GLACEON

471 / GLACEON - Pokémon Papercraft

Name: Glaceon
Type: Ice
Species: Fresh Snow Pokémon
Height: 0.8 m (2′07″)
Weight: 25.9 kg (57.1 lbs.)
Interesting Facts: Glaceon is a fox-like creature covered in light-blue fur, which can be frozen into sharp quills. It appears to be wearing a tuque on its head. Glaceon's inner ears, two spots on its back, tail end and cap-endings are all rhombus-shaped and darker blue, in contrast to the soft cyan main body color. Glaceon's feet are also a dark blue color, giving it the impression of wearing boots.

THE PAPER MODEL
Height: 18.0 cm/ 7.1 in
Width: 15.8 cm/ 6.2 in
Depth: 19.2 cm/ 7.6 in
Pages: 5
Pieces: 50
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: Follow the numbers, being careful with the head. Attach the tail before the legs. Build the right back leg before the left (from bottom up), attaching it before building the left back leg from the bottom down, closing at the foot.

Download: A4 / Letter

MAGMORTAR

467 / MAGMORTAR - Pokémon Papercraft

Name: Magmortar
Type: Fire
Species: Blast Pokémon
Height: 1.6 m (5′03″)
Weight: 68.0 kg (149.9 lbs.)
Interesting Facts: Its legs are similar to Magmar's except that Magmortar has pink thighs and its legs are smaller in proportion to its body than Magmar's, whose legs are in proportion to its own body (which is why Magmortar moves slower than Magmar). Instead of a beak and two flame-like horns it had as a Magmar, Magmortar has pink lips and one singular flame on its head. Its other notable features are the two rows of pink spikes running down its back, red and yellow flame stripes on its body and a tail that is entirely covered in flames.
Magmortar also has orange shoulder pads that resemble flames and yellow, tubular arms with a black band and three claws on each one. When Magmortar prepares to attack with its hands, the claws may disappear into its skin, forming something similar to a cannon.

THE PAPER MODEL
Height: 20.9 cm/ 8.2 in
Width: 21.7 cm/ 8.5 in
Depth: 27.9 cm/ 11.0 in
Pages: 9
Pieces: 76
Level: Medium-Hard
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers, being careful with the head. Attach the tail before the legs. Build the tail from tip to base, the shoulders from top to base, and the arms from tip to shoulder. Attach parts as you go, as indicated by the numbers.

Download: A4 / Letter

GOLEM

076 / GOLEM - Pokémon Papercraft

Name: Golem
Type: Rock/Ground
Species: Megaton Pokémon
Height: 1.4 m (4′07″)
Weight: 300.0 kg (661.4 lbs.)
Interesting Facts: Golem's brownish-colored body resembles a boulder as it is covered by a layer of plated rocks. Golem has a head protruding out of the center of the shell, with short arms that have three claws and four-clawed legs. Unlike its previous forms, it has red eyes and its face appears much less 'rocky' and craggy in appearance, instead being somewhat turtle-like with two visible teeth in the lower jaw. As shown in the Pocket Monsters Carddass Trading Cards Golem's shell is hollow.

THE PAPER MODEL
Height: 17.2 cm/ 6.8 in
Width: 18.2 cm/ 7.2 in
Depth: 18.0 cm/ 7.1 in
Pages: 8
Pieces: 54
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: Follow the numbers, being careful with the appendages (arms, head, legs). Notes included.

Download: A4 / Letter

CUBCHOO (version 1)

613 / CUBCHOO - Pokémon Papercraft
Name: Cubchoo (Kumasyun)
Type: Ice
Species: Chill Pokémon
Height: 0.5 m (1′08″)
Weight: 8.5 kg (18.7 lbs.)
Interesting Facts: A Cubchoo's nose is constantly running. It inhales the mucus and uses it in its attacks. If it is in bad health, the mucus becomes watery, which powers down its Ice-type techniques. It evolves into Beartic at level 37.

THE PAPER MODEL
Height: 20.0 cm / 7.9 in
Width: 15.5 cm / 6.1 in
Depth: 16.3 cm / 6.4 in
Pages: 6
Pieces: 58
Level: Medium
Designer: PMF
Photo: PMF
NOTES: Use the instructions on the second page to build the model. Or as always, use Pepakura Viewer to the template in 3D.

Download: A4 / Letter

ACCELGOR

617 / ACCELGOR - Pokémon Papercraft
Name: Accelgor
Type: Bug
Species: Shell Out Pokémon
Height: 0.8 m (2'07″)
Weight: 25.3 kg (55.8 lbs.)
Interesting Facts: Accelgor has a large pink head reminiscent of a helmet, adorned with green stripes, a black star-like marking on the front, and a swirled shape in the back, with its eyes in a shadowed crevice giving the appearance of an annoyed pout. The rest of its body consists of blue, segmented cloth-like tufts, with ribbon-like extensions at the top of its back. Its arms appeared to be crossed, as if in an aggressive mood. It evolves from Shelmet when traded for a Karrablast. Neither evolves if at least one holds an Everstone during the trade.

THE PAPER MODEL
Height: 18.1 cm/ 7.1 in
Width: 28.4 cm/ 11.2 in
Depth: 10.8 cm/ 4.3 in
No. of Pages: 5
No. of Pieces: 45
Level: Easy-Medium
Designer: Brandon
Photo: Carnilmo
NOTES: Build from the head down, following the numbers and the notes inside the pack. Notes included in download.

Download: A4 / Letter

HEAT ROTOM (Oven)

479h / Heat Rotom  - Pokémon Papercraft
Name: Heat Rotom
Type: Electric / Fire
Species: Plasma Pokémon
Height: 0.3 m (1′00″)
Weight: 0.3 kg (0.7 lbs.)
Interesting Facts: Starting in Platinum, Rotom has five extra forms (each based on a household appliance), which can be accessed by possessing specific appliances. They are based on a microwave oven (Heat Rotom), washing machine (Wash Rotom), refrigerator (Frost Rotom), rotary fan (Fan Rotom), and a lawn mower (Mow Rotom). Rotom's eyes and aura of electricity will change colors when it changes form, but the aura remains the same color if it is Shiny

THE PAPER MODEL
Height: 9.4 cm / 3.7 in
Width: 19.8 cm / 7.8 in
Depth: 6.9 cm / 2.7 in
Pages: 2
Pieces: 14
Level: Easy
Designer: PMF
Photo: PMF
NOTES: It is pretty simple, just follow the instructions on the template.

Download: Heat Rotom

MANAPHY

490 / MANAPHY - Pokémon Papercraft
Name: Manaphy
Type: Water
Species: Seafaring Pokémon
Height: 0.3 m (1′00″)
Weight: 1.4 kg (3.1 lbs.)
Interesting Facts: Manaphy is a small, blue, aquatic Pokémon. It has stubby feet and club-like arms that are longer than its body. Manaphy has a red gem on its chest, and a yellow dot below the gem. Manaphy has an onion-shaped head with a pair of long blue antennae, which have small spheres on the end. Manaphy’s irises are dark blue, although the outermost portions of its eyes are yellow, with two yellow dots of “eyebrow” markings extending from the eyes. Eighty percent of Manaphy's body is made of water and is highly susceptible to its environment. One of these reactions is that when Manaphy reproduces in an ocean that's warmer than those that they are native to, the child will be a Phione as opposed to another Manaphy.

THE PAPER MODEL
Height: 14.1 cm/ 5.6 in
Width: 19.0 cm/ 7.5 in
Depth: 14.4 cm/ 5.7 in
Pages: 3
Pieces: 43
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from the tip of the antennae in, closing at the bottom of the feet. Be careful with the feet, arms, and antennae.

Download: A4 / Letter

BASCULIN

550 / BASCULIN - Pokémon Papercraft
Name: Basculin
Type: Water
Species: Hostile Pokémon
Height: 1.0 m (3'03″)
Weight: 18.0 kg (39.7 lbs.)
Interesting Facts: Basculin has the look of a typical fish, with its bottom part being green and its top part being black, the two parts being separated by a bright red or blue stripe, the rarity of each depending on which game it is encountered in. The red form has a round eye and spiky fins, the blue form has a thin eye and smooth fins. They both have a spiky dorsal fin and a big jaw.

THE PAPER MODEL
Height: 14.3 cm/ 5.6 in (B) - 13.0 cm / 5.1 (R)
Width: 9.1 cm/ 3.6 in - 12.0 cm / 4.7 in
Depth: 18.2 cm/ 7.2 in - 18.2 cm / 7.2 in
No. of Pages: 4
No. of Pieces: 19 (B) / 22 (R)
Level: Easy-Medium
Designer: PMF
Photo: Olber
NOTES: Build from the head to the tail, closing at the tail for both. Textures included are different from those pictured in the build picture.

Download: Blue: A4 / Letter Red: A4 / Letter

MANECTRIC

310 / MANECTRIC - Pokémon Papercraft

Name: Manectric
Type: Electric
Species: Discharge Pokémon
Height: 1.5 m (4′11″)
Weight: 40.2 kg (88.6 lbs.)
Interesting Facts: Manectric largely resembles a dog or wolf. It is blue in color and has a yellow mane on its head , as well as large yellow tufts of fur on its haunches and around its front feet.

THE PAPER MODEL
Height: 15.2 cm/ 6.0 in
Width: 15.0 cm/ 5.9 in
Depth: 18.0 cm/ 7.1 in
Pages: 4
Pieces: 67
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Notes and build instructions are included in the packs. Build from the head back, attaching legs and spikes as you go. Close at the tail.

Download: A4 / Letter

RHYPERIOR

464 / RHYPERIOR - Pokémon Papercraft

Name: Rhyperior
Type: Ground/Rock
Species: Drill Pokémon
Height: 2.4 m (7′10″)
Weight: 282.8 kg (623.5 lbs.)
Interesting Facts: Rhyperior can insert rocks and boulders into its arms through holes in its hands and then fire them like bullets. However, it will occasionally insert and fire Geodude by accident. They are monstrously powerful and are massively difficult to take down without a Water or Grass move.

THE PAPER MODEL
Height: 19.0 cm/ 7.5 in
Width: 26.4 cm/ 10.4 in
Depth: 24.3 cm/ 9.6 in
Pages: 10
Pieces: 74
Level: Hard
Designer: Brandon
Photo: Skeleman
NOTES: Follow the numbers, being careful with the rocky parts (belt and head) and when connecting the arms. Build the belt and attach it to the body before moving too far on. Close at the bottom of the feet, and attach the arms and teeth afterward. Try to reference the pdo if possible.

Download: A4 / Letter

CLEFAIRY

035 / CLEFAIRY - Pokémon Papercraft

Name: Clefairy
Type: Fairy
Species: Fairy Pokémon
Height: 0.6 m (2′00″)
Weight: 7.5 kg (16.5 lbs.)
Interesting Facts: Clefairy are very shy and timid creatures. As such, they rarely show themselves to humans. They are among the most intelligent of all Pokémon, being capable of forming society and religion. They are also capable of constructing various means of transport. Clefairy also seem to have gained a reputation as kleptomaniacs, since there have been various reports of Clefairy being seen stealing random junk.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 15.6 cm/ 6.1 in
Depth: 20.8 cm/ 8.2 in
Pages: 5
Pieces: 39
Level: Easy-Medium
Designer: Brandon
Photo: LuIS
NOTES: Pretty straight forward model, just follow the numbers and you'll be fine. Attach the arms after piece 16 is attached. It's suggested to fold the part that connects both the wings together. The tail can be tricky, here follow the numbers and when closing with pieces 33 and 34, keep the parts with the color blue open, so you can apply pressure from that small opening.
Attach the tail after the model is closed and use it to make the model stand on it's own: keep the body on a flat surface and connect the tail following the pdo, both the parts touching the surface.

Download: A4 / Letter

ABOMASNOW CHIBI

460 / ABOMASNOW - Chibi - Pokémon Papercraft

Name: Abomasnow
Type: Grass/Ice
Species: Frost Tree Pokémon
Height: 2.2 m (7′03″)
Weight: 135.5 kg (298.7 lbs.)
Interesting Facts: Abomasnow have the ability to sense snow from miles away. Not only can they sense it, but when Abomasnow get too angry or form in packs, they have the ability to create high and low pressure in the air resulting in small snow storms. Also, Abomasnow's feet allow them to clutch into the ground. Therefore, even the harshest winds cannot blow this Pokémon down.


THE PAPER MODEL
Height: 9.0 cm/ 3.5 in
Width: 7.2 cm/ 2.8 in
Depth: 8.6 cm/ 3.4 in
Pages: 1
Pieces: 19
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers while building. Build the head, and the body from neck to bottom. Attach the back cones as possible. Further notes included.
Default file is male Abomasnow, but textures are included to change from male to female. (Male=straighter front, Female=jagged front).

Download: A4 / Letter

TORTERRA V2

389 / TORTERRA - Pokémon Papercraft

Name: Torterra
Type: Grass/Ground
Species: Continent Pokémon
Height: 2.2 m (7′03″)
Weight: 310.0 kg (683.4 lbs.)
Interesting Facts: Despite their great size, these Pokémon are peaceful in nature and enjoy being with others of their own kind, preferring to bask in sunlight as they do not like to fight. When immobile, they look as if they are part of the ground upon which they rest, not as though they were a sleeping Pokémon. Because of this appearance, there are occasions when small Pokémon will gather and build nests on the shell of a stationary Torterra, who don't seem to notice or mind. When Torterra do move, they often migrate in herds in search of water. These herds give the impression of a moving forest.

THE PAPER MODEL
Height: 20.0 cm/ 7.9 in
Width: 17.8 cm/ 7.0 in
Depth: 27.3 cm/ 10.7 in
Pages: 10
Pieces: 77
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Pretty straight forward model, just follow the numbers and you'll be fine. Detailed notes included in pack. If you wish to make the ornaments, the pokeballs can be obtained from both Wes and Trainer Red's posts until a separate pack is made. A reference for how the ornaments were strung can be found here.

Download: A4 / Letter

Torterra v1

STARYU CHIBI

120 / STARYU - Chibi - Pokémon Papercraft

Name: Staryu
Type: Water
Species: Star Shape Pokémon
Height: 0.8 m (2′07″)
Weight: 34.5 kg (76.1 lbs.)
Interesting Facts: The core of a Staryu acts as a heart for the Pokémon. It glows brightly when it's healthy and happy. When it is excited, scared or angered it will flash, increasing as the emotion intensifies. If a Staryu becomes weak, its core will grow faint and will also flash slowly when it is very sick or near death.


THE PAPER MODEL
Height: 7.8 cm/ 3.1 in
Width: 8.2 cm/ 3.2 in
Depth: 4.7 cm/ 1.9 in
Pages: 1
Pieces: 13
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers while building. Additional notes included.

Download: A4 / Letter

MISMAGIUS CHIBI

429 / MISMAGIUS - Chibi - Pokémon Papercraft

Name: Mismagius
Type: Ghost
Species: Magical Pokémon
Height: 0.9 m (2′11″)
Weight: 4.4 kg (9.7 lbs.)
Interesting Facts: Mismagius is a purple ghost-like Pokémon that has the appearance of wearing a cloak. The three red spheres of Mismagius's necklace have a slightly elliptical shape to them, and its neck appears somewhat long and crooked. It has a round head and a large, elaborate, tufted feature atop it, the extremities of the tufts being a lighter color than most of the body. This feature resembles a witch's hat in shape. Mismagius has a skinny, red mouth that resembles a "W." There are extensions on the sides of Mismagius's lower body, the foremost ones looking more ragged in appearance than the ones in the back, that give Mismagius the appearance of wearing some kind of cloak.


THE PAPER MODEL
Height: 10.0 cm/ 3.9 in
Width: 6.9 cm/ 2.7 in
Depth: 7.5 cm/ 3.0 in
Pages: 1
Pieces: 18
Level: Easy
Designer: Brandon
Photo: Carnilmo
NOTES: Follow the numbers while building. Build the head, and the body from neck to bottom. Attach the head fins as possible.

Download: A4 / Letter

KINGDRA

230 / KINGDRA - Pokémon Papercraft

Name: Kingdra
Type: Water/Dragon
Species: Dragon Pokémon
Height: 1.8 m (5′11″)
Weight: 152.0 kg (335.1 lbs.)
Interesting Facts: Kingdra is a larger, more elegant version of Seadra. It has beautiful fins that wave in the water as it swims. Its head has a crest-like fin along its cheeks. Its head can also turn 360 degrees. Its belly scales are now more compact, unlike Seadra. The snout has also become thinner and more powerful, allowing squirts of water jets with devastating power.

THE PAPER MODEL
Height: 22.6 cm/ 8.9 in
Width: 9.0 cm/ 3.5 in
Depth: 18.6 cm/ 7.3 in
Pages: 3
Pieces: 33
Level: Medium
Designer: Brandon
Photo: Skeleman
NOTES: Follow the numbers, being careful with the head and fins. Close at the tail. Additional notes and references included.

Download: A4 / Letter

DIALGA CHIBI

483 / DIALGA - Chibi - Pokémon Papercraft

Name: Dialga
Type: Steel/Dragon
Species: Temporal Pokémon
Height: 5.4 m (17′09″)
Weight: 683.0 kg (1505.8 lbs.)
Interesting Facts: Dialga is a sauropod-like Pokémon. It is mainly dark blue with some gray metallic portions, such as its chestplate, which has a diamond in the center. It also has various light blue stripes. It has a somewhat wing-like structure on its back and a crest on its head, resembling a type of dinosaur. Dialga also has two horns on top of its head, two fang-like horns around its mouth, three spines on the back of its neck, long claws, and a short tail. The wing-like structure on its back can be used to focus the flow of time, as seen in Pokémon Mystery Dungeon: Explorers of Time/Darkness/Sky.


THE PAPER MODEL
Height: 10.0 cm/ 3.9 in
Width: 6.8 cm/ 2.7 in
Depth: 13.1 cm/ 5.2 in
Pages: 2
Pieces: 16
Level: Easy
Designer: Brandon
Photo: Skeleman
NOTES: Follow the numbers while building. Build the head, and the body from tail to head. Attach the fins as possible.

Download: A4 / Letter

SLOWKING

199 / SLOWKING - Pokémon Papercraft

Name: Slowking
Type: Water/Psychic
Species: Royal Pokémon
Height: 2.0 m (6′07″)
Weight: 79.5 kg (175.3 lbs.)
Interesting Facts: Slowking are Slowpoke who were bitten on the head by a Shellder. This is often the result of a Slowpoke holding a King's Rock because a Slowpoke holding this item will attract Shellder to bite its head, rather than its tail. The resulting poison that the Shellder secretes reaches Slowpoke's brain, causing it to become extremely intelligent. Upon evolving, the lighter-coloration on the tip of Slowpoke’s tail disappears, and, like Slowbro, Slowking has a scaled underbelly.

THE PAPER MODEL
Height: 15.0 cm/ 5.9 in
Width: 10.1 cm/ 4.0 in
Depth: 8.7 cm/ 3.4 in
Pages: 3
Pieces: 50
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Start by the shell and build from the top down, don't attach the teeth now,
only after it's attached to the body. Start the body by the top of the head
and work down. Build the arms and attach them at the end of the model, but
before attaching the shell. Close at the feet.

Download: A4 / Letter

PORYGON-Z

474 / PORYGON-Z - Pokémon Papercraft
Name: Porygon-Z
Type: Normal
Species: Virtual Pokémon
Height: 0.9 m (2′11″)
Weight: 34.0 kg (75.0 lbs.)
Interesting Facts: Porygon-Z is a modification of Porygon2. Porygon-Z appears similar to Porygon2, albeit darker in color. Most notably, its head is detached from the body and upside down, much like Porygon's legs, with no visible neck and yellow eyes with a dartboard pattern. Its bill is more round, and doesn't curve down as it did in its Porygon2 stage. Its legs are now wing-like, and its posture resembles that of a hummingbird. The tail is a little plumper, with the blue pattern on its chest no longer being isolated and now connecting to its legs/wings.

THE PAPER MODEL
Height: 23.4 cm/ 9.2 in
Width: 21.0 cm/ 8.3 in
Depth: 9.9 cm/ 3.9 in
Pages: 3
Pieces: 31
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from the head down, closing each piece at the bottom. Be creative when combining all the parts; suggestings are strings, toothpicks, a marrionette, or even just laying them out flat.

Download: A4 / Letter

WHISCASH

340 / WHISCASH - Pokémon Papercraft
Name: Whiscash
Type: Water/Ground
Species: Whiskers Pokémon
Height: 0.9 m (2′11″)
Weight: 23.6 kg (52.0 lbs.)
Interesting Facts: Whiscash are dark blue fish that are bulky in physique. They have huge cavernous mouths and long barbels that usually act as feelers. These barbels are even able to be manipulated like tentacles. They also have a marking on their foreheads that resemble a "W". They also possess a dorsal fin that, unlike other fish, is horizontal, much like a sea mammal's tail fluke. It's pattern vaguely resembles the pattern seen on the hive badge, given out by Bugsy.

THE PAPER MODEL
Height: 11.9 cm/ 4.7 in
Width: 14.6 cm/ 5.7 in
Depth: 19.0 cm/ 7.5 in
Pages: 4
Pieces: 31
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from the head backwards, closing at the tail. Work the tail from one side to the other, being sure to attach it before closing. Be careful with the fins and whiskers, and it should be a smooth build.

Download: A4 / Letter

DELCATTY

301 / DELCATTY - Pokémon Papercraft
Name: Delcatty
Type: Normal
Species: Prim Pokémon
Height: 1.1 m (3′07″)
Weight: 32.6 kg (71.9 lbs.)
Interesting Facts: Delcatty are medium-sized Pokémon with a mostly tan body. The sides of Delcatty’s head have a pointed, whisker-like protrusion. Delcatty have purple ears with three tufts of fur at the tips and a purple ruff-like collar with spherical extensions around their necks. Delcatty also possess a purple flower-like tuft of hair on the ends of their thin tails. Their build makes them seem related to the Eeveelutions Notably, their build also makes them look a lot more feline than their previous evolution.

THE PAPER MODEL
Height: 17.2 cm/ 6.8 in
Width: 11.9 cm/ 4.7 in
Depth: 21.0 cm/ 8.3 in
Pages: 5
Pieces: 51
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from the head backwards, closing near the bottom of the tail. Work the tail from the end to the body, being sure to attach it before closing.

Download: A4 / Letter

MAREEP

179 / MAREEP - Pokémon Papercraft
Name: Mareep
Type: Electric
Species: Wool Pokémon
Height: 0.6 m (2′00″)
Weight: 7.8 kg (17.2 lbs.)
Interesting Facts: Mareep is Pokémon which is based on a sheep. It has cream, messy wool covering its entire body, as well as curly tuft of wool in the middle of its head. Its head is blue, and it has black eyes with white pupils. Its feet are blue and have two digits on each foot, which also appears to always be on tip-toe. Its horns, presumed to be its ears, and tail have a yellow and black striped pattern. Mareep has an orange sphere at the end of its tail which acts a small lightbulb.

THE PAPER MODEL
Height: 10.0 cm/ 3.9 in
Width: 7.9 cm/ 3.1 in
Depth: 16.3 cm/ 6.4 in
Pages: 3
Pieces: 40
Level: Easy/Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from the head backwards, closing near the bottom of the tail. Attach the legs at the end.

Download: A4 / Letter

TROPIUS

357 / TROPIUS - Pokémon Papercraft
Name: Tropius
Type: Grass/Flying
Species: Fruit Pokémon
Height: 2.0 m (6′07″)
Weight: 100.0 kg (220.5.6 lbs.)
Interesting Facts: Tropius are large sauropod Pokémon with brown and green bodies. They possess large, broad green leaves on their backs which they use for flight. These leaves also double for sugar production via photosynthesis, to give Tropius even more energy. Despite being very big and bulky, they are surprisingly maneuverable in the air. They have long necks which they use for reaching treetops to gorge on their most favored food, fruits. They also grow fruits of their own on their necks which resemble a bunch of ripe bananas. These fruits can be picked and consumed by other Pokémon and by humans, and grow twice a year because of the rapid reproduction of sugar in their leaves, making the rapid production of the fruits in its neck. Their feet have toenails the same color as their fruit.

THE PAPER MODEL
Height: 26.6 cm/ 10.5 in
Width: 23.9 cm/ 9.4 in
Depth: 26.6 cm/ 10.5 in
Pages: 7
Pieces: 45
Level: Medium
Designer: Brandon
Photo: Toshi
NOTES: Build from the head down, closing at the bottom of the rear legs. Be careful with the bananas, as they can be tricky.

Download: A4 / Letter

LAVENDER TOWER GHOST

??? / MAROWAK'S GHOST - Pokémon Papercraft
Name: The Ghost of Cubone's Mother
Type: Normal
Species: Literal Ghost Pokémon
Interesting Facts: In Lavender Town, Team Rocket attempted to steal the skulls of all Cubone, in order to sell them for large amounts of money. One Cubone, however, was protected by its mother. The Cubone escaped, but its mother was killed. As a result, the Marowak's ghost remained in the Lavender Town Pokémon Tower, forbidding access to the topmost floor. She appears in disguise and is able to avoid all PokéBalls that are thrown at her. She is so scary, that opponent's Pokémon are too frightened to attack. However, her true form can be reveled with the use of a Silph Scope and subsequently battled. Once she has been defeated, her soul may find its peace and she can finally depart to the afterlife.

THE PAPER MODEL
Height: 16.0 cm/6.3 in
Width: 14.2 cm/ 5.6 in
Depth: 14.4 cm/6.7 in
Pages: 4
Pieces: 22
Level: Easy
Designer: POdragon
Photo: Skelekitty
NOTES: This is a really easy and fun model. Before gluing the first piece at the top of the head together, don't forget insert a long strand of micro-filament for it to hang with. To close, pop the tip of tail on with a generous amount of glue. After you have finished the body and the hands separately, use some superglue along the vertical back edge of the hands (where the wrist would be) and attach to the body. Hang from your ceiling and go "Wooooooooo!" *wiggle fingers*

Download: A4 / Letter

GIRATINA

487 / GIRATINA - Pokémon Papercraft

Name: Giratina
Type: Ghost/Dragon
Species: Renegade Pokémon
Height: 4.5 m (14′09″)
Weight: 750.0 kg (1653.5 lbs.)
Interesting Facts: Giratina is able to travel through and control dimensions besides those of time and space. When in its Origin Forme, it is able to pass through dimensions at will, however, it will turn back to its Altered Forme due to the gravity change from the Reverse World. It does so by emitting a whirlwind from its mouth which creates a portal.

THE PAPER MODEL
Height: 21.0 cm/ 8.3 in
Width: 31.0 cm/ 12.2 in
Depth: 23.5 cm/9.3 in
Pages: 9
Pieces: 84
Level: Medium/Hard
Designer: Brandon
Photo: LuIS
NOTES: Build from the tail on. Following the numbers here is really important. Build the legs and before attaching them to the body, glue all of the nails and yellow parts to them. On the middle yellow neck part build pieces 58 and 65, glue the wings to them and only after that glue pieces 59 and 66, after that is done, glue to the body. The head is easy just be careful to follow the numbers.

After quite some time, the wings may start to sag and need to be reinforced with wire or scrap to keep them up.

Download: A4 / Letter

GIRATINA CHIBI

487 / GIRATINA - Chibi - Pokémon Papercraft

Name: Giratina
Type: Ghost/Dragon
Species: Renegade Pokémon
Height: 4.5 m (14′09″)
Weight: 750.0 kg (1653.5 lbs.)
Interesting Facts: Giratina is able to travel through and control dimensions besides those of time and space. When in its Origin Forme, it is able to pass through dimensions at will, however, it will turn back to its Altered Forme due to the gravity change from the Reverse World. It does so by emitting a whirlwind from its mouth which creates a portal.

THE PAPER MODEL
Height: 11.0 cm/ 4.3 in
Width: 10.0 cm/ 3.9 in
Depth: 14.1 cm/ 5.6 in
Pages: 2
Pieces: 32
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Build from the tail on. Make sure to follow the number specially on the legs part. The yellow parts of the neck must be glued before the head is attached. Be careful on the ones that connect on the wings, build the main parts ( 19 and 25 ), glue the wings to it and after that glue pieces 24 and 26.

Download: A4 / Letter

GIRATINA ORIGIN FORME CHIBI

487 / GIRATINA ORIGIN FORME - Chibi - Pokémon Papercraft

Name: Giratina Origin Forme
Type: Ghost/Dragon
Species: Renegade Pokémon
Height: 6.9 m (22′08″)
Weight: 650.0 kg (1433.0 lbs.)
Interesting Facts: Giratina is able to travel through and control dimensions besides those of time and space. When in its Origin Forme, it is able to pass through dimensions at will, however, it will turn back to its Altered Forme due to the gravity change from the Reverse World. It does so by emitting a whirlwind from its mouth which creates a portal.

THE PAPER MODEL
Height: 9.0 cm/ 3.5 in
Width: 8.9 cm/ 3.5 in
Depth: 12.7 cm/ 5.0 in
Pages: 2
Pieces: 43
Level: Hard
Designer: Brandon
Photo: LuIS
NOTES: Build from the tail on. Make sure to follow the number specially on the legs part. The yellow parts of the neck must be glued before the head is attached. Be careful on the ones that connect on the wings, build the main parts ( 19 and 25 ), glue the wings to it and after that glue pieces 24 and 26.

Download: A4 / Letter

SHUPPET

353 / SHUPPET - Pokémon Papercraft
Name: Shuppet
Type: Ghost
Species: Puppet Pokémon
Height: 0.6 m (2'00″)
Weight: 2.3 kg (5.1 lbs.)
Interesting Facts: Shuppet roams about at night in cities, seeking such negative emotions as grudges and envy. If someone develops strong feelings of vengeance, Shuppet will appear in a swarm and line up beneath the eaves of that person's home. It retreats to its nest when the sun begins to rise.

THE PAPER MODEL
Height: 11.9 cm/ 4.7 in
Width: 6.4 cm/ 2.5 in
Depth: 6.5 cm/ 2.6 in
No. of Pages: 2
No. of Pieces: 13
Level: Easy
Designer: Brandon
Photo: Olber
NOTES: Build from the top of the head, following the numbers. Close at the bottom and insert the inner part of the body, sealing it.

Download: A4 / Letter

MIME JR CHIBI

439 / MIME JR - Chibi - Pokémon Papercraft

Name: Mime Jr.
Type: Psychic/Fairy
Species: Mime Pokémon
Height: 0.6 m (2′00″)
Weight: 28.7 kg (28.7 lbs.)
Interesting Facts: Mime Jr. has a knack for imitating others. It has been known to Mimic its foes in order to create distractions. Once the foe is confused, it'll quickly escape.

THE PAPER MODEL
Height: 11.0 cm/ 4.3 in
Width: 5.0 cm/ 2.0 in
Depth: 5.5 cm/ 2.2 in
Pages: 1
Pieces: 17
Level: Easy
Designer: Olber & Brandon
Photo: Olber
NOTES: Follow the numbers, closing with the back. Plop the top of the hat onto the head when complete, and the head onto the body when complete.

Download: A4 / Letter

GENGAR CHIBI

094 / GENGAR - Chibi - Pokémon Papercraft

Name: Gengar
Type: Ghost/Poison
Species: Shadow Pokémon
Height: 1.5 m (4′11″)
Weight: 40.5 kg (89.3 lbs.)
Interesting Facts: Gengar is a dark-purple furred Pokémon with a roundish body. Gengar's hands now connect to the rest of its body and it now has a pair of legs. Gengar has a spiky fur-covered back. Upon evolution, Gengar's eyes are now red. Also, its mouth is usually curled into a sinister grin.

THE PAPER MODEL
Height: 8.0 cm/ 3.1 in
Width: 8.1 cm/ 3.2 in
Depth: 6.6 cm/ 2.6 in
Pages: 1
Pieces: 19
Level: Easy
Designer: Brandon
Photo: Olber
NOTES: Follow the numbers, being a little careful with the spikes on the back.

Download: A4 / Letter

HAUNTER CHIBI

093 / HAUNTER - Chibi - Pokémon Papercraft

Name: Haunter
Type: Ghost/Poison
Species: Gas Pokémon
Height: 1.6 m (5′03″)
Weight: 0.1 kg (0.2 lbs.)
Interesting Facts: Haunter is a purple, ghost-like Pokémon with a roundish body. Haunter posesses a trio of spike-like protrusions on either side of its face, and what appears to be a tuft of messy fur hanging beneath it. It has triangular white eyes with tiny black pupils and a mouth with several sharp, purple teeth. Haunter has a pair of disembodied hands with three digits floating in front of it.

THE PAPER MODEL
Height: 8.4 cm/ 3.3 in
Width: 9.0 cm/ 3.5 in
Depth: 8.3 cm/ 3.3 in
Pages: 1
Pieces: 20
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers. You can leave the hands unattached if you chose, or glue them to the body.

Download: A4 / Letter

GASTLY CHIBI

092 / GASTLY - Chibi - Pokémon Papercraft

Name: Gengar
Type: Ghost/Poison
Species: Gas Pokémon
Height: 1.3 m (4′03″)
Weight: 0.1 kg (0.2 lbs.)
Interesting Facts: Gastly appears to be nothing more than a black ball of ghostly matter that is surrounded by a purple glow of smog. Gastly has big, white eyes and a mouth with a pair of fangs in it. Gastly's face is similar to Cloyster's, but the two Pokémon aren't related.

THE PAPER MODEL
Height: 6.2 cm/ 2.4 in
Width: 6.9 cm/ 2.7 in
Depth: 5.0 cm/ 2.0 in
Pages: 1
Pieces: 9
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers, and use the large cloud as a base.

Download: A4 / Letter

VULPIX CHIBI

037 / VULPIX - Chibi - Pokémon Papercraft

Name: Vulpix
Type: Fire
Species: Fox Pokémon
Height: 0.6 m (2′00″)
Weight: 9.9 kg (21.8 lbs.)
Interesting Facts: Vulpix is a small, fox-like Pokémon that has a red-brown pelt, brown, pupil-less eyes and six orange tails. Vulpix also has what looks like orange bangs across its forehead as well as locks. At birth, Vulpix has only one white tail, which apparently splits and grows more beautiful and warmer as it grows older. Vulpix has a cream underbelly, and brown feet with lighter-brown colored paw pads. Vulpix also has a flame inside its body that never goes out.

THE PAPER MODEL
Height: 6.9 cm/ 2.7 in
Width: 7.2 cm/ 2.8 in
Depth: 8.3 cm/ 3.3 in
Pages: 1
Pieces: 11
Level: Easy
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers, building the head, tail, and body separately. Attach the head to the body, then tail to the body.

Download: A4 / Letter

MR. MIME

122 / MR. MIME - Pokémon Papercraft

Name: Mr. Mime
Type: Psychic/Fairy
Species: Barrier Pokémon
Height: 1.3 m (4′03″)
Weight: 54.5 kg (120.1 lbs.)
Interesting Facts: Mr. Mime has a round, white body with a red spot in the middle. Its light-pink arms and legs are connected to its body by red spheres. Mr. Mime has white, five-fingered hands and black feet that curl upward at the end. Mr. Mime has a pink head with red cheeks and blue, frizzy hair.

THE PAPER MODEL
Height: 17.9 cm/ 7.0 in
Width: 19.4 cm/ 7.6 in
Depth: 15.5 cm/ 6.1 in
Pages: 6
Pieces: 67
Level: Medium
Designer: Brandon
Photo: Olber
NOTES: Follow the numbers, being a bit careful with the arms and legs, especially the hands. Close at the back of the legs as indicated by numbers. Put a little weight in the center of the body to make it more stable. Multiple textures included for facial changes, need pdo to use the textures.

Download: A4 / Letter

GOLBAT

042 / GOLBAT - Pokémon Papercraft

Name: Golbat
Type: Poison/Flying
Species: Bat Pokémon
Height: 1.6 m (5′03″)
Weight: 55.0 kg (121.3 lbs.)
Interesting Facts: Golbat has a large mouth with four fangs. It now has a small pair of eyes. Golbat has a short pair of legs that possess only one toe each, and the tails it possessed as a Zubat seem to have disappeared. Golbat's ears are much smaller compared to Zubat's, being triangular in shape and having ear insides that do not appear chambered. Golbat's wings, unlike Zubat, also only have one 'finger' instead of two.

THE PAPER MODEL
Height: 16.3 cm/ 6.4 in
Width: 30.7 cm/ 12.1 in
Depth: 8.9 cm/ 3.5 in
Pages: 4
Pieces: 26
Level: Medium
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers, being a bit careful with the way the wings and ears go together. Close at the bottom, and attach the feet. Put a little weight in the tongue to make it stand. Further instructions included in the pack.

Download: A4 / Letter

GOLBAT CHIBI

042 / GOLBAT - Chibi - Pokémon Papercraft

Name: Golbat
Type: Poison/Flying
Species: Bat Pokémon
Height: 1.6 m (5′03″)
Weight: 55.0 kg (121.3 lbs.)
Interesting Facts: Golbat has a large mouth with four fangs. It now has a small pair of eyes. Golbat has a short pair of legs that possess only one toe each, and the tails it possessed as a Zubat seem to have disappeared. Golbat's ears are much smaller compared to Zubat's, being triangular in shape and having ear insides that do not appear chambered. Golbat's wings, unlike Zubat, also only have one 'finger' instead of two.

THE PAPER MODEL
Height: 6.3 cm/ 2.5 in
Width: 14.0 cm/ 5.5 in
Depth: 4.5 cm/ 1.8 in
Pages: 1
Pieces: 16
Level: Easy
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers, being a bit careful with the way the wings and ears go together. Close at the bottom, with the attaching of the feet.

Download: A4 / Letter

ZUBAT CHIBI

041 / ZUBAT - Chibi - Pokémon Papercraft

Name: Zubat
Type: Poison/Flying
Species: Bat Pokémon
Height: 0.8 m (2′07″)
Weight: 7.5 kg (16.5 lbs.)
Interesting Facts: Zubat is a small, blue bat-like Pokémon. It has two long, skinny legs. Zubat's face lacks any eyes and a nose. The insides of Zubat's ears and undersides of its wings are purple. Zubat's wings are supported by elongated 'fingers', and four teeth can be discerned from inside its mouth, two on the lower jaw and two on the upper.

THE PAPER MODEL
Height: 8.8 cm/ 3.5 in
Width: 7.5 cm/ 3.0 in
Depth: 8.5 cm/ 3.3 in
Pages: 1
Pieces: 20
Level: Easy/Medium
Designer: Brandon
Photo: LuIS
NOTES: Follow the numbers, being a bit careful with the way the wings and ears go together. Close at the bottom, and then attach the feet.

Download: A4 / Letter

HONCHKROW

430 / HONCHKROW - Pokémon Papercraft

Name: Honchkrow
Type: Dark/Flying
Species: Big Boss Pokémon
Height: 0.9 m (2′11″)
Weight: 27.3 kg (60.2 lbs.)
Interesting Facts: Honchkrow is roughly twice the size of its pre-evolution, Murkrow. Its feathers are mainly dark blue, while the underside of its wings is partially red. The tail's base is a white, cylindrical stalk, on which there is a growth of red feathers on the end. Honchkrow has a white and prominent crest of feathers on its chest that bears resemblance to a beard or cravat. Honchkrow has black feet with four toes, arranged in similar fashion as Murkrow's. Its head is supported by a broad and short neck. It has a slightly curved, yellow beak. The circular eyes have a white cornea and the pupils are red. It has dark blue eyelids. A large feather crest on its head makes it appear to be wearing a fedora hat that has spikes extending from the back. Its specific coat of feathers make it bear vague resemblance to a man dressed in a formal suit and a hat.

THE PAPER MODEL
Height: 21.0 cm/ 8.3 in
Width: 24.4 cm/ 9.6 in
Depth: 29.8 cm/ 11.7 in
Pages: 10 (3 additional pages for optional wings)
Pieces: 84
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers while building, and refer to the included Edge ID pdf if needed to be sure of how tabs line up. Definitely refer to the pdo if possible, as the spikes of the tail get a bit confusing. Close at the rear, adding the closed wing before completely closing the body. Attach the tail to the small 'feathers' on the rear. Last three pages include optional wings if you would like to modify the appearance by switching out wings. The wings included in the template on pages 7-9 are those featured in the picture. Choose one left wing and one right wing if you plan on switching around wings, regardless of which you choose.
Wings are labelled. Also, when building it with one open wing, a considerable amount of weight must be added to the rear of the body (near the tail, but not in the tail) in order to counter balance it. Additional instructions included.

Download: A4 / Letter

HONCHKROW CHIBI

430 / HONCHKROW - Chibi - Pokémon Papercraft

Name: Honchkrow
Type: Dark/Flying
Species: Big Boss Pokémon
Height: 0.9 m (2′11″)
Weight: 27.3 kg (60.2 lbs.)
Interesting Facts: Honchkrow is roughly twice the size of its pre-evolution, Murkrow. Its feathers are mainly dark blue, while the underside of its wings is partially red. The tail's base is a white, cylindrical stalk, on which there is a growth of red feathers on the end. Honchkrow has a white and prominent crest of feathers on its chest that bears resemblance to a beard or cravat. Honchkrow has black feet with four toes, arranged in similar fashion as Murkrow's. Its head is supported by a broad and short neck. It has a slightly curved, yellow beak. The circular eyes have a white cornea and the pupils are red. It has dark blue eyelids. A large feather crest on its head makes it appear to be wearing a fedora hat that has spikes extending from the back. Its specific coat of feathers make it bear vague resemblance to a man dressed in a formal suit and a hat.

THE PAPER MODEL
Height: 7.1 cm/ 2.8 in
Width: 6.3 cm/ 2.5 in
Depth: 8.5 cm/ 3.3 in
Pages: 1
Pieces: 17
Level: Easy
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers while building, building the head, hat, and body separately. Attach the parts in any order, being sure the tail rests to balance the model.

Download: A4 / Letter

MURKROW

198 / MURKROW - Pokémon Papercraft

Name: Murkrow
Type: Dark/Flying
Species: Darkness Pokémon
Height: 0,5 m (1′08″)
Weight: 2.1 kg (4.6 lbs.)
Interesting Facts: Murkrow is a small bird Pokémon with black feathers. Murkrow's shaggy, feathery tail bears the resemblance of the end of a broom, especially with the small, short, red-colored rod-like beginning segment of it. Murkrow has a crooked, yellow beak that resembles a witch's nose, a feather-crest that resembles a witch's hat and semi-circular eyes with red pupils. Murkrow’s neck seems thin in comparision to the size of the head it supports, with an extension of feathers on its neck like a collar. Murkrow has four toes on its yellow feet, three forward and one backward.

THE PAPER MODEL
Height: 18.0 cm/ 7.1 in
Width: 31.5 cm/ 12.4 in (includes second set of wings)
Depth: 18.2 cm/ 7.2 in
Pages: 3 (1 additional for optional 2D wings)
Pieces: 60
Level: Medium/Hard
Designer: Brandon
Photo: Toshi
NOTES: Follow the numbers while building, and refer to the included Edge ID pdf if needed to be sure of how tabs line up. Definitely refer to the pdo if possible, as the spikes of the tail get a bit confusing. Close at piece 48 (the chest). If you choose, you can opt for the simpler 2D wings included on the last page. Instead of making parts 20-37, make 57-60 and attach them in their place. Parts 57 and 59 will go in between the layers of 58 and 60, near the base of the wing, in order to create a '3D' surface to attach to the body.

Download: A4 / Letter

FLOATZEL

419 / FLOATZEL - Pokémon Papercraft

Name: Floatzel
Type: Water
Species: Sea Weasel Pokémon
Height: 1.1 m (3′07″)
Weight: 33.5 kg (73.9 lbs.)
Interesting Facts: Floatzel appears to be based on an otter or weasel, with two pointed blue fins on its arms and two tails, as with its pre-evolution, Buizel. The yellow flotation device it had as a Buizel appears to have grown and now functions as a boat. It gives the impression of a swimmer with a towel draped around its shoulders. If Floatzel laid on its back, the structure round its neck could also be interpreted as a sort of inflatable dinghy using its tails much like its pre-evolution, as a propeller and its fins as oars. The small fins on Buizel's forelimbs have grown into fully-fledged fins that are used for Razor Wind attacks. Its forelimbs and tails are tipped with cream coloration, and there is a teardrop-shaped orange pattern voided in Floatzel’s cream lower belly. Floatzel also has a circular cream spot in the center of its head, cream-colored eyelids and a pattern of two black triangles on the edges of its cream muzzle, unlike Buizel.


THE PAPER MODEL
Height: 19.8 cm/ 7.8 in
Width: 17.8 cm/ 7.0 in
Depth: 22.4 cm/ 8.8 in
Pages: 4
Pieces: 67
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers while building, and refer to the pdo if possible. Build from the head down, completing the tube, then the back before closing the bottom. Attach the tails before making the legs, and close at the bottom of the feet. Print piece 38 twice in order to build it as a different gender (Male=2 spots, Female=1 spot).

Download: A4 / Letter

LUXRAY

405 / LUXRAY - Pokémon Papercraft

Name: Luxray
Type: Electric
Species: Gleam Eyes Pokémon
Height: 1.4 m (4′07″)
Weight: 42.0 kg (92.6 lbs.)
Interesting Facts: Luxray are extremely vicious and predatorial, although when tamed and trained correctly they can become very loyal and faithful, protecting their Trainer from danger. They tend to be stubborn and can administer extreme amounts of power through their electricity. Because of their flawless x-ray like vision, practically nothing can go unseen by their eyes. Abusing a Luxray can cause it to become antagonistic and vengeful towards their Trainer. Luxray need a lot of compassion and praise to maintain their satisfaction, as they are proud creatures. While generally independent, Luxray may band together in large groups and look out for one another in the wild.

THE PAPER MODEL
Height: 19.8 cm/ 7.8 in
Width: 10.5 cm/ 4.1 in
Depth: 18.7 cm/ 7.4 in
Pages: 5
Pieces: 79
Level: Hard
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers while building, and refer to the included Edge ID pdf if needed to be sure of how tabs line up. Definitely refer to the pdo if possible, as the spikes get a bit confusing. Attach the tail and spikes before the rear legs, and close at the bottom of the feet.

Download: A4 / Letter

FLOATZEL CHIBI

419 / FLOATZEL - Chibi - Pokémon Papercraft

Name: Floatzel
Type: Water
Species: Sea Weasel Pokémon
Height: 1.1 m (3′07″)
Weight: 33.5 kg (73.9 lbs.)
Interesting Facts: Floatzel appears to be based on an otter or weasel, with two pointed blue fins on its arms and two tails, as with its pre-evolution, Buizel. The yellow flotation device it had as a Buizel appears to have grown and now functions as a boat. It gives the impression of a swimmer with a towel draped around its shoulders. If Floatzel laid on its back, the structure round its neck could also be interpreted as a sort of inflatable dinghy using its tails much like its pre-evolution, as a propeller and its fins as oars. The small fins on Buizel's forelimbs have grown into fully-fledged fins that are used for Razor Wind attacks. Its forelimbs and tails are tipped with cream coloration, and there is a teardrop-shaped orange pattern voided in Floatzel’s cream lower belly. Floatzel also has a circular cream spot in the center of its head, cream-colored eyelids and a pattern of two black triangles on the edges of its cream muzzle, unlike Buizel.


THE PAPER MODEL
Height: 9.0 cm/ 3.5 in
Width: 6.8 cm/ 2.7 in
Depth: 10.0 cm/ 3.9 in
Pages: 1
Pieces: 15
Level: Easy
Designer: Brandon
Photo: Brandon
NOTES: Follow the numbers while building. Build the head, the tube, the body, and tail, but do not attach them until all are built. Then attach them in the following order: Tube to Body, Head to Tube+Body, and then Tail at the end. Attach the fins to the arms after all of the parts are together.
Default file is female Floatzel, but textures are included to change from male to female. (Male=2 spots, Female=1 spot).

Download: A4 / Letter