you can see in the picture. Good Luck ;)

Download: A4 / Letter

BUNNELBY

659 / BUNNELBY - Pokémon Papercraft
Name: Bunnelby
Type: Normal
Species: Digging Pokémon
Height: 0.4 m (1′04″)
Weight: 5.0 kg (11.0 lbs.)
Interesting Facts: Bunnelby is a small, gray, rabbit-like Pokémon, with large ears with a pinkish fur on the inside. The collar around it's neck is made of brown fur. It's ears are strong enough to shovel dirt and chop tree roots. It tends to be nocturnal.

THE PAPER MODEL
Height: 21.0 cm / 8.2 in
Width: 12.4 cm / 4.8 in
Depth: 8.0 cm / 3.14 in
Pages: 3
Pieces: 46
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Not a hard model, but some parts can offer some trouble. I indicated the lines that must be fold in red, they're mainly on the ears, and it can be quite hard to build without folding. Start the model at the top of the ears and build down, closing the head at the bottom. Glue the nose before closing the body and the teeth after. You might have to force a bit the cheek are in order for the teeth to glue correctly. Glue the head to the collar as soon as it's ready. Build the body from the legs up, closing at the top.

Download: A4 / Letter

TARDIS

???/ Tardis- Doctor Who Papercraft
Name: Time And Relative Dimensions In Space
Type: Very Cool Spaceship
Species: Bigger on the inside Spaceship
Height: No way to tell! Did I mention it's smaller on the outside?
Weight: Who can say? This thing is HUGE!
Interesting Facts: "Something OLD, something NEW, something BORROWED, something BLUE!". The coolest spaceship there is. It can travel in time and space (shame it can't freely travel dimensions, poor Rose Tyler...), it's so big it once had a library WITH A POOL! It has a chameleon circuit, which allows it to disguise itself depending on the environment. The Doctor's TARDIS has a defective one, but as it's been pointed many times, can be fixed. It seems to both change with the Doctor when he regenerates and can also be changed at the Doctor's will. Despite the sign on the door saying to pull to open, the Doctor pushes.
You know that sound it makes, the wheezing, groaning? The sound that brings hope to everyone that hears it (even the Doctor himself)?  It's not supposed to make that noise, it happens because the Doctor leaves the breaks on. During an episode, the TARDIS was forced into the body of a woman, where it said "Hello" to the Doctor, and after all these years of travel, said it was nice to meet him.

THE PAPER MODEL
Height: 18.0 cm / 7.0 in
Width: 9.0 cm / 3.5 in
Depth: 9.1 cm / 3.5 in
Pages: 4
Pieces: 15
Level: Easy
Designer: LuIS
Photo: LuIS
NOTES: Pretty simple model. Build every part separated and glue them together once they are together. More instructions are included on the template. The door hangs aren't on the 3D, I've cut two small stripes of paper and glued them to the indicated places.

Download: A4 / Letter

DALEK

???/ Dalek - Doctor Who Papercraft
Name: Dalek
Type: Cyborg
Species: Exterminate Machine
Height: More than enough to EXTERMINATE universes!
Weight: Wouldn't be wise to ask ;)
Interesting Facts: The Daleks are a race of genetically engineered mutants. They name the Doctor (WHO?!) as their greatest enemy. Their plans can be summarized on a single word: "EXTERMINATE", which pretty much sums the Daleks themselves. For example, on this instance, they've exterminated Paperpokes!

THE PAPER MODEL
Height: 13.2 cm / 5.1 in
Width: 7.3 cm / 2.8 in
Depth: 11.3 cm / 4.4 in
Pages: 3
Pieces: 99
Level: Medium-Hard
Designer: LuIS
Photo: LuIS
NOTES: Not a simple model. Some small details, such as the arms and eye, and a very repetitive one with the 48 balls on the main part of the body. You'll start at these balls, glue them to the body right after it's cut, not even fold it. Proceed to the base (it has some details at the bottom, glue them before closing the base at the top) and build the model up. Before gluing the main part (49) to the base, glue the part on it's back. The part above the main one is simple, just remember to glue piece 65 to it before closing. The "neck" is next, followed by the top of the head, where you'll glue all the details BEFORE closing. Join the so called neck and the top of the head together and glue them to the body. Cut a hole inside piece 76 to pass the tube, and only after glue the eye, only after glue it to the place where it connects to the head. The "arms" are the hardest part, specially the left one. Take your time to cut it, and be patient, these stripes can be annoying. I included the textures for a couple more colors, but the pdf is only for the red one. In order to change the color you'll have to use the pdo, I also included a lineless one.

Download: A4 / Letter

MEGA GARDEVOIR

282 / M-Gardevoir - Pokémon Papercraft
Name: Mega Gardevoir
Type: Psychic/Fairy
Species: Embrace Pokémon
Height: 1.6 m (5′03″)
Weight: 48.4 kg (106.7 lbs.)
Interesting Facts: As Mega Gardevoir, it turns almost completely white; only its hair remains green. Its gown becomes longer and wider, resembling a bridal gown. The forearms are slightly thicker with a pointed extension above the elbow. Its facial spikes are larger and now curl upwards. In contrast, its hair is now shorter and more tightly curled. There are now two horns in the center of its chest, extending to either side. These horns are said to be a physical manifestation of this Pokémon's heart, and it is able to use tremendous psychic power now that it is open.

THE PAPER MODEL
Height: 22.9 cm / 8.9 in
Width: 38.9 cm / 15.2 in
Depth: 20.3 cm / 7.9 in
Pages: 9
Pieces: 61
Level: Medium-Hard
Designer: Olber
Photo: Olber
NOTES: Begin from the one-pieced hair. Make your way down. Inner skirt is optional.

Download: A4 / Letter

SLOWBRO

080 / SLOWBRO - Pokémon Papercraft
Name: Slowbro
Type: Water/Psychic
Species: Hermit Crab Pokémon
Height: 1.6 m (5′03″)
Weight: 78.5 kg (173.1 lbs.)
Interesting Facts: Slowbro is a bipedal pokémon that evolves when a Shellder bits it's tail. Due to Shellder's poison, Slowbro can't feel pain. If Shelldon is knocked off, Slowbro will return to it's previous stage. Despite being accepted that Shellder triggers the evolution, in the games it has nothing to do with evolving Slowpoke into Slowbro. It is capable of powerful psychic attacks, but it is peaceful and prefer not to fight.

THE PAPER MODEL
Height: 14.8 cm / 5.8 in
Width: 18.1 cm / 7.1 in
Depth: 11.0 cm / 4.3 in
Pages: 4
Pieces: 50
Level: Medium
Designer: PODragon
Photo: LuIS
NOTES: Build by the numbers. Start at the mouth and build the head around it. Be careful when gluing the teeth, they're small, so as the claws. Finnish the body at the tail, where it will connect with the shell. Start the shell at the mouth and close at the top, glue the spikes as you go. Further instructions added on the template. There's an optional texture for this model with a tattoo, pdfs for the model with it and the extra texture are included in the pack.

Download: A4 / Letter

RAICHU V2

026 / RAICHU - Pokémon Papercraft
Name: Raichu
Type: Electric
Species: Mouse Pokémon
Height: 0.63 m (2'07")
Weight: 29.98 kg (66.1 lbs.)
Interesting Facts: Although Raichu is quite small, it is capable of storing over 100,000 volts of electricity in its body. Raichu is much more aggressive than Pikachu, especially if it has stored too much electricity in its body. It needs to constantly discharge this electricity through its tail into the ground, and will electrocute objects, people, and Pokémon until its electricity level is back to normal.

THE PAPER MODEL
Height: 12.2 cm / 4.8 in
Width: 22.0 cm / 8.6 in
Depth: 16.9 cm / 6.6 in
Pages: 4
Pieces: 38
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start at the head and glue the ears while you can still apply presure from the inside. The only tricky part of the head is to cut the curl of the ears, take your time there, after they are cut, glue them where there are two tabs, glue these tabs on the back of each other and glue the curl over them. After that, build the body, joining the arms and legs as you go. The tail is not hard, but it's heavy and can collapse with time, so after the tail is glued, glue some scrap paper on the connection to make it stronger. Close at the back, close to one of the legs.

Download: A4 / Letter

TURTWIG

387 / TURTWIG - Pokémon Papercraft
Name: Turtwig
Type: Grass
Species: Tiny Leaf Pokémon
Height: 0.4 m (1′04″)
Weight: 10.2 kg (22.5 lbs.)
Interesting Facts: Turtwig is a turtle like Pokémon, that usually nourishes itself through photosynthesis. The shell on it's back is composed of earth, and should feel moist if very healthy. The seedling on it's head will wilt if the Pokémon becomes thirsty. Turtwig is also the heaviest basic form starter, status both it's evolutions mantain.

THE PAPER MODEL
Height: 18.1 cm / 7.1 in
Width: 17.6 cm / 6.9 in
Depth: 9.2 cm / 3.6 in
Pages: 4
Pieces: 25
Level: Medium-Easy
Designer: Brandon
Photo: LuIS
NOTES: Start at the tip of the head and build by numbers, closing at the tail. Glue the leaves after the entire model is built. There are two tricky parts on this model: the area around the mouth and the shell. For the mouth, Fold the horizontal lines and glue pieces 7 and 8 together to the already built part. For the shell, don't glue pieces 11 and 12 to themselves as soon as you get to the body, do it as you proceed with the legs, only connecting them before gluing the last two pieces of the body. It takes some weight to stand, add it before closing.

Download: A4 / Letter

Other pictured models: Chimchar and Piplup

SNOWSHAWOTT

501 / SNOWSHAWOTT - Pokémon Papercraft
Name: Oshawott
Type: Water
Species: Sea Otter Pokémon
Height: 0.5 m (1′07″)
Weight: 5.9 kg (13.3. lbs.)
Interesting Facts: Look! It snowed! Someone must've built an oshawott snowman! ;) The design is based on a set of plushes that were released for Christmas a few years ago in Japan.

THE PAPER MODEL
Height: 16.0 cm / 6.3 in
Width: 9.9 cm / 3.9 in
Depth: 10.7 cm / 4.2 in
Pages: 4
Pieces: 23
Level: Easy/Hard (if you decide to build the optional neck round pieces)
Designer: Lyrin
Photo: Lyrin
NOTES: The model is really easy: follow the numbers and you won't have any problem. Pay attention to the mountain/valley folds of the shell, as it's the only challenging piece of the model. The model jumps to hard if you decide to build the round neck pieces, mainly because they are small. They are optional though, and you can either decide to skip them altogether, or to use some cotton balls to obtain the same effect.

Download: A4 / Letter

MEW V2

151 / MEW V2- Pokémon Papercraft
Name: Mew
Type: Psychic
Species:  New Species Pokémon
Height: 0.4 m (1'04")
Weight: 4.0 kg (8.8 lbs.)
Interesting Facts:  Mew is a pink, bipedal Pokémon, with large blue eyes. It has a long, thin tail ending in an ovoid tip. Curiously enough, it has hair, but it's so thin that can only be seen under a microscope. Mew is said to have the DNA of every single Pokémon contained within its body, and as such is able to learn any attack. It's capable of  traveling freely in the air or underwater. It's shown as intelligent, curious, playful and even selfless. Mew can make itself invisible, but It will show itself to a person who is pure of heart.

THE PAPER MODEL
Height: 20.0 cm/7.9 in
Width: 14.5 cm/5.7 in
Depth: 15.0 cm/5.9 in
No. of Pages: 3+3 for base
No. of Pieces: 29 + 4 of base
Level: Easy-Medium
Designer:  LuIS and POdragon
Photo: LuIS

NOTES:  Start it at the ears and build following the numbers. The fingers are small, so I included some color references at the tabs, tweezers are still indicated. It's important to build the tail as careful as possible, since if they get a weird position they might not fit well on the base. Close the model at the indicated place. The base is closed at the bottom. Also, there's a pink texture for the base, the shiny pdfs have it with this color.

Download: A4 / Letter